How to show header value in each page same as Page field value.

Hi there
It would be very helpful if anyone could tell us how to set header value based on the page field.
To make it more clear.. i have a field in my Rtf (which is basically a group by) so in each page it'll differ.. My Header should reflect the same as field value.
what my understanding is header wont change for each page. but ,my requirement is something like i have to show the header which is same as one of my filed value..
for eg:
HEADER: ABC page-1
Field - ABC
HEADER:XYZ page-2
Field - XYZ
Regards - Vijay
Edited by: Vijay Santhanam on 23-Oct-2008 3:51 PM

Hi Haiye ,
The Pointer you gave would keep Header ABC through out all the pages in report right, actually i had tried this and got same header for all pages,
but what i need is my first page Header should be based on one of the field of Page 1, second pge Header again based on the same field, but the value may differ... (coz the page field is group by ).
Would appreciate your help on this issue!!
Regards - Vijay

Similar Messages

  • How to Show total value in the header 2nd page but based on 1st page footer

    How to show total value in header in report builder but i have the total have related with the total in footer.
    Example
    ===============================================
    Page 1
    Empno Ename Sal
    1 Scott 1000
    2 ALlen 2000
    3 Susi 1000
    Total Sal Page 1: 4000
    ===============================================
    Page 2
    Total Sal Page 1: 4000 --> How to get it?????
    Empno Ename Sal
    4 Budi 1000
    5 Roger 200
    6 George 2000
    Total Sal Page 2: 3200
    Please Help..
    Thanks

    hmm .. what i would do is
    - create a placeholder column
    - create a field in the header and one in the footer
    - have the footer field reference the summary column
    - have the header field reference the placeholder column
    - create a fromat trigger on the footer field to
    store the value of the footer into the placeholder column
    so when the report is executed and the footer field is formatted, the format trigger stores the current value of the summary in the placeholder. then the pagebreak occures and the header field is formatted .. printing the value.
    there might actually be an easier way, just reference the two fields to the same summary column and in theory, since there is nothing happening between the time when the footer is formatted and the header is formatted, the values should be the same .. however this is a theory and i have not actually tested this. since reports does all kinds of fancy optimization this might have unexpected results, but it's worth a try.
    thanks,
    ph.

  • How to show "ALL" Values by default in Page Drop-Down Lists in Pivot Tables

    Hi Everyone,
    Iam stuck with 1 problem please can any 1 help me if u know the solution.
    Here is my problem:
    How to show "ALL" Values by default in Page Drop-Down Lists in Oracle BI Pivot Tables?
    For example, if you place Region in the pages area, a Region drop-down list allows the user to select a particular region, and see the data for only that region, rather than seeing all the Regions,But by default its not showing "ALL" option in the drop down list ,rather than doing that its showing result for only 1 region by default.
    And an other problem with this pages area is, if we palce the multiple attributes in the Pages area in the pivot table, the (Fields)result is showing in vertically, the attributes 1 by 1(Every attribute in a new line) ,rather than showing like that, is there any way to show the results in horizantally?(We want to have it as a seperate drop drown list for every field horizantally not as a concatenated list).

    Thanks Nikhil. But I am fetching the values from the LOVCache.java.
    I am using <af:selectManyChoice>. Is there any way I can use LOVCache.java value for selecting default values instead of hard coding?
    I mean to say can I write
    unselectedLabel="#{LOVCache.entityTypeSelectionList.anyValue}"
    where LOVCache.entityTypeSelectionList is used to populate the drop down box.
    Regards,
    Aseet

  • How to print multiple footers for each page in RTF template xml report.

    Hi,
    How to print multiple footers for each page in RTF template xml report.
    i am able to print ( two sets ) ...
    up to last page ( one template ) and for last page ( another template).
    i want to change the footer information based on the group value printed in the report ( it might be 5 to 6) In every report run.. can you please check and let me know do we have any feasibility to achieve this.
    Thanks in advance.
    Regards,
    KAP.

