How to specify a radio button as disabled in Net-UI
How do i specify a radio button to be disabled using the net-ui ??
i know i can do it in HTML using
<INPUT TYPE="RADIO" NAME="btn1" VALUE="today" DISABLED>
So what is the Net-UI equivalent to the same ? I could not find much information
in the workshop documentation pertaining to the same
I have my radio button set up as
<netui:radioButtonGroup dataSource="{actionForm.itemSelected}" >
<netui:radioButtonOption value="{pageContext.itemNumber}" labelStyle="right"
>
</netui:radioButtonOption>
how do I specify a disabled property ??? I presume it can be done using labelStyle
but I dont know what to write in it .
Help !! MayDay !! MayDay !!
Thanks
Kar
</netui:radioButtonGroup>
Kar,
The netui:radioButtonOption does not have a disabled attribute. I think your
only option is to use javascript to set disabled to true.
- john
"kar piyush" <[email protected]> wrote in message
news:4087ec3e$[email protected]..
>
How do i specify a radio button to be disabled using the net-ui ??
i know i can do it in HTML using
<INPUT TYPE="RADIO" NAME="btn1" VALUE="today" DISABLED>
So what is the Net-UI equivalent to the same ? I could not find muchinformation
in the workshop documentation pertaining to the same
I have my radio button set up as
<netui:radioButtonGroup dataSource="{actionForm.itemSelected}" >
<netui:radioButtonOption value="{pageContext.itemNumber}"labelStyle="right"
>>
</netui:radioButtonOption>
how do I specify a disabled property ??? I presume it can be done usinglabelStyle
but I dont know what to write in it .
Help !! MayDay !! MayDay !!
Thanks
Kar
</netui:radioButtonGroup>
Similar Messages
-
How to use a radio button in enabling/disabling a text box in report progra
Hi,
Could any please let me know, how to use a radio button in enabling/disabling a text box in report program.*& Report ZMR_RADIO_BUTTONS
REPORT ZMR_RADIO_BUTTONS.
PARAMETERS : R1 RADIOBUTTON GROUP G1,
R2 RADIOBUTTON GROUP G1.
PARAMETERS : A1 TYPE I,
A2 TYPE I.
AT SELECTION-SCREEN OUTPUT.
*initialization.
IF R1 = 'X'.
LOOP AT SCREEN.
IF SCREEN-NAME = 'A1'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
ENDIF.
IF SCREEN-NAME = 'A2'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 1.
ENDIF.
ENDLOOP.
ENDIF.
IF R2 = 'X'.
LOOP AT SCREEN.
IF SCREEN-NAME = 'A1'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 1.
ENDIF.
IF SCREEN-NAME = 'A2'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
ENDIF.
modify screen.
ENDLOOP.
ENDIF.
START-OF-SELECTION.
*IF R1 = 'X'.
*LOOP AT SCREEN.
IF SCREEN-NAME = 'A1'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 1.
ENDIF.
*ENDLOOP.
*ENDIF.
*IF R2 = 'X'.
*LOOP AT SCREEN.
IF SCREEN-NAME = 'A2'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
ENDIF.
*ENDLOOP.
*ENDIF. -
How to create a radio button on OA Page using Personalization
I am trying to create a radio button on OA Page using Personalization. The item style , I can see is Message Radio Group.
How to create Message Radio Button and bring them under one group.
ThanksYou should use jdev to define a radiogroup and radio buttons under that, wrap that definition inside a stackLayout in jdev, use personalization to add a stackLayout and extend the region which you had created earlier in jdev.
-
How to create a radio button in ALV Reports
Hi all,
Best wishes to all..
Kindly reply me to this question... that is "How to create a radio button in ALV Report"
Thanks and Regards
AnjaliHI
here is an example :
PROGRAM ZUS_SDN_BCALV_GRID_DEMO_2.
Based on: BCALV_GRID_DEMO.
TYPE-POOLS: icon.
TYPES: BEGIN OF ty_s_sflight.
INCLUDE TYPE sflight.
TYPES: button1 TYPE lvc_emphsz.
