How to solve the delay from 'SWW_WI_ADMIN_CALLBACK'.
Hi expert,
We have a workflow in Send Notified vai SAP Express and
E-mail step that is delayed occasionally. Each time it happens, I've noticed that the log (see below) contains an entry for SWW_WI_ADMIN_CALLBACK that executes
for 10 to 15 minutes before the next step of the
workflow. This does not happen all the time, only occasionally.
Workflow System (Sub)workflow created 15.07.2008 10:08:12
Workflow System Execution started automatically 15.07.2008 10:08:12
Workflow System SWW_WI_ADMIN_CALLBACK 15.07.2008 10:20:05
I want your help about
- What's 'SWW_WI_ADMIN_CALLBACK' ?
- How to solve the problem ?
Thanks for your help.
KP.
Have either of you tried a Reset Settings yet? (Settings App -> General -> Reset -> Reset All Settings NOT Erase All Content and Settings.) You could also try just the "Reset Network Settings" first too. Resetting settings will purge your lock screen and wallpaper, and probably some other things that will be annoying for a bit (like turning back on the keyboard clicking sound,) but it seemed to help my problems.
I work on iPhone problems all day (mostly backup and restore right now), so I collect a lot of the debugging logs. I saw a lot of networking error garbage on my 5S right after upgrading from iOS7 that was vastly reduced after doing a reset all settings (I wish I would have tried just Reset Network Settings first, so I knew if that worked alone.)
If that still doesn't help, I would love to take a look at your phone debug logs (like I said, I do iPhone troubleshooting all day, so investigating and hopefully fixing a serious problem sounds exciting to me ) If you want, you can contact me through my company's webpage: http://deciphertools.com/support.html and we can start looking at what kind of errors are happening while the wifi is acting up. You can mention my name directly, Kelly, so you know the message gets to me! (This is an open invitation to anyone having serious wifi problems after the update, not just mendoSYK and tragic330.)
(Note: As I mentioned, the link I am posting is to my company's website. So, I stand to benefit, financially or otherwise, from the link I am providing.)
Similar Messages
-
I need to continuously acquire data from daqmx card, write into a file and at the same time corelate (in terms of time) the data with signals from other instruments. The current problem is that there is time delay during read and write data into buffer,thus causing misalignment of the data from multiple instruments. Is there a way to solve the delay? or Is there a way to mark the time of the data acquisition in the buffer? If I know the starting time (e.g. 0) of data acquisition and sampling rate (e.g. 1kHz), can I simply add 1ms to each data sample in the buffer? The current code is shown below.
void DataCollectionWin::ConnectDAQ()
DAQmxErrChk(DAQmxCreateTask ("", &taskHandle));
DAQmxErrChk(DAQmxCreateAIVoltageChan(taskHandle,"Dev1/ai0,Dev1/ai1,Dev1/ai2,Dev1/ai3,Dev1/ai4,Dev1/ai5,Dev1/ai16,Dev1/ai17,Dev1/ai18,Dev1/ai19,Dev1/ai20,Dev1/ai21,Dev1/ai6,Dev1/ai7,Dev1/ai22","",DAQmx_Val_Cfg_Default,-10.0,10.0,DAQmx_Val_Volts,NULL));
DAQmxErrChk(DAQmxCfgSampClkTiming(taskHandle,"",1000.0,DAQmx_Val_Rising,DAQmx_Val_ContSamps,60000));
DAQmxErrChk (DAQmxRegisterEveryNSamplesEvent(taskHandle,DAQmx_Val_Acquired_Into_Buffer,50,0,EveryNCallback,NULL));// Every 50 samples the EveryNSamplesEvent will be trigured, to reduce time delay.
DAQmxErrChk (DAQmxRegisterDoneEvent(taskHandle,0,DoneCallback,NULL));
DAQmxErrChk (DAQmxStartTask(taskHandle));
int32 CVICALLBACK EveryNCallback(TaskHandle taskHandle, int32 everyNsamplesEventType, uInt32 nSamples, void *callbackData)
DAQmxErrChk (DAQmxReadAnalogF64(taskHandle,50,10.0,DAQmx_Val_GroupByScanNumber,data,50*15,&read,NULL));
//memcpy(l_data,data,6000);
SetEvent(hEvent);
l_usstatus_e[0]=g_usstatus[0];// signals from other instruments that need to be corelated with the data from daq cards.