    You can remove all other logic, like last page only contents (start@last-page:body), etc and section breaks if any you have inserted manually.
    Just have for-each@section logic.
    It would be difficult for me to guess what you have done without looking at your RTF or describing here.

  • Header displaying in each page

    Hi,
    I need  header details to be displayed in each page. These header details with line items are  placed in a table  in  main window. So when line items exceed to second page and so on  then i have to display header details in each page.
    Thanks in advance.
    Regards,
    Neelima.

    Hi Chetan Gala  ,
    Thanx for that its working but now format problem after  that
    I have  to display header details in Bold . I have made a paragraph format as BOLD  but now header line in first page displaying normally and in page 2 bold. How can display In all pages as Bold for header details
    Thank in Advance
    Regards,
    Neelima

  • How to show 1 value in chart

    Hi there! just want to ask how to show the value 1 in chart?
    Thank you in advance!
    Best Regards,
    Jef

    Hi jefnavarro,
    According to your description, you hope the value 1 to be displayed in series. If so, please refer to the following steps to set minimum value of Horizontal Axis to zero:
    Right click anywhere of Horizontal Axis on the chart and open Horizontal Axis Properties dialog box.
    In Axis Options pane, in Axis range and interval section, click the expression (fx) button next to Minimum.
    In the expression text box, type =0, then click OK.
    The following screenshots are for your reference:
    If you have any questions, please feel free to let me know.
    Best Regards,
    Wendy Fu
    Hi there and good day to you! 
    First of all thank you for the clear steps that you share but I don't know why still won't come..
    maybe because my horizontal axis is starting from 1 as you can see on the lower part of my screenshot.. how can i set this to 0?
    thank you again.
    edited:
    just want to add that my data is only counting on data in Values [Count(Name)] in chart data maybe that's why i don't have 0 value?

  • Photoshop Elements 8, How to show  hue, value and saturation of a specific area of a pickture?

    Hello,
    Photoshop Elements 8, How to show  hue, value and saturation of a specific area of a picture?
    How should I select the area? Which tool?
    Thank you in advance, Karl

    First make sure your Info Palette is visible : menu Window / Info (shortcut F8)
    In this palette, click the small     icon 'more'
    Choose 'Palette Options'
    and choose HSB for the second palette readout.

  • How many shows can I DVR at the same time?

    I just signed up for FiOS triple play with preferred HD, premium stations, 75/75 internet and phone. I was watching a show the other night and DVR'd 2 shows - got a message saying I couldn't do that. How many shows can I DVR at the same time? Can I still watch a live show while DVR's recording?
    This is SO frustrating!

    Every regular DVR has 2 tuners It can recordp to 2 shows at a time.
    If both tuners are in use,, then you can't watch anything else.
    Want to record more, get more DVRs or upgrade to Quantum.
    Lowere level has 6 tuners. THey support remote TVs and recording.
    THere agin, you can get combination of channels being watched and recorded up to 6.
    Need even more, upgrade to higher level and have 12 tuners to share.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • How to show excessive values in next page in SAP SCRIPT

    Hello,
    Please any one can help to show excessive values in next page .
    For example i want to show
    567
    5678
    789
    23456
    I want to show values 23456 in next page only.
    Can anyone please suggest me how to do so?
    Thanks and regards
    Mave

    Hi Swetlin,
    I have this format in the main window.
    textaaaaaaaaaaaaaaaaa
    textfffffffffffffff
    123
    1234
    1234
    5667
    1234
    textweeeeeeeeeeeeeeeeeeeeee
    texttryrtyrtuyrturtur
    now when i am doing as you suggested
    the last texts are coming in the next page.
    What i want is to show overflow of numeric data in next page and the remaining last text should remain as it is in the first page only.
    i mean
    textaaaaaaaaaaaaaaaaa
    textfffffffffffffff
    123
    1234
    1234
    5667
    1234
    textweeeeeeeeeeeeeeeeeeeeee
    texttryrtyrtuyrturtur
    and in the next page
    4567
    4568
    8790
    Thanks and regards
    Mave

