How to Share Internet connection using cable with ...

i am using N70, i wonder any way to share my pc broadband connection with my phone using cable. anyone know?

nobody know ?

Similar Messages

  • How to share internet connection from cable modem through built-in airport on imac?

    I have a cable modem with ethernet going into imac. How can I share the internet connection using the iMacs built in airport with other computers that have airport cards?
    I would love to put an ethernet router between the imac and the modem and share the internet connection using the iMacs built in airport with other computers that have airport cards as well.
    Thanks!

    The setup I had working is what I have connected to the internet now. A cable modem with one ethernet jack that plugs into the iMac. The airport from the iMac broadcast to my G5 with an airport card in it and received the internet connection. The PC received it the same way from the iMac but to a Netgear wireless adapter.
    I messed things up recently adding a wired 4 port ethernet router between the iMac and the modem, so that the modem ethernet plugged into the router, and from the router, plugged into the iMac which then could receive the internet but no more airport connections to my other machines. Haven't been able to get it working since.

  • How to share internet connection using 5G wifi/channel 36~48

    I'm using a 15 inch late 2013 MacBook Pro with retina display running 10.10.1 and iPhone 5S A1530 running iOS 8.1.
    I use an Apple thunderbolt to ethernet adapter at work for internet and it's all cool and fine.
    The problem comes when I try to share the internet connection with my phone through wifi. It's alright if I use channel 1 to 11. But when I try the 5G channels: 36, 40, 44, 48, it just doesn't work. The wifi icon in the top right corner of my screen has a wave animation and then nothing. It just goes back to grey instead of an arrow pointing upwards. In the slimmest hope of a display error, I search nearby wifi signal with my phone and nothing.
    I have a 5G router at home and both my laptop and my phone can connect to its 5G signal. So the hardware should be fine.
    It's weird since it should be working as Apple decided to put an option there for user to choose from all the channels, among which lie the four 5G channels.
    So to conclude, my laptop with a functioning 5G wifi module can share internet connection through 2.4G wifi but not 5G.
    Hope someone could help me with it. Thanks.

    I've turned on NAT and attempted to create a new Subnet using DHCP but it doesn't offer me Airport in the network interface menu (only en0 and fw0). Airport is turned on in network system prefs.
    Have you actually configured the AirPort network with its own IP address settings (in a different subnet from the wired ethernet port)?
    Having the interface enabled isn't enough to make it a viable gateway interface. It needs an IP address/subnet mask too.

  • How to share internet connection using socketserver?

    Hello guys is this possible? i want to share my internet connection programmaticaly using java for example i have a one computer that has internet connection and i want to run socketserver from the computer that has internet connection and share the internet connection to another computer that has no internet connection using socket how to do that in java?

    jhovarie wrote:
    Hello guys is this possible? i want to share my internet connection programmaticaly using java for example i have a one computer that has internet connection and i want to run socketserver from the computer that has internet connection and share the internet connection to another computer that has no internet connection using socket how to do that in java?No, this is mostly a admin (networking ) issue. if you want to do so, you require a router (switch), one end should be connected to internet connection, and then connect the rest of the computers to router. you will be able to access the internet.

  • How to share internet connection using 10.6 Server

    Hi
    My server connects to the internet via ethernet and I'd like to setup something like internet sharing so that I have a WiFi connection in the same office as the server.
    I read how to do this using Gateway Setup Assistant but I already have a DHCP setup with lots of static maps and have no wish to overwrite all that.
    I've turned on NAT and attempted to create a new Subnet using DHCP but it doesn't offer me Airport in the network interface menu (only en0 and fw0). Airport is turned on in network system prefs.
    Hope someone can help.
    Cheers
    James

    I've turned on NAT and attempted to create a new Subnet using DHCP but it doesn't offer me Airport in the network interface menu (only en0 and fw0). Airport is turned on in network system prefs.
    Have you actually configured the AirPort network with its own IP address settings (in a different subnet from the wired ethernet port)?
    Having the interface enabled isn't enough to make it a viable gateway interface. It needs an IP address/subnet mask too.

  • How to share internet connection from notebook to mobile phone with micro usb cord in Debian based OS? (reverse tethering)

    I want to share internet connection from notebook to my mobile phone (Keon) with micro usb cord (because I don't have wifi). I found in Firefox OS (version: Boot2Gecko 1.1.1.0-prerelease) Settings only the possibility to share internet from mobile phone to PC. I use a Debian based OS: Knoppix. I tried to accomplish this with Networking Manager and I did a new wired connection via my phone with "Shared to other computers" IPv4 Settings and with FE:...:02 (usb0) MAC address. But on my phone there is not internet although the connecton between my notebook and phone is estableshed.

    Hi Pimpo,
    Thank you for posting your question. I was trying to reproduce your the Shared network, and I would love to know what kind of network you used to connect. This is not possible as of yet and I will file a bug being able to do this, but to make sure I have the right steps on the bug can you confirm the set up of the shared network please?
    Also this is currently not possible because the software does not know how to send network traffic over usb, assuming you do not have the ability to turn the computer into a wifi hot spot, which I would recommend instead...

