How to solve the issue of 'Unable to join the network' on my iPhone 5!?
I used to connect to a wifi network on my iPhone 5 and suddenly i could not connect anymore to this network. My phone kept showing 'Unable to join the network'. I tried 'forget this network' and resetting the network settings but none of these solutions worked. Can anyone help me to resolve this issue?
Hi Jason,
Please try with scope provided: Maven – Introduction to the Dependency Mechanism
Kind Regards,
Alex
Similar Messages
-
After getting 4G with AT&T I am unable to join my network and get the error message: Unable to join the network "Jude". How do I fix this? Thank yo
Try power-cycling your wireless router (unplg for 30 seconds, plug back in). Here's a longer list of troubleshooting steps: http://support.apple.com/kb/TS1398.
-
How do I configure the setting in my iphone to allow me use of my own network?
Thanks for the responses, they have been very illuminating!
This is very disappointing from The Carphone Warehouse. If they had mentioned this when I went into their stores, I wouldn't have completed the purchases. I bought two phones at separate outlets and neither of them told me this.
I have been in contact with T-Mobile already as I thought they had sneakily applied a software update that locked the phone. They have denied locking it and suggest that it is something that Apple do. Their solution was a factory reset.
I have a call logged with Apple this afternoon, so will see what they suggest. Hopefully they will give me something that I can take to The Carphone Warehouse or T-Mobile. -
IOS7.0.4 unable to join the network
hi guys,
im sure a lot of you have the same wifi issues with "unable to join the network", so i upgraded to iOS7.4 and hoping it to work. sadly NO.
had anyone found a solution yet?
the issue:
since upgrading to 7.0.3 (later I upgraded to 7.0.4), wifi of iphone 5c had stopped working. tested with multiple ssid from different vendor cisco, linksys, d-link and netgear. tried on networks with open authentication, wep, wpa1/2 PSK, 802.11x and etc.
the troubleshooting i've done:
1. other devices are able to connect to the SSID without a problem. not a wireless router problem.
2. my phone was working at 7.0.1, stoppped working since 7.0.3. not a hardware issue (assume iOS7 does not fail hardware)
3. followed http://support.apple.com/kb/TS1398; and reset settings multiple times and reboot, no luck
4. from cisco wlc debug, i can see AP sent association (authentication passed) message back to iphone, but iphone failed to proceed with assocation and displayed "unable to join the network 'ssid'"
please help.
thanks in advanced
BenTo yuangkuan,
My method is to introduce change into the setup. Even thought the wifi router works fine for the other devices, this iphone5 can't talk properly with the router. We can tweak either the iphone side or the router side.
1. Don't use auto wifi join. Click on "other network" among the list.
Type in your router's SSID, first set security to NONE (set router side to use no security for the time being too)
2. Enter a fixed IP address on your iphone. On the wifi router, enter your iphone's MAC address, set up an IP, for example if your range is 192.168.0.XXX, give it an address of 192.168.0.100
giving the last octet .100 ought to get it out of the way
On the wifi router, look at the list of attached devices to see if there other attached devices.
Bump off the other devices for the time being, by setting the security to NONE.
Set it to 802.11g if you have to. Set g mode to use only 20MHz.
We want to establish that your iphone5's wifi is working *at all*.
If you can get on your wifi router using minimalistic settings, ie 802.11g, no secuirty, fixed ip address, etc, then we can ratchet up the settings.
If all else fails, then it is possible that your phone's wifi chip's battery maintained parameters are messed up. You'll have to find a way to replicate the "power chord pull" (removal of power completely) from your iphone. This can be accomplished by running the battery to a complete zero% or physically pulling the battery connection connector inside the phone.
My laptop's wifi has been this state several times: my vpn timed out, and my laptop's wifi got into such a confused state that even a reboot or shutdown-power up would not fix it. I had to pull the battery out of the laptop, and sometimes even pull the power plug from the wifi router to get the wifi to work again.
Best regards. -
Unable to join the environment
I run my Berkeley DB XML application in Glassfish 3.
I stopped the server for a moment I when I restarted it, I couldn't open the environment.
I tried from the shell too and I can join the environment.
/usr/local/BerkeleyDBXML.2.5/bin/db_checkpoint -1db_checkpoint: unable to join the environment
I tried with other commands: dbxml, db_load... but I got the same error: unable to join the environment
How can I recover my environment.
Thank you so muchHi,
did you try to run the db_recover utility?
Vyacheslav -
HT1695 unable to join the network
Has anyone ever had an ipad that worked fine for weeks, then got the error message "unable to join the network"?
restart ipad
http://support.apple.com/kb/HT1430
if that don't help pull the plug of the router for 30sec and connect it again -
HT1695 I can't connect my Ipad2 to my home wifi it says "unable to join rge network"
I can't connect my Ipad2 to my home wifi it says "unable to join rge network" eventhought my Iphone and MacBook are connected!!!
