How to setup own voice for navigation?
I have downloaded the "Own Voice" guidance for navigation but seem to have lost my setting it up. Could anyone please help me find out how to set up my own voice? By that I mean, to record my own voice? All I can do as of now is choose "Own Voice" in the Settings -> Walk/Drive -> Voice Guidance. But where to RECORD my own voice?
Bubun (N8-00)
@Bubun_N8
This feature is no longer supported and only functions if you had previously created and saved your "Own Voice" recording after processing upon Nokia's servers which are no longer active.
This was outsourced application that Nokia eventually pulled the plug upon:http://betalabs.nokia.com/trials/nokia-maps-suite-2-0/review/48660/own-voice-for-nokia-maps-availabi...
Happy to have helped forum with a Support Ratio = 42.5
Similar Messages
-
How to setup the RV120W for quickvpn
Hello,
The PPTP client from Windows 7 is not working with this router; therefore I would like to try the quickvpn.
Is there any paper from Cisco explaining how to setup the RV120W for quickvpn ?
Thanks for any helpUser Guides for thee rv120W are here:
http://www.cisco.com/en/US/docs/routers/csbr/rv220w/quick_start/guide/rv220w_qsg.pdf
http://www.cisco.com/en/US/docs/routers/csbr/rv120w/administration/guide/rv120w_admin.pdf
and theres some more stuff over on my site:
http://www.linksysinfo.org/index.php?forums/cisco-small-business-routers-and-vpn-solutions.49/ -
How to setup IPV6 boundary for SCCM 2012 R2 Primary Site?
How to setup IPV6 boundary for SCCM 2012 R2 Primary Site?
I have Direct Access implemented in my environment. I have Windows 8.1 machine connecting through direct access.
I want to manage the windows 8.1 through SCCM. How do I setup IPV6 boundary. Can someone guide me through?
Below are the Windows 8.1 client IP Configuration
C:\Windows\system32>ipconfig
Windows IP Configuration
Wireless LAN adapter Local Area Connection* 3:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Wireless LAN adapter Wi-Fi:
Connection-specific DNS Suffix . : home
Link-local IPv6 Address . . . . . : fe80::7466:11a5:39ed:ffb0%4
IPv4 Address. . . . . . . . . . . : 192.168.1.5
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
Tunnel adapter isatap.home:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : home
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Connection-specific DNS Suffix . :
IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:79fd:1494:1339:93d6:439c
Link-local IPv6 Address . . . . . : fe80::1494:1339:93d6:439c%9
Default Gateway . . . . . . . . . :
Tunnel adapter iphttpsinterface:
Connection-specific DNS Suffix . :
IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000:e1a7:9cc8:c3c7:d819
Temporary IPv6 Address. . . . . . : fd64:fc00:d17b:1000:206c:f857:ddbe:2f2b
Link-local IPv6 Address . . . . . : fe80::e1a7:9cc8:c3c7:d819%10
Default Gateway . . . . . . . . . :
Below are the IPConfiguration details for Direct Access server
C:\Windows\system32>PsExec.exe \\MURA01 ipconfig
PsExec v1.98 - Execute processes remotely
Copyright (C) 2001-2010 Mark Russinovich
Sysinternals - www.sysinternals.com
Windows IP Configuration
Ethernet adapter Ethernet:
Connection-specific DNS Suffix . :
IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:3333::1
Link-local IPv6 Address . . . . . : fe80::b1ad:1c29:b4a:9125%15
IPv4 Address. . . . . . . . . . . : 10.192.1.25
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.192.1.1
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter isatap.{3D6A5E86-D85A-46C8-B69B-FFCF6D5D849C}:
Connection-specific DNS Suffix . :
IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1:0:5efe:10.192.1.25
Link-local IPv6 Address . . . . . : fe80::5efe:10.192.1.25%18
Default Gateway . . . . . . . . . :
Tunnel adapter 6TO4 Adapter:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter IPHTTPSInterface:
Connection-specific DNS Suffix . :
IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000::1
IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000::2
IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000:2552:e9f8:87d3:ed8e
Link-local IPv6 Address . . . . . : fe80::2552:e9f8:87d3:ed8e%20
Default Gateway . . . . . . . . . :
ipconfig exited on MURA01 with error code 0.
