How to setup the access duration for user

Dear experts,
As requrement of users, we need to setup the access duration for all users of our company . It's mean users only access into SAP on defined duration
Ex : Working time is 8h00 am to 17h00 pm, after 17h00 pm, users cannot access into system
Please help.
Thanks,
Neo

Hi all,
Thanks for your solution
We want to set the access duration for end-user but sometimes, we need to flexible to allow user access to system in some special case.
Let me detail users's requirements
- Users can access to SAP fom 8h00 to 16h00
- At 16h00, system will send the warning message to user to inform that system will aunomatic turn offf after 15 minutes, it's mean system will automatic kick out users after 15 minutes
- From 16h00 to 8h00, users can not access to SAP
- However, in some special case, we can grant the acess to system to specific user.
Can we setup these steps on SAP ?
Thanks,
Neo

Similar Messages

  • How to setup the Airport Extreme for PSP?

    Can anyone tell me how to setup the Airport Extreme for PSP? I have been searching the Discussions but none of the posting seems to explain detail enough. A step by step guide would be very appreciated. Thanks.
    PowerBook G4   Mac OS X (10.4.3)  

    Sorry, I forgot to mention a few points:
    1) I don't have the Airport Extreme base station;
    2) My PowerBook is connect to the internet thru wired connection with the Built-in Ethernet;
    3) The Airport is turned on, but my PSP's scan cannot locate the PowerBook at all (while it find someone else's network)
    So, I wonder if I can just connect my PSP to the built-in Airport in the PowerBook directly. So that I can have internet access on my PSP.

  • How to setup the access privilege of flash file in Web Intelligence?

    How to setup the access privilege of flash file in Web Intelligence?   WEBI can set access privilege for single WEBI report file, but it seem cano not set access privilege for one flash file.

    Thank you Maksim,
    I did set the "selectionMode" to "Auto". I don't understand where In supply function I have to set lead selection of nested node to first element. Please elaborate on this. Are you talking about the context attribute bound to the second table? OR do I have to change the Importing parameters "Node" and "Parent_Element" of my supply function?
    Thanks for your time.

  • How to setup the airport extreme for window xp

    How to setup the airport extreme for window xp

    Sorry, I forgot to mention a few points:
    1) I don't have the Airport Extreme base station;
    2) My PowerBook is connect to the internet thru wired connection with the Built-in Ethernet;
    3) The Airport is turned on, but my PSP's scan cannot locate the PowerBook at all (while it find someone else's network)
    So, I wonder if I can just connect my PSP to the built-in Airport in the PowerBook directly. So that I can have internet access on my PSP.

  • How to create the Access sequence for the Vendor+material+plant combination

    Hi all
    Please let me know How to create the Access sequence for the Vendormaterialplant combination..
    Whats the use? What its effect in purhcase and taxe..
    brief me please

    Hi,
    you are asked to maintain the access sequence for the tax condition for which you are putting 7.5%.
    goto OBQ1 or img..financial accounting new...global settings.... taxes on sales and purchases ......basic settings.....
    find the tax condition type. see in it which access sequence is attached.
    if there is none then use JTAX used for taxes in India.
    or you can create the similar one for your.
    to create the same goto OBQ2.
    new entry or copy JTAX.
    and assign the access sequence to condition type.
    this will resolve your problem if you just need to assign the access sequence.
    regards,
    Adwait Bachuwar

  • How can setup the outgoing email for ipad2?

    How can setup the outgoing email for ipad2?

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
     Cheers, Tom

  • How to setup the dad file for SSO.

    Hi
    We need to setup the dad file for SSO. Can any one help us to setup the dad file.
    Thanks,
    Arvind Goel

    Hi
    It seems that SSO is for AppEx Application Authentication only. You can't specify which Database User your application will connect to the database with if you are authenticating using SSO.
    I came up against this in the following thread.
    Re: How can an AppEX Application work with DB users referenced in DB Trigge
    G.

  • How to setup the cluster environment for BPM using weblogic

    want to setup the cluster environment for BPM using weblogic....
    i have installed the oracle weblogic server 10gr3 and oracle BPM enterprise for weblogic 10gR3
    i have used the Admin tools from the "oracle BPM enterprise for weblogic" to setup the configuration and create the weblogic domain servers.
    i can launch the process administrator and import the project exp file to domain server.
    but what should i do to setup cluster environment using weblogic?
    what i want to do is :
    setup one admin machine..
    setup two product machine..
    enable the cluster so the admin machine can monitor the status of the product machine..
    thanks a lot ...

    The install guide at http://download-llnw.oracle.com/docs/cd/E13154_01/bpm/docs65/config_guide/index.html gives a reasonable amount of info on how to do this.
    Personally I have not used the OBPM option to configure WebLogic instead I've used the information in the above install guide to create the weblogic domain in advance of configuring OBPM.
    Once you've setup WebLogic configure OBPM using the values I mention in the following thread: How to set the JMX Engine parameter in Process Administation?
    Let me know any specific config questions and I'll do my best to answer them for you.
    Thanks,
    Mike

  • How to setup the client application for the RMI?

    Question:
    I write a short program of RMI It contain server and client
    if server and client are run on localhost they are running ok
    but run client application on remote machine it occure issuses.
    How to setup the client on remote machine?

    hello Dhanraj K, for gmail accounts there shouldn't be much manual configuration required. please try to set it up like described in [[Add an email account to the Mail app in Firefox OS]]

  • How to setup the email application for my gmail account in firefox os.. I need the configuration steps for gmail.

