How to show my customer-subscreen for CV01N tcode?
Hi.
There is a line:
CALL CUSTOMER-SUBSCREEN scrcust INCLUDING 'SAPLXCV110' '0100'.
at '0200' screen's PBO.
I create a project in CMOD for CV110001enhansment. Then I create a screen '0100' in XCV110 func. group and write some stuff there. Then I activate my project in CMOD but nothing happen with the main screen...
What should I do to activate my customer-subscreen correctly?
Thanks. Bye.
Hi,
Have you added the enhancement for the Tcode in you project created. and this enhancements should be the screen exit and fm exit for the new screen provided by SAP itself.
Hope this might help you.
Pooja
Similar Messages
-
How to create a custom measure for each level of a dimension
Hi all!
Can Anyone please explain me with an example, how to create a custom measure for each level for a dimension? I dont mine if you use
one or more measures.
thanks in advance
hope someone helps me.For example:I create a dimension for product_dim witch has 4 levels:total, class, family and item:
d_aben18
n1_aben18
n2_aben18
n3_aben18
n4_aben18
herarchy:h_aben18
cube:cubo_aben18
measure:med_aben18
I create this code to fetch the data to the dimension:
TRAP ON CLEANUP
SQL DECLARE c1 CURSOR FOR SELECT-
total_product_id,1,'N1_ABEN18',total_product_dsc,-
class_id,1,'N2_ABEN18',total_product_id,class_dsc,-
family_id,1,'N3_ABEN18', class_id, family_dsc,-
item_id,1,'N4_ABEN18',family_id,item_dsc-
FROM PRODUCT_DIM
"OPEN THE CURSOR
SQL OPEN c1
"FETCH THE DATA
SQL FETCH c1 LOOP INTO-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N1_aben18_LEVELDEF,:D_ABEN18_long_description,-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N2_aben18_LEVELDEF,:D_ABEN18_parentrel,-
:D_ABEN18_long_description,-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N3_aben18_LEVELDEF,:D_ABEN18_parentrel,-
:D_ABEN18_long_description,-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N4_aben18_LEVELDEF,:D_ABEN18_parentrel,-
:D_ABEN18_long_description,-
"SAVE THE CHANGES
UPDATE
COMMIT
CLEANUP:
SQL CLOSE c1
SHOW 'KK2'
Then I create a cube with use compression off, and in rules sum for example.
After, I create a measure and I select Override the aggregation specification for the cube, in rules I put nonadditive and I would like to create aprogram to assign distinct values to each level of the dimension. For example, I put 1, 2 3, and 4 values, but at the end I would like to put count(distinct(values)).
for that I create another program:
VRB D_RETURN DECIMAL
if D_ABEN18_N1_ABEN18_LEVELDEF eq 'N1_ABEN18'
then D_RETURN = 1
if D_ABEN18_N2_ABEN18_LEVELDEF eq 'N2_ABEN18'
then D_RETURN = 2
if D_ABEN18_N3_ABEN18_LEVELDEF eq 'N3_ABEN18'
then D_RETURN = 3
if D_ABEN18_N4_ABEN18_LEVELDEF eq 'N4_ABEN18'
then D_RETURN = 4
else d_return=26
return d_return
"SHOW D_RETURN
cubo_aben18_med_aben18_stored=d_return
but it doesnt work.I dont know how to put to assign or to see what I want.
I report the measure, or I report the program, but then how can I see the values of the measure?
thanks in advance -
How to create a "Custom Color" for highlighting? (Acrobat XI)
March 10, 2014
How to create a "Custom Color" for highlighting? (Acrobat XI)
The numbers in the RGB and other fields change as various numbers are changed.
I wanted to create a pale orange:
Hue 13 Red 255
Saturation 240 Green 177
Luminosity 86 Blue 140
I'd selected one of the orange squares in the color grid, to display the general orange area of the slider.
I moved the slider to select a pale orange, which generated the above numbers. Since this wasn't directly available to save to a Custom Color, I tried to edit the numbers. Unfortunately, the other numbers changed, making it impossible to actually create a color.
Any suggestions would be appreciated.
Note: I used Techsmith's Snagit to show screen shots in a Word document.