l_optstatus_e[0]=g_optstatus[0];
if( read>0 ) // write data into file
//indicator=1;
for (i=0;i<read;i++)
{ //fprintf(datafile,"%d\t",i);
fprintf(datafile,"%c\t",l_usstatus_s[0]);
fprintf(datafile,"%c\t",l_usstatus_e[0]);
fprintf(datafile,"%c\t",l_optstatus_s[0]);
fprintf(datafile,"%c\t",l_optstatus_e[0]);
fprintf(datafile,"%.2f\t",data[15*i]);
// sprintf( pszTemp, "%f", data[6*i]);
// pListCtrl->SetItemText(0, 2, pszTemp);
//pWnd->m_trackinglist.SetItemText(0, 2, pszTemp);
fprintf(datafile,"%.2f\t",data[15*i+1]);
fprintf(datafile,"%.2f\t",data[15*i+2]);Hello kgy,
It is a bit of a judgment call. You should just choose the board that you think has the most to do with your issue. For example, this issue was much more focused on setting up your data acquisition task than the Measurement Studio environment/tools, so the MultifunctionDAQ board would have been the best place for it. As for moving your post to another board, I do not believe that is possible.
Regards,
Dan King -
How to solve the problem related with inputing of the text into Wordpress from Firefox 9 and 9.0.1.
The problem is that after inputing the formatting gets lost.
Taking in account high popularity of Wordpress I suppose the problem is quite serious.Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[Troubleshooting extensions and themes]]
* Clipboard not working -> [http://kb.mozillazine.org/Clipboard_not_working]
* Rich Text Editing -> [http://kb.mozillazine.org/Rich_text_editing]
* Update All your Firefox Plugins -> [https://www.mozilla.org/en-US/plugincheck/]
Check and tell if its working.
Might not be related to your problem but some of your Plugins are out-dated
* Update All your Firefox Plugins -> [https://www.mozilla.org/en-US/plugincheck/]
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)''' -
How to get the Month from no of week
Dear Friendz
I have one variable which contains the value as 200547 where 2005 is the year and 47 is the no of week.
now i want to get the month from the no of week.
so how to solve the problem???
thank in advance.
Regards
nilesh sheteHi,
report ztest.
data: myweek type SCAL-WEEK,
mydate type SCAL-DATE,
mymonth(2).
myweek = '200547'.
call function 'WEEK_GET_FIRST_DAY'
EXPORTING
WEEK = myweek
IMPORTING
DATE = mydate
EXCEPTIONS
others = 9.
mymonth = mydate+4(2).
write mymonth.
Svetlin -
Hello, I just got an iPhone 4S and it seems that the bluetooth function in it doesn't work. I tried few times to pair it to other non Apple phones but it never worked. Does anyone has an idea how to solve the problem? Tks.
This is not a feature of iPhone, iPad or iOS.
Bluetooth is supported for stereo headsets/speakers, handsfree telephone
devices/headsets, some keyboards, some peer-to-peer apps from the
app store and internet tethering where provided by the carrier.
Other than this it will not connect to a phone/computer/device. (thanks to ckuan for the wording) -
how to solve the problem when opening program illustrator cs6
ERROR: 16
It is WINDOWS 8.1 / 64 BIT
help pleaseThanks, Jeff! The file Adobe Setup Error.log contains the following information:
02/14/14 07:20:26:474 | [INFO] | | OOBE | DE | | | | 8860 | DEVersion: 5.0.0.0
02/14/14 07:20:26:475 | [INFO] | | OOBE | DE | | | | 8860 | Loading library from C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\DE5\Setup.dll
[ 8860] Fri Feb 14 07:20:26 2014 INFO
::START TIMER:: [Total Timer]
CHECK: Single instance running
CHECK : Credentials
Load Deployment File
CHECK : Another Native OS installer already running
Create Required Folders
Assuming uninstall mode
Lookup for master payload
[ 8860] Fri Feb 14 07:20:26 2014 ERROR
DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
[ 8860] Fri Feb 14 07:20:26 2014 INFO
:: END TIMER :: [Total Timer] took 6.90443 milliseconds (0.00690443 seconds) DTR = 579.338 KBPS (0.56576 MBPS)
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s), 0 warning(s)
ERROR: DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
Please search the above error/warning string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
Exit Code: 33 - The product is not installed, cannot uninstall.
