How to set VPN server with static IP without DHCP on

I set up a new Mac mini server with OS X 10.9.1 and Server App 3.0.1
My ISP gave me a static bublic IP address.
I have on:
- web server
- mail server
- DNS server
without using DHCP, but now i want to set up L2TP/IPSec VPN server and it requires that i give start IP address of the VPN server.
Can i use VPN server w/out DHCP server on?
If yes, how?
If not, when i turn on the DHCP server, what i have to do with web, mail servers?

To run a public VPN server, you need to do the following:
1. Give the gateway either a static external address or a dynamic DNS name. The latter must be a DNS record on a public DNS registrar, not on the server itself. Also in the latter case, you must run a background process to keep the DNS record up to date when your IP address changes.
2. Give the VPN server a static address on the local network, and a hostname that is not in the top-level domain "local" (which is reserved for Bonjour.)
3. Forward external UDP ports 500, 1701, and 4500 (for L2TP) and TCP port 1723 (for PPTP) to the corresponding ports on the VPN server.
If your router is an Apple device, select the Network tab in AirPort Utility and click Network Options. In the sheet that opens, check the box marked
Allow incoming IPSec authentication
if it's not already checked, and save the change.
With a third-party router, there may be a similar setting.
4. Configure any firewall in use to pass this traffic.

Similar Messages

  • How to start VPN Server with PPTP + How to backup Addressbook Server

    Hey people,
    I currently have Lion Server running on my mac mini server, it was upgraded to Lion (server) from Snow Leopard server.
    Now i have 2 issues i'd like to address and ask your help for.
    1. VPN Server on Lion Server.
    I have had the VPN server running on Snow Leopard server without a problem, however, since my Lion upgrade it just isn't working with PPTP anymore.
    I did read alot of discussions here and also read that you can configure it through the terminal using the serveradmin tool.
    I have followed the instructions to get PPTP enabled, but it just isnt listening on the correct port, i don't see anything running nor can i connect from my Lion client to the server (i get server not responding).
    Does anyone experiece the same problem? or know how to solve this?
    2. Addressbook Server on Lion Server.
    I have a few network users on my system, they use the Addressbook server through their iphone/ipad.
    I don't know how to backup their contacts they added in the server, is there a way to backup the data?
    I have already tried to export the user using the Workgroup Manager, but when i look in the file, i don't see any additional info other then the user settings.
    I have been thinking of reinstalling the server to a complete fresh Lion only installation instead of the current upgraded Lion from Snow Leopard, that's why i need to backup the info.
    Time Machine backups of an upgraded Snow Leopard Server to Lion Server won't work on a fresh Lion Server installation, i have always had the problem that it can't read the data for some reason.
    Anyone know a solution for these 2 issues?

    Hi,
    In your base module MANIFEST.MF include Rest module in ATG-Required.
    It like,
    ATG-Required: DCS B2CCommerce WebUI Rest
    Hope it will work for you.
    Regrads
    Kumaresh Babu A

  • How to set up SAPconnect with email server

    Hi,
    Does any one know <b>how to set up SAPconnect with email server</b>
    We are using workflow and when it fails it we are sending the notification mail to the user on his company mail id, i.e. [email protected]
    This is working in the current production system. We are doing the new development which will replace the current production system. The existing Basis team does not know how it was setup in production system and how to set it up in the new system.
    When we send any mail notification from workflow we can see the mail in SCOT transaction but it is not received at the specified mail address.
    Can any one provide the configuration steps or any document for this.
    Thanks in advance..
    Pratik

    Hi Pratik,
    Check the following link:-
    /people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
    http://help.sap.com/saphelp_nw04/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
    these link will help u to config SMTP.
    And one more thing u have to do..
    Go to SE11 n open Table sxnodes in change mode.
    And change F_ESMTP field to false i.e. BLANK for the Field NODE = SMTP.
    Hope this will work For U.
    Regards
    Sachin Dhingra

  • How to set SQL Server Login MUST_CHANGE, CHECK_POLICY, CHECK_EXPIRATION all to OFF with T-SQL

    How to set SQL Server Login MUST_CHANGE, CHECK_POLICY, CHECK_EXPIRATION all to OFF with T-SQL.  SSMS will not allow me to change policies to OFF. Error: 15128 - The CHECK_POLICY and CHECK_EXPIRATION options cannot be turned OFF when MUST_CHANGE is
    on.  I am attempting to change these options in a test environment. Thanks, Richard

    It appears you have to change the password first(it could the same password but an alter command needs to be done)
    check this : http://www.sqldbadiaries.com/2010/11/07/the-check_policy-and-check_expiration-options-cannot-be-turned-off-when-must_change-is-on/
    http://sqldbpool.com/2012/10/08/the-check_policy-and-check_expiration-options-cannot-be-turned-off-when-must_change-is-on-microsoft-sql-server-error-15128/
    Hope it Helps!!