When I attempted to browse and upload the file, the error message said "[The content type of this image is not allowed.]"
OK...what images *are* allowed?Hi Don,
I saw Gilad answered your question in another forum post.
Do you have everything you need at this point?
Let me know if you need further assistance.
Kind regards, Stacy -
How to find the customer exits for a particular transaction
hi
how to find the customer exits for a particular transactionHi jyothsna vankadari ,
ther is a convenient way to find all BADIS called. You may know that BADIS are the newer version of EXITs.
I would suggest you to go for BADI.
Follow the below steps to find out what all BADI's are called when you press any button in any transaction.
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
Now
4) Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any transaction.
Regards,
Clemens -
How can I find a bapi for perticular tcode?
hi,
How can I find a bapi for perticular tcode?
Thank you
ASHOK KUMARHI Ashok
If you mean that you need to know what BAPI's a particular tranx uses, which I can only assume that's what you mean, then you should access the code behind the transaction and search for 'CALL'. That normally is the standard method that think that most people use.
Suppose you want to find the bapi for creating a sales order, you usually use transaction VA01 for this.
<b>1. Find out the package of the transaction.</b>
Start Va01 go to system --> status.
Double click on transaction
Package is VA
Open this package in SE80
Open business engineering-->Business object types
Find the BO which sounds the most appropriate
I would suggest BUS2032 Sales Order
Double click.
Open methods.
Find the released method with from data or something similar in the name
, Createfromdat2
Position the cursor in it and click the program button
Scroll down to find the bapi used in this method
With this way you can also find out programs and FM's
<b>2. Start va01 go to system-->status </b>
Double click transaction VA01
Double click on package
Read the application component. (this is SD-SLS Sales)
Then open the transaction BAPI
Sales and distribution>Sales>sales order
createfromdat2
Regards
Preeti
<b>
Please reward for useful reply</b> -
How to make a custom TableModel for ResultSet
Hi,
I am doing my University Team Project using Java and MySQL what would be the best way to implement a custom TableModel for a JTable that shows the data from the MySQL database.
I've googled it for a couple of hours but all I can really find is examples of how to add static data into the jTable.
The updating of the database through Java works fine, but I would like to show the results in a JTable.
I need help on how to implement a TableModel that uses a ResultSet to populate a JTable.
Any examples of how to make a custom TableModel or links to something that shos me how to do it would be great.
Thanks
Shazan MiahI've googled it for a couple of hours but all I can really find is examples of how to add static data into the jTable.Then you need more googling practice on picking the appropriate keywords to narrow down a search. Words like "jtable resultset" yielded many hits. Of course I'm partial to the one I suggested that was found in the Swing forum.
-
How to show a custom error message in Workflows
Hi
I am working on an already developed Z copy of BO FIPP.
The requirement is to make a customer specific validation on Profit centers which should be checked just before posting the document.
I am aware of the POST method in FIPP that uses Function Module - PRELIMINARY_POSTING_POST_ALL to make sure that everything is fine and captures the errors as well if any. - But it captures only standard SAP errors.
How can I use this FM to capture my custom errors as well.
Or is there any way to achieve this.
Kindly advise.
Thanks,
Arash.Hi Nabheet,
Thanks for your response.
The FM returns the error messages if they are standard ones. For example, if the posting period is closed - the FM will not allow the Workflow to proceed further.
But in this case, I have a custom error - for a particular Profit center, Cost center and I/O fields are mandatory(not at time of parking, but should be filled before posting).
Since this is not a standard error, this FM will not stop workflow from proceeding further. How can I have the custom error captured in this FM?
Thanks. -
How to create an custom template for cheque printing layout?
Hi, I have a question about cheque printing format set up in SAP Business One.
All the the system standard templates in u201CCheque print lay out designeru201Dare u201Ccheque-stub-stubu201D or u201Cstub-cheque-stubu201D or u201Cstub-stub-chequeu201D (three portions). What I need is u201Ccheque-stubu201D (two portions)only. Anyone knows how to create an custom template?
Thanks.