Please see specific errors and warnings for troubleshooting. For example, ERROR: DW040 ... -
How to take the data from sage system to sap r/3
hi expects,
how to take the data from sage system to sap r/3? which adapter is to be used?what is the format of data in sage system?how the scenarios will work ? please help me in solving this problem?hi rohit,
the data transfer can be done by using SOAP adapter
do chk this link
http://www.sage.org/lists/sage-members-archive/2001/msg01718.html
http://www.sage.org/lists/sage-members-archive/2001/msg01739.html
thanx
Sampath -
Downloading and installing the iOS5.0.1 Following problems occured: with my iPhone 4s: Phone calls are dropping out in UAE, how to solve the problem?
You're not speaking to Apple on in this forum, nor will someone from Apple see this post. We are just users like you and I.
Have you tried to restore or reset your phone?
Or contact your carrier in re: to your sim card -
I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem? I've copied the logs that I found for each kernel panic that still have the message logged. Please help if you can, I have read some of the other comments and perhaps it has something to do with my anti-virus software being on at start up. I have copied the log here. Any advice will be welcome.
Interval Since Last Panic Report: 665204 sec
Panics Since Last Report: 8
Anonymous UUID: D6DCC90D-A5CA-4BBE-A435-3E64A512A51B
Sat May 26 07:23:05 2012
panic(cpu 3 caller 0xffffff80002b4f36): trying to interlock destroyed mutex (0xffffff801a489be0)
Backtrace (CPU 3), Frame : Return Address
0xffffff8160313b00 : 0xffffff8000220792
0xffffff8160313b80 : 0xffffff80002b4f36
0xffffff8160313b90 : 0xffffff8000227e68
0xffffff8160313bd0 : 0xffffff7f80d14250
0xffffff8160313c20 : 0xffffff7f80d14f73
0xffffff8160313cc0 : 0xffffff800059a237
0xffffff8160313d00 : 0xffffff8000586cbf
0xffffff8160313d20 : 0xffffff800057e6e3
0xffffff8160313df0 : 0xffffff800057ed06
0xffffff8160313e20 : 0xffffff8000583c52
0xffffff8160313e70 : 0xffffff8000583d05
0xffffff8160313e90 : 0xffffff80005358b4
0xffffff8160313ef0 : 0xffffff80005367c3
0xffffff8160313f30 : 0xffffff8000536897
0xffffff8160313f60 : 0xffffff80005ccfe8
0xffffff8160313fb0 : 0xffffff80002da5e9
Kernel Extensions in backtrace:
com.intego.iokit.VBX6NKE(1.0)[211D5E46-3E43-C5DC-9C6A-8C3FFF0F4493]@0xffffff7f8 0d11000->0xffffff7f80d1bfff
dependency: com.apple.iokit.IONetworkingFamily(2.1)[2FCC16E1-34AB-3908-98BD-CCBFA56FFDCE]@0 xffffff7f809b7000
BSD process name corresponding to current thread: iStatLocalDaemon
Mac OS version:
11E53
Kernel version:
Darwin Kernel Version 11.4.0: Mon Apr 9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
System model name: iMac11,2 (Mac-F2238AC8)
System uptime in nanoseconds: 69777074610
last loaded kext at 58265763561: com.intego.iokit.VBX6NKE 1 (addr 0xffffff7f80d11000, size 45056)
loaded kexts:
com.intego.iokit.VBX6NKE 1
com.intego.iokit.BehavioralKext 1
com.intego.kext.VirusBarrier.AppBarrierKPI 10.6.8
com.intego.kext.VirusBarrierKPI 10.6.8
com.globaldelight.driver.BoomDevice 1.1
com.huawei.driver.HuaweiDataCardACMData 4.2
Model: iMac11,2, BootROM IM112.0057.B01, 2 processors, Intel Core i3, 3.2 GHz, 12 GB, SMC 1.64f5
Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.64.8-P2P
Bluetooth: Version 4.0.5f11, 2 service, 18 devices, 1 incoming serial ports
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0606, 0xfa140000 / 5
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0606, 0xfa141000 / 9
USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfa141100 / 8
USB Device: CanoScan, 0x04a9 (Canon Inc.), 0x1904, 0xfa141200 / 6
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: HUAWEI Mobile, 0x12d1 (Huawei Technologies Co., Ltd.), 0x1001, 0xfd130000 / 5
USB Device: My Passport 070A, 0x1058 (Western Digital Technologies, Inc.), 0x070a, 0xfd140000 / 6
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3Immediate suspects are the additions you added to you rsystem that installed kexts (drivers). From above,
com.intego.iokit.VBX6NKE 1
com.intego.iokit.BehavioralKext 1
com.intego.kext.VirusBarrier.AppBarrierKPI 10.6.8
com.intego.kext.VirusBarrierKPI 10.6.8
com.globaldelight.driver.BoomDevice 1.1
com.huawei.driver.HuaweiDataCardACMData 4.2
Two experiments you can try.