TYPES: button2 TYPE lvc_emphsz.
TYPES: button3 TYPE lvc_emphsz.
TYPES: button4 TYPE lvc_emphsz.
TYPES: END OF ty_s_sflight.
DATA:
gt_sflight TYPE STANDARD TABLE OF ty_s_sflight,
gt_fcat TYPE lvc_t_fcat.
DATA: ok_code LIKE sy-ucomm,
gt_sflight TYPE TABLE OF sflight,
g_container TYPE scrfname VALUE 'BCALV_GRID_DEMO_0100_CONT1',
grid1 TYPE REF TO cl_gui_alv_grid,
g_custom_container TYPE REF TO cl_gui_custom_container.
CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
CLASS-DATA:
md_cnt TYPE i.
CLASS-METHODS:
handle_hotspot_click FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING
e_row_id
e_column_id
es_row_no
sender.
ENDCLASS. "lcl_eventhandler DEFINITION
CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_hotspot_click.
define local data
FIELD-SYMBOLS:
<ls_entry> TYPE ty_s_sflight,
<ld_fld> TYPE ANY.
READ TABLE gt_sflight ASSIGNING <ls_entry> INDEX es_row_no-row_id.
CHECK ( <ls_entry> IS ASSIGNED ).
Set all radio buttons "unselected"
<ls_entry>-button1 = icon_wd_radio_button_empty.
<ls_entry>-button2 = icon_wd_radio_button_empty.
<ls_entry>-button3 = icon_wd_radio_button_empty.
<ls_entry>-button4 = icon_wd_radio_button_empty.
ASSIGN COMPONENT e_column_id-fieldname OF STRUCTURE <ls_entry>
TO <ld_fld>.
IF ( <ld_fld> IS ASSIGNED ).
Set selected radio button "selected".
<ld_fld> = icon_wd_radio_button.
ENDIF.
Force PAI followed by refresh of table display in PBO
CALL METHOD cl_gui_cfw=>set_new_ok_code
EXPORTING
new_code = 'DUMMY'
IMPORTING
RC =
ENDMETHOD. "handle_hotspot_click
ENDCLASS. "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
MAIN *
PERFORM select_data.
CALL SCREEN 100.
MODULE PBO OUTPUT *
MODULE pbo OUTPUT.
SET PF-STATUS 'MAIN100'.
IF g_custom_container IS INITIAL.
CREATE OBJECT g_custom_container
EXPORTING container_name = g_container.
CREATE OBJECT grid1
EXPORTING i_parent = g_custom_container.
PERFORM build_fieldcatalog.
CALL METHOD grid1->set_table_for_first_display
EXPORTING
i_structure_name = 'SFLIGHT'
CHANGING
it_fieldcatalog = gt_fcat
it_outtab = gt_sflight.
Set event handler for event TOOLBAR
SET HANDLER:
lcl_eventhandler=>handle_hotspot_click FOR grid1.
else.
CALL METHOD grid1->refresh_table_display
EXPORTING
IS_STABLE =
I_SOFT_REFRESH =
EXCEPTIONS
FINISHED = 1
others = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDMODULE. "PBO OUTPUT
MODULE PAI INPUT *
MODULE pai INPUT.
to react on oi_custom_events:
CALL METHOD cl_gui_cfw=>dispatch.
CASE ok_code.
WHEN 'EXIT'.
PERFORM exit_program.
WHEN OTHERS.
do nothing
ENDCASE.
CLEAR ok_code.
ENDMODULE. "PAI INPUT
FORM EXIT_PROGRAM *
FORM exit_program.
CALL METHOD G_CUSTOM_CONTAINER->FREE.
CALL METHOD CL_GUI_CFW=>FLUSH.
LEAVE PROGRAM.
