How to setup the Airport Extreme for PSP?

Can anyone tell me how to setup the Airport Extreme for PSP? I have been searching the Discussions but none of the posting seems to explain detail enough. A step by step guide would be very appreciated. Thanks.
PowerBook G4   Mac OS X (10.4.3)  

Sorry, I forgot to mention a few points:
1) I don't have the Airport Extreme base station;
2) My PowerBook is connect to the internet thru wired connection with the Built-in Ethernet;
3) The Airport is turned on, but my PSP's scan cannot locate the PowerBook at all (while it find someone else's network)
So, I wonder if I can just connect my PSP to the built-in Airport in the PowerBook directly. So that I can have internet access on my PSP.

Similar Messages

  • How to setup the airport extreme for window xp

    How to setup the airport extreme for window xp

    Sorry, I forgot to mention a few points:
    1) I don't have the Airport Extreme base station;
    2) My PowerBook is connect to the internet thru wired connection with the Built-in Ethernet;
    3) The Airport is turned on, but my PSP's scan cannot locate the PowerBook at all (while it find someone else's network)
    So, I wonder if I can just connect my PSP to the built-in Airport in the PowerBook directly. So that I can have internet access on my PSP.

  • How to configure the airport extreme as wireless bridge?

    how can i configiure the airport to function as a wireless bridge?
    i have connected my airport now with a wire to the modem/router delivered by the local internetprovider (THomson DWG850).
    Since this device has not much reach I want to connect the airport extreme wireless and position in the living room to have better reach?
    or do i need toc hang the settings in the Thomson? does anyone know where to find the admin password of the Thomson?
    thanks in advance
    Eric

    how can i configiure the airport to function as a wireless bridge?
    Sorry, but it is not possible to configure the AirPort Extreme for this type of setup. You will need to connect the AirPort Extreme to the Thomson router using an Ethernet connection.
    does anyone know where to find the admin password of the Thomson?
    Google turned this up in 5 seconds. There may be others if you look.
    Thomson default passwords

  • How to set up Airport Extreme for 11ac and 11n?

    I have just purchased the new Airport Extreme (August 2014) because Apple's website states
    Simultaneous dual-band support.
    AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
    I have number of Macs in my home from a new MacBook Pro with Mavericks to a Macbook Air with Snow Leopard (due to required software) and iPads.
    So after setting up the new Extreme my new MacBook only accesses 11n as does my older Macs. I checked by holding down the option key while clicking the WiFi icon at the top of my Mac. Well, not so automatic then as I was expecting 11ac and 3 times faster access (as stated by Apple).
    I then looked for some documentation for setting up but cannot find anything.
    Hence my question here.
    How to set up Airport Extreme for 11ac and 11n simultaneously?
    At present the new Extreme is no better than my previous 2 year old one.
    Thank you.
    Michael

    How to set up Airport Extreme for 11ac and 11n simultaneously?
    Assuming that it is operating correctly, 802.11ac and 802.11b/g/n are broadcast simultaneously by default.
    Simultaneous dual-band support.
    AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
    That is advertising. The real information is usually found in the small and hard to read footnotes:
    Based on theoretical peak speeds. Actual speeds will be lower.
    AirPort Extreme is based on an IEEE 802.11ac draft specification. Performance based on comparison with Apple’s 802.11n products. Comparison assumes AirPort Extreme network with 802.11ac-enabled computer. Speed and range will be less if an 802.11a/b/g product joins the network. Accessing the wireless network requires a Wi‑Fi-enabled device. Actual speed will vary based on range, connection rate, site conditions, size of network, and other factors. Range will vary with site conditions.
    Since the 802.11ac signal is being broadcast only using the 5 GHz band, some users report that they have had better results by using the option to assign a different name to the 5 GHz band, and then pointing their Mac to that specific signal or network. You may want to try that option.
    But first as a test, please locate the MacBook Pro about 10-15 feet or 3-4 meters from the AirPort Extreme with clear line-of-sight between the two devices. Restart both the AirPort Extreme and the Macbook Pro and then check to see if the Mac is connected to an 802.11ac signal.
    If not, please power off your other wireless devices...computers, mobile devices, etc. temporarily, and try the same test again.
    Please report on your results.