1. Boot in safe mode and see if you can shut down normally. All thise additions won't be running in safe mode so this test would indicate it is one of them causing the problem.
2. Uninstall all the intego VirusBarrier stuff. That's my first guess and the troublemaker. -
How to copy the payload from onMessage Activity in BPEL interface
Hi All,
how to copy the payload from onMessage Activity in BPEL interface when it is there at the starting of the process and when clicking on the OnMessage Activity
i'm able to see the View XML Document link. By Clicking on View XML Document Payload is getting opened for me but at this point i'm not able to copy the payload and more over the scroll bar is also not there.
When i'm saving it as .xml i'm able to see the payload but not in an xml format.
When trying the payload in SOAPUI it's not getting reformatted.
How can we solve the issue.
Regards,
CHThe input payload can be seen from "Audit Trail" tab and "Flow" tab of any BPEL instance. The XML shown in "Flow" tab are not rightly formatted XMLs and you may not able to copy them "as is" to a text editor. But, the XML shown in "Audit Trail" should be in the right XML format and you should be able to click on any audit trail entry and copy the XML payload to a text editor. soapUI should also be able to format such XMLs without any issue. Just make sure that you don't overwrite soap header/body section when pasting to soapUI request.
-
How to capture the data from JOBLOG
Hi Experts,
When we execute 'F110' transaction code it creates a joblog.
I need to capture the joblog data through 'Z' program and it should display the joblog data in SO01 transaction code.
The above process goes through when we execute 'F110' Transaction.
So, Please help me how to solve the above issue.
<b><REMOVED BY MODERATOR></b>
Thanks,
vinay.
Message was edited by:
Alvaro Tejada GalindoTo capture job logs, try this:
Get job log
select single joblog into tbtco-joblog from tbtco
where jobname = <your jobname>
and jobcount = <your jobcount>.
check sy-subrc = 0.
Convert to message type
call function 'COMMON_LOG_READ_T100'
exporting
client = sy-mandt
logname = tbtco-joblog
tables
logtable = logtable
exceptions
logname_missing = 1
log_handle_error = 2
log_is_empty = 3
log_not_found = 4
temse_conversion_not_possible = 5
temse_error = 6
temse_function_error = 7
others = 8.
logtable will contain message ID, message type, message number, etc. from T100. -
How to remove the Object from memory.
Hello.
Flash file that i made with Flex Builder uses memory too
much.
Look at the next example source code.
var testCan:Canvas = new Canvas();
this.addChild(testCan);
this.removeChild(testCan);
testCan = null;
but just memory usage still goes up, is not freed instantly.
so if i load the large flash files on my web browser,
after 5 munites or something, the web browser is down.
How to remove the object from memory immediately without
delay?It's all about the Garbage Collector ..
There is a nice write up here :
http://www.gskinner.com/blog/archives/2006/06/as3_resource_ma.html -
Script:how to solve the following
Hi to all,
Can u please tell me how to solve the following:
Created standard texts, styles, character strings and called them in layout sets copied the standard layout set from client '000' further modified the layout according to requirements.
Thanks in advance.
