How to skip the Selection screen while using BAPI_MATERIAL_DELETE

Hi,
I have to delete material master.
I'm using BAPI_MATERIAL_DELETE Fm,
But while executing this BAPI it is going to a screen where it is asking to tick the Check Box for material number.
Can you please tell me how to execute the BAPI Avoiding the selection screen.
Thanks & Regards,
Rajender

Hi,
Thanks for replying.
We have to run the BAPI in Background, Then how to achieve the default values.
Thanks & Regards,
Rajender.

Similar Messages

How to Fill the selection screen while calling the transaction

Hi All,
         my requirement is in one of the screen while i will press a push button it will call one transaction and it will fill the selection screen build order number field and skip the first screen i.e the selection screen it will show the output of that report directly.
am using this code .
case sy-ucomm.
while 'FSLR'.
set PARAMETER ID 'ANR' FIELD aufnr.
RANGES s_aufnr FOR afko-aufnr.
      s_aufnr-sign   = 'I'.
      s_aufnr-option = 'EQ'.
      s_aufnr-low    = aufnr.
      APPEND s_aufnr.
CALL TRANSACTION 'ZFS1' USING s_aufnr
     MODE 'E' .
    AND SKIP FIRST SCREEN.
endcase.
here the problem is i cant use both skip screen and using at a time nither the screen is filling nor its skipping the first screen.
but its not working would any one please help how can i do this functionality?

Hi
Do in this way.
DATA: rspar TYPE TABLE OF rsparams WITH HEADER LINE.
rspar-selname = 'S_AUFNR'.
rspar-kind = 'S'.
rspar-sign = 'I'.
rspar-option = 'EQ'.
rspar-low = 'aufnr'.
APPEND rspar.
SUBMIT zfs1_prog VIA SELECTION-SCREEN WITH SELECTION-TABLE rspar AND RETURN.
If this doesnt suit yer requirement, I wud suggest you to use BDC as below.
CALL TRANSACTION 'SE11' USING bdcdata
                       MODE   'E'
                       UPDATE 'A'.

How to skip the Selection screen completely for certain users?

Hi All,
   I want to skip the entire selection screen based on sy-uname. I check if the sy-uname has sufficient authorization and based on that..I want to skip the entire selection screen. How do I do that?

Hi Rachna,
use
<b>SUBMIT program
            with sy-uname = 'TEST'
             and return.</b>
If u specify and return the control will come back and execute the next line in the report.
It is giving the output directly without showing the selection screen.
If u r pressing back also it is not showing the selction screen.
This will work
Regards
Naresh

Skip the selection screen using BDCTAB call transaction

Hi experts,
I am using BDCTAB for call transaction SWI1 I need to skip the selection screen. Can you please tell me how to skip the selection screen using BDC call transaction?
Thank you in advance.....

hi,
the first step is to pass some values to the selection screen, at least Date From and Date To; otherwise, it´ll take a long time. The second step is to emulate the Execute button, which is done with '/08'.
PERFORM fields USING 'BDC_OKCODE' '/08'.
Third step is to catch the programme and screen number.

How do I view a website over the full screen while using the 6 plus in horizontal mode

How do I view a website over the full screen while using the iPhone 6 plus in horizontal mod?

You said you found several domain.sites files.
iWeb uses one at a time to create webpages.
Your webpages, your site, has disappeared with MobileMe.
You have to find a new host and publish there.
But to publish you need one of your domain files.
Try iWebSites to open them :
http://www.wyodor.net/_Demo/Aptana/iWebSites.html

How to Modify the Selection Screen in Report Painter

Hi All,
I am working on Report painter and writer,
can any body helpme how to change the selection screen i.e i want add some more select options to the exisiting roport .
how can i add more select options to the exisiting one
please let me know the Procedure and provide some relevent documents .
Thanks and Best regards.
uma

Hello...
In the program ...we can find the following chunk of code..
selection-screen:begin of block B1 with frame title text-001.
Parameters : ....
select-options:.....
selection-screen:end of block b1.
if we need to add any more user inputs we can write the code inside the existing
selection screen....end of block .
or create a new block ..just the block name should be different...
if we are using select options...we need to declare the table name using the key word for the field on which we are giving select options ....
Tables : BSIK.
Please see the following code:
Imagine :- we have the current selection screen..
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_BUKRS LIKE BSIK-BUKRS DEFAULT SPACE.
SELECT-OPTIONS: S_LIFNR FOR BSIK-LIFNR.
SELECTION-SCREEN END OF BLOCK B1.
we need to add 2 more fields on the selection screen ..this we can do as the following
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_BUKRS LIKE BSIK-BUKRS DEFAULT SPACE.
SELECT-OPTIONS: S_LIFNR FOR BSIK-LIFNR,
                S_HKONT FOR BSIK-HKONT.
PARAMETER: P_DATE LIKE BSIK-BUDAT OBLIGATORY DEFAULT
           SY-DATUM.
SELECTION-SCREEN END OF BLOCK B1.
OR...create a new block...
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
SELECT-OPTIONS:   S_HKONT FOR BSIK-HKONT.
PARAMETER: P_DATE LIKE RFPDO-ALLGSTID OBLIGATORY DEFAULT
           SY-DATUM.
SELECTION-SCREEN END OF BLOCK B2.
there are many options available in selection screens..like creating check box,radio button etc..
for more info press F1 help on the Selection screen in the ABAP editor
Revert back if not clear and reward if helpful
Regards
Byju

How to disable the Selection screens of LDB's ?

