How to setup multiple Exchange accounts in Mail with the same username/password

Okay didn't see a place to ask a Mail question so I am placing this here.
I work for a helpdesk that requires me to monitor 4 different email accounts throughout the day. They are all Exchange accounts. The first one setups just fine but when I go to setup the others I get a message that states that the username and password are in use for the other account. Is there any way to setup multiple Exchange account when using the same LDAP creds for all the accounts?

Csound1,
I need to add a second Exchange account to my MBP using Mail.  Both accounts are with Rackspace, but each email address is unique (i.e., two different domain names).  When I use Preferences to attempt to add the second account, it recognizes the new credentials, finds the server and autopopulates the necessary address information.  But, as soon as I click "Done" after setting which functions are active on the account (mail, cal, contacts, etc.), the screen shows only my original Exchange account.  The new one is not added, yet there is no error message saying that it can't be added.  Any idea what is going on?  Shouldn't Mail be able to have multiple Exchange accounts, even if they are hosted via the same Rackspace server (in this case: connect.emailsrvr.com)?
Many thanks,
Wally
MBPR with Mavericks, Exchange 2012, Mac Mail

Similar Messages

  • How do i create more than one account in Mail with the same isp?

    I am using suddenlink and have set up one account for Mail. It seems to work ok. I want to set up two others with the same provider but can't.
    Let's call the first account, account1
    It works.
    I set up another and call it account2.
    It is using the same provider which already has the account set up on their end, but how do I set it up to work on my end? Does it need to use the same username as account1 or can it use the user name for account2? I hope this makes sense.
    I just want to use three email addresses from the same provider with mail. I need some help. Please?

    Initially you need to configure via the provider's own web based control panel multiple e-mail accounts. If they don't have one, work it out with their customer support to have three distinct mail accounts. Then you can setup multiple logins by adding new accounts to mail. Since mail checks all accounts per Mac OS X user account simultaneously, it probably is best to use different usernames on the same internet provider. If you don't want mail to show all the information from all three mail accounts simultaneously, configure Apple menu -> System Preferences -> Accounts to have multiple users on your computer, and configure each of the internet service provider accounts for each separaet user on Mac OS X.
    Message was edited by: a brody

  • TS3276 can you have multiple exchange accounts in mail in mountain lion

    can you have multiple exchange accounts in mail in mountain lion

    Just use IMAP for the accounts. I have 4 Exchange accounts in my Mail app and they are all set up that way. but yes, there can only be 1 Exchange account (which I believe has more to do with the Exchange API than Macs)
    hope this helps.
    Eric

  • How do I delete all of my mail at the same time?

    How do I delete all of my mail at the same time? Or is this even possible? Thanks for your help.

    Unfortunately it isn't possible. You have to select one at a time. You might want to add your name to the many that have requested this feature in the past.
    https://www.apple.com/feedback/ipad.html

  • Can anybody explain how to print multiple copies of different documents at the same time as at the moment I have to open each individually and press print

    Can anybody explain how to print multiple copies of different documents at the same time as at the moment I have to open each individually and press print

    is this a windows in bootcamp question ?

  • HT204074 Can multiple Itune IDs be associated with the same library?

    Can multiple Itune IDs be associated with the same iTunes library?

    Refer to this article:
    iTunes: How to share music between different accounts on a single computer
    http://support.apple.com/kb/HT1203

  • Is there a way of shifting purchases from one account to another with the same billing information, so that I don't lose purchases made by my iPhone when I sync?

    The AOL address I was using for my iTunes account has been deleted due to me not signing in for awhile and I'm afraid that I will lose all of my purchases made from my iphone when I sync it into iTunes for a much needed update and so that I can (hopefully) transfer its data to my new iPhone 4...
    The only time I have synced my current iPhone was when I activated it but since then I have not been able to sync with my computer and now have a new one.
    Sorry about the garbled way this is written but I desperately need help:
    1, Is there a way of shifting purchases from one account to another with the same billing information?
    Or
    2, is there a way of recovering my old account and changing the details?
    Any other help is greatly appreciated
    Thom

    You don't need to access your e-mail account, just get into your Apple account and change the e-mail address. If you can't access your Apple account, then you have a bigger issue to contend with.

  • I have a macPro 10.6.8. i have been receiving mail with the same date--March 14 and the same time--8:51am..I cannot correct:who knows the solution?

    I have a macPro 10.6.8. i have been receiving mail with the same date--March 14 and the same time--8:51am..I cannot correct:who knows the solution?
    Thank you.

