How to setup a newtork HD with my iMac

Hello to the forum,
I want to setup an ethernet HD with my home network so to be able to have access to files from both my iMac and mac mini.
I am using Snow Leopard 10.6.8
I have the following HD. https://discussions.apple.com/community/desktop_computers/post!input.jspa?contai nerType=14&container=2034
This HD has also the option to setup multiple RAID modes. Does anyone knows if I can manage and setup its Raid by using Disk Utility instead of WD software? What do I have to do in order to set it up properly ?
Thanks in advance.

What software will you use to access movies from your iPad wirelessly? Apple doesn't provide software to do this.
Your Ethernet drive should come with a manual with setup instructions.
The drive will usually be attached to your router via Gigabit ethernet.
Here is the link to the WD support page for your drive.
The Quick install guide will answer some of your questions.

Similar Messages

How to share contacts from ipad2 with older iMac running 10.6.2?

How to share contacts from ipad2 with older iMac running 10.6.2?

Well I guess I was too optimistic. Since last posting I have had three hang events, one during reboot. When the login dialog box came up I clicked on it and it hung.
However I do have a new data point. I have enabled the remote login (sshd). I have discovered that when the system hangs like I described above, I can still log in via SSH from my Windows system. The shell appears normal, but when I tried a "killall Safari" command the OS crashed hard. After a hard reset, the system hung during the login process. Again I could login remotely, and that time I executed a "sudo reboot" via the remote session. That cleared the display to all-blue but did not successfully reboot.
Can anyone suggest what to try via the remote login to help diagnose what is happening? I am familiar with typical Linux architecture but the differences in Mac OS X are leaving me a bit disoriented.

How to setup microsoft outlook 2011 with exchange server 2007

How to setup microsoft outlook 2011 for Mac with Exchange server 2007?

The folks who set up the Exchange Server should be happy to help you.

How to setup IVR in SPA9000 with SPA400

I had setup SPA9000 with SPA400, I can make outgoing and incomming calls, Incomming call can be transfer by press extentions,But i want to know how to setup IVR, for example, if someone call, system should give greetings and advice to choose extension with the name.Inaddition to that I want to put music on hold.Can some please help me out.

I can do you one better and teach you how to use the support pages at linksys:
1) Go to http://www.linksys.com
2) Click on "Support", then "Technical Support"
3) Click on "Choose a product"
4) Under "voice over ip" (the second row, in the middle) select "IP PBX" from the dropdown
5) In the dropdown to the left, select "SPA9000" from the dropdown
6) Under "Downloads" click on "Click here"
7) Then select the version number from the dropdown (if you got your device after 2006, it's most certainly a V2)
8) Now you can download the wizard, the user guide and the ivr manual (auto attendant quickinstall)
Or, the quicker way if you know what device you're interested in
1) Go to http://www.linksys.com
2) Click on "Support", then "Technical Support"
3) Under "Enter Model Number" type spa9000 and click OK
4) Continue at point 6) from the list above
There are two essential pieces to tracking down a problem with your VoIP equipment:
The configuration of every device involved
SIP protocol traces
And don't forget: there's no such thing as giving too much information when describing a problem.

How to sync my macbook pro with my imac?

I´ve bought a macbook pro and I want to sync data with my imac. How do I do?

If you mean copy files from one to the other you can connect the two via firewire cable and boot one into Target Disk Mode.

How do I use an iPhone with an iMac and a MacBook Pro?