  • SMP 3.0: how to handle header values in the SOAP WS using Integration Gateway

    Hi Experts,
    We have a requirement from our current customer where they are providing us a SOAP WS.For one of the method we are passing “username” & “password” as input parameters and getting one security key (some unique number) in the response. We are able to do OData modeling for the same method. So far, it is fine.
    For other method, we have to pass that ”security key” in header along with some other parameters in the body section. While doing the request mapping for this method, we don’t see any option for this key parameter apart from those parameters (in that body section).
    We found one publicly available WSDL to reproduce the same scenario:
    e.g http://api.geosvc.com/services/soap?wsdl . To access its one of the method/operation GetPlace,We have to pass APiKey and Cursor value in the header section.
    <wsdl:message name="GetPlaceRq_Headers">
    <wsdl:part name="ApiKey" element="tns:ApiKey"/>
    <wsdl:part name="Cursor" element="tns:Cursor"/>
    To get APiKey, we have to register first. http://www.geosvc.com/register , once its done, you will get one APiKey as below:
    The same API key has to pass to access “GetPlace” method. So we tried it in SOAP UI to understand how exactly it should work:
    As you can see below, for the method “GetPlace”, we are passing values as in:
    Header Value
    Cursor
    blank
    ApiKey
    df7f8cc90e3345b4980cf6631f33a32d
    Body
    Country
    US
    Place
    HOLLYWOOD,CA
    Also got the response.
    When we do modeling (more precisely request mapping as below) for the same method we don’t see any Header related parameters. We can see only parameters which are available in the BODY section.
    We thought if we can get APIKey parameter in the body sections only, then it would be easy to map with. Right?
    What do you suggest how we should handle this kind of scenarios?
    CC: Mustafa Saglam, Jeff Gebo, Bjoern Woppmann
    Regards,
    JK

    Unfortunately the public example is a slightly different use case.  You have to register to get a static API key that is used in all calls.  That is something you would hard code into the headers.
    I think you are asking about a dynamic key they changes on each login.  It would be great if we had a public one that upon login returned a unique session key to be used in subsequent calls so we could better test and model accordingly.
    If you were using Agentry the answer would be yes you can do this.
    --Bill

  • How to show static values in h:selectOneListbox

    Hi
    i would like to show static values in <h:selectOneListbox>
    how do i that ??
    <managed-bean>
    <managed-bean-name>Options</managed-bean-name>
    <managed-bean-class>java.util.ArrayList</managed-bean-class>
    <managed-bean-scope>request</managed-bean-scope>
    <list-entries>
    <value>val1</value>
    <value>val2</value>
    <value>val3</value>
    </list-entries>
    </managed-bean>
    or some how i define a <managed-property> ??
    <managed-property>
    <property-name>options</property-name>
    <property-class>java.util.ArrayList</property-class>
    <list-entries>
    <value>val1</value>
    <value>val2</value>
    <value>val3</value>
    </list-entries>
    </managed-property>

    Hi Swetlin,
    I have this format in the main window.
    textaaaaaaaaaaaaaaaaa
    textfffffffffffffff
    123
    1234
    1234
    5667
    1234
    textweeeeeeeeeeeeeeeeeeeeee
    texttryrtyrtuyrturtur
    now when i am doing as you suggested
    the last texts are coming in the next page.
    What i want is to show overflow of numeric data in next page and the remaining last text should remain as it is in the first page only.
    i mean
    textaaaaaaaaaaaaaaaaa
    textfffffffffffffff
    123
    1234
    1234
    5667
    1234
    textweeeeeeeeeeeeeeeeeeeeee
    texttryrtyrtuyrturtur
    and in the next page
    4567
    4568
    8790
    Thanks and regards
    Mave

  • Stopping a header reloading with each page

    I've had loads of conflicting advice on this one. Someone
    must know surely. How do I stop a flash movie from reloading each
    time a link button is clicked. In other words I just want the movie
    to load once on the home page and the integrated buttons to work as
    links to other html pages without the movie reloading on each
    page.

