How to show ABAP ALV report in Portal iview?
I have a ABAP report developed in ALV grid. Now I want to show it in EP iview. How can I do that? What type iview I shall use? And any step by step procedure/doc will be really appreciated.
Alternatively is it possible to create a HTML tabular report similar to that of ALV grid and show it in EP.
How complex will it be?
To add to padmakar's remark. You can use a transaction iview but it has limitations.
First of all: You can use a transaction iview with or without Gui. If the user has a sap gui then 1) you make a transaction for your ALV 2) create a transaction iview defining the alv transaction + with gui output
If the user has no gui. Then it will only work if your ALV is made web enabled ( so not on 4.6c ).
Other alternatives are to create a BSP + bsp iview instead of a list. Or use Webdynpro.
Hopes this helpes somewhat,
Frederik
Similar Messages
-
How to do the ALV report output in groups and caluculate the tOTALS(URGENT
Hi
In my ALV report output .I have to group the output based on the DAYS field
0-10 days in one group
10-30 days in one group
above 30 days one group
There is also a field by name "AMOUNT" in my output.
I have to calculate SUBTOTALs at the end of every group and at the end of the report i should caluculate GRAND TOTAL.
Please remember that i should not use any any BLOCKED ALVs and for Totals i should not use the SYMBOLS provided in the application toolbar of the report
Thanks in AdvancePlease don't repost your questions...
Check out my answer in your other post.
How to make the ALV report in groups and caluculate the TOTALS
Regards,
Naimesh Patel -
How to get a Crystal report as an iview in Portal
Hi,
Please let me know how to get a crystal report to Portal.
Regards,
PradeepHi,
I used URL iview option to get the crystal report in portal and am able to view it. Thank you all for your inputs.
But as of now SSO is not configured between BOE and BI system, so when i click on URL iview initially it asks me for credentials to BOE InfoView and after entering that it again asks for BI login as the data has to be picked from BI server.
We are going to configure SSO mean while i just want to know whether it is possible to pass the id and passw as parameters to this url iview, if so what are the parameter id's i need to maintain to pass id and passw.
Let me know on this.
Regards,
Pradeep
Edited by: pradeep balam on Jul 29, 2011 8:34 AM -
How to write ABAP HR reports in ABAP web dynapro
Hi All,
How to write ABAP HR reports in ABAP web dynapro? We can add HR REPORT CATEGORY in ABAP HR using logical database like PNP.How to add HR REPORT CATEGORY in ABAP Webdynapro ?
Thanks.You can't use legacy concepts like logical databases directly in Web Dynpro ABAP. Even if you could do so, you shouldn't. Web Dynpro ABAP should always follow MVC - meaning that your business logic (the model) should be separated from WD as much as possible. This means calling function modules or class methods to consume the business logic and data. So in general there should be no difference between building HR reports or any other type of report in WDA - since from the WDA side you are calling other objects to consume the data.
This probably does mean that you will need to create classes to expose the HR data that you want in your WDA. -
How to send a ALV report as a workitem
Hi All,
How to send a ALV report to the SAP Inbox for approval.
Requirement: When the reviewer executes the report and click on send button.
It will go to the approver for report approval.
How to send a report when reviewer click on the send button.
I am unable to find a solution when the user click on the send button the report will go to the approver.
Please help me out on this...
Regards,
Siraj,
+918008322278.Hi Siraj
I do not have a ready sample with me; however, here can be a logical sequencing of steps which you can follow to achieve this:
1) Define a custom PF STATUS in the ALV with the SEND Button
2) In the User Command routine for ALV, code for SEND
3) See how standard ALV - EXPORT to EXCEL Works - Debug and find the steps to generate an EXCEL - in the SEND Functionality
4) Once Excel is downloaded, create a SOFM document for the same - Check the method CREATE of object SOFM on the coding required to do it
5) Generate the SOFM Object Instance using the document created and calling FM SWO_INVOKE
6) Now you have the run time instance of the report output as a document
7) Define a custom Business object and a custom workflow based on that object
8) Define a custom event with the event parameter of type SOFM
9) From your SEND routine of the report -> trigger the event and pass the SOFM Instance of the excel as event parameter
10) Workflow will have this object via binding from event to workflow container
11) In the decision step to approver, bind this to _ATTACH_OBJECTS
For each of these, you will find some link already on SCN.
Hope this helps.
Once you have the solution, by the above steps or a better one, do remember to create a document on SCN in order to help others - this is a valid requirement and it would be good to have a ready reckoner :-)
regards,
Modak -
How to display the alv report blocks wise with out using the blocked alv
Hi
How to display the alv report with out using the blocked alv function module.