Below are the IPCONFIG Details for SCCM Server:
C:\Windows\system32>PsExec.exe \\sccm01 ipconfig
PsExec v1.98 - Execute processes remotely
Copyright (C) 2001-2010 Mark Russinovich
Sysinternals - www.sysinternals.com
Windows IP Configuration
Ethernet adapter Ethernet:
Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::9f0:86f9:441d:bc07%12
IPv4 Address. . . . . . . . . . . : 10.192.1.30
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.192.1.1
Tunnel adapter isatap.{0749E47D-AE0A-4D47-9D37-BDDC848E56F6}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
ipconfig exited on sccm01 with error code 0.
What will be the IPV6 values to configure boundary?Depending on how the clients connect use the IPv6 prefix of their 6to4, Teredo, and/ or IP-HTTPS tunnel. Just keep in mind that it could become a long list...
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude -
How to setup SSL cert for SharePoint apps in a three tier farm with nlb
I am having trouble understanding how to setup the SSL certificate on SharePoint apps or in general its configuration
Please check the below thread..
https://social.technet.microsoft.com/Forums/sharepoint/en-US/53465d30-10b2-48c9-9541-5ade738156b4/how-to-setup-ssl-cert-for-apps
Don't forget to mark it as an Answer if it resolves your issue and Vote Me as helpful if it useful.
Mahesh -
How to setup Data guard for SAP database?
Can someone please tell me how to setup data guard for SAP databases?
Thanks,
AbhiHi Abhi,
have a look at OSS 105047 - Support for Oracle functions in the SAP environment you find this under
14
Oracle Data Guard
You can use "Physical Standby".
You cannot use "Logical Standby".
You are allowed to use Fast Start Failover (FSFO) but SAP Support is not provided.
You can use Data Guard Broker.
You can use Maximum Performance Mode, Maximum Availability Mode and Maximum Protection Mode.
In the case of Maximum Availability and Maximum Protection, you must pay particular attention to a fast network connection in order to avoid performance problems.
Maximum Protection causes the primary database to terminate if problems occur in the standby database.
And here you find on Oracle white paper from 2010 http://www.oracle.com/us/solutions/sap/wp-ora4sap-dataguard11g-303811.pdf
Perhaps some SAP user have answers for you http://scn.sap.com/community/oracle/content?query=guard
regards
Kay -
SAP IDM 7.2: How to setup SSO functionality for WebUI of CRM and GRC?
Hello IDM-experts,
where can my customer find information about
SAP IDM 7.2: How to setup SSO functionality for WebUI of CRM and GRC?
Customer situation description:
The situation is that we are using SAP IDM 7.2. We are using a functionality to allow our users to access a webpage from where they can gain
SSO access to the Abap systems via the SAPGui. See screenshot as an example.
Now what we want is to access the CRM and GRC WebUI also with the same SSO possibility. We cannot find any guide/best practice on how to do
this or if it is possible via SAP IDM 7.2.
You can see a weblink in the first screenshot but it does not work. It will ask you for a username and password, see second screenshot.
Kind regards,
DanielaDo you know how the SAP GUI SSO is setup ? Is it using SNC/Kerberos ?
If it is (I suspect it is), then you will need to use similar method of authentication for the ICF Services. These cannot use SNC since they are accessed via browser, but what you want is possible.
Thanks
Tim -
How to setup my airport for music streaming
Hi all
I would like to use my iPhone and or iPad to stream music from Pandora and Spotify to my 5.1 (Wired) Speakers.
This question is similiar to this thread https://discussions.apple.com/thread/4153687 however i wanted some clarity and thought best to start a new discussion before pulling my hair out doing this the wrong way.
I have an unused Airport Express basestation (A1408) My current home setup is as follows:
Modem Router: (Netgear DGND3700) N600 Wireless ADSL2+ Dual band Gigabit
Home Theatre Computer: Windows 7 (Cat6 LAN Ethernet connection) NO LAN port
AV Reciever: (Onkyo TX-SR309)
5.1 Speakers: Wired connection to AV Receiver (NOT Airplay capable)
Laptop: Windows 7 (Cat6 LAN Ethernet connection)
My question is how to setup the airport, i understand it can be used to enable airplay streaming of music over the existing WiFi network, as these music streaming apps download and play music concurrently i would not want to have to switch between to two seperate WiFi networks. Should i plug the airport into the HTPC? I would need to purchase a LAN Splitter as the only LAN socket is already taken up with my cat6 connection. OR would i plug it directly into the modem/router? This second option is prefereable.
