How to spilt files when using DATA UNLOAD (External Table, 10g)?

Hi,
I am runnin 10gR2 and need to export partitions by using data_pump driver
via dmp files (External Tables).
Now as requierment the created files can not exceed 2GB mark.
Some of partitions are larger than that.
How could I split the partition so I could be able to create files smaller than 2GB? Is there any parameter I am not aware of or do I need to do SELECT COUNT(*) FROM source_table PARTITION(partiton_01);
and than to work with ROWNUM?
This example working fine for all partitions samller than 2GB:
CREATE TABLE partiton_01_tbl
2 ORGANIZATION EXTERNAL
3 (
4 TYPE ORACLE_DATAPUMP
5 DEFAULT DIRECTORY def_dir1
6 LOCATION ('inv_xt1.dmp')
7 )
8 PARALLEL 3
9 AS SELECT * FROM source_table PARTITION(partiton_01);

You could specify multiple destination files in the LOCATION parameter (the number of files should match the degree of parallelism specified). I am not aware of an option that would allow the external table to automatically add new data files as the partition size increased, so you'd likely have to do some sort computation about the expected size of the dump file in order to figure out how many files to create.
Justin

Similar Messages

  • Saving PS CS3 files when used as an external editor

    When I open an image through aperature with PS as the external editor it makes a copy of my image and saves it in my library when Im done in PS which is great, but when I take that same PS edited file, open it back up in PS and attempt to save another PS version of it in the aperature library with the "Save as" command it does not show up in my library anywhere. If I go to the aperature library folder I can find my additional saved PS images in the correct library folder, but they do not show up in aperature.
    Does anyone know a way to be able to save additional PS files in the aperature library?
    Thanks!!

    Thanks for the help. Only problem still is that if I do it that way and import the edited saved Tif or PSD file back into aperature my PS layers and settings are erased when I try to reopen that PS file with the external editor through aperature. Unlike the original image duplicated in aperature when using PS as the external editor which I can continue to open and reopen from within aperature and be able to access all my saved PS layers, mask, adjustments, etc.
    Sorry if this isnt making any sense

  • Where can I find the file name used by a External Table

    I need to run a SQL to retrive the file name that a External Table points to.

    take a look at dba_external_locations

  • Adobe Premiere CC 2014.2: losing rendered files when using warp stabilizer

    Hi,
    I am constantly losing rendered files when using the warp stabilizer. So far I have tried about every hint I could find on the web such as cleaning the cache, rebuilding the rendered files, creating additional sequences etc etc.
    Honestly I am getting tired of using a product that isnt cheap in the first place to rent and where a bug like this apparently persists over several product versions without being fully fixed (I have had this problem throughout 2014 but according to forum postings others seem to have problems with much earlier versions as well).
    I would be really grateful if somebofy has any suggestion how this can be addressed.
    I am also happy to help testing fixes - if there are any fixes available.
    Thanks a lot and Happy New Year!
    Martin

    Hi Catherine,
    Welcome to the Adobe forums.
    Please try the steps mentioned below and check if it works for you.
    1. Launch Premiere Pro and create a Project, go to File menu>Project Settings>Renderer and change the Renderer to Software only mode, delete previews if you get a prompt and then try to import the clip.
    2. If step 1 fails or the Renderer is already on Software only mode, go to Start Menu and search for Device Manager, go into Display Adapters and Right click on the Graphics card to select Update driver software option, on the next screen choose "Browse my computer for driver software", then choose "Let me Pick from a list..." option and from the list select "Standard VGA Graphics adapters. You might need to change the screen resolution of your screen and once done restart the machine again.
    Launch Premiere Pro and import the clip to check.
    Regards,
    Vinay

  • How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tri

    How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tried to reopen and now it won't work. I am using Adobe InDesign CS5. It is the only version on my comp. I have tried opening on another comp & copying the file – same error comes up. PLEASE HELP

    First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
    You can find it here:
    [Ann] Identify Your InDesign File
    If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
    In regards of the script showing a result for InDesign files higher than CS6:
    CS7 = CC v9
    CS8 = CC v10 = CC-2014 or CC2014.1
    Uwe