I have an iMac, a MacBook Pro and an iPhone 4S. I will be travelling and would like to sync my iPhone with the iMac or MacBook, depending on where I am. I am on the cloud and manage my music manually. I'd like to be able to sync and download app updates via iTunes. Currently I sync via the iMac, will I lose my music if I attempt to sync the iPhone with the MacBook?
Thanks (and, yes, I know there is an obvious answer somewhere but I can't find it)
Kron Dos

I was afraid of that. That's why I posted the question before trying to sync and losing everything. Too bad as I just bought a MacBook Pro and would really like to have mirrored devices across the board. Either Appke's technology isn't up to it or they have some obscure secrecy reason to prevent it.
Kron Dos

How to setup Cintiq 12wx along with dual monitors (3 displays total)

I’m considering purchasing a Wacom Cintiq 12wx. I currently run the latest LR and Photoshop CS5 with two NEC P221W monitors (which I keep color-calibrated) on Windows 7, set up with my desktop extended across both displays. They are both running at their native 1680 x 1050 resolution (and I want to keep them that way). My video card is a GeForce 8800 GT. Dell XPS 630i.
I want to run the 12wx (whose resolution is 1024 x 1280) in addition to the above setup. The best advice I can find so far on the web is to get another (cheaper) NVidia card to run it. Sounds right to me. My question (assuming this is the way to go): how should/can the Windows desktop/monitor setup be configured to handle this?
My desired Lightroom result is:
* grid/develop view of image on my main NEC
* image only on the second NEC (F11) – this is what I have so far
* editable view of the image on the Cintiq
My desired Photoshop result is:
* editable image view only (well, mostly) on my main NEC
* tool panels etc. on the second NEC (configured via Workspace) – this is what I have so far
* editable view of the image on the Cintiq
Has anyone done this, if so how? Also, I’m hoping I can color-calibrate the Cintiq as well as the two NECs, thoughts?
Thanks.

Thank you Grant for the quick response. Well, it seems I don't know what I'm doing.
So, Mac Pro doesn't have any video INPUTS just Outputs. CHECK.
That is correct I have a six-input-port-selector with one input (SWITCH C2G). CHECK.
What I want is to be able to toggle through the inputs from the HDMI Switch C2G. That way I can use all my devices (Mac Pro, Xbox, PS3, Cable Box) with these monitors.
Since the Switch C2G only has one OUTPUT Slot, I'm thinking I just need to connect the monitors to the Switch C2G Output slot by using a 2 to 1 HDMI Adapter, but wouldn't I lose the true potential of these monitors by not connecting them directly to the Mac Pro?
Currently, I have the monitors hooked up with Thunderbolt/Mini Display Adapters to the Mac. So I guess I would just have to run just one HDMI with Thunderbolt/Mini Display from the Mac to the Switch C2G, and connect the other devices to the Switch as well.
Jeez. Am I right?
What If I get an HDMI Switch with 2 Outputs instead of getting the 2 to 1 HDMI Adapter or perhaps a 4 to 2 Adapter. Heck. I'm not sure what to do here.
I would really appreciate anyones help.
Thank you.