Regards
MonalisaSTATUS in USER_OBJECTS
"OBJECT_NAME"
"SUBOBJECT_NAME"
"OBJECT_ID"
"DATA_OBJECT_ID"
"OBJECT_TYPE"
"CREATED"
"LAST_DDL_TIME"
"TIMESTAMP"
"STATUS"
"TEMPORARY"
"GENERATED"
"SECONDARY"
"NAMESPACE"
"EDITION_NAME"
"CUSTOMERS"
70645
70645
"TABLE"
03-AUG-13
03-AUG-13
"2013-08-03:17:59:09"
"VALID"
"N"
"N"
"N"
1
"CUSTOMERS_PK"
70646
70646
"INDEX"
03-AUG-13
03-AUG-13
"2013-08-03:17:59:09"
"VALID"
"N"
"N"
"N"
4
"DEPARTMENTS_PK"
70656
70656
"INDEX"
03-AUG-13
03-AUG-13
"2013-08-03:18:32:32"
"VALID"
"N"
"N"
"N"
4
"EMPLOYEES"
70657
70657
"TABLE"
03-AUG-13
03-AUG-13
"2013-08-03:18:32:57"
"VALID"
"N"
"N"
"N"
1
"DEPARTMENTS"
70655
70655
"TABLE"
03-AUG-13
03-AUG-13
"2013-08-03:18:32:32"
"VALID"
"N"
"N"
"N"
1
"EMPLOYEES_PK"
70658
70658
"INDEX"
03-AUG-13
03-AUG-13
"2013-08-03:18:32:57"
"VALID"
"N"
"N"
"N"
4
"SUPPLIERS"
70659
70659
"TABLE"
03-AUG-13
03-AUG-13
"2013-08-03:20:25:41"
"VALID"
"N"
"N"
"N"
1
"SUPPLIERS_PK"
70660
70660
"INDEX"
03-AUG-13
03-AUG-13
"2013-08-03:20:25:41"
"VALID"
"N"
"N"
"N"
4
"PRODUCTS"
70661
70661
"TABLE"
03-AUG-13
03-AUG-13
"2013-08-03:20:28:32"
"VALID"
"N"
"N"
"N"
1
"PRODUCTS_PK"
70662
70662
"INDEX"
03-AUG-13
03-AUG-13
"2013-08-03:20:28:32"
"VALID"
"N"
"N"
"N"
4
"PERSONS_PK"
70687
70687
"INDEX"
10-AUG-13
10-AUG-13
"2013-08-10:22:37:34"
"VALID"
"N"
"N"
"N"
4
"PERSONS"
70686
70686
"TABLE"
10-AUG-13
10-AUG-13
"2013-08-10:22:37:34"
"VALID"
"N"
"N"
"N"
1
"APEX_SYS_PCK"
70776
0
"PACKAGE"
13-AUG-13
15-AUG-13
"2013-08-15:19:56:47"
"INVALID"
"N"
"N"
"N"
1
"GET_LOGIN_CREDENTIALS"
70775
0
"PROCEDURE"
13-AUG-13
13-AUG-13
"2013-08-13:22:26:49"
"INVALID"
"N"
"N"
"N"
1
"APEX_SYS_PCK"
70792
0
"PACKAGE BODY"
15-AUG-13
15-AUG-13
"2013-08-15:19:56:47"
"INVALID"
"N"
"N"
"N"
2
"EMP_MAINT"
70802
0
"PACKAGE"
15-AUG-13
15-AUG-13
"2013-08-15:19:54:39"
"INVALID"
"N"
"N"
"N"
1 -
how to solve the warning and severe error....................
[oracle@ip-********* Oracle11g_R2]$ emca -deconfig dbcontrol db -repos drop
STARTED EMCA at Mar 29, 2012 10:20:41 PM
EM Configuration Assistant, Version 11.2.0.0.2 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: testdb11g3
Listener port number: 1521
Password for SYS user:
Password for SYSMAN user:
Do you wish to continue? [yes(Y)/no(N)]: y
Mar 29, 2012 10:22:13 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /u02/oracle/Oracle11g_R2/cfgtoollogs/emca/testdb11g3/emca_2012_03_29_22_20_40.log.
Mar 29, 2012 10:22:13 PM oracle.sysman.emcp.EMDBPreConfig performDeconfiguration
WARNING: EM is not configured for this database. No EM-specific actions can be performed.
Mar 29, 2012 10:22:13 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM
Configuration Assistant again .
Refer to the log file at /u02/oracle/Oracle11g_R2/cfgtoollogs/emca/testdb11g3/emca_2012_03_29_22_20_40.log for more details.
Could not complete the configuration. Refer to the log file at
/u02/oracle/Oracle11g_R2/cfgtoollogs/emca/testdb11g3/emca_2012_03_29_22_20_40.log for more details.
[oracle@ip-******* Oracle11g_R2]$ cdtried but getting the same error.............