Thanks
Chinnusee this Standard Program
RPR_ABAP_SOURCE_SCAN -
How to obtain the alv reports in the dilog programing.
how to obtain the alv reports in the dialog programming, that is when the push button in the screen in clicked it must be directed to the report, where to write the code for the report.
Hi
Use LEAVE TO LIST PROCESSING and develop your normal ALV dispaly as usual. System automatically takes care of this.
I tried for normal report but try above even in the case of ALV reports
Cheerz
Ram -
How can we edit alv report output.
hi all,
how can we edit alv report output\[removed by moderator as it was just a copy and paste answer of someone else's work without giving a source\]
Edited by: Jan Stallkamp on Aug 25, 2008 4:35 PM -
How to show a crystal report in a SAP Portal?
Hi
I am trying to show a crystal report in SAP Portal. I did a crystal enterprise report iview, and in SAP portal I got this error when I trying to show it:
404 Missing Page
The page you requested is not available on this web server for one of the following reasons:
The address you typed may be inaccurate. For example, a character was missing. To correct this issue, double-check the address and make sure that it is spelled correctly.
If you clicked on a link or button, the web application that generates this link may be experiencing a temporary problem. Close and restart your browser and try the link again at a later time.
Then I test ce_url service, and got this error:
Service cannot be reached
What has happened?
URL http://portalsap:8002/sap/bw/sap-client=100_cmsname=ipmachinebo call was terminated because the corresponding service is not available.
Note
The termination occurred in system BTP with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:mars_BTP_02-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
I reviewed a Ingo's blog, and I have the configuration like he mentioned. With this handler
/CRYSTAL/CL_BW_HTTP_HANDLER
In http tab, I have
Protocol: http
Web server host and port: ipmachinebo:8080
Path: SAP
Viewer application: reportView.do
can someone help me please?
Regards,
PaulinaHi Ingo
Thank you for your response,
I changed the 2 items, but I got this error when I executed the report in portal
HTTP Status 400 - Invalid path /viewreport was requested
type Status report
message Invalid path /viewreport was requested
description The request sent by the client was syntactically incorrect (Invalid path /viewreport was requested).
And when I tested the ce_url service I got this error:
Service cannot be reached
What has happened?
URL http://mars.penitus.com:8002/sap/bw/sap-client=100_cmsname=192.168.0.35 call was terminated because the corresponding service is not available.
Note
The termination occurred in system BTP with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:mars_BTP_02-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
Regards,
Paulina -
How we can sort subtotal results value in abap alv report
Hi, How we can sort subtotal results value in abap alv report
Thanks a lot for your code
but i am still getting double and weird results.
Subtotal IN PARTY KGS TOTAL VALUE
1 40008 3,141.20 192,799.00
1 40008 16,681.06 1,908,659.00
Subtotal 1 19,822.25 2,101,458.00
10 40022 4,590.60 531,228.00
10 40022 3,448.27 377,173.00
Subtotal 10 8,038.87 908,401.00
100 40010 270.172 19,852.00
Subtotal 100 270.172 19,852.00
101 40036 752.898 61,051.00
101 40036 207.586 19,431.00
Subtotal 101 960.484 80,482.00
102 40048 325.936 32,154.00
102 40048 264.32 19,364.00
Subtotal 102 590.256 51,518.00
103 40066 216.134 18,088.00
Subtotal 103 216.134 18,088.00
104 40001 231.96 16,986.00
Subtotal 104 231.96 16,986.00
105 40021 585.918 65,461.00
105 40021 108.683 15,825.00
Subtotal 105 694.601 81,286.00
106 40046 209.777 15,341.00
Subtotal 106 209.777 15,341.00
107 40043 167.353 14,755.00
Subtotal 107 167.353 14,755.00
108 40046 153.023 14,343.00
108 40046 342.348 32,223.00
Subtotal 108 495.371 46,566.00
109 40008 184.085 13,483.00
Subtotal 109 184.085 13,483.00
11 40011 5,275.63 524,232.69
11 40011 6,723.28 643,911.82
Subtotal 11 11,998.90 1,168,144.51
110 40067 142.113 13,333.00
110 40067 492.883 44,428.00
Subtotal 110 634.996 57,761.00
111 40040 118.961 13,190.00
111 40040 492.433 60,029.00
Subtotal 111 611.394 73,219.00
Edited by: Timaji Sawant on Feb 16, 2012 12:16 PM
Edited by: Timaji Sawant on Feb 17, 2012 9:27 AM -
what are the sub gropus in ALV reports and how to display them?