How to setup an ikev2 VPN with public key authentication with your BB10 device

This setup will allow you to run a VPN between your BB10.2 (and probably BB10.1) device and a debian linux computer (I am running the testing stream). You will need to tweak this config (and possibly install strongswan server on your LAN's gateway) to get access to network resources, or access the internet via the VPN. I have created this setup with the intention of accessing files/services on the debian computer only.
1. Install strongswan on your debian machine(I have v4.6.4 installed, I think the current testing version is v5.1. If you install v5+, some lines in the config may be obsolete), and install any other extra packages you are prompted to install:
apt-get install strongswan strongswan-ikev1 strongswan-ikev2 strongswan-starter openssl ipsec-tools
2. Generate certificates on your debian server in any, starting with a certificate authority. Edit the C= O= CN= fields to whatever you want:
ipsec pki --gen --outform pem > caKey.pem
ipsec pki --self --in caKey.pem --dn "C=CA, O=none, CN=Certificate-Auth" --san="Certificate-Auth" --ca --outform pem > caCert.pem
Generate a server keypair (again, editing the same fields as I indicated above. The CN= field should be lan ip address of your strongswan server. I would also put this as the address in --san=, or you can specify your hostname(if you have one, i.e. mydomainname.com):
ipsec pki --gen --outform pem > serverKey.pem
ipsec pki --pub --in serverKey.pem | ipsec pki --issue --cacert caCert.pem --cakey caKey.pem --dn "C=CA, O=none, CN=192.168.1.100" --san="192.168.1.100" --flag serverAuth --outform pem > serverCert.pem
Generate a keypair for your BB10 device (choose a CN=, and use it in the --san field @your server lan ip or hostname:
ipsec pki --gen --outform pem > userKey.pem
ipsec pki --pub --in userKey.pem | ipsec pki --issue --cacert caCert.pem --cakey caKey.pem --dn "C=CA, O=none, CN=bb10" --san "[email protected]" --flag serverAuth --outform pem > userCert.pem
3. After generating your keys, package the client keys for your BB10 device(you will be asked to create a password): openssl pkcs12 -export -in userCert.pem -inkey userKey.pem -out bb10.pfx
Copy the bb10.pfx file, and serverCert.pem to your BB10 device and import the certificates into the certificate store(Open Settings --> Security and Privacy --> Certificates --> Import)
4. Move the certificates into the appropriate folders on your debian server:
mv caKey.pem /etc/ipsec.d/private
mv caCert.pem /etc/ipsec.d/cacerts
mv serverKey.pem /etc/ipsec.d/private
mv serverCert.pem /etc/ipsec.d/certs
5. Enable ip forwarding on your debian machine:
edit /etc/sysctl.conf - change the following value as follows:
net.ipv4.ip_forward=1
Close the file and save changes. To enable changes, type: sysctl -p /etc/sysctl.conf
6. Edit config files:
          ipsec.secrets:
: RSA serverKey.pem
        ipsec.conf:
config setup
        strictcrlpolicy=no
        uniqueids=yes
conn %default
        ikelifetime=60m
        keylife=20m
        rekeymargin=3m
        keyingtries=1
        keyexchange=ikev2
        leftfirewall=yes
        dpddelay=30
        dpdtimeout=120
        dpdaction=clear
conn bb10
        mobike=yes
        ike=aes256-sha1-sha1-modp1024!
        esp=aes256-sha1!
        left=%defaultroute
        leftid="C=CA, O=none, CN=192.168.1.100"
        leftcert=serverCert.pem
        right=%any
        rightsourceip=10.10.0.1
        rightid="C=CA, O=none, CN=bb10"
        rightauth=pubkey
        leftauth=pubkey
        pfs=yes
        auto=add
7. Start the ipsec service on your debian machine: service ipsec stop; service ipsec start
8. Set up the VPN connection on your blackberry: Settings -->Network Connections --> VPN --> Add.
a) Profile Name: Give your VPN a name
b) Server Address: Enter your server's address
c) Gateway Type: Generic IKEv2 VPN Server
d) Authentication Type: PKI
e) Authentication ID Type: Identity Certificate Distinguished Name
f) Client Certificate: The client certificate you imported should show up in the dropdown
g) Gateway Auth Type: PKI
h) Gateway Auth ID Type: Identity Certificate Distinguished Name
i) Gateway CA Certificate: Find the certificate authority you imported. If you used the same name as I did above when creating the certificate, if will be called "Certificate-Auth".
j) Perfect forward secrecy : ON
k) Change IKE Lifetime to 3600
l) Change IPSEC lifetime to 1200
You can leave everything else on default settings. Save your VPN profile.
9. Connect to your VPN. You should now be able to ping both ways between your blackberry and debian host. Using the above configuration, your blackberry device will have the ip address of 10.10.0.1.