    I don't know how to setup the email account sync in firefox os.. can anyone explain the steps to be followed for setting up a gmail account...

    hello Dhanraj K, for gmail accounts there shouldn't be much manual configuration required. please try to set it up like described in [[Add an email account to the Mail app in Firefox OS]]

  • How to setup the IM app for google talk 5800

    How to setup the builb-in IM app for gtalk?

    The Build-In IM can be used only with your Mobile Operator's IM service. You can use Fring (www.fring.com) or Slick (http://www.lonelycatgames.com/?app=slick) for Google Talk.
    Nokia 5800 Xpress Music + 8 Gb Nokia microSD class 6

  • Q: How can setup the approval hierarchy for Plan in ASCP

    Hi experts,
    We are implementing the ASCP. Our customer has a specific requirement about the approval hierarchy of the plan before the plan released. Can we setup the approval hierarchy for the plan in ASCP before releasing it like PO approval hierarchy.
    Thanks in advance
    Hieu

    There is nothing out of the box to do this.
    You have some customization options. It will be a little complex.
    1) Write a db trigger to change the status from approved to incomplete when records are inserted into the req import table
    2) Oracle provides a package which is a hook into the release process. The exact name of the package escapes me but it is something like msc_release_hook.
    This package is called after ASCP puts the data in the req. table but before the req import process is launched. Add code here that changes the status to incomplete.

  • How to get the groups info for user

    Hi guys i am new to ALUI..
    i am trying to do some enhancement.
    i want to know how to get the information of the users group and the group details using the IDK API?
    Can sombody share some code?

    Hello,
    You are welcome. Here is one way of get what you want:
    1) get all groups id's
    IPortletContext - >IRemoteSession -> IUserManager - > getCurrentUserGroups() -> int []
    2) get details about group
    IRemoteSession.getObjectManager(ObjectClass.UserGroup ) ->
    cycle over int []: {
    IObjectManager -> querySingleObject(comminity id) -> IObjectQueryRow -> getName()
    Because you are going to use PRC and make SOAP calls to portal don't forget setup WS to pass token to portlet (check WS settings)
    Edited by Bryazgin at 05/29/2008 7:48 PM

  • How to setup the fax function for a AOI device

    I read in several post on this forum that people get full print/scan/FAX functionality for the supported printers.
    In my case, I have a HP Photosmart C7280, which is full supported using the C7200 series drivers, including a FAX driver.
    Now, I add a printer in the 'Print & Fax' panel, and right away my printer shows up for bonjour. It finds automatically the correct driver, and works like a charm for printing and scanning, but... No Faxing whatsoever. Also no 'second' printer shows up, with 'kind' HP Fax, as several posts sugguest. Not after a few seconds, not after minutes. Using the 'Fax Devices' tab also doesn't show me any HP Fax device.
    So basically my question is: How do I setup the fax functionality in SL with my printer?
    Yes, it is connected over network, and the fax functions did work perfect over network with the 10.5 drivers from HP. Am I running into SL limitations? Does SL fax-drivers still support the (not optional, but default builtin) network functions of the C7280? Or... Am I just a noob that just can't find out how the setup a Fax device the obvious way
    Thanks
    - C

    Hello mscheidell,
    Yes, I was aware of the 'two' 7200 series drivers, but thank you for checking with me.
    Okay, now how did you 'add' your fax device for your printer? Did it show up a second version of your printer in the 'Add printer' box, with type FAX? Or did you just add the same 'found' printer again, but the second time with the FAX printer drivers (manual selected)?
    Right now, I only get one entry when I try to add my printer into SL: It find the Photosmart C7200 series with 'kind' Bonjour. That's the only thing that will show up in my 'found' printers, even after waiting a few minutes. People in these discussions are telling me there should show up a second 'found' printer with 'Kind' HP-Fax, but that just won't happen for me.
    I also tried to add the same found 'bonjour' printer again, and select manually the 'Photosmart C7200 series - fax' driver. SL tells me then there is already a print queue for that printer, but I tell SL to add this printer anyway. Then I have this C7200 series Fax device in my printing list. Using this driver seems to work fine, I can fill in fax recipients, but hitting the print button, caused the C7200 to spit out it's complete papertray, printed with bogus ascii signs only on the first lines of the page, instead of really faxing that document. So I concluded that this was not the right way to get the fax working....
    Thanks for all the help again.
    - C

  • How to change the font style for user profile information in My Profile page?

    Hello,
    In my profile page, user information is getting display as below:
    Name
    Title
    Department --> Would you please let me know how can I change style for Department ( Information Technologies) Attribute in this section ?
    Thanks and Regards,
    Dipti Chhatrapati

    Hi Romeo,
    I got your point and class I require to apply is as below:
    .ms-contactcardtext3 {
        font-family:
    Arial !important;
        font-style: italic !important;
    Thank you for your trick :) 
    But its getting apply to title as well as to Department - as above class is same for both fields , while I require to change the style only for the department.
    Any suggestions ? I have changed the same using Designer which works as per the need , however - I dont want to use SPD Tool !!!
    Bottom line : I Require different font style in Title and Department without use of SPD.
    Any suggestions/idea ?
    Thanks and Regards,
    Dipti Chhatrapati

Maybe you are looking for