The commonly used ALV functions used for this purpose are;
1. REUSE_ALV_VARIANT_DEFAULT_GET
2. REUSE_ALV_VARIANT_F4
3. REUSE_ALV_VARIANT_EXISTENCE
4. REUSE_ALV_EVENTS_GET
5. REUSE_ALV_COMMENTARY_WRITE
6. REUSE_ALV_FIELDCATALOG_MERGE
7. REUSE_ALV_LIST_DISPLAY
8. REUSE_ALV_GRID_DISPLAY
9. REUSE_ALV_POPUP_TO_SELECT
Also refer this for some explanations
A. REUSE_ALV_LIST_DISPLAY : This is the function module which prints the data.
The important parameters are :
I. Export :
i. I_callback_program : report id
ii. I_callback_pf_status_set : routine where a user can set his own pf status or change the functionality of the existing pf status
iii. I_callback_user_command : routine where the function codes are handled
iv. I_structure name : name of the dictionary table
v. Is_layout : structure to set the layout of the report
vi. It_fieldcat : internal table with the list of all fields and their attributes which are to be printed (this table can be populated automatically by the function module REUSE_ALV_FIELDCATALOG_MERGE
vii. It_events : internal table with a list of all possible events of ALV and their corresponding form names.
II. Tables :
i. t_outtab : internal table with the data to be output
B. REUSE_ALV_FIELDCATALOG_MERGE : This function module is used to populate a fieldcatalog which is essential to display the data in ALV. If the output data is from a single dictionary table and all the columns are selected, then we need not exclusively create the field catalog. Its enough to mention the table name as a parameter(I_structure name) in the REUSE_ALV_LIST_DISPLAY. But in other cases we need to create it.
The Important Parameters are :
I. Export :
i. I_program_name : report id
ii. I_internal_tabname : the internal output table
iii. I_inclname : include or the report name where all the dynamic forms are handled.
II Changing
ct_fieldcat : an internal table with the type SLIS_T_FIELDCAT_ALV which is
declared in the type pool SLIS.
C. REUSE_ALV_EVENTS_GET : Returns table of possible events for a list type
Parameters :
I. Import :
Et_Events : The event table is returned with all possible CALLBACK events
for the specified list type (column 'NAME'). For events to be processed by Callback, their 'FORM' field must be filled. If the field is initialized, the event is ignored. The entry can be read from the event table, the field 'FORM' filled and the entry modified using constants from the type pool SALV.
II. Export :
I_List_type :
0 = simple list REUSE_ALV_LIST_DISPLAY
1 = hierarchcal-sequential list REUSE_ALV_HIERSEQ_LIST_DISPLAY
2 = simple block list REUSE_ALV_BLOCK_LIST_APPEND
3 = hierarchical-sequential block list
REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_COMMENTARY_WRITE : This is used in the Top-of-page event to print the headings and other comments for the list.
Parameters :
I. it_list_commentary : internal table with the headings of the type slis_t_listheader.
This internal table has three fields :
Typ : H header, S selection , A - action
Key : only when typ is S.
Info : the text to be printed
E. REUSE_ALV_GRID_DISPLAY : A new function in 4.6 version, to display the results in grid rather than as a preview.
Parameters : same as reuse_alv_list_display
This is an example for simple list.
2. BLOCK REPORT
This is used to have multiple lists continuously.
The important functions used in this report are:
A. REUSE_ALV_BLOCK_LIST_INIT
B. REUSE_ALV_BLOCK_LIST_APPEND
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_BLOCK_LIST_DISPLAY
A. REUSE_ALV_BLOCK_LIST_INIT
Parameters:
I. I_CALLBACK_PROGRAM
II. I_CALLBACK_PF_STATUS_SET
III. I_CALLBACK_USER_COMMAND
This function module is used to set the default gui status etc.
B. REUSE_ALV_BLOCK_LIST_APPEND
Parameters :
Export :
I. is_layout : layout settings for block
II. it_fieldcat : field catalog
III. i_tabname : internal table name with output data
IV. it_events : internal table with all possible events
Tables :
i. t_outtab : internal table with output data.
This function module adds the data to the block.
Repeat this function for all the different blocks to be displayed one after the other.
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
This function module is used for hierarchical sequential blocks.
D. REUSE_ALV_BLOCK_LIST_DISPLAY
Parameters : All the parameters are optional.
This function module display the list with data appended by the above function.