ENDFORM. "EXIT_PROGRAM
*& Form BUILD_FIELDCATALOG
text
--> p1 text
<-- p2 text
FORM build_fieldcatalog .
define local data
DATA:
ls_fcat TYPE lvc_s_fcat,
ls_hype TYPE lvc_s_hype.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_BUFFER_ACTIVE =
i_structure_name = 'LVC_S_FCAT'
I_CLIENT_NEVER_DISPLAY = 'X'
I_BYPASSING_BUFFER =
I_INTERNAL_TABNAME =
CHANGING
ct_fieldcat = gt_fcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
DELETE gt_fcat WHERE ( fieldname <> 'EMPHASIZE' ).
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_BUFFER_ACTIVE =
i_structure_name = 'SFLIGHT'
I_CLIENT_NEVER_DISPLAY = 'X'
I_BYPASSING_BUFFER =
I_INTERNAL_TABNAME =
CHANGING
ct_fieldcat = gt_fcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE gt_fcat INTO ls_fcat
WITH KEY fieldname = 'EMPHASIZE'.
IF ( syst-subrc = 0 ).
DELETE gt_fcat INDEX syst-tabix.
ENDIF.
ls_fcat-fieldname = 'BUTTON4'.
ls_fcat-icon = 'X'.
ls_fcat-hotspot = 'X'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
ls_fcat-fieldname = 'BUTTON3'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
ls_fcat-fieldname = 'BUTTON2'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
ls_fcat-fieldname = 'BUTTON1'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
LOOP AT gt_fcat INTO ls_fcat.
ls_fcat-col_pos = syst-tabix.
MODIFY gt_fcat FROM ls_fcat INDEX syst-tabix.
ENDLOOP.
ENDFORM. " BUILD_FIELDCATALOG
*& Form SELECT_DATA
text
--> p1 text
<-- p2 text
FORM select_data .
define local data
DATA:
ls_sflight TYPE ty_s_sflight.
SELECT * FROM sflight INTO CORRESPONDING FIELDS OF TABLE gt_sflight.
ls_sflight-button1 = icon_wd_radio_button.
ls_sflight-button2 = icon_wd_radio_button_empty.
ls_sflight-button3 = icon_wd_radio_button_empty.
ls_sflight-button4 = icon_wd_radio_button_empty.
MODIFY gt_sflight FROM ls_sflight
TRANSPORTING button1 button2 button3 button4
WHERE ( carrid IS NOT INITIAL ).
ENDFORM. " SELECT_DATA
Regards,
Prasanth
Reward all helpful answers -
How can i get Radio buttons and parameters in a Single Straight Line
Hi Experts,
How can i get Radio buttons and parameters in a Single Straight Line...
Example:
r1 r2 p1 p2.....
Cheers,
Priya
Points granted.Write the following code for the selection screen:
DECLARATION OF PARAMETERS.
SELECTION-SCREEN: BEGIN OF BLOCK select WITH FRAME TITLE text-001,
BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(10) FOR FIELD p_detail.
PARAMETERS p_detail RADIOBUTTON GROUP r1 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 25(10) FOR FIELD p_summry.
PARAMETERS p_summry RADIOBUTTON GROUP r1.
SELECTION-SCREEN: END OF LINE,
END OF BLOCK select.
this will solve your poblem surly. reward the points if you find helpful
Regards,
Siddarth -
How to create a radio button in dynpro during runtime?
Hi guys!
How can i create radio buttons in dynpro during runtime??
any ideas?
thanks!!Hi Thomas,
I think as of now there is no possibility to create a Radio Button Dynamically during runtime. But of course, there is a work around which I feel you can evaluate.
If your business requirement demands that you need to have a Radiobutton, you can use the subscreen to place the Radiobutton and later based on your need you can call that screen to enable that button to the user and to make it available.
Hope this will help.
Thanks,
Samantak. -
How to Create a Radio Buttons using Personlization
Hi friends ,
We have requierment like , Wanted to havev two radio buttons Employee Relative : YES or NO values.
These radio buttons I wanted to add on Oracle Provided page using personlization. But the Values for the radio buttons should be YES and another button is No.
After addin it , we shall have this selected value handled in Custom Controller. How can I the radio Buttons with the above YES/No Values. Any guidelines would be greatly helpful.