  • Is it worthwhile to buy the airport extreme for non intel

    I currently am using an airport express for my home network and want to use it on my home stereo(upstairs) so we can play music from itunes. So I need to buy another airport for downstairs. Will I get any benefit from the extreme or should I just get another express?

    idadof3, Welcome to the discussion area!
    I think iFelix provided a very good answer in your other thread "Is it worthwhile to buy the airport extreme for non intel".

  • How fast IS the AirPort Extreme?

    I'm in need of a new router/modem to go along with my new ISP and new computer. (the computer is a windows) but i have 3 iMacs and 2 Windows.
    I just have a couple of questions.
    1. How fast Is the AirPort Extreme? Does it boost the speeds of the speeds you already get from the ISP?
    2. Is it a router and modem all in one?
    3. How compatible is it with windows? (can I set it up on a windows computer?)
    4. Is it REALLY worth the cost?
    5. What other router/modem combo can compare to it?

    1. How fast Is the AirPort Extreme?
    The Ethernet ports are 10/100 (100 Mbps max). The wireless interface is 802.11g (54 Mbps max).
    Does it boost the speeds of the speeds you already get from the ISP?
    No, the Internet access speed is limited by the connection speed to your ISP.
    2. Is it a router and modem all in one?
    It IS a router. It has a built-in 56k modem but it does not have a DSL or cable modem built-in.
    3. How compatible is it with windows? (can I set it up on a windows computer?)
    Ethernet and 802.11g are both standards. There is a Windows version of the AirPort Admin Utility which can be used from Windows to configure the AirPort Extreme base station (AEBS).
    5. What other router/modem combo can compare to it?
    Verify few other wireless routers have built-in USB printer support. Of those few devices even fewer are compatible with the Mac.

  • How to rollback the Airport Extreme to previous release?

    Hello,
    I need to know how to rollback the Airport Extreme to previous release.
    I just updated my last generation Airport Extreme to the latest release because it was blinking orange the status light and it requested to be updated.  Howver, doing so, it no longer recognize my AirPort Express nor my second Airport Extreme (2nd generation) that is bridged.
    If anyone knows how to rollback the update I will appreciate it.
    Thanks,
    genbaez.

    I just updated my last generation Airport Extreme to the latest release
    We might be confused by last generation. does that mean Gen5??
    If it is Gen5 you roll back by holding down the options key while selecting version.
    All the previous versions applicable to your model should pop up.
    Just select the one you want.. and it will proceed. You get no warning or other chance to stop it.. so choose well. 7.6.1 is IMHO the best when you are going to mix with older products.
    I got about 10x link speed improvement doing extend wireless when I rolled back to 7.6.1 yesterday.
    Also you should stop the airport utility annoying you.. turn off the firmware update reminders so they only happen once a week. Uncheck all of these. Ignore the update warning when it will inevitably happen.

  • How can setup the outgoing email for ipad2?

    How can setup the outgoing email for ipad2?

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
     Cheers, Tom

  • What is the best way to setup the Airport Extreme?

    I have a wireless network setup in my home using the Airport Extreme. My kids run on PCs and I use a Mac. For the past few years, we have used the wireless network without much difficulty, but we have had some problems with it for the past few weeks. We can all receive excellent signal strength anywhere in the house, but the connection speed is extremely slow are not working at all.
    My setup is as such: cable modem to a Linksys router (so I can hook my printer up and print wirelessly) and the router to the airport's WAN. Also, I have 3 signal repeaters to help boost the signal throughout the house. My kids and I can connect to the internet using ethernet cords, but cannot get online wirelessly even though the signal strength is excellent.
    Does anyone have the same setup and/or problem with their network? If anyone can provide some tips or solutions I'd appreciate it because I'm all out of ideas. Thanks
    Powerbook G4   Mac OS X (10.4.9)  

    Hello aezimmer. Welcome to the Apple Discussions!
    It is very possible that you may have some form of Wi-Fi interference in the immediate area that is preventing you from getting a good clean signal...even if it's a strong one.
    I suggest you perform a simple site survey, using utilities like KisMAC, MacStumbler, iStumbler, or IPNetMonitorX to determine potential areas of interference...and then, try to either eliminate or significantly reduce them.