I have attached an image of my setup below. Any advice would be great, Regards Steve
[URL=http://s1293.photobucket.com/user/steve7677/media/homesetup_zps63eaf61c.jpg.html][IMG]http://i1293.photobucket.com/albums/b599/steve7677/homesetup_zps63eaf61c.jpg[/IMG][/URL]Still slightly confused, with the link you provided i chose scenario 2. All the other secanrios instructed i connect the airport express to my home stereo or powered speakers. As i dont have an aiport express only an airport extreme there is no audio jack and cannot connect it to the stereo/speakers.
option 2: Connecting to an existing Wi-Fi network as part of a roaming network
Ensure that the AirPort base station Ethernet cables are connected as above
I have done this and conected it via ethernet cat6 to the modem/router
Launch AirPort Utility 6.1. The Assistant will automatically configure the Roaming network
Im using windows 7 and cannot find this version of aiport utility, only 5.6.1 - The message comes up: Aiport utility was unable to find any airport wireless device. I am running this utility on my win7 HTPC (which is connected to my modem/router via cat6 LAN) The airport light is blinkng amber.
would you reccommend a hard reset of the airport? or can you provide a link for AirPort Utility 6.1.?
Regards -
How to setup a KDC for Kerberos Authentication
Hi,
I am new to Kerberos. I am trying to execute the sample codes on Sun site but i am not understanding how to setup a KDC.
Please help me.
Regards.Hi Alexander,
create the proxyauth.txt file in the roor directory of you MI Client installation and add the following paramters to the text file:
MobileEngine.Sync.Proxyuser= Username for Proxyserver
MobileEngine.Sync.Proxypw=Password for Proxyserver
Regards
Tahran -
How to Define own namespace for WebDynpro
Hi all,
I want to create a new WebDynpro Project in an own namespace. But during the creation process in NetWeaver Developer Studio I'm not asked for a namespace. I also didn't found any property here to configure the namespace.
The result is that all WebDynpro projects refer to namespace "local".
How can I configure the namespace of new WebDynpro projects?
regards
RenéNamespace is configured in your http://<hostname>:<port>/sld
It is quite an elaborate process and I request you to go to
http://service.sap.com/netweaver
On the left hand side, check for Netweaver 04. Look in the How-to guides of NW04 for WAS. They have neatly explained the process for setting up your track, development configuration, namespace and how to import this development configuration in your NWDS.
You may also refer to this help section :
http://help.sap.com/saphelp_nw04/helpdata/en/38/33eb9c3e1fe2409a9eba8246b933ca/frameset.htm
Regards,
Subramanian V. -
How to create own button for closed captioning
Hi,
I have created my own buttons for play, pause, exit etc. But I do not know how to create button to show closed captioning. I tried few hours but I give up. What I need to do?:
First clik - closed captioning will appear
Second clik - closed captioning will disapear.
And so on appear/disapear/appear/disapear
Help please!
PoulHave a look at: Toggle Shape buttons - Captivate 6 - Captivate blog
Replace the system variable cpCmndMute by cpCmndCC and you'll have the choice between different scenarios. -
How to setup Anonymous TP for Immediate ACK for HL7
All,
Can someone give me steps to setup Anonymous TP for Immediate ACK for HL7?
DipalRamesh,
I follow the concept, I am not quite sure about the steps. I am outlining the steps as per my understanding correct me If i am wrong.
- update existing TP "A" for ex to remove business action for ack.
- update exiting TP "A" for ex to disable FA
- Create Anonymous TP with business action Generic Ack and validation off.
- Set oracle.tip.adapter.b2b.defaultTP = Anonymous in tip.properties
oracle.tip.adapter.b2b.hl7.singleDC=true
oracle.tip.adapter.b2b.hl7.genericMessageType=ACK
oracle.tip.adapter.b2b.hl7.immediateAck=default
Would this be it? or am I missing any steps?
I am still not quite sure how would b2b know to respond to incoming message from TP "A" and send the MSH.10 value in ACK and datetime format we need.
Please let me know.
Dipal -
How to setup separate rington for each contacts?
Will someone point me to a tutorial or show me how to setup separate ring-tone for each contacts?
http://support.apple.com/kb/HT1413
Assign a ringtone to a contact
From Phone, tap Contacts and choose a contact. Tap Ringtone and choose a ringtone. When that person calls, you hear that ringtone. -
Can anyone tell how to setup audit trials for opm
HI,
how to setup audit trials function available in sys admin for OPM modules.
can any one provide steps to hav audit trials.Does the jaxp direcory have a jaxp.jar?
