How to show the subtotal value of a field without showing the rows in ALV?

Dear All,
In my ALV I am showing the sub total value of a calculated field. But the requirement is, only the category and sub total value will be shown in the ALV not the all rows, i,e
CATEGORY VALUE
Z01 186,000 (the subtotal value)
Here, the rows whose values are calculated to 186,000 will not appear. Plz give some idea.
With regards,
Rosaline.

Hi
Using the fieldcatalog, you can achieve this.
no_out(1) type c, " (O)blig.(X)no out
use this in fieldcatelog. u can achieve this.
All the best
Edited by: Sudeesh Ravindran on Mar 23, 2011 9:22 AM

Similar Messages

How to get the previous value of a field before saving the record

Hi All,
I have a requirement like, listing out the modified field values with their previous value and new value using integration events or any method.
For Ex: If i modify the customer name from "Jack" to "Amith" in the record.
Then i have a requirement to display the message like : CustomerName has changed from "Jack" to "Amith"
Please post your help notes on this.It's Urgent.
Thanks & Regards
Amith

Hello Amith,
How does a user perform the modification? Do you already have access to the existing value when the user makes the update? How are you identifying the record to be updated within CRMOD and what method are you using to perform the update?
Thanks,
Sean

How to get the vlaue from an input field without hitting the enter button ?

Hello All,
Is there some way to read the values of an input field that was filled in by an user eg ..
String userEntry = wdContect.<UIElement>.value;
So far, I am only able to achieve this using the onEnter property whoch really is not very user friendly since I can only read in the values only if the user hits enter.
Any help will be appreciated. Thank you.
from
Kwok Wei

1. Create a value attribute (MyText) in the controller context
2. Create a value attribute (MyText) in the view context
3. Map view context attribute to controller context attribute
4. Create InputField in the view and map the "value" attribute to the MyText view context attribute
5. Create Action on view (Send)
6. Create Send button and specify Send action as onAction attribute
7. Create executeSend() method on controller
8. onActionSend() implementation:
public void onActionSend(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
 //@@begin onActionSend(ServerEvent)
 wdThis.wdGet<controllername>Controller().executeSend();
 //@@end
9. executeSend() implementation:
public void executeSend( )
 //@@begin executeSend()
 // Get MyText
 String MyText = wdContext.currentContextElement().getMyText();

ALV List Display - Is it possible to sum up the subtotal values of field

Hi Experts,
We hav a requirement to do subtotals of the price field for each unique PO Line item, and also to sum up the subtotal values ie. only the subtotal values needs to be added irrespective of the repetation of the po line items in the report.
PO Number                  PO Item              Price
XXXXXXXX                 10                      20
XXXXXXXX                 10                      20
Subtotalled                                          20
YYYYYYY                 10                      10
YYYYYYY                 10                      10
Subtotal showing                                10
We want the total of price to be           30 ie (Subtotal value of XXXX, 10 = 20 and YYYYY,10 = 10 ) but currently do_sum is been used in the fieldcat of the report which displays all the occurances of the record... = 60(202010+10)
Kindly help asap.
Thanks,
Rosy

Hi rosy,
the question pops up to why you have duplicates in the display table. If you
DELETE ADJACENT DUPLICATES FROM
the output table, everything should be fine.
Regards,
Clemens

In mail how do we stop the e-mail's showing as read when you select them without opening the full e-mail

In mail how do we stop the e-mail's showing as read when you select them without opening the full e-mail? I want to click on a mail and read this in the preview pane only without showing it as read.

Not possible. In order to read an email in the preview pane requires opening the message. You can mark a message that you've read as unread after reading it.

How to Check the total value of a field

Hi,
I want to check the total value of a field (this total is obtain by using property of that field thru personalization).
that means , in a table 3 columns are there (col 1, col2 & col3). I personalized the total property as true for col3.
now i'm getting the total for that field.
I want to check that total whether it crossed 100 or not.
How to do this?
Thanks in advance,
SAN