There have been numerous bb10 updates (now 10.2.1.2977) since I first posted this mini how-to-I am not sure if it was the bb10 updates, or updates to strongswan (now v5.2.0) or my linux kernel (v3.15.3), though I am now able to use stronger hash and elliptic curve key exchange. I am using sha384 in my example, though have also got it working with sha512. Give it a try:
Simply use the same process I detailed before, though change the following lines in ipsec.conf:
ike=aes256-sha1-sha1-modp1024!
esp=aes256-sha1!
to
ike=aes256-sha384-ecp521
esp=aes256-sha384-ecp521
Be sure to restart strongswan after you change these lines in the config.
After this is done, change 'Automatically determine algorithm' to off in the VPN profile settings of your VPN connection profile on your blackberry. I'm not sure why it doesn't work automatically. State the following in this section:
IKE DH Group: 21
IKE CIpher: AES (256-bit key)
IKE Hash: SHA384
IKE PRF: HMAC-SHA384
IPSec DH Group: 21
IPSec Cipher: AES (256-bit key)
IPSec Hash: SHA384

HT2497 how to setup airport to work with IPV6

How can I setup my AE to work with IPV6 that was launch last night in the east coast? Or there is no need for me to do anything on my AE because it will setup itself automatically?
Thanks,
TCFL

IPv6 service comes in a variety of "flavors" so it would be difficult to provide you with exact configuration settings for your AirPort router.
I would first check with your ISP to see if they have implemented IPv6 service. If they have, they should provide you with what requirements must be satisfied to use IPv6.

How to setup Glashfish 2.1 with sun crypto hardware inside T2 processor

Dear Expert,
I had setup comm 7 at guest os (ldom guest) on sun fire t5240 , All running well (mail,calender,im) , I also read
http://wikis.sun.com/display/BluePrints/Taking%20Advantage%20of%20Wire-Speed%20Cryptography
Does any body have guide step by step How to integrated glasshfish with sun Cryptography hardware ?
thanks
Hadi

singautara,
SLIM is trying to tell you that SUSE 9.x will just not work.
Period.
SUSE 9.x is for Intel and AMD chips and the computers that use them. Your Ultra-60 does not have x86 compatible components in it.
It does not have a BIOS. It has an OpenBootProm .
The last distribution ever ported by SUSE to Sun's SPARC cpu architecture was something like version 7.3. That is from 5 years ago !
What's wrong with the Operating Environment that was developed by the same company that manufactured your computer?
Use the SunOS on the Sun system !
http://sunsolve.sun.com/handbook_pub/Software/
Tell you what ...
Find the "Related Documentation" link at this page in the Sun System Handbook and research what sort of system you have.
http://sunsolve.sun.com/handbook_pub/Systems/U60/U60.html

How to setup discoverer to work with portal in future

Hi,
I have to setup the environment for a discoverer 10g R2 based reporting application.
The application is supposed to display reports on the portal that is hosted on Oracle 10g AS.
I started with installation of Oracle 10g R2 DB server. I have the Oracle BI suite 10g , Oracle 10g AS, Oracle 10g Portal etc with me.
Can someone guide me as to how should I proceed in the installation step-wise so as the repoting application can be hooked on to the AS and displayed in portal.
The slight catch here is there is a separate team working on developing the portal.
I need to know what is to be done so that there is a smooth merger of discoverer with the portal.
Thanks
Goga