Thanks Guys
Regards
RaghuHi,
Using personalization you can create radio button s, the item style as: Message Radio Button
and then extend the controller and use the below code in processrequest of the extended or custom controller:
OAMessageRadioButtonBean appleButton =
(OAMessageRadioButtonBean)webBean.findChildRecursive("GroupButtonOne"); //First Radio Button
appleButton.setName("Yes");
appleButton.setValue("Yes");
OAMessageRadioButtonBean orangeButton =
(OAMessageRadioButtonBean)webBean.findChildRecursive("GroupButtonTwo"); //Second Radio Button
orangeButton.setName("No");
orangeButton.setValue("No");
May be it will help you.
Regards
Mahesh -
How to deselect the Radio button from htmlb.table.TableView
Hi Experts,
Could you please help me, how to seselect the Radio button from htmlb.table.TableView?
<hbj:tableView
id="tbvCustomer"
model="mcBean.csModel"
design="ALTERNATING"
headerVisible="TRUE"
footerVisible="TRUE"
navigationMode="BYPAGE"
selectionMode="SINGLESELECT"
fillUpEmptyRows="FALSE"
headerText="Searchresults"
visibleRowCount="10"
onNavigate="CustomerSearchNavigate"
visibleFirstRow="<%=mcBean.getCsVisibleFirstRow() %>">
Problem: After searching and selecting the Customer in the table, then again we are searching for another customer. After that the searched customer is displaying in the Table. By default the table Radio button is selected. Because for first Customer we have selected the Radio button. How we can deselect the FRadio button while searching for another Customer.
Thanks In Advance.
Regards,
Vijay.I think it is <2095>.
In SmartForms, go to your text window.
Use the icon on the top left of the text window to switch to the old editor.
INSERT -> CHARACTERS -> SAP ICONS.
Do a FIND on "radio". It's called ICON_WD_RADIO_BUTTON_EMPTY. -
How to Create a radio button?
How to Create a radio button with the label Maintenance of RSDDTREXHPAFAIL tab".Once the user chooses this then there will two options
Create and Delete.Table has three fields.When user chooses the create button then it should create a new entry and delete should delete an entry. If the entry exist then create should overwrite an entry. There is no update.hi...
the sample code below should help you .....
parameters:Maintenance of RSDDTREXHPAFAIL tab radiobutton group grp1.
this will create the radio button on the screen with the lable required.
now in the user command of the screen ..
PROCESS AFTER INPUT.
MODULE user_command_0100.
MODULE user_command_0100 INPUT.
*assigning the sy-ucomm value to ok_code
ok_code= sy-ucomm.
*clear the sy-ucomm
CLEAR sy-ucomm.
CASE ok_code.
*when user presses CREATE button
WHEN 'PB_CREATE'.
if Maintenance of RSDDTREXHPAFAIL tab = 'X'.
here write query to fetch data into the internal table
and then use modify command to modify the database.
endif.
*when user presses CHANGE button
WHEN 'PB_DELETE'.
if Maintenance of RSDDTREXHPAFAIL tab = 'X'.
HERE write the delete query.
endif.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
<b>plz reward pts if helpful.</b>
regards
vijay -
How to select a radio button using javascript?
Hi,
I have 2 radio buttons as shown below:
<input id="poBoxRadio" name="poBoxRadio" type="radio" class="radio-btn" value="No" /> No
<input id="poBoxRadio" name="poBoxRadio" type="radio" class="radio-btn" value="Yes" /> YesI want to select one of this radio button, according to the following condition in javascript:
<script type="text/javascript">
if (<%=option1%> != ""){
// Radiobutton "No" should be selected.
else if (<%=option2%> != ""){
// Radiobutton "Yes" should be selected.
</script>How can I do this in Javascript? Any help will be highly appreciated.