  • Firefox 33 doesn't display a pdf file when using the response object

    Firefox 33.0.2 does not display pdf files when using the code below from an asp.net program, which works for previous versions of Firefox, and also works with IE. I'm using the built-in pdf viewer. All of my plugins are disabled.
    Dim strPDF As String
    strPDF = Session("filname") 'pdf filename
    Response.Clear()
    Response.ClearHeaders()
    Response.Buffer = True
    Response.ContentType = "application/pdf"
    Response.CacheControl = "Private"
    Response.AddHeader("Pragma", "no-cache")
    Response.AddHeader("Expires", "0")
    Response.AddHeader("Cache-Control", "no-store, no-cache, must-revalidate")
    Response.AddHeader("Content-Disposition", "inline; filename=" + strPDF)
    Response.WriteFile(strPDF)
    Response.Flush()
    Response.Close()
    Response.Clear()
    Response.End()
    Session("filname") = ""

    Thanks cor-el. You pointed me in the right direction. It appears to me that a reported Firefox 33 bug with the handling of compression (Transfer-Encoding: chunked) is the culprit (https://support.mozilla.org/en-US/questions/1026743). I was able to find a work-around by specifying the file size and buffering. Below is my code, with some code from http://www.codeproject.com/Questions/440054/How-to-Open-any-file-in-new-browser-tab-using-ASP.
    Dim strPDF As String
    strPDF = Session("filname") 'pdf filename
    Dim User As New WebClient()
    Dim FileBuffer As [Byte]() = User.DownloadData(strPDF)
    If Not (FileBuffer Is Nothing) Then
    Response.Clear()
    Response.ClearHeaders()
    Response.CacheControl = "Private"
    Response.AddHeader("Pragma", "no-cache")
    Response.AddHeader("Expires", "0")
    Response.AddHeader("Cache-Control", "no-store, no-cache, must-revalidate")
    Response.ContentType = "application/pdf"
    Response.AddHeader("content-length", FileBuffer.Length.ToString())
    Response.BinaryWrite(FileBuffer)
    Response.Flush()
    Response.Close()
    Response.Clear()
    Response.End()
    End If
    Session("filname") = ""

  • How to disply the input text box when the data in the table is empty

    Hi,
    I m using JDeveloper 11g 5.1.1.1 : How to display the Input text box when the data in the table is empty or by using the dual table.
    Since there is no record in the table, screen is displying only the lable. not displying the Input text box.? Any property is there to enable?.
    One more case i tried by using dual (eg Select '0' as name from dual) created one view object and dragged in the JSF screen as input combo box with list of values.
    In this case also it is not displaying the combo box.Just displaying the Lable name and 0 only.
    Regards
    Bijesh K

    Hi,
    I didn,t get you.Could you please explain. I am not choosing the ADF table. Selecting and dragging ADF form only.
    Regards
    Bijesh K

  • Error when using data postion delay

    I obtained this error when using data position delay. Can anyone please
    tell me the reason why I can not configure the delay to be between 0.7
    and 0.8.
    Possible reason(s):
    Driver Status:  (Hex 0xBFFA403F) Unable to configure requested delay property given the current clock rate.
    Ensure that the delay value specified is within the valid range for the
    frequency specified or do not configure property for delay operation.
    Device: PXI1Slot2
    Property: Data Position
    Sample Rate: 40000000.0
    Requested Value: 0.71875
    Supported Values: 0.000 through 0.200, 0.300 through 0.700, 0.800 through 1.000,
    Status Code: -219401

    Timothy,
    The 656x devices have a limit on the available data delay values based
    on frequency.  Between 25MHz and 50MHz there are "holes" in the
    available delay range.  Above 50MHz, the full 0 to 1 data delay is
    valid.  If you look in the specifications installed with NI HSDIO
    for the NI 656x, on page 7, Figure 1, there is an illustration showing
    how to compute what the valid range is for the frequency of interest.
    For example, at 40MHz, valid values are:
    0 to 0.2
    0.3 to 0.7
    0.8 to 1
    In the error message posted below, you tried to input a value of 0.71875 which is not within these ranges.