Hi
The interaction between Discoverer and Portal takes place after you have installed the full-blown application server. Stand-alone Discoverer cannot be made to hook into Portal.
When you install the full application server you need an infrastructure database. You either do this manually by inserting the repository components into an existing database or you use the seeded database that comes with the install. Personally, I prefer the seeded approach.
After you have installed the infrastructure you run the installer a second time and install the middle tier. While you can install the infrastructure and middle components onto the same machine, performance is better if you use different machines. However, if you are only trying to test things out, doing all of this on one machine would be ok.
After you have got your middle tier components installed (Discoverer and Portal), make sure they are working. For Discoverer you will need to have an EUL. For Portal you only need to be able to connect to it.
Next, and only now comes the link between Discoverer and Portal. All you need to do is tell Portal that the link is to be enabled. This is called creating a portlet provider.
To create a portlet provider for Discoverer follow this workflow:
1. Connect to Portal as Portal user
2. On the top right, click the Administer tab
3. You will see three further tabs, this time on the left, called Portal, Portlets and Database
4. Click the Portlets tab
5. Locate the Remote Providers box on the top right hand side
6. Click Register a Provider
7. In Provider Information enter the following:
a) a name - for example Discoverer
b) a Display name - for example Discoverer
c) Timeout - for example 30 seconds
d) Timeout message - for example Please try again later
e) In implementation Stype select Web
f) Click the Next button
8. In General Properties enter the following:
a) In URL type http://hostname:port/discoverer/portletprovider
Eg. http://server1.learndiscoverer.com:7778/discoverer/portletprovider
You may need to omit the port on some systems so that it would look like this:
http://server1.learndiscoverer.com/discoverer/portletprovider
Note: type discoverer/portletprovider as stated
If you do need a port and are unsure as to which port number to enter follow this workflow:
i) Launch a second browser window
ii) Type http://hosntame:1811 (or whatever is the AS Control port on your system) and press Enter
iii) In username enter ias_admin and the associated password
iv) When authenticated, you will see the Farm for your infrastructure and mid tier
v) Cick on the mid tier instance (you may need to enter your ias_admin username and password again)
vi) Click the Ports link alongside the word Home at the top of the screen
vii) Note the port number for your HTTP Server Listen(non-SSL) port
viii) Close AS Control and go back to the portlet provider setup
b) Check the box Web provider in same cookie domain as the portal
c) Leave other defaults as they are and scroll down to section called User/Session Information
d) In User/Session Information check User and specify that the frequency should be Once per user session
e) Click the Next button
8. In Grant Access leave this alone and click the Finish button
9. If you get a warning about the cookie domain click the OK button
10. Exit Portal
You have now successfully created a portlet provider for Discoverer
To test that this is working enter one og these in your browser window:
If using ports:
http://hostname:port/discoverer/portletprovider
If not using ports:
http://hostname/discoverer/portletprovider
The system should respond with Congratulations! You have successfully reached your Provider's Test Page
Does this help?
Regards
Michael

How to setup Multilingual Shopping Cart with same currency?

Hi Everyone,
I would like to ask if it is possible to setup a shopping cart where the prices for the products are staying in the same currency but the language of the cart is changed.
Example:
Setting up a shopping cart for a New York located Hungarian Bakery where we give an option to teh visitor to choose language.
Off course I will create 2 sets of pages for English and Hungarian but when they get to the point of buying a product
they will enter to the shopping cart catalogs, etc...
Since the store will only deliver to the United States, we have to keep the currency in $US, not to change to Hungary's official currency (Forint),
but I would love to change the language of the shopping cart text to Hungarian, example: Catalog>Cookies ideally changed to Katalogus>Sutemenyek.
Since the number of layouts for catalogs, product views and shopping cart are limited;
Should we use javascript to replace text everywhere where it occurs?
If we do this, How can you detect which languages where are currently using?
Another direction: Is Liquid Layout will suits better?
Liquid have limitations for the number of layouts?
Is Liquid become an official supported Alpha ever?
**I didn't started to experience on Liquid yet cause BC states that it is not recommended for production sites, only a Beta testing environment still...
thank you for all of you if you can take time and answer my questions for the benefits of all of us,
nova*
cvmweb.com

Liam,
Thank You for caring to get back to me! You rule!
by the way, I have the jquery translator opened in another tab the results to Hungarian are funny though...
There is so much NO in BC land
Crucial things that BC supposed to address fast (i know that i am talking to myself here )
- more than one layouts for catalogs and products (is that so hard to scale this system)
**the time we are waiting for basic functions was enough to assembly a programmer team and build out the system
entirely, based on PHP and MySQL so we can join developers and make million useful plugins, widgets!
- add filters by tags to sort by price, weight, name, etc ...
- enable multiple shipping addresses
- add RMA functions (return merchandise)
- integrate with shipworks or make a plugin for BC so we can automate order processing, labels, tracking number postbacks...
I ran into something every week and the answer is always wait and not possible
nova*
www.cvmweb.com

How to setup CVI 6.0 with Clearcase?