Thanks,
RishiI have solved this issue using the following:
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
<html>
<head>
<title></title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<script type="text/javascript">
var a='', b='d';
</script>
</head>
<body>
<input id="poBoxRadioNo" name="poBoxRadio" type="radio" class="radio-btn" value="No" /> No
<input id="poBoxRadioYes" name="poBoxRadio" type="radio" class="radio-btn" value="Yes" /> Yes
<script type="text/javascript" defer="defer">
<!--
if(document.getElementById){
if (a != ""){
// Radiobutton "No" should be selected.
document.getElementById('poBoxRadioYes').checked = false;
document.getElementById('poBoxRadioNo').checked = true;
else if (b != ""){
// Radiobutton "Yes" should be selected.
document.getElementById('poBoxRadioNo').checked = false;
document.getElementById('poBoxRadioYes').checked = true;
// -->
</script>
<input disabled type="button" value="UP" onclick="setVariable('move=1')">
</body>
</html>Thanks to all of you! -
How to differentiate between Radio Buttons with the same name?
My form has two fields, to which I gave the same name ("Radio Button 1.0") in order to achieve mutual exclusivity.
Now, I would like to use JavaScript to retrieve the value of one the two fields:
var checkMark = this.getField("Radio Button1.0");
if (checkMark.value == "Yes") {
Questions:
What is the proper way to inspect the value of a Radio Button? I have tried this:
if (checkMark.value == "No") [...]
but it doesn't seem to work.
How can I tell apart 2 radio buttons with the same name?
TIA,
-RFHWhen Radio Buttons and Check Boxes are unchecked their value is "Off", so if you have "Yes", "No" buttons you will also encounter an 'Off" value. Now if you want to look at a given button, you will have to use the "isBoxChecked(nWidget)" method.
nWidget:
The 0-based index of an individual radiobutton or checkbox widget for this field. The index is determined by the order in which the individual widgets of this field were created (and is unaffected by tab-order).
Every entry in the Fields panel has a suffix giving this index, for example MyField #0.
Returns
true if the specified widget is currently checked, false otherwise.
Example
var f = this.getField("ChkBox");
if(f.isBoxChecked(0))
app.alert("The Box is Checked");
else
app.alert("The Box is not Checked"); -
How do I make Radio Button label clickable?
In just plain HTML, the following code will allow me to click on the radio button label text to select that radio button:
<label for="radio1">Radio Button label</label>
<input type="radio" value="Selected" id="radio1" />
How can I do the same thing using HTMLB?
<htmlb:radioButton id = "buttonAll"
text = "All"
key = "ALL"
tooltip = "View All" />
Wrapping the htmlb:radioButton with a <label></label> does not work - any ideas?Hi Lisa,
You have to also add the <b>disable</b> attribute to the following code. This is because, <i>if the radioButton is disabled it is not selectable.</i>
Replace the code with:
<htmlb:radioButton id = "buttonAll"
text = "All"
key = "ALL"
tooltip = "View All"
disabled="false"
/>
I would also suggest you to wrap the htmlb:radioButton code in <htmlb:radioButtonGroup></htmlb:radioButtonGroup>
Hope this Solves your problem.
Regards
Pravesh -
Using a Radio Button to Disable Multiple Checkboxes
Hi everyone,
My name is Christian and I am trying to design a form using Adobe Designer 7 that when a user selects a group of two radio buttons (one marked Macintosh and one marked Windows) it automatically disables 3 or 4 checkboxes of various software applications further down the page.
The idea is if you select the Windows radio button, you would not be able to select the iWorks or StuffIT checkboxes (as that is Mac software), but conversely if you check Macintosh radio button the iWorks and StuffIT checkboxes activate but the Office 2003 and Microsoft Money checkboxes deactivate (because that is Windows software).
Im not really a developer so any assistance would be appreciated. Thanks for reading and have a great day! :-)
ChristianI suspect that you have a problem in some portion of your code that you have not posted. To help debugging I suggest you create a simple test using two pages: input.cfm and action.cfm. Get the most simple case working then add the javascript, css, and CF code to make your application work.
<!--- contents of input.cfm --->
<html>
<head>
<title>Input</title>
</head>
<body>
<form action="action.cfm" method="POST">
Choose type: <br />
<input name="type" type="radio" value="male" /> Male<br />
<input name="type" type="radio" value="female" /> Female<br />
<input type="submit" />
</form>
</body>
</html>
<!--- content of action.cfm --->
<html>
<head>
<title>Action</title>
</head>
<body>
<cfif form.type eq "male">
Type is male.