Add jaxp.jar to Classpath. -
ECXpert3.5- How to setup HTTP-SSL for xml protocol
Hi,
We are using ECXpert3.5 on Solaris box. One of our Trading Partner want to communicate through HTTP-SSL and we are doing XML/EDI mapping. Could you guide us what steps we need to take care to implement this.
How the external system will talk to ECXpert for transferring files.(We need the syntax for the URL). Could you suggest how to setup the HTTP SSL for XML protocol to receive xml files from remote system.
Thanks in advance for your help!
Regards,
Ravi.Hi,
We are using ECXpert3.5 on Solaris box. One of our Trading Partner want to communicate through HTTP-SSL and we are doing XML/EDI mapping. Could you guide us what steps we need to take care to implement this.
How the external system will talk to ECXpert for transferring files.(We need the syntax for the URL). Could you suggest how to setup the HTTP SSL for XML protocol to receive xml files from remote system.
Thanks in advance for your help!
Regards,
Ravi. -
How to setup local loopback for "Oracle 11g Release 2" installtion
Hi all,
I was trying to install the Oracle 11g Release 2 on Red hat 6 using Local Loop back configuration, but not able to install..
The contents of are:-
/etc/resolv.conf
# Generated by NetworkManager
nameserver 59.179.243.70
nameserver 203.94.243.70
and of /etc/hosts are:
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
and
System eth0 is having setting given below:-
IPV4 is set to " Automatic(DHCP)".
IPV6 is set to "ignore".
If i select system etho0 then host-name gets changed it becomes "dhcppc0".
i checked it using command host-name. and if i try to install with this configuration then during installation gives error of networking as host-name has been changed to "dhcppc0".
Please tell me what to do for local loopback configuration
Am i doing some thing wrong?
Thanksi am using "oracle Release 11.2.0.1.0" but same problem was there with oracle 10g on redhat 5.
Please tell me how to setup local loopback configuration so that i can use internet as well as oracle on same machine. otherwise for internet use i have to change my system ipV4 to automatic(DHCP). if i change it to automatic(DHCP) then oracle stop its working please tell me solution for both case.
I can not assign Static IP to IPv4, i earlier post i got recommendation to connfigure Local Loopback , but i am able to setup it.
what ever the setting i have done are given below:--
vi /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
vi .etc/resolv.conf
# Generated by NetworkManager
nameserver 59.179.243.70
nameserver 203.94.243.70
#ping localhost
PING localhost.localdomain (127.0.0.1) 56(84) bytes of data.
64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=1 ttl=64 time=0.048 ms
64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=2 ttl=64 time=0.073 ms
64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=3 ttl=64 time=0.037 ms
++++++++++++++++++++++++++++++++++++++++++++++++
error is------
[INS-06101]Ip address of localhost could not be determined
are you sure you want to continue?
Cause - The localhost is not mapped to a valid IP address in Hosts file (Eg. /etc/hosts in Unix).
Action - Assign a valid IP address for the localhost or set it to loopback IP address (127.0.0.1 in IPv4 or ::1 in IPv6).
Summary - dhcppc0: dhcppc0
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
log file lines are:--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Using paramFile: /database/install/oraparam.ini
Checking Temp space: must be greater than 80 MB. Actual 7471 MB Passed
Checking swap space: must be greater than 150 MB. Actual 3499 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
The commandline for unzip:
/database/install/unzip -qqqo ../stage/Components/oracle.jdk/1.5.0.17.0/1/DataFiles/\*.jar -d /tmp/OraInstall2012-05-29_05-13-01PM
Using the umask value '022' available from oraparam.ini
Execvp of the child jre : the cmdline is /tmp/OraInstall2012-05-29_05-13-01PM/jdk/jre/bin/java, and the argv is
/tmp/OraInstall2012-05-29_05-13-01PM/jdk/jre/bin/java
-Doracle.installer.library_loc=/tmp/OraInstall2012-05-29_05-13-01PM/oui/lib/linux
-Doracle.installer.oui_loc=/tmp/OraInstall2012-05-29_05-13-01PM/oui
-Doracle.installer.bootstrap=TRUE
-Doracle.installer.startup_location=/database/install
-Doracle.installer.jre_loc=/tmp/OraInstall2012-05-29_05-13-01PM/jdk/jre
-Doracle.installer.nlsEnabled="TRUE"
-Doracle.installer.prereqConfigLoc=
-Doracle.installer.unixVersion=2.6.32-220.el6.i686
-mx150m
-cp
/tmp/OraInstall2012-05-29_05-13-01PM::/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/OraPrereqChecks.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/jsch.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/instcommon.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/instdb.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/OraPrereq.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/ssh.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/prov_fixup.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/emocmutl.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/orai18n-utility.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/orai18n-mapping.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/installcommons_1.0.0b.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/cvu.jar:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/remoteinterfaces.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/OraInstaller.