  • How setup SPA525 vpn client?How configuration Cisco VPN server?

    Hi all,
    How setup SPA525 vpn?
    How configuration Cisco VPN server for SPA525?
    Regards
    John

    Hi John,
    Do you want to setup the SPA525 on the UC300?  If so the UC300 does not support any VPN or remote users.  If you need configuration help with the UC5XX just let me know.
    Thank you,
    Jason Nickle

  • How  to integrate File Server with Portal??

    Hi all,
    can any one tell me that how interegate the File Server With Portal Server??
    In my portal server under home tab i have sub tab (second level navigation) of File server.Whe i click this tab it throws an syntax error
    ie
    System Error
    An exception occurred during the program execution. Below you will find technical information pertaining to this exception that you might want to forward to your system administrator.
    Exception Class  :: class com.sapportals.wcm.repository.NotSupportedException
    Exception Message  :: Not Implemented
    thease are the steps that i have taken
    >created HTTP System..
    >created WebDAV Repository.
    >Created Cache.
    >Created KM WebDAV System.
    >Created Iview and in iview i have to specify the <b>Path to Initially Displayed Folder</b>
    i have specified the folder of file server that i want to display..
    but i get the same syntax error ..
    infact i dint get that folder in KM.
    But when i specify the folder that is present in KM its Work fine..
    Now the Scnerio According to me is that File server is not integrated properly
    if it would be integrated properly i would be able to see the folder of File server in  KM...
    am i correct ??
    please Guide me to integrated the File Server Properly??
    Points will be given for any help..
    Regards
    Vinit

    Hi Vinit,
    if you want some Windows File Server integrated into Portal, please do not use a WebDAV Repository, but use the File System Repository instead. Therefore you need to configure the according Repository Manager. Please refer to this documentation:
    <a href="http://help.sap.com/saphelp_nw70/helpdata/en/ed/b334ea02a2704388d1d2fc3e4298ad/frameset.htm">Integrating Documents from a Windows System into KM</a>
    HTH,
    Carsten

  • How to register Essbase server with Shared Services?

    Hello All,
    How to register Essbase server with Shared Services?

    Hello All,
    How to register Essbase server with Shared Services?

  • How does create a server with multiple Clients ?

    Any people can lead me .
    How does create a server with multiple Clients ?
    Thanks

    For a multithreaded server you will need a thread to listen and at least one thread per client. If the conversation is half duplex, one thread per client works very well, if it's full duplex you will find one thread to send and one to receive much easier to program.
    I posted a Simple Socket Server that uses 1+2*clients threads.

  • HT3546 So i recently bought an Apple AirPort Extreme BaseStation (the mushroom shaped one) and was wondering if someone could tell me where and how to find a power cord and how to set it up with my Macintosh (2011 edition with 1.7.5) Thankyou! :)

    So i recently bought an Apple AirPort Extreme BaseStation (the mushroom shaped one) and was wondering if someone could tell me where and how to find a power cord and how to set it up with my Macintosh (2011 edition with 1.7.5) Thankyou!

    Welcome!
    Last question first, as we need to know what operating system that the Mac is using.
    If you are not sure, click the Apple icon in the upper left corner of the screen, then click About This Mac, and post back with the OS X Version number that you see there.
    Two possible solutions on the power cord
    ORIGINAL OEM APPLE AIRPORT EXTREME BASE STATION POWER SUPPLY AC ADAPTER A1202 if you want a white power supply and white power cord to match up with the Apple device
    AC adapter for Apple AirPort A1034 Extreme B... if you don't care what color the supply and cord might be
    If you don't already have a Setup Guide.....look here:
    AirPort Extreme Base Station Setup Guide v4.2 (Manual)

  • How to set this filters with 'or' relationship

    Hi Pros,
          I have a query as follows, rows and columns are all in structures.
                                                       regular_employees
                 active_employees
                 lay_off_employees
         I want to set up filter as ' employ_status = 0 or employ_subgroup =2' for this query, please tell me how to set this filters with 'or' relationship.

    Hi Yifei,
    Create a formula and enter this (let's name this FORMULA_KF):
    ((EMPLOY_STATUS = 0) OR (EMPLOY_SUBGROUP = 2)) * enter value IF_TRUE + enter value IF_FALSE
    Then create the condition to HIDE the rows having those values to be filtered (if this is your purpose)..
    Like,
    FORMULA_KF <> 1
    Is this what you want mate?
    Regards,
    Loed

  • Anyone knows how to set VPN on iPhone?