<cfelseif form.type eq "female">
Type is female.
</cfif>
Here is a cfdump of the form variables:<br />
<cfdump var="#form#" />
</body>
</html>
Message was edited by: JR "Bob" Dobbs
Added sample for action.cfm -
How to link a radio button selection to a submit destination ?
Hi,
I am working on a JSP page. Depending on the check from a radio button on a form, the form will be submitted to a different destination. Does anyone know how to do that? Any code samples?
Thanks!
wypThis will give you an idea of how it works. Save the file and double click on it to open in IE.
<html>
<head></head>
<body>
<form name="myForm" method="GET" action="servlet/InsertRecords">
<P>
<INPUT TYPE="RADIO" NAME="Radio1" VALUE="1" onClick="onClickFunction(1)" >Insert Record
<BR>
<INPUT TYPE="RADIO" NAME="Radio1" VALUE="2" onClick="onClickFunction(2)" >Delete Record
<BR>
</P>
</form>
</body>
<Script Language="JavaScript">
function onClickFunction(inVar) {
if (inVar == 1) { document.myForm.action="servlet/InsertRecords";
document.myForm.submit(); }
if (inVar == 2) { document.myForm.action="servlet/DeleteRecords";
document.myForm.submit(); }
</script>
</html> -
How to create a radio button that changes colors
I'm using Acrobat X and ID CS5 on Mac OS X.
A couple of years ago someone on the forums explained to me how to create a button that changes color with each click. You can view a sample PDF at https://dl.dropboxusercontent.com/u/52882455/colorcycle.pdf. They gave me the document JS and showed me how to set the properties of the button. I've integrated the button into a particular series of PDF forms and it's worked out very well.
Now I would like to do the same thing, but using a circle instead of a square. Can anyone tell me the best way to do this? Can I somehow set a radio button to cycle through colors in the same way? I design my forms initially in ID CS5 and then activate and format the fields in Acrobat X. I've tried using circles instead of squares in my ID document, but when I export to an interactive PDF, they're converted to squares.
Any ideas?I understand how to make buttons cycle through colors-- the problem I'm having is that I'm trying to figure out how to make a circular button cycle through colors. When I export my ID document to PDF, my round button maintains it's original appearance, but when I click on it to cycle through the colors, it behaves like a square (see new PDF at https://dl.dropboxusercontent.com/u/52882455/colorcycle2.pdf).
If I use a radio button, I can get it to cycle through colors, but I don't want it to have a black dot in the middle. Is there a way to format the radio button to not show the black dot when clicked?
Maybe you are looking for
-
Apache, iPrint and SSL/nile.nlm
Hi, Getting various abends on a daily basis. Server is running as a vm on ESX 4.1 on an AMD platform. The running process is not always the same (apache_workprocess, seg.nlm, pcountdp.nlm) but the type of abend seems to be very consistent. It is the
-
Problems with new MacBook Pro when using Front Row
I posted this in the MacBook Pro forum, but someone suggested I post it here, so here goes... I just picked up a new 15" MacBook Pro 2.4 last night. I was very excited, as I've wanted one for a while now, but when I tried to watch a dvd in Front Row
-
Php/mySQL error after updating
I updated my Mac last week from Leopard 10.5.8 to Snow Leopard 10.6.2 After the update I am now unable to run local connections to the mySQL server I have running on my Mac. I now get this type of error: +Warning: mysql_pconnect() [function.mysql-pco
-
Hi Guys, I know we can post incoming payments from F110 for a customer. I am not sure how we decide customer has paid how much amount so as to clear the invoices. Is scheduled incoming payment for the hou
-
Searching Eclipse-Plugin for EL
Hi @all! I wanna try to write an application with EL. Actually I'm using Eclipse 2.1.1. and I'm using the Lomboz-Plugin for creating JSP-pages by Java-Code. But I've noticed this Plugin is not able to know EL. In kind of errors, no corrections will b