Hi San,
You can achieve by using OATotalRowBean, search for OATotalRowBean in this forum you should be able to get some sample code.
public class OATotalRowBean
extends TotalRowBean
implements OAWebBean, OAWebBeanConstants
A special row rendered at the bottom of a table which lets users see totals for columns which are designated for summing.
Note The total is calculated and displayed only for visible rows.
When you indicate that you want to total one or more columns, the OA Framework creates an OATotalRowBean and designates it as the columnFooter named child of the OATableBean. If the OATableBean is also configured to insert rows (so it has an "Add Another Row" button), then the total bean becomes an indexed child of the add table row bean (see OAAddTableRowBean), which the OA Framework in turn designates as the table's columnFooter object.
If you need to access the table's column footer object for any reason, call the OATableBean's getColumnFooter() method. If row insertions are enabled, this method returns an OAAddTableRowBean; otherwise it returns an OATableRowBean.
For detailed information about creating and working with tables, see OA Framework Developer Guide: Tables.
With regards,
Kali.
OSSi.

I have a iPad and a iPod touch how do I sync both of them to iTunes without mixing the apps, my iPad apps shows up on my iPod which is not good because I only have 8G on the iPod, I would like to keep them separate

I have a iPad and a iPod touch how do I sync both of them to iTunes without mixing the apps, my iPad apps shows up on my iPod which is not good because I only have 8G on the iPod, I would like to keep them separate

Turn Automatic Download off
Settings>iTunes and Apps Store>Automatic Download>Off

How can I add an attachment to an email without showing it in the body of the email?

How can I add an attachment to an email without showing it in the body of the email?

1. You must open attachment first
2. Tap the square with arrow on top right and select mail
3. Compose your email

How can I findout the coulm value contains 0 through 9 for the table

could u plz suggest me how can I findout the coulm value contains <> 0 through 9 for the table...

Well I am going to give it a shot, because I believe I am looking for the same thing.
I have a value that is of type varchar2. How can I determine if it has special characters or alpha characters in it? In other words, I only want the value to consist of numbers. (Initially it had been thought that Letters would be used as well, but now they just want numbers and the datatype of the column cannot be altered since there is data in it.)
I have gotten this far, but I do not know what else I can use besides '[:alpha:]'? I cannot seem to find this documented anywhere...I can find the regexp package reference, but not the character classes...
select regexp_instr('1a23456', '[[:alpha:]]',1,1,1, 'i') x
from dual
This works fine = returns 3, so I know there is an alpha character.
select regexp_instr('1$23456', '[[:alpha:]]',1,1,1, 'i') x
from dual
This returns 0 - what do I need to change so that it detects the '$' and returns 3?
Thanks!!
Janel

How to display the last value of a field in a group in the group header

I need to display the last quiz score from a group of quiz scores as part of the header of a group of units (the quiz score values are in the detail record). I can not use the group footer, which would be the natural place to find the last value. It must be in the group header because there will be a subsequent group within the unit group. In other words, the grouping is as follows:
Unit Group Header (Display last quiz score in unit)
SubUnit Group Header (Display other detail summaries)
Detail Record (including quiz score)
SubUnit Group Footer
Unit Group Footer
While there is a minimum/maximum summary function, there is not a first/last function.
Fuskie
Who is constantly amazed at the ability of users to request report features that are not easily implented through Crystal Reports...

Hi Fuskie,
One suggestion to display the last quiz score in the Group Header, other than what had already been suggested, will be to use a linked subreport in the Group Header. It is not an efficient way to display the information, but it could do the trick.
Another suggestion will be to insert a subreport in the report header, then store the last quiz score in an array for each group, then share it with the main report and display the values in the appropriate group. In this way it will only connect twice to the data source, one for the main report and once for the subreport, instead of multiple connection for each group.
Finally, the most efficient way will be to have this value calculated on the database side using a command object or a stored procedure.
Patrick

Store value in data model without showing it in table

Hi,
How can I store something in my table model without showing it in my table? I have an arraylist which contains a list of my own data objects. I have my own table model like
public class MyTableModel extends AbstractTableModel {
              public Object getValueAt(int row, int col) {
               TableDataObject tdo = (TableDataObject) data.get(row);
               switch(col) {
                    case 0:
                         return tdo.getFoo();
                                 default:
                                         break;
}my "hidden" value is stored in the data list...but I have to get the hidden value from my table model, not from my arraylist.