Hi,
How to disable the Selection screens of LDB's when we r using the predefined LDB for our executable pgm ? and how to include the predefined LDB can u write the Code for including LDb or if possible give an example of a Pgm using a Predefined LDB?
Thanks & Regards,
Gopi.

Hi Gopi,
Go through the link,
http://www.sapdevelopment.co.uk/hr/hrhome.htm
Regards,
Azaz Ali.

Skipping the selection screen

Moved to correct forum by moderator. Please take care to post in the right forum
Hi Gurus,
I have a situation. I have created a zprogram and want to use it in a std txn LI04, and want to run it as individually as well.
But when it is calling from the std txn it should skip the selection screen and get the values of teh parameters
as teh same in LI04.
Please Advice.
Thanks
Guarav Kapse.
Edited by: Matt on Feb 3, 2009 9:54 AM

Hi,
Do you have any exit from which u'll call your Z prorgram. If yes, you can use the following statements
set parameter id ' id ' field <field name>.
submit <your Z program> and return.
In your zprogram write:
get parameter id ' id ' field <field name>.
It will work.
cheers
gaurav

How to set the full screen mode using setClip method

hi all,
how to set the full screen mode using setClip in that softkeys should not be used insteat on that need to create a own softkeys using commands.
thanks & regards
Bala.

In CS5 there are changes made to how the screen mode is reported. In CS3-CS5 the screen mode has a corresponding number. So for instance if the ScreenMode is set to "Preview Off" and you ask indesign CS3 or CS4 to display the screen mode, it will report "1936552047", while in CS5 it will report "PREVIEW_OFF".
try executing this simple command in respectively CS3, CS4 and CS5 and you will see what I am talking about:
alert(app.activeWindow.screenMode);
there is no difference if you do:
alert(app.activeDocument.layoutWindows[0].screenMode);
The CS5 solution is rather awkward to work with, unless I am missing something? PREVIEW_OFF is not a string, nor is it a number.
Example - doing:
myScreenMode=app.activeDocument.layoutWindows[0].screenMode;
and then trying to reset screenMode by something like:
app.activeDocument.layoutWindows[0].screenMode= myScreenMode
does not work in CS5 of course. It will throw an error. Neither will this line work:
app.activeDocument.layoutWindows[0].screenMode=ScreenModeOptions.myScreenMode;
Any way of working around this?

How to Increase the Selection screen window length width big....

How to Increase the Selection screen window length width big.... I cant able to do some enter text... because of the window size it gives error... can anyone help me out this...
Thanks in advance

hi,
Maximum size is fixed for selection-screen.
Split your text into different lines to fit it.
Create a text element for your text and write it as comments.
selection-screen begin of block b3 with frame title text-041.
selection-screen begin of line.
    parameters : p_all radiobutton group g2 default 'X'.
    selection-screen comment 10(75) text-049.
selection-screen end of line.
selection-screen begin of line.
    parameters : p_iloc radiobutton group g2.
    selection-screen comment 10(75) text-050.
selection-screen end of line.
selection-screen end of block b3.
Regards
Sailaja.

How to display the selection screen fields for selected checkboxes

Hi all,
         I have 7 checkboxes, for each check box we have some seletion screen fields.if i select first check box,i want to display first slection screen fields only.
and if we select more than one check box how to display the selection screen fields for selected check boxes,please help me this
Thanks
sriman.

hi,
Try this code
report z_13317_sdn2.
tables : mara, marc, dd03l.
parameters : p_chk1 as checkbox user-command ABC,
             p_chk2 as checkbox user-command PQR,
             p_chk3 as checkbox user-command XYZ.
select-options : s_matnr for mara-matnr modif id A,
                 s_ersda for mara-ersda modif id A,
                 s_werks for marc-werks modif id B,
                 s_lvorm for marc-lvorm modif id B,
                 s_tab for dd03l-tabname modif id C.
data: v_chk1,
      v_chk2,
      v_chk3.
at selection-screen output.
loop at screen.
    if screen-group1 = 'A' or
       screen-group1 = 'B' or
       screen-group1 = 'C'.
        screen-input = 0.
       modify screen.
    endif.
endloop.
loop at screen.
    if v_chk1 = 'X'.
      if screen-group1 = 'A'.
        screen-input = 1.
        modify screen.
      endif.
    endif.
    if v_chk2 = 'X'.
      if screen-group1 = 'B'.
        screen-input = 1.
        modify screen.
      endif.
    endif.
    if v_chk3 = 'X'.
      if screen-group1 = 'C'.
        screen-input = 1.
        modify screen.
      endif.
    endif.
endloop.
at selection-screen.
if sy-ucomm = 'ABC'.
    if v_chk1 = ' '.
      v_chk1 = 'X'.
    else.
      v_chk1 = ' '.
    endif.
endif.
if sy-ucomm = 'PQR'.
    if v_chk2 = ' '.
      v_chk2 = 'X'.
    else.
      v_chk2 = ' '.
    endif.
endif.
if sy-ucomm = 'XYZ'.
    if v_chk3 = ' '.
      v_chk3 = 'X'.
    else.
      v_chk3 = ' '.
    endif.
endif.
Regards,
Sailaja.