  • How to share internet connection with KDE networkmanager applet

    I mainly use wireless around my house and like to use one computer to share it's wireless to another when installing Arch, until I can get KDE and networkmanager installed so I can easily connect to the wireless. I've always been able to easily share internet connections with Ubuntu, but when I try it with Arch, with Gnome OR KDE (and their respective applets), It just doesn't work.
    Is there some library or backend I need to install to make ICS work?
    Thanks!
    Last edited by MetaMan (2011-09-10 22:12:26)

    If this helps at all, here is what I am currently trying: I open up the network settings KDE Control Module, select "Wired", select the device (eth0) and click edit, and under the "IPv4 Address" tab  selecting "Shared" from the "Method" drop-down.
    Also, to make it clearer, I am trying to share wlan0(on device 1) through eth0 to eth0 on device 2. Also, device 2 is running the Arch setup and I am telling it to connect to eth0 via DHCP after I select the remote mirror to use. I have managed to do this before when device 1 ran Ubuntu.
    I've searched Google, the forums, read the wiki pages for KDE and networkmanager, and can't seem to find a mention of internet connection sharing (pertaining to my usage case; the forums have some posts of people trying to use their computer to broadcast eth0, I'm trying to do the opposite) anywhere on them. In fact, I'll gladly write the section myself if I figure this problem out.
    Hope this extra information helps!

  • Trying to share internet connection using Airport Express

    I have an internet connection via a Verizon Wireless broadband card in the Express Card slot in my MacBookPro. I share this connection to my iMac via Airport and I have an Airport Express card connected to a printer & stereo. However, when I establish the Airport internet connection (internet sharing in System prefrences) it establishes a wireless network in the MacBook (I think) as evedinced by the Airport signal (fan) logo changing to a vertical arrow. This precludes connecting to the Airport Express (the Airport Express network is not shown in the Airport pull down menu, only the MacBook network). My question is: can I somehow share the internet connection using the Airport Express network???

    ejagnut, Welcome to the discussion area!
    Configure the AirPort Express (AX) to join the wireless network created by your MacBook Pro. The directions can be found in KB 302153, AirPort Express: How to join an existing wireless network in client mode.

  • How to share Internet connection from Leopard to iPhone 3G?

    Hi!
    How do you share Internet connection from Leopard to iPhone 3G?
    So far I've managed to create a network and I joined my iPhone to the network. But when I turn on Internet Sharing from Leopard, iPhone's Safari won't use the connection. It either starts to use EDGE/3G or says that it isn't connected to the Internet...
    What went wrong?

    I have managed to get it work, but only when I completely turn my desktop computer's firewall off. To do this, select the Security icon in System Preferences, then click the Firewall tab. Next, select the 'Allow all incoming connections' option. I wish there was a way to configure individual ports so that I didn't have to leave my firewall wide open, but I haven't figured out how to do that so far.

  • How to share internet connection over wifi to an ethernet decive using airport express?

    Hi i have a device that it can only be connected to the internet via ethernet in a diferent room (and far) where my primary internet connection is. I have my network configured like this: cable modem >>>  connected via ethernet >>> to airport time capsule >>> connectes via wi fi >>> to airport express last generation "n" >>> connected via ethernet cable to device. The problem is that i'm not having internet conection in my ethernet connected device. Anyone know if I have to configure something in some special way or if i'm doing something wrong?
    Thanks
    Guido

    It should work fine..
    To figure this out, check if the Express is connected by wireless properly and getting an IP.. you will see that in airport utility.
    Make sure you are set to either extend or join the wireless network. The Express should then pass an IP to the "device".
    No luck start over.. reset everything to factory.
    If the TC is older model use 7.6.1 firmware.. it works much better for extend wireless.
    Use short names.. 2-20 characters no spaces and pure alphanumeric.
    Then set the Express again in extend wireless mode.
    It is pretty easy in v6 airport utility. Look at the posts from Bob Timmons on how to extend wireless.. he must have answered those question a thousand times in the last few years.
    Here is one I did. https://discussions.apple.com/message/24161378#24161378

  • How to share internet connection with a PC?  Wireless?

    Hi, I've got a mac pro, connecting to the internet with an ethernet cable to the cable modem. How can I add a PC Laptop with a wireless card, to the cable modem. Considering that the MacPro is not Airport friendly. Thanks

    Probably the best bang for buck wireless router is no doubt the Linksys WRT54GL. You can flash it with a 3rd party firmware, like DD-WRT (which is much more stable) and enables you to do all kinds of different things with it like VPN, Wireless Bridge, to name a few.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16833124190
    http://www.dd-wrt.com/wiki/index.php/Main_Page
    Also, Linksys routers IMHO are rock solid even without 3rd party firmware. They work great for both Mac & PC.