Here the functions REUSE_ALV_FIELDCATALOG_MERGE, REUSE_ALV_EVENTS_GET, REUSE_ALV_COMMENTARY_WRITE can be used.
3. Hierarchical reports :
Hierarchical sequential list output.
The function module is
A. REUSE_ALV_HIERSEQ_LIST_DISPLAY
Parameters:
I. Export:
i. I_CALLBACK_PROGRAM
ii. I_CALLBACK_PF_STATUS_SET
iii. I_CALLBACK_USER_COMMAND
iv. IS_LAYOUT
v. IT_FIELDCAT
vi. IT_EVENTS
vii. i_tabname_header : Name of the internal table in the program containing the
output data of the highest hierarchy level.
viii. i_tabname_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
ix. is_keyinfo : This structure contains the header and item table field
names which link the two tables (shared key).
II. Tables
i. t_outtab_header : Header table with data to be output
ii. t_outtab_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
slis_t_fieldcat_alv : This internal table contains the field attributes. This internal table can be populated automatically by using REUSE_ALV_FIELDCATALOG_MERGE.
Important Attributes :
A. col_pos : position of the column
B. fieldname : internal fieldname
C. tabname : internal table name
D. ref_fieldname : fieldname (dictionary)
E. ref_tabname : table (dictionary)
F. key(1) : column with key-color
G. icon(1) : icon
H. symbol(1) : symbol
I. checkbox(1) : checkbox
J. just(1) : (R)ight (L)eft (C)ent.
K. do_sum(1) : sum up
L. no_out(1) : (O)blig.(X)no out
M. outputlen : output length
N. seltext_l : long key word
O. seltext_m : middle key word
P. seltext_s : short key word
Q. reptext_ddic : heading (ddic)
R. ddictxt(1) : (S)hort (M)iddle (L)ong
S. datatype : datatype
T. hotspot(1) : hotspot
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
regards,
srinivas
<b>*reward for useful answers*</b> -
Report : How to show all the reports in Content Management
Hi,
Can anyone tell me how I can show the "Resource Locks" Report in Portal.
I can see 4 reports through Content Management -> Reports i.e. Approval Maintenance, Link Consistency, Resource Statistics, Time-based publishing.
If I want to add more reports over here than "How I can achieve it".
Also I have seen the settings System Administration -> System Configuration -> KM -> CM -> Repository Managers -> Reporting Repository
But here I find no combo box for Active Reports, so from where I can activate the reports and show them in Content Management -> Reports
Please help me.
Regards
DeepDeep,
Are you talkign about the report which give you details of which Portal Objects are currently locked?
If yes, then you can go to System Adminitrator > Monitoring > Object Locking
Hope this helps,
*Points will be appreciated. -
How to call an alv report from another program and return back
Hello ,
I am calling one abap program (Prgm B) from another program (Prgrm A).
Here, Prgm B is an ALV report. I have fetch some data from Prgem B that gets stored in an internal table.
Now, I am using below code in Prgrm A,
SUBMIT Prgrm B VIA SELECTION-SCREEN
WITH SELECTION-TABLE rspar
EXPORTING LIST TO MEMORY
AND RETURN.
When Prgrm A executed, it lead me to selection screen of Prgrm B and when I click F8, it shows me the report output, In short, it doesnt return back to Prgrm A. It ends up showing me the alv report if Prgrm B even afetr using RETURN statement.
I want to get back to Prgrm A by fetching some data from Prgrm B.
Please let me know, if i am missing something.
Regards,
SeemaHi Seema,
Refer below code.
DATA: v_matnr LIKE mara-matnr.
DATA: t_listobject TYPE abaplist OCCURS 0 WITH HEADER LINE.
DATA: t_mara TYPE mara OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF t_ascilist OCCURS 0,
line(200).
DATA: END OF t_ascilist.
data var(3) type c.
SELECT-OPTIONS: s_matnr FOR v_matnr.
var = ' 3'.
START-OF-SELECTION.
SUBMIT ztestaks1 WITH s_matnr IN s_matnr EXPORTING LIST TO MEMORY
AND RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = t_listobject
EXCEPTIONS
not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
CALL FUNCTION 'LIST_TO_ASCI'
* EXPORTING
* LIST_INDEX = -1
* WITH_LINE_BREAK = ' '
TABLES
listasci = t_ascilist
listobject = t_listobject
EXCEPTIONS
empty_list = 1
list_index_invalid = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
WRITE:/ 'Below are the lines from the submitted program.'.
LOOP AT t_ascilist.
WRITE:/ t_ascilist-line.
ENDLOOP.