How to display the selection screen with icons as well as with text element

How to display the selection screen with icons as well as with texts (written in text elements) for PlantDate, OrderType,WareHouse..

Report zex33.
type-pools: icon.
selection-screen begin of line.
selection-screen comment 1(20) text_001.
parameters: p_werks type marc-werks.
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(20) text_002.
parameters: p_whouse(10).
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(20) text_003.
parameters: p_auart like vbak-auart.
selection-screen end of line.
initialization.
write ICON_PLANT as icon to text_001.
concatenate text_001 text-001 into text_001 separated by space.
write ICON_WAREHOUSE as icon to text_002.
concatenate text_002 text-002 into text_002 separated by space.
write ICON_ORDER as icon to text_003.
concatenate text_003 text-003 into text_003 separated by space.

How to improve the load performance while using Datasources for the Invoice

HI All,
How to improve the load performance while using Datasources for the Invoice . Actually my invoice load (Appx. 0.4 M records) is taking very long time nearly ~16 to 18 hrs to update data from R/3 to 0ASA_DS01.
If I load through flat file it will load with in ~20 Min for the same amount of data.
Please suggest how to improve load performance.
PS: I have done the Inpo package settings as per the OSS note.
Regads
Srininivasarao.Namburi.

Hi Srinivas,
Please refer to my blog posting [/people/divyesh.jain/blog/2010/07/20/package-size-in-spend-performance-management-extraction|/people/divyesh.jain/blog/2010/07/20/package-size-in-spend-performance-management-extraction] which gives the details about the package size setting for extractors. I am sure that will be helpful in your case.
Thanks,
Divyesh
Edited by: Divyesh Jain on Jul 20, 2010 8:47 PM

Error message at the selection screen while processing screen logic

Hi All,
I need to show error message at the selection screen.
I am calling the screen inside the START-OF-SELECTION, and processing the calculation and putting the data into i_final internal table. If internal table I_FINAL is empty I have to show error message saying ' DATA is empty' , this error message should be shown at the SELECTION SCREEN (Report input screen 1000) and provide the user to enter the input values once again.
But whenever I am populating error message, I am getting a pop up to chose exit, and process is terminating.
Since I am in the middle of the screen processing whenever I am giving a error message.
Please let me know how can I populate error message without terminating the process while I was in the middle of the screen processing logic.
Regards,
Mahesh

hi
If u are trying to validate a field use
AT SELECTION_SCREEN ON <field>
if want to validate a block
AT SELECTION SCREEN ON <block>
If Universal Validation
AT SELECTION SCREEN
and display a 'E' Message inside the block.
You can Enter Correct Value and start processing Forward.
hope this will help.
Regards
Sumit Agarwal

How to skip the first screen in se38

hi experts,
   I am struck up somewhere in getters and setters in field symbols.
I am setting the file name field in se38 and trying to directly go to display mode of the program and i am doing that through RS_SPOOL_ACCESS . I am not able to skip the first screen of se38 and go to diplay mode of the program.
How can i do that. Skip first screen is not working.

If all else fails, partial BDC may be in order.
report zrich_0003
       no standard page heading line-size 255.
data:   bdcdata type table of bdcdata with header line.
parameters: p_prog(30) type c.
start-of-selection.
perform bdc_dynpro      using 'SAPLWBABAP' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                                'RS38M-PROGRAMM'.
perform bdc_field       using 'BDC_OKCODE'
                                '=SHOP'.
perform bdc_field       using 'RS38M-PROGRAMM'
                         p_prog.
perform bdc_field       using 'RS38M-FUNC_EDIT'
                                'X'.
call transaction 'SE38' using bdcdata mode 'E'.
*        Start new screen                                              *
form bdc_dynpro using program dynpro.
clear bdcdata.
bdcdata-program = program.
bdcdata-dynpro   = dynpro.
bdcdata-dynbegin = 'X'.
append bdcdata.
endform.
*        Insert field                                                  *
form bdc_field using fnam fval.
clear bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
append bdcdata.
endform.
Regards,
Rich Heilman

How to skip the Selection screen while using BAPI_MATERIAL_DELETE

Similar Messages

Maybe you are looking for