  • HT2305 How do I download Airport Extreme for a PC?

    How do I download the AIrport Extreme Utility for a PC on Windows 7?

    Click the link below
    AirPort Utility 5.6.1 for Windows

  • How powerful is the Airport Extreme wifi card?

    I was surprised at how many more wireless networks my friend's HP laptop was able to pick up from exactly the same spot in our flat in comparison to my iBook, and that the HP laptop had consistently stronger signals from the networks that I could connect to.
    Is the Airport Extreme fairly underpowered in comparison to other wifi cards?

    I used no tool - the comparison was entirely
    subjective (ie the relative visual 'signal strength'
    scale shown by each system's wireless network tools.
    My friend's HP could consistently see 2, sometimes 3
    more networks than my iBook.
    The HP is also an 802.11g card.
    Good, you're comparing cards that may be compared.
    I am pretty sure the antenna is firmly plugged.
    Good.
    As a general comment - the signal to my wireless
    router is strong and solid - this is not impacting on
    my system use at all, but I was interested to see the
    differences!
    The values displayed by different softwares on different
    systems can't be easily compared. Some use logarithmic
    scales when others use linear ones.
    Many wireless drivers display network names even when
    they receive a usable signal for a few seconds.
    This isn't a proof of performance in real use.
    You may receive a frame out of 5 from an interfering
    network, and your software may decide to display this
    network name.
    I advise you to perform an analysis of your wireless
    neighborhood with a tool like iStumbler.
    iStumbler will clearly show you if you have really
    usable networks, a poor signal level network or
    interfering networks.
    dan    

  • How to setup the dad file for SSO.

    Hi
    We need to setup the dad file for SSO. Can any one help us to setup the dad file.
    Thanks,
    Arvind Goel

    Hi
    It seems that SSO is for AppEx Application Authentication only. You can't specify which Database User your application will connect to the database with if you are authenticating using SSO.
    I came up against this in the following thread.
    Re: How can an AppEX Application work with DB users referenced in DB Trigge
    G.

  • How to setup the cluster environment for BPM using weblogic

    want to setup the cluster environment for BPM using weblogic....
    i have installed the oracle weblogic server 10gr3 and oracle BPM enterprise for weblogic 10gR3
    i have used the Admin tools from the "oracle BPM enterprise for weblogic" to setup the configuration and create the weblogic domain servers.
    i can launch the process administrator and import the project exp file to domain server.
    but what should i do to setup cluster environment using weblogic?
    what i want to do is :
    setup one admin machine..
    setup two product machine..
    enable the cluster so the admin machine can monitor the status of the product machine..
    thanks a lot ...

    The install guide at http://download-llnw.oracle.com/docs/cd/E13154_01/bpm/docs65/config_guide/index.html gives a reasonable amount of info on how to do this.
    Personally I have not used the OBPM option to configure WebLogic instead I've used the information in the above install guide to create the weblogic domain in advance of configuring OBPM.
    Once you've setup WebLogic configure OBPM using the values I mention in the following thread: How to set the JMX Engine parameter in Process Administation?
    Let me know any specific config questions and I'll do my best to answer them for you.
    Thanks,
    Mike

  • How to setup the client application for the RMI?

    Question:
    I write a short program of RMI It contain server and client
    if server and client are run on localhost they are running ok
    but run client application on remote machine it occure issuses.
    How to setup the client on remote machine?

    hello Dhanraj K, for gmail accounts there shouldn't be much manual configuration required. please try to set it up like described in [[Add an email account to the Mail app in Firefox OS]]

  • How to setup the email application for my gmail account in firefox os.. I need the configuration steps for gmail.

    I don't know how to setup the email account sync in firefox os.. can anyone explain the steps to be followed for setting up a gmail account...

    hello Dhanraj K, for gmail accounts there shouldn't be much manual configuration required. please try to set it up like described in [[Add an email account to the Mail app in Firefox OS]]

Maybe you are looking for