  • How to share internet-connection over vpn

    Hallo,
    first, sorry for my bad english...
    i have a mac mini 2011 with os x mavericks and os x server.
    i use a vpn connection for my mobile clients. these clients need to connect to the internet with the same connection as the server.
    how do i share the connection for my vpn clients?
    thx
    cgwaldt

    Mr. cgwaldt:
    I just ran some tests and confirmed the method.  To mask your ip address via your vpn do the following.
    1. Create a vpn connection to your server.
    2. Use Finder to start your ScreenSharing.app.  This app is located at /System/Library/CoreServices/ScreenShare
    3. When you start the app, it will ask you for the ip address of the network computer.  Enter the ip address of your server.
    4. Log in with a registered account on that server.
    5. Do all your work through the shared screen.
    I have taken a screen shot.  You will see two browsers in the screen shot.  One is open on my local computer, and the other is open on the ShareScreen app.  The one in the ShareScreen app shows the static IP address of my office.  The one that is on my local machine shows the dynamic IP address provided by my mobile internet provider.  Note, my advice in a previous post was not entirely correct; I am forcing all traffic through the VPN tunnel in this picture, and I expected my local machine to have the static ip address that is the same as the one in the ShareScreen app.  Even with all network traffic going back to my home server, I run into the problem that you spoke of, but the solution is to use that connection to work from a home computer, and then the problem is solved.
    Any work you do on your server using the ShareScreen app will use internet packets marked with your static IP address.  The connection was not nearly as slow as I had thought it would be. There is a delay between the typing of text and the appearing of the text on the screen, but if you are good at typing, this should not slow you down.
    In this example, the webpage that is showing 173.198.104.130 would be the one that you would use for your billing.  That IP address is the static IP of my office, which is where the "Mavericks1" computer is located.
    For this test, I used a mobile hotspot on an Android Ice Cream Sandwhich operating system running on an HTC Rizound celular phone.  The connection speed is mediocre, and the delay was not bad.  If you are working in a hotel or have access to a much better wireless connection, then the delay will probably be minimal at best.
    I hope this helps.
    -Jared

  • How to share internet access from iPhone with home LAN

    Hello,
    Sorry if this has been asked before, but I just bought an iPhone and am trying to use it to provide internet access to a LAN at my cottage where only dial-up is possible with my ISP. Although this is easily accomplished by enabling internet sharing on my iMac and plugging it into my router's WAN port, I do not have any access to my IP printer or to my SONOS music system. Any pointers?
    Thanks,
    Martin Girard

    Well, getting internet access for my iMac is straightforward using USB tethering (I live in Canada, no AT&T crap). Then, I can share this connection with other computers (via ethernet in my case) by enabling internet sharing (in the Sharing control panel). My problem is that once I plug my iMac in the WAN port of my router, I can't access my LAN anymore. Any ideas???

  • How to share internet connection from macbook pro to ipad via bluetooth connection

    can anyone guide me how to share my internet from my MBP to Ipad (gen-1) via bluetooth connection....???
    i can't share my internet via Wifi...
    because my internet always been cracked by someone if i'm sharing throught wifi...
    pleaseeeeee....
    help me.....

    You just need to enter system preferences, open the tab share, and there you can choose the option "share internet". Then you select the way you want to do it and that's all.
    PS.:I'm Spanish, excuse me for the lenguage or the ortographic faults

  • Share internet connection through iMac with Time Capsule

    I have a scenario at work where I need to temporarily set another router as the DHCP server. I have a customer who has a typical office setup. They have an iMac which is plugged into a time capsule (TC). A network printer is also plugged into the same time capsule. I have had to move the WAN modem to where the wifi router is located in another room. The office needs to be able to connect to the new WIFI network while still having the network printer work. If I setup TC to "join another network" and put into bridge mode, I can no longer communicate with network printer. Can I choose "share internet" in OSX system preferences> Sharing on iMac, connect wirelessly through iMac and have TC function as a simple network switch somehow while being able to communicate with printer.
    Thanks

    jdmein wrote:
    First, before I get into too much detail: Is it even possible to set up a WPA2 network directly from the iMac without a separate router?
    Welcome to Apple's discussion groups.
    Despite the fact that WPA2 encryption has existed for years, Apple hasn't seen fit to include that option in its "Internet sharing" feature.

Maybe you are looking for

  • License recovery

    Greetings, I have bought an family license for iWork at best buy a few years back. I have an old macmini that is going to serve as homework tool for the kids. I wanted to install the iWork there for them, but can't find the original CD. Can't downloa

  • AirPort Extreme no longer works

    Hi Folks, I previously posted that my Extreme had issues finding the PPPoE server after unplugging it (I had to connect it through my Linksys WRT54G.... well, I think the AirPort is now out of commission. This will be my second Airport Extreme in 2 w

  • Keynote Presenter Notes

    How do I printmy Presenter Notes from Key Note?

  • How to set external number for SAP shipment ?

    How to manually assign external number in alphanumeric like AB07089999 for SAP shipment (via VT01N) ? Edited by: MicMic on Sep 19, 2011 6:13 AM

  • HT2513 How do i export iCal to make it import into microsoft outlook

    How do I export iCal and make it import into Microsoft Outlook?