    well, lets start with the top one, since its an interesting
    way to do things anyway.
    when you look at your html file, (or asp or php) you'll be
    able to see the .swf file embedded in there. If you attach
    variables to the back of that using a script...
    "yourflashfile.swf?VARIABLEA=yesssss"
    that will pass a variable to your _root timeline called
    VARIABLEA with the value of "yesssss". You can use that directly in
    your html, but if you want the variable to change, you'll have to
    use a script. I like to use php because its free and open source,
    and very easy to find online help.
    http://www.13studios.com/whatever.php?VARIABLEA=no
    ------ doesn't work, dont click.
    Would pass your php file VARIABLEA with a value of no. So you
    see we can now connect the two by using a php echo command...
    <?php echo "$VARIABLEA" ?> or <?=$foo?>
    can you put that jumbled mess of answer together
    successfully? :D Lemme know!

  • How to place an image onto each page

    Hi !
    How do I place an image onto each page (like a logo in a sidebar) using Pages 5.5 ?
    Thanks,
    Karsten

    Karsten,
    I am surprised no one has answered you yet - there are so many Pages users here.
    I am not a Pages user but I did find one way here on this thread in an answer from Arno Jannarelly
    insert image to header in Pages, template header
    "If you want any layout item to be repeated to all of the pages of your document, you just have to select the item(s), then go to Arrange/Section Masters/Move Object to Section Master.
    The good thing of this is that you can repeat any item or group of items placed anywhere you want on the page."
    Now when I first tried it I had no luck, until I selected the image and went to Arrange > Section Masters from the main menu, not on the right hand side from the Format/Document area.  
    From there there is an option: Move Object to Section Master.
    You then can format your image with drop shadows, opacity, etc. and it should be there on new pages in Pages. 

  • How I show only 20 rows per pages in a rtf report in BI Publisher 11g

    I'm making a report and i want show only 20 rows per pages in a formatt RTF. I get this with anything as a xls, xslt....
    I'm a new user....please . Any idea..???
    Thank for all.
    Edited by: 844565 on Mar 15, 2011 7:34 AM

    Instead of doing that take the url CURRENT_SERVER_URL(pre-definde BI Publsiher variable) by declaring like below
    <?param@begin:CURRENT_SERVER_URL?>
    Then subsequently add the extra patameters eg. region like below
    {$CURRENT_SERVER_URL}Data/Country.xdo&p_region={REGION} <- get this REGION value from XML
    Cheers,
    ND
    Use the "helpful" or "correct" buttons to award points to replies.

  • How to show exponent value in adf output Text

    Hi,
    How to show values in the table column output text with exponent values like 3 ^rd^ , 2 ^2^ , Hello ^R^,etc.. ?
    Do we have any RichFormatText for the ADF output Text?
    Thanks..

    yes...got it myself...thanks..

Maybe you are looking for

  • Black and White with Actionscript

    In the website I'm developing I want to turn the background image to black and white as the cursor moves toward the left side of the screen or color when the user's cursor moves toward the right side of the screen. Right now I have two images, color

  • Sales orders - how make a link with purchase requisition ?

    Hello, I'm creating a sales order by bapi BAPI_SALESORDER_CREATEFROMDATA. At the creation, ( or after if at the creation is not possible), I have to create this link: sales order item --> schedule lines --> purchase requisition and entry the sold-to

  • Unvalid digital signature

    when i try to install itunes on my computer after downloading from the website i keep getting the error message: this file was blocked because it does not have a valid digital signature that verifies it's publisher what should i do ?

  • Rec Specs for External HD and AirPort Extreme

    I've been using my AirPort Extreme for a few months now and am very happy with the product.  I've encounterd one problem, though.  I have an external harddrive attached to the AirPort Extreme to wirelessly share my various media libraries (iTunes, iP

  • Where are link icon pictures located? I'd like to back them up.

    I bookmarked a lot of sites in my favorites folder. Each of the links in there has a little picture given to it by that website. Whenever I uninstall Firefox and then later install a new version, all those bookmarked links lose the icons. The only wa