I've been using Microsoft Visual Source SAfe with CVI before and it was very easy to setup and use. Now I need to convert to Clearcase. My CVI has automaticaly detected Clearcase SCC provider, but then CVI wants me to point to a Clearcase project, and all I have is VOB in Clearcase with no project. Does anybody know how to fix it? I'm using Base Clearcase and I've read a little about UCM Clearcase. Do I need UCM?

I found the solution myself. CVI wants to be pointed to some .ini file in order to use source control functionality, but as I mentioned above there is no project-ini file in Clearcase, while there is one under Visual Source Safe. Create an empty .ini file anywhere you want and point CVI to this file under Source Code control after you select Clearcase as your SCC provider. Now put you CVI project under Clearcase and you'll be able to check in/out files from CVI.
Regards,
Konstantin

How to setup ERMS to work with Webforms?

Hello,
we want to use webforms, so that customers can post requests via internet. The webforms will be send by the webserver internal via email as XML-Attachment to SAP-CRM. I can't find any documentation about how to make CRM(5.0) read the informations from this webform and to use these informations for routing with ERMS or even the creation of activities. The ERMS_how_to and ERMS_guide_for_consultants I allready know, but it's only written there, that it is possible and not how. Do I need to setup TREX and a knowledge base also for these functionalities?
Right now it's only possible for us to route these email by subject (created automatical by the webserver)
Will reward points for needfull help. Thx
Carsten

Hello,
we want to use webforms, so that customers can post requests via internet. The webforms will be send by the webserver internal via email as XML-Attachment to SAP-CRM. I can't find any documentation about how to make CRM(5.0) read the informations from this webform and to use these informations for routing with ERMS or even the creation of activities. The ERMS_how_to and ERMS_guide_for_consultants I allready know, but it's only written there, that it is possible and not how. Do I need to setup TREX and a knowledge base also for these functionalities?
Right now it's only possible for us to route these email by subject (created automatical by the webserver)
Will reward points for needfull help. Thx
Carsten

How to setup 2 iTunes Libraries with 2 different HD locations? HELP please!

I am so confused how this is supposed to work! I've searched all over the forums, Apple discussion board, and support section, and the only thing I can find tells you how to press the Option key when loading iTunes. DUH! That's the easy part! But how in the heck do you set up the libraries? Why is this not documented anywhere?
So basically I have a MBP, and ALL of my iTunes stuff is on an external USB hard drive. What I would like to do is have that external hard drive REMAIN as my main library, the one I sync my iPod, iPhone, Apple TV, etc... but would like to COPY my music files only (about 35GB) to my MBP on the internal drive, so I can have all MUSIC files with me. I would not sync with this library, just play it on my laptop on occasion. Isn't this do-able?
Where I am having trouble is this: I held down Option, loaded a brand new library, and figured I need to go in the Prefs and tell it where to get the music files, so I noticed it showed the external drive there. I changed it to my local folder, hoping that's where I would copy the music files to, but then noticed when I loaded iTunes and the MAIN library, it automatically changed my iTunes location to the new local drive I just set for the other library. This makes no sense to me as if iTunes forces you to have only ONE choice for the source of the files, what's the point of multiple libraries? I want a different location for each of the two libraries!
Clearly I don't have something set right, or I am missing a step. Can someone please help me ASAP?
Thanks in advance...
One more thing - what's the best way to copy my music only, to my local drive after setting this up? I tried opening iTunes and selecting all of the music files and dragging it to a local folder, and it got stuck for about 30 seconds then didn't do jack. I don't get why I'm having such a hard time with this.

I'll go play around with the Input Currency and the output currency.How can i play around in specific?
For transferring it to payroll you may need to thinking of attaching it to the correct >ledger.The Transfering is to GL by running conc. request 'Transfer is to GL'
are you going to pay the non local people in the local bank or in the foreign bank.All the employees are going to be paid through Local banks but the employees can have any type of Currency Account (i.e. It can be USD,EURO,RAND, etc...)
Thank you,
Chetan

How to setup a newtork HD with my iMac

Similar Messages

Maybe you are looking for