Nothing to it, but to do it:
import java.awt.*;
import javax.swing.*;
import javax.swing.table.*;
public class ColumnModelExample {
    public static void main(String[] args) {
        Object[] columnNames = {"hidden", "column 1", "column 2"};
        Object[][] rowData = {
            {"hidden 0","row 0, col 1","row 0, col 2"},
            {"hidden 1","row 1, col 1","row 1, col 2"},
        TableModel model = new DefaultTableModel(rowData, columnNames);
        JTable table = new JTable(model);
        TableColumnModel columnModel = table.getColumnModel();
        columnModel.removeColumn(columnModel.getColumn(0));
        JFrame f = new JFrame("ColumnModelExample");
        f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        f.getContentPane().add(new JScrollPane(table));
        f.pack();
        f.setLocationRelativeTo(null);
        f.setVisible(true);
}One typical use of this is for displaying the records of a database table, where you don't want to
show the user a sequence column which would only confuse the user...

How to set a default value for particular field in SRM PO Portal

Dear Gurus,
Im desparetly need a help in web dynpro on how to set a default value for a field(flag) in PO header tab in portal.
My requirement is whenever the user press the edit button in PO screen,automatically a flag field should be set as abap_false.
I dont think this will handle in check badi or change badi. i tried this part in onbuttonpressed overwriteexit in CNR_VIEW views,i can get the function EDIT in debugging mode,but dont know how to proceed further.....
Many of them suggested to go with get attribute and set attribute for changing any particular field in web dynpro,but im not very familiar in using those get and set attributes.I request you people can give me sample code on how to identify my target field in the node and set the values while pressing EDIT Button.
Thanks in advance...
Regards,
Sathish

Dear Laurent,
Thanks for your response,
But i searched in enhancement spot of WD_BADI, but couldnt get the exact way to change the coding,
My real requirement is, that particular flag should be enable and disable dynamically by checking a condition in my header values.So in that case i dont know how to proceed further to handle in the PO screen.
Kinly guide me how to get the particular node of field in the Purchase order screen.
Thanks you in advance,
Sorry for the inconvenience if any
Regards,
sathish

How to set a new value for formula field in crystal reports xi?

How to set a new value for formula field in crystal reports xi?//formula{@description} exemplo in VB6crxSubreport.FormulaFields.Item(1).Text = "'Subreport Formula'" orcrxSubreport.FormulaFields.Item("description").Text = "'Subreport Formula'"How to in JRC? 

Hi,
This functionality is known to be very important and is a key part of the next major release of the JRC planned for the first half of 2008.
Regards,
Blair Wheadon
Product Manager, Crystal Reports

HOW TO SET A DEAFULT VALUE FOR A FIELD?

hi friends
i have doubt..how to set a default value for a field..say like in local printer field i always want lp01 to be displayed defaultly..when i click F1 in that field i get the parameter id ..i know there is something dealt with that parameter id..how can i set that default value ..in the case of the default printer value i made in own data settings as lp01 but how to do it normally for other field which has parameter id ??????
thanks and regards
prince

Hi Prince,
u can set the default value in abap as given below
SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN SKIP 1.
PARAMETERS : S_BUKRS TYPE BSID-BUKRS OBLIGATORY DEFAULT '1000'.
PARAMETERS : S_BELNR TYPE BELNR_D OBLIGATORY DEFAULT '1600000070'.
PARAMETERS : S_GJAHR TYPE GJAHR OBLIGATORY DEFAULT '2008'.
PARAMETERS : ASON TYPE BUDAT OBLIGATORY DEFAULT SY-DATUM.
PARAMETERS : S_KUNNR TYPE KUNNR MODIF ID GP1.
PARAMETERS : S_LIFNR TYPE LIFNR MODIF ID GP2.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN : END OF BLOCK B1.
or
u can give the default value in INITIALIZATION also.
vlue = '1000'.

How to set default date value to a field on screen

How to set default date value to a field on screen and allow users to modify it ....

Hello,
In the PAI module, you need to save the changes to the database using the command MODIFY.
Follow an example:
Create or change a message in database table T100. If there is no message with the number 100 in the MYMSGCLASS message class in English, it will be created. Otherwise only the text is changed.
DATA message_wa TYPE t100.
message_wa-sprsl = 'EN'.
message_wa-arbgb = 'MYMSGCLASS'.
message_wa-msgnr = '100'.
message_wa-text = 'Some new message ...'.
MODIFY t100 FROM message_wa.
Regards.

How to show the subtotal value of a field without showing the rows in ALV?

Similar Messages

Maybe you are looking for