Edited by: Angela Zhang on Jan 17, 2010 7:18 AM
Edited by: Angela Zhang on Jan 17, 2010 7:18 AMHi Angela,
Check the thread,
Re: Preprint AP check - stub/check repetitive area fram size
CHECK PRINTING
Re: check/cheque for payment printing posting date on stub
PLD Check-Stub-Stub
PLD Check
PLD Multiple Check printing
Regards,
Madhan. -
How to load a custom waveform for use with DAQ voltage generation
I would appreciate some advice on how to take a custom waveform (just a modified triangle wave with pauses at the tops and bottoms) and use that to control the voltage output from a DAQ.
Some background: My intent is to use the waveform to control mirror scanning for a LADAR imaging application . Because our DAQ (NI-6251) only has one clock, it cannot update the X and Y channel voltages independently. I'm using a triangle wave to control both axes, which works fine for the X direction. However, to prevent the Y axis from incrementally steping up after every X pixel, I'd like to construct a waveform, similar to a step pyramid, so that the Y axis remains constant over the X sweep and only updates to the next row after all X pixels are collected.
I assume I can make the desired plot in excel, and then read it in somehow - but this is where I start to get fuzzy. Can any one point me to an example or tutorial on this?
Some other questions:
1. Do I needto worry about scaling? will my custom plot need to contain a specific number of points (perhaps the exact number of pixels in the image)?
2. If I change the image dimensions, will I need to revise the control waveform in the Y axis?
Thanks in advance,
jimmyThis thread didn't appear to go anywhere. I am trying to do something similar and was looking for help. I want to create a repeating output voltage wave based off the excel file attached(with times). Is there a way to have my program match the output voltage and time with the table attached on a repeat and send that signal to the output?
Thanks,
T
Attachments:
Sig Gen.xlsx 34 KB -
How to Register a Custom Template for Accounts Payable
How do I register a Custom Template for Accounts Payable?
Found this thread on the forum: Registering Template in Oracle Applications
Take a look to see if the thread helps.. -
How to create a customer program for "PPMOD"feature(pe03)?
Hi,
I want to create customer program for "PPMOD"feature(tcode:pe03),who can tell me the steps? (ECC6.0)
thanks a lot?
Olivia YangHi,
/1PAPA/FEAT610PPMOD the generated program for the feature.
You are forbidden to change this generated program. Ideally whatever logic regarding the feature needs to be put through pe03 tcode of feature and not in the program.
Still if there are any changes that need to be done to the program you can enhance the program.
To enhance the program you need to go to se 38 and open this program and press Shift + F4
Then Goto->Enhancement operations->Show implicit enhancement operations
Then go to yellow line right click on mouse and Enhancement implementation->Create
And put your own code in the implementation.
Regards,
Divya -
How to Write a CUstomer Exit for a variable in BEx
Hi,
How to write a customer exit variable in bex Query designer
Do i need developers key for this (If so what type of key do i need so that i can ask basis tean to generate)
Info Object: ZEXP_DTE (Expiry Date)
Variable on ZEXP_DTE :
ZEDTE
Type: Customer Exit
Can any one please tell me how to write a code in CMOD from this (Step-by Step)
Expiry Date > Current Cal Day
As arun said
'l_s_range-low = SY-DATUM.
l_s_range-opt = 'I'.
l_s_range-sign = 'GT'.
APPEND l_s_range TO e_t_range.'
I want to insert the above code for the above customer exit but as i am new to BW as ABAP please explain me what are the steps involved in CMOD
ThanksHi,
To write customer exit for a variable, you require Access key.
Contact your BASIS to get that.
Access Key,BASIS?
To write Customer exit,
User Exits
User Exit for Variable
/thread/809285 [original link is broken]
Hope these helps u...
Regards,
KK. -
How to show the message text for constraint violations
Hi all,
In a batch procedure a primary key is violated (ORA-00001). For the primary key, a message is recorded in the TAPI and the message table.
How to show the enduser a proper message text instead of the ORA-00001.
We are using Designer 6 with Headstart 2.1.2.
Thanks in advance,
JoepJoep,
If you try to insert the record by calling the ins procedure of the Table API, you will see that it will result in an ORA-20998 message, which means that the error message details reside in the CG$ERRORS plsql message table. These messages can be extracted e.g. with the messages.sql script, shipped with headstart.