SKIP 2.
ENDIF.
ENDIF.
IMPORT t_mara FROM MEMORY ID 'T_MARA'.
WRITE:/
'Here is the output from the table exported from the submitted program.'
LOOP AT t_mara.
WRITE:/ t_mara-matnr.
ENDLOOP.
Submitted program
REPORT ZTESTAKS1.
DATA: v_matnr LIKE mara-matnr,
v_maktx LIKE makt-maktx.
DATA: t_mara TYPE mara OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF t_makt OCCURS 0,
matnr LIKE makt-matnr.
DATA: END OF t_makt.
SELECT-OPTIONS: s_matnr FOR v_matnr,
s_maktx FOR v_maktx.
START-OF-SELECTION.
SELECT matnr INTO TABLE t_makt
FROM makt
WHERE matnr IN s_matnr
AND maktx IN s_maktx.
if not t_makt[] is initial.
SELECT * FROM mara
INTO TABLE t_mara FOR ALL ENTRIES IN t_makt
WHERE matnr = t_makt-matnr.
endif.
EXPORT t_mara TO MEMORY ID 'T_MARA'.
WRITE:/ 'This list is from the submitted program'.
SKIP 1.
LOOP AT t_mara.
WRITE:/ t_mara-mtart.
ENDLOOP.
Hopes this helps you.
Thanks,
Ashok. -
How to show a WAD template in Portal
Hi ALL
How can i show a WAD report (WAD template) in Portal. what are the steps need to followed.
Like for Bex Application Iview we create it by using a Query String(combination of infocube name and Query name), like wise what should be done from Portal end to get a WAD template in to portal as Iview.
Regards
Vijay kumarHi,
Regarding your issue your template is not active.
In the first place you need to check if the template is activated in the backend BW system.
After activated and launch it from the backend system. Once the BW template is
active, kindly launch the template from the backend system, please try
to launch the template in browser version as we can determine the URL
being launched. If you're able to succesfully launch the template from
the backend and still you're encountering an error while testing it from
the iview. Then it should be a problem with the system object configured
for the iview. There is a need to check if the system alias SAP_BW is
properly configured to the destination BI content system.
Please refer the note:
1048857 - Activating the default Web templates
In RS_TEMPLATE_MAINTAIN_70 you can choose the version of the
template to be displayed ("A" per default).
Please compare and attach the A- and D-version of 0ANALYSIS_PATTERN.
If the activation from business content was successful, the versions
are equal. I assume, that they are not equal.
If they are different it means that the activation was not successful.
Another indicator would be, that the activation only takes one or two
seconds. Normally it takes several seconds (up to a few minutes).
As mentioned in note 1048857 it might happen that the checkboxes, to
mark the objects for activation, are not checked and therefore nothing
is activated. For this case note 1070452 is mentioned, which is
available in english since today: If the checkboxes are not checked
and you are unable to do that manually, please use the context menu
on the object on top to select all objects below. The activate the
objects again ( > how long does it take, A- and D- version are the
same afterwards ?)
It should resolved your issue.
Thanks,
Venkat -
How to send the ALV report output in mail
Dear all,
I have developed an ALV report.I need to send this output in the mail.Can anyone help me with the sample code of how to do this.Hi Ramya,
Check the links below :
http://wiki.sdn.sap.com/wiki/display/Snippets/Sending+Mail
http://wiki.sdn.sap.com/wiki/display/Snippets/AbapEMAILProgram
http://wiki.sdn.sap.com/wiki/display/ABAP/SendMessagetoExternalemailidandSAPUseridvia+ABAP
They will explain you to send an email.
Regards,
Kittu
Maybe you are looking for
-
Changing window to floating = true
Where in a program, such as Apple Mail, do you find the setting that governs the floating properties of the windows? I know from the dictionary that it is boolean in nature. I have searched for hours, both on the web and in the computer for it. I pie
-
Report to show customer without sales rep
Dear Experts. Is there anyway or any report to show customer that don't have sales rep tag to it in Partner Function?
-
Hi Expert, The scenario is, in the begining of the month production personnel takes the material from central store to shopfloor storage location & consume in different different process orders. If required he repeat the same activity during the mont
-
Practical use of UML diagramming tool....
Hi , the use of UML diagramming tool is to present the system to end user (use cases) ... like the Entity Relationship Diagram in the Oracle Designer.... However , i 'd like to ask if the product of this tool can be used as a base to produce somethin
-
How does Dynamic Proxy work?
I don't know how Dynamic Proxy works, can anyone give me a simple example? thanks in advance!