    You may need to replace the Pram battery.

  • How to import my photos to Photos libray with the same folder name?

    how to import my photos to Photos libray with the same folder name?

    You can import  a folder of photos to the Photos.app by dragging the folder onto the Photos icon in the Dock. That will open an Import panel, and you can select to import all photos from the folder. But the folder name will be lost.
    The photos will appear in the "Last Import" album. Select them all in the Last Import and create a new album with the folder name (fFile > New Album).

  • How can I get "IMAQ Line Fit" stable (with the same points)

    How can I get "IMAQ Line Fit" stable (with the same points)
    I my vision applications I use a lot off times "IMAQ Line Fit"
    some times the results are not Stable.
    See vi and word document attached.
    When I take the same points but in a other order (sort)
    then suddenly all points are used.
    In this case I was looking for a edge in vertical direction (Y).
    I found the points but "IMAQ Line Fit" did not function well.
    I tried changing all settings like pixel radius and minimum score and
    also threshold and so on. But no result.
    Then I sorted the points reversed and that worked. See vi.
    I use labview Labview 8.6.0 and IMAQ machine vision.
    Maybe this problem is solved in a newer version.
    Please let me know.
    Thanks
    Attachments:
    TEST-imaq-line-fit-86.vi ‏169 KB
    IMAQ-Fit-Line-Problem-86.doc ‏230 KB

    Thank You for your reaction Hossein,
    This "one application" uses "Line fit" about 20 000 000 times a day.
    about 200 will go wrong. With your setting the the "Line fit" for this occasion will work but others will go wrong.
    A algorithm should be:
    1e Stable, when using the same points and settings the result MUST be the same. How the points are sorted should not matter.
    2e Accuracy
    3e Speed
    4e Testing. Is very difficult but al least close points and the same points and sorting ... should be done
    NI now as made a " IMAQ Line Fit" Problem CAR (Corrective Action request) 298016.
    so in the future there will be a update.
    In the mean while a made a line fit which uses Bisquare option from Linear Fit.vi :
      from C:\Program Files\National Instruments\LabVIEW 8.6\vi.lib\analysis\6fits.llb
    This is a temporary fix because "IMAQ Fit Line VI" is not so stable.
    Because outliers should be rejected only Bisquare does this reasonable.
    This program does NOT USE "Minimum Score" and "Pixel Radius"
    Valid fit = When there are enough points within Outlier_Distance.
    Algorithm steps:
    - Determine if line is more horizontal then vertical, Compare DeltaX with DeltaY
    - If DeltaX <= DeltaY then SWAP X Y and later Swap back
    - Sort Points at on X value
    - First : Bisquare Linear Fit
    - Calculate distances to the found line for all points
    - Inliers: Points within Outlier_distance
    - Outliers: Points outside Outlier_Distance
    - Only use Inlier Points
    - Check again if DeltaX < DeltaY then SWAP X Y later SWAP back again
    - Second : Bisquare Linear Fit only with the Inlier Points
    - Results are from the second fit
    Warning : This Program is Not so accurate and Not so fast
    See attachments it is in labview 8.6
    If some has a improvement please let me know.
    Thanks
    Attachments:
    svi_fit_line_Bsquare_and_draw.vi ‏18 KB
    Fit_Line_Bisquare_Linear.vi ‏40 KB

  • Outlook 2010/multiple exchange accounts/new mail notification on one only

    Hi, is there a way to have multiple exchange accounts in Outlook 2010 but just have new mail notifications on the first only?
    I tried having the first exchange account open an additional user, but running into memory errors as a result. Found the solution to that by adding them as separate accounts, but this creates noise with mail notifications, reminders, etc-
    Thanks in advance - Joe

    Hi,
    You can configure multiple Exchange accounts in Outlook 2010. For details on how to configure, you can refer to this article:
    http://blogs.msdn.com/b/outlook/archive/2009/08/25/multiple-exchange-accounts-in-outlook-2010.aspx
    Also, only the default mail store will get the new mail icon. You can use rules to pop up a desktop notification for the other accounts but the icon will only appear
    for the default account.
    Best Regards,
    Sally Tang
    TechNet Subscriber Support
    in forum
    If you have any feedback on our support, please contact
    [email protected]  

  • Multiple Exchange accounts in Mail.app - is this possible?