If you do not want to rewrite your direct DML (insert into [table name] ...) in the complexer calls to the TAPI services, you might want to user VAPI's for it. In fact, this is one of the major advantages of using VAPI's.
The CDM guidelines volume, chapter 6 states that:
<I>The front end no longer needs to trap declarative constraint
errors (Primary Key, Unique Key, Not Null and Check
Constraint violations) and replace them with a user-friendly
error. The View API issues DML statements through the TAPI
and the TAPI traps all declarative constraint errors, and puts
user-friendly message on the stack, in the preferred language of
the user! Fore more information, see the section, Completeness
of Rule Violations Reported in Front End, in this chapter.</I>
So the only thing you need to do is generate VAPI's, and trap the ORA-20998 message (qms$errors.qms$exception) in an exception handler, where you retrieve the user friendly messages from the message stack!!
Regards, Marc -
Customer Subscreen for Purchase Requisition
Hello All,
I need a custom subscreen on requisition at <b>HEADER</b> level. 'MEREQ001' adds a screen at item level. Is there any Screen Exit / BADI to add a custom screen at header level? Any kind of help is really appreciated.
Thank you all,
ChandniHi Chandi Reddy,
The t.code is ME51 For this available exits are :
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting
LMELA010 Inbound shipping notification: Transfer item data from
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Rece
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition rel
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requi
M06E0004 Changes to communication structure for release purch. d
M06E0005 Role determination for release of purchasing documents
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., previe
MEFLD004 Determine earliest delivery date f. check w. GR (only P
MELAB001 Gen. forecast delivery schedules: Transfer schedule imp
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery toler
MM06E001 User exits for EDI inbound and outbound purchasing docu
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into P
MM06E008 Monitoring of contr. target value in case of release or
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound proces
MMAL0004 ALE purchasing info record distribution: Inbound proces
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001
For t.code we51n the available exits and badi are :
Enhancement/ Business Add-in Description
Enhancement
MEREQ001 Customers' Own Data in Purchase Requisition
Business Add-in
ME_COMMITMNT_PARKING BAdI for Redefining Commitment Interface When Parking
ME_MEREQ_PARKING BAdI Purchase Requisition: "Hold"
ME_REQ_HEADER_TEXT Copy Header Text: Enjoy Purchase Requisition
o.of Exits: 1
o.of BADis: 3
Rewards some points.
Rgds,
P.Naganjana Reddy -
Does anyone know how to speak to human being in customer service for iTunes? I got charged for something and have no clue what I got charged for. I have not used iTunes yet. I have spent a lot of time trying to get this resolved on the apple site and there just seems no way to do it. Thanks.
iTunes Customer Service is an online service unless they feel they need to call you.
iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html > Get iTunes support via Express Lane > iTunes > iTunes Store
Maybe you are looking for
-
Dear guys/Girls, CAN ANY BODY SEND ME THE ANSWERS FOR THE FOLLOWING QUESTIONS :: FOLLOWING ARE THE QUESTIONS : (1) HOW TO SEE THE PERFORMANCE OF BO REPORTS ? (2) WHAT IS THE ROW LEVEL SECURITY IN ADMINISTRATION OF SERVERS? (3
-
HTTP.SYS fails to load after ProLiant NIC driver update on Server 2008 R2
Hi team, This has been driving me crazy for a week and I can't find any reference to solving the problem in Technet or any forums... I have a ProLiant ML350G5 server that I installed Server 2008 R2 on and migrated all my domain AD, DNS, File Services
-
Capital letters in artist name. Difference between ipod classic and iPhone
My ipod classic knows that "Peter Gabriel" and "peter gabriel" is the same artist. But the iphone distinguishes between the 2. This is a really annoying "feature". How come it's different? My wishlist for a iOs 4,1,1 update would be for this feature
-
How to activate / disactivate a servlet with a java client ?
I would like to know how to activate or disactivate a servlet with a java client or an applet ? Thanks...
-
Batch Rename Keyboard Shutcut no longer works
I posted about this before and tried deleting the associated plist files as suggested by Old Toady. It didn't work so I waited until a new install of iphoto and it's back again after fresh install. I've tried making a custom shortcut in system prefs|