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/oneclick.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/xmlparserv2.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/share.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/OraInstallerNet.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/emCfg.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/emocmutl.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/OraPrereq.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/jsch.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/ssh.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/remoteinterfaces.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/http_client.jar:../stage/Components/oracle.swd.opatch/11.2.0.1.0/1/DataFiles/jlib/opatch.jar:../stage/Components/oracle.swd.opatch/11.2.0.1.0/1/DataFiles/jlib/opatchactions.jar:../stage/Components/oracle.swd.opatch/11.2.0.1.0/1/DataFiles/jlib/opatchprereq.jar:../stage/Components/oracle.swd.opatch/11.2.0.1.0/1/DataFiles/jlib/opatchutil.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/OraCheckPoint.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstImages.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp_de.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp_es.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp_fr.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp_it.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp_ja.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp_ko.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp_pt_BR.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp_zh_CN.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/InstHelp_zh_TW.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/oracle_ice.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/help4.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/help4-nls.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/ewt3.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/ewt3-swingaccess.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/ewt3-nls.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/swingaccess.jar::/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/jewt4.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/jewt4-nls.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/orai18n-collation.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/orai18n-mapping.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/ojmisc.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/xml.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/srvm.jar:/tmp/OraInstall2012-05-29_05-13-01PM/oui/jlib/srvmasm.jar
oracle.install.ivw.db.driver.DBInstaller
-scratchPath
/tmp/OraInstall2012-05-29_05-13-01PM
-sourceLoc
/database/install/../stage/products.xml
-sourceType
network
-timestamp
2012-05-29_05-13-01PM
INFO: Loading data from: jar:file:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Loading beanstore from jar:file:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Restoring class oracle.install.driver.oui.ConfigCmdMappings from jar:file:/tmp/OraInstall2012-05-29_05-13-01PM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Verifying target environment...
INFO: Checking whether the IP address of the localhost could be determined...
SEVERE: Unable to determine a valid IP for the localhost..
Refer associated stacktrace #oracle.install.driver.oui.OUISetupDriver:13
INFO: Completed verification of target environment.
WARNING: Verification of target environment returned with errors.
WARNING: [WARNING] [INS-06101] IP address of localhost could not be determined
CAUSE: The localhost is not mapped to a valid IP address in Hosts file (Eg. /etc/hosts in Unix).
ACTION: Assign a valid IP address for the localhost or set it to loopback IP address (127.0.0.1 in IPv4 or ::1 in IPv6).
SUMMARY:
- dhcppc0: dhcppc0.
Refer associated stacktrace #oracle.install.commons.util.exception.DefaultErrorAdvisor:16
INFO: Advice is WITHDRAW
WARNING: Advised to shutdown the installer due to target environment verification errors.
INFO: Adding ExitStatus PREREQ_FAILURE to the exit status set
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is -3
INFO: Shutdown Oracle Database 11g Release 2 Installer
---------------------------------------------------------------------------------------------
Maybe you are looking for
-
Iv locked my iphone with a 4 digit password and its disabled my phone what do i do
my son has put a 4 digit password onmy home screen and i have no idea how to turn it of but now my phone say disabled please hepl
-
Help, I've got a small CD stuck in my MacBook Pro. How do I get it out?
My tax guy sent me a tiny CD and, full of doubt, I stuck it in my MacBook Pro, where it remains. How do I get it out without taking apart my machine?
-
Re:Query for no.of days delayed using Receipt from production posting date.
Dear SAP Experts, I need a query to calculate no of days delayed by using Receipt from production posting date and prod.order due date..i have already done the query but there is no link for joining the tables.Is there any link to join the tables.. P
-
Foreign Trade - Incompletion Data
Hi, can anyone advise if this setting (tcode VI49) is pertainining to each shipto country? If we hv 10 export countries, then we need to setup this 10 times if we wan to turn off the incompletion check for all export countries? Is there a better way
-
Anyone know a work around? I am dependent on Adobe software and I can't get any work done...