    Hi folks,
    I would like to start using Mail.app with my Exchange accounts.
    Now, does Mail.app support this feature?
    If not can it be at least set up in such a way that through one single Exchange account I can see my other exchange accounts by delegating all the privileges to that main exchange accounts and thus doing it indirectly?
    Thanks
    Alex

    Just use IMAP for the accounts. I have 4 Exchange accounts in my Mail app and they are all set up that way. but yes, there can only be 1 Exchange account (which I believe has more to do with the Exchange API than Macs)
    hope this helps.
    Eric

  • How do I convert multiple RAW files to JPEG with the same settings?

    I have a considerable number (800) RAW files to convert to JPEGs. I am happy to convert them in batches requiring similar settings to save time whilst of course, leaving the original RAW files to make more individual adjustments if required later.
    I thought there was a way of doing this in small batches to save time but can't recall how to do it. 
    Can anyone help?

    Many thanks Barbara and dj_paige.
    What I didn't mention is that I'm using PSE 5 with ACR 4.6, if its relevant.  I'm thinking of updating to the next version when its out in the hope that it will run with Windows 7 64 bit or I may go to Lightroom.
    I can now see that I can batch convert a whole folder of files using "process multiple files" as dj_paige suggested but that is too many at once as the settings I choose won't be relevant for all the pics in the folder. 
    I was hoping to batch convert say 5 or 6 similar photos at a time with the same settings. I'm not quite clear what you're suggesting but I'm hoping that its a "work round" using two stages to achieve this. 
    I can't see a list of open files within ACR to ensure that they are all selected as you suggest. 
    What does clicking Open rather than Done mean?  Does this amend the original RAW file to the settings selected so that if I then "process multiple files" on the whole folder to convert from RAW to JPEG they will in fact have already been processed in smaller groups so I can convert without applying any further changes?
    If so, what settings should I apply to "process multiple files" to ensure a simple conversion of file type rather than any further adjustments?
    Any further help on this would be much appreciated.
    Andrew

  • How do i set up a second ipad with the same apple id

    I bought two new iPad 2 's for my office.  They are for patient self check-in and I would like to set them both up with the same apple ID.  How do I go about setting the second iPad up once I finished setting up the first one?
    Thanks!

    Just like you did the first one.
    How to use multiple iPods, iPads, or iPhones with one computer
    http://support.apple.com/kb/HT1495http://support.apple.com/kb/HT1495

  • File to Mail with the same name

    Hi SAP Heros,
    Can somebody please tell me how to generate the same file name on the receiver mail adapter.
    Example
    File (file name =unknown.xml) -
    > XI -
    > Mail (file name =unknown.xml)
    I don't know the name of the sender file name , I only know the location so I have write *.xml in input file name but not sure how to  generate the same file name for mail adapter.
    My scenario is that I need to send the email with payload attachment but with with the same file name.
    Can somebody please help me in regards to this issue.
    Thanks,
    Iqbal

    Hello,
    I also had the same requirement and I too used adapter module.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/02706f11-0d01-0010-e5ae-ac25e74c4c81?quicklink=index&overridelayout=true. THis link will help you to create the module and implement in XI.
    Implement  the code which Stefan provided in the above link.
    Regards,
    Tiny Mampilly
    Edited by: TINY MAMPILLY on Jul 5, 2010 1:29 PM

Maybe you are looking for

  • CGI install under 6.1 on Solaris

              Have configured WL6.1 to use cgi from it's default web app -           I get the following error when I attempt to execute a script           Error 500--Internal Server Error           From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:

  • How to I get rid of the black outlined box that tells me everything I am clicking on?

    My friend pressed random keys on my computer, and now there is a rectangular square that is black and outlined with a white line, and whatever i put my mouse on, the black box tells me what i have clicked on. And then when I do click on something, it

  • What is the best practice to consume RMI Service

    hi , i have rmi solution client server i want to know which one is the best practice and more stable approach from one of the below. 1. initialize / consume the service once only maybe can do it in static block Example : static { //some object = Nami

  • About LCA Trace

    Hello Experts,     Can some one explain me what is LCA Trace? How and when it is generated and also a short note abt /SAPAPO/OM01 and /SAPAPO/OM01 transaction. Thanks in advance. Best Regards, Siva.

  • ABAP function module TH_POP_UP message

    Hi experts, I created a report that call function module TH_POPUP to users from a role. It works perfectly fine BUT the pop-up present a red cross, that might be confusing for users because a pop-up is sent if the job involved is successful or not. S


HashFlare