[oracle@ip-10-68-199-69 oracle]$ lsnrctl start
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 29-MAR-2012 23:37:21
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Starting /u02/oracle/Oracle11g_R2/product/11.2.0/dbhome_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.2.0.1.0 - Production
System parameter file is /u02/oracle/Oracle11g_R2/product/11.2.0/dbhome_1/network/admin/listener.ora
Log messages written to /u02/oracle/Oracle11g_R2/diag/tnslsnr/ip-10-68-199-69/listener/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 29-MAR-2012 23:37:21
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u02/oracle/Oracle11g_R2/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u02/oracle/Oracle11g_R2/diag/tnslsnr/ip-10-68-199-69/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
The listener supports no services
The command completed successfully
[oracle@ip-10-68-199-69 oracle]$ sqlplus
SQL*Plus: Release 11.2.0.1.0 Production on Thu Mar 29 23:37:34 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter user-name: sys/Ashwin
ERROR:
ORA-28009: connection as SYS should be as SYSDBA or SYSOPER
Enter user-name: sys/Ashwin as sysdba
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> startup
ORA-01081: cannot start already-running ORACLE - shut it down first
SQL> shutdown abort
ORACLE instance shut down.
SQL> startup
ORACLE instance started.
Total System Global Area 1603411968 bytes
Fixed Size 2213776 bytes
Variable Size 402655344 bytes
Database Buffers 1191182336 bytes
Redo Buffers 7360512 bytes
Database mounted.
Database opened.
SQL> exit
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
[oracle@ip-10-68-199-69 oracle]$ emca -deconfig dbcontrol db -repos drop
STARTED EMCA at Mar 29, 2012 11:55:28 PM
EM Configuration Assistant, Version 11.2.0.0.2 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: testdb11g3
Listener port number: 1521
Password for SYS user:
Password for SYSMAN user:
Do you wish to continue? [yes(Y)/no(N)]: y
Mar 29, 2012 11:55:57 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /u02/oracle/Oracle11g_R2/cfgtoollogs/emca/testdb11g3/emca_2012_03_29_23_55_27.log.
Mar 29, 2012 11:55:57 PM oracle.sysman.emcp.EMDBPreConfig performDeconfiguration
WARNING: EM is not configured for this database. No EM-specific actions can be performed.
Mar 29, 2012 11:55:57 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
Refer to the log file at /u02/oracle/Oracle11g_R2/cfgtoollogs/emca/testdb11g3/emca_2012_03_29_23_55_27.log for more details.
Could not complete the configuration. Refer to the log file at /u02/oracle/Oracle11g_R2/cfgtoollogs/emca/testdb11g3/emca_2012_03_29_23_55_27.log for more details. -
Dear sirs,
how to solve the mail problem which occurs while I am abroad; bearing in mind that I use HOTSPOT and sometime it's sending emails sometime getting the below messages " SMTP Relay "Message rejected"The outgoing mail server is rejecting mail from your network address. Typically that happens when your mail service provider is also your ISP, and you connect to it from another network. The SMTP server will allow connections without a password from anywhere, but it will only relay mail from within the ISP's network. It could also be that your account on the server has expired or been suspended.
If you need to send mail from outside your ISP's network, use an independent mail service provider. I don't have a specific recommendation.
Maybe you are looking for
-
How to restrict a characteristic in hierarchy
Hello, I have created a heirarchy of 0PROJECT characteristic (that has 0GL_ACCOUNT as external characteristic), and it is not gettin filtered in my report. The hierarchy is defined like this: NODE1 (text) --> 0GL_ACCOUNT (account number) --> 0PROJECT
-
Hi, I have requirement to use a Fact Column (Eg: Control flag) to be used in the Column Prompt. What is the best way of using it such that query performance will improve. If I use it directly it might have scan through my entire fact table which will
-
Why am I getting kicked out of every app on my ipad2
For the past few days any app I go into I get kicked out of. I thought it was my wifi at home. But it does it every where. This has happened before the upgrade and after the upgrade to 6.0.1. I have also turned it off and back on several times. Jus
-
Java.lang.UnsatisfiedLinkError: initializeAllNative2 on PolicyEvaluator
Hi, I am running the sample policy evaluation program , /opt/SUNWam/samples/policy/PolicyEvaluation.java, and getting these messages: Exception in thread "main" java.lang.UnsatisfiedLinkError: InitializeAllNative2 at org.mozilla.jss.CryptoManage
-
Since lion why can I not append a file when replying to an email
I find the new email a real problem. Many times I can't find an email because it is in a group that is now determined by the software. I use dot be able attach a file when reokying to and email from some one or one that I sent and then someone replie