    Hi everybody!
    Does anybody know how to set VPN on iPhone?
    Mine is iPhone 5.
    Thanks,
    Yohanes

    Actually, it's quite simple (I assume that you're on iOS 7 or above).
    1. Go to 'Settings' -> 'General' -> 'VPN'
    2. Click the 'Add VPN Configuration' tab
    3. You can ask your admin of which settings to use
    However, if you'd like to use a simpler method, follow this one.
    1. Go to 'App Store'
    2. Click the 'Search' icon, so that the search textbox is displayed
    3. Type in 'OpenVPN' and perform the app search
    4. Download the 'OpenVPN' app (because it's free, duh!)
    5. After you've successfully downloaded 'OpenVPN', open your Safari browser.
    6. Open this website address (www.vpngate.net)
    7. Select the country you'd like to use as your VPN setting
    8. Select the desired settings and click the 'Open in OpenVPN' link.
    9. The 'OpenVPN' app will be opened automatically.
    10. Click the '+' button to install the VPN setting.
    11. After the VPN setting is installed, switch the 'OFF' button to 'ON'
    12. If it's connected, then your VPN is ready to go
    Hope that works, enjoy!

  • How to connect message server with application server?

    How to connect message server with application server?

    Hello  Damodar,
    The connection is established at the time of installation only !!. At the time of installation you need to specify the Central Instance(message server in most cases unless you have a dedicated message-enque server).
    Regards.
    Ruchit.

  • How to set task description with paragraphs at runtime

    Hi Experts, How to set task description with paragraphs at runtime. Now, i can set single content in task description.however, not sure, how to set content which have paragraphs.

    Hi,
    You can use HTML tags in the Task descritption.
    Open the task not the workflow and there you can provide
    <p> content/containers </>
    You can use even <u>- Underlined text.
    <h> for bold text
    Thanks,
    Sarayoodharan.K

  • How to configure portal server with the Backend Oracle database

    Hi Portal Experts,
    we are planning to install Netweaver 04s sp stack 9 full java edition with Oracle 8i on windows platform.
    we have the installation docs of portal but we didn't have any idea about how to configure Portal server with the Backend Oracle database at the time of installation or after ost installation of portal.can anyone provide the documentation about this or guide me how to achieve this.
    PLZ share ur views---your help would be highly appreciable.
    Regds
    Phani.

    HI
    if you r working in Sap enterprise portal use for connection url
    jdbc:sap:sqlserver://ilsql01.tlv.sap.corp:1433;DatabaseName=Northwind
    ilsql01.tlv.sap.corp:1433 this is your portal url with port number
    Northwind is your database name.
    for dirver you need to give
    com.sap.portals.jdbc.sqlserver.SQLServerDriver
    in case if you r working on other than sap say windows along with oracle try to use
    Connection URL as jdbc:oracle:<drivertype>:@<database>
    Driver name as oracle.jdbc.driver.OracleDriver
    ex jdbc:oracle:thick:@localhost:3036:mydb
    Oracle implements two types of JDBC drivers:
    Thick JDBC drivers built on top of the C-based Net8 client, as well as a Thin (Pure Java) JDBC driver to support downloadable applets. Oracle JDBC drivers are used to create JDBC applications to communicate with Oracle databases.
    Oracle extensions to JDBC include the following features:
    Data access and manipulation
    LOB access and manipulation
    Oracle object type mapping
    Object reference access and manipulation
    Array access and manipulation
    Application performance enhancement
    *************if the information is helpful to you please reward points************

  • How to start Integration server with the user XISUPER

    Hi,
    How to start Integration server with the user XISUPER?
    Regards,

    Mahesh,
    In the post installation document, under Creating User XISUPER,
    I see the following,
    1.You must now log on to the Integration server host with the user XISUPER, to switch the initial password to a valid password.
    2.You must restart the J2EE engine to transfer the user creation to the J2EE immediately.
    I am unable to proceed here.Can you please help me to resume the post installation steps ?
    Thanks,

Maybe you are looking for

  • Deploying icons as jar file in Forms 9i

    We (Cancer Research UK) don't quite understand what is happening - We followed the guidelines in the white paper "Oracle 9IAs Forms Services - How to Deploy Icons" to deploy the images in a jar file: Altered the formsweb.cfg file to contain archive_j

  • Reprocessing of Production order/Process order

    Hi friends, Can anybody explain me what is reprocessing of production order. Plz explain me in a step by step manner. Thanks very much. Kind Regards

  • Quantity conversion from one unit to another

    Hello Experts, I need to convert quantity from one unit to another For eg: 1000kg to Grams. Is there any standard Function Module which can do so. Thanks.

  • Challenging Network Design

    I am going to attach a drawing and  offer up a challenge to anyone who wants to solve it.  I have two ways  on how to make it work. So here is the scenario. 1) This is a  transit network. That means there are objects that circumnavigate a  known path

  • Get weekday of DD/MM/YYYY

    I thought I'd almost got here with this script set ShotDate to do shell script "exiftool -s3 -DateTimeOriginal /Users/StudioA/Desktop/MJC_0025.JPG " log ShotDate set theYear to (characters 1 thru 4 of ShotDate) as text set theMonth to (characters 6 t