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Macbook air unable to join wifi network
I have a brand new MacBook Air and am new to Macs, but have a very good understanding of PCs. I constantly have to reenter our wireless security code for Wi-fi. Now I am receiving a message that says "the computer was unable to join the wi-fi network you selected". What am I doing wrong?
After a 30 minute phone call with Support, nothing worked still! In the end he suggested changing the channel of the wireless router/modem. I tried to do this (after research online on my imac) and then lost all internet connection. The router/moden no longer worked at all! Then had to call the support line for the router; spent another hour or so trying things, but to no avail. In the end have had to buy a new modern modem router (Belkin Dual band N+ PLAY N600 DB) and so far ......................it's working! But we only bought it this morning. Will report back another day with an update!
-
Transaction failed for unknown reason (100) Unable to complete backup at this time. Does anyone know how to solve this issue?
Thanks.The system is set up to backup files to the iCloud at the end of the day. This has ot happen for sometime now and the mesaage I get is the back up error.
-
I recently bought a new laptop and installed itunes. I was trying to sychronize my ipad and iphone, but it seems that the itunes was unable to recognize the devices. Can you tell me how I can solve this problem?
how new is the Notebook ?
Also double check your firewalls and virus protection that they are not blocking any ports also make sure you are plugging in the fastest USB -
When starting a rental movie, I get the message: "An error occured loading this content, please try again later". Any ideas how to solve this issue?
Firstly, I should have typed speedtest.net previously.
Now that's an interesting comment you make, out of interest do you have any purchased HD movies in your iTunes collection, if so, do they play on the Apple TV with your new tv. -
I'm not able to enrol in a iOS developer program as individual. My browser says too many redirects. I'm using the Safari Browser. Please let me know how to solve this issue.
Further to my earlier post, I have just read an entry noting that if you already own a domain name, and ask your hosting service to forward and mask your iWeb '08 created, web.mac.com site to your personal domain, chances are that due to the masking of the site on web.mac.com, Safari browsers interpret the masking as being the end of the site, and as such, just return a blank page?
This may explain the problem. However, call me old fashioned, and possibly a little naive, but surely this cannot be the problem?? It's OK in Firefox! -
Hello, icloud receive messages from gilly hicks, but does not receive messages from another personal account... this is happening me since one week and i dont know how to solve this.... error in the mail delivery system says not valid IPv4
SMTP error from remote mail server after RCPT TO:<[email protected]>:
host mx6.me.com.akadns.net [17.158.8.114]: 550 5.7.0 Blocked - see https://support.proofpoint.com/dnsbl-lookup.cgi?ip=184.173.9.56:
[email protected]
i do alse receive from gmail....
please help... what is happening!!!!Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app. I am certain other applications also need this information. Although lengthy, I could not find a more comprehensive place to retrieve this information. Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution! -
Can't watch video on CNN with IPAD after installation IOS 6 any tip to solve how to solve this issue.
Thanks for your support in advanceI have a few TV type Apps that are doing the same think since the IOS6 update . I figure the problem is at there end and there will be an update from them soon.
-
HT6001 "BtITunes PlugIn Dll has stopped working" How to solve that issue Pls?
BtITunes PlugIn Dll has stopped working
how to solve that issue plsThe following document might be worth a try:
iTunes: Troubleshooting issues with third-party iTunes plug-ins
Maybe you are looking for
-
Using set/get parameters or export/import in BSP.
Hi All, Is it possible to use set/get or export/import in BSP? We need to set/export some variables from a BADI and get/ import them in the BSP application. Code snippet will be of great help.. Thanks, Anubhav
-
Only sound, when I export HDV project with Quicktime
I'm working with Final Cut Pro 5.0 (yes I know I have to upgrade) with material from HV 20. When I export my finished project with the export to Quicktime opt. I can't watch the movie in Quicktime player, Itunes, VLC or MPEG Streamclip, only in FCP.
-
Httpd access_log entry - have I been compromised?
What's going on here? Has my security has been breached? Has someone caused a buffer overflow and then put something on my machine? If so, how could they access my machine? My knowledge state: I do not have a in depth knowledge of security issues - o
-
Do I have to disclose all income?
I work very part time, like 20 hours a month and I do receive a W2/file taxes etc. We would qualify for a mortgage on just my husband's income without any issues. Do I need to disclose my income? Thanks!
-
hi, on my new mac 10.8.3 computer i cannot insert a disc becuase there is no opening. can someone help me?