  • ORA-03297: file contains used data beyond requested RESIZE value

    DB 10.2.0.4
    AIX 5.2
    PROD
    I have dropped many big tables after moving on another database, what i thought it will free the space of the disk because right now there is no provision to extend the disk size and disk size have already occupied 90%. I dropped tables which had 150 GB total size but when i am trying to resize the datafiles it is giving below error whereas that datafile has free space ( example: free space 8000mb and total size 20000mb of that file i tried to resize it to 14000mb it is giving below error)
    I tired the same for many datafiles for a particular tablespace all datafiles are giving same error except one of them.
    ERROR at line 1:
    ORA-03297: file contains used data beyond requested RESIZE value
    Thanks

    user13382934 wrote:
    DB 10.2.0.4
    AIX 5.2
    PROD
    I have dropped many big tables after moving on another database, what i thought it will free the space of the disk because right now there is no provision to extend the disk size and disk size have already occupied 90%. I dropped tables which had 150 GB total size but when i am trying to resize the datafiles it is giving below error whereas that datafile has free space ( example: free space 8000mb and total size 20000mb of that file i tried to resize it to 14000mb it is giving below error)
    I tired the same for many datafiles for a particular tablespace all datafiles are giving same error except one of them.
    ERROR at line 1:
    ORA-03297: file contains used data beyond requested RESIZE value
    ThanksThis error occurs when some object has blocks "adjacent" to the High Water Mark.
    In order to RESIZE, the object needs to be identified & then moved;
    preferably to a different tablespace.
    After do so you can RESIZE at least a modest amount.

  • ORA-3297:file contains used data beyond requested resize value.

    Hi All,
    I am trying to rezise a datafile and getting the ORA-3297 error.
    From the dynamic views i verified that there is more than 10GB of freespace in INDEX_TB tablesapce which contains only one datafile whose present size is > 19 GB
    alter database datafile '/data/oracle/oradata/testdb/INDEX_TB.dbf' resize 17G;
    ORA-3297:file contains used data beyond requested resize value.Oracle 10.1.0 on AIX 5.3
    Details are below,
    tablespace_name:INDEX_TB
    size_mb:19797.84375
    free_mb:11947
    free%:60.34495549546904571362727317210996778374
    How do i find the high water mark of the datafile?
    ~Thanks

    Thank you all for the comments.
    Here i got an odd situation. According to the dynamic views there are 56 or 60 % are free in DATA_TB & INDEX_TB tablespace.
    But sql from Doc 130866.1 gives the output as below. I tried coalesce tablespace but no effect.
    Tablespace: DATA_TB Datafile:
    /data/oracle/oradata/testdb/DATA_TB.dbf
    Can not be resized, no free space at end of file.
    Tablespace: DATA_TB Datafile:
    /data/oracle/oradata/testdb/DATA_TB02.dbf
    Can not be resized, no free space at end of file.
    Tablespace: INDEX_TB Datafile:
    /data/oracle/oradata/testdb/INDEX_TB.dbf
    Can not be resized, no free space at end of file.
    ~Thanks

  • How to get group when the data source from system instead of UME database

    Hig guys,
    How to get group when the data source comes from backend system instead of UME database?
    I tried to use
    IUMPrincipal RefGroup = WPUMFactory.getGroupFactory().getGroup(groupName);
    But I was not able to get the group. But in "UserAdministrator", I can find this groupName.
    Which kind of API can I use?
    Thanks in advance!
    Regards,
    Liying
    Message was edited by:
            Liying Wang

    Ok,
    try this:
    com.sapportals.portal.security.usermanagement.IGroupFactory ep5GroupFactory = userManagementService.getGroupFactory();
    IGroupFactory groupFactory = UMFactory.getGroupFactory();
    com.sap.security.api.IGroup group = groupFactory.getGroupByUniqueName(groupName);
    IUMPrincipal ep5Principal = ep5GroupFactory.getEP5Group(group);
    This should do the trick,
    Romano
    PS: and thanks for the stars!

  • Is there a capability to save/export the time capsule settings file when using the iphone/ipad airport utility. the "file" button does not exist on the latest airport utility app.

    is there a capability to save/export the new airport 2TB time capsule settings file when using the iphone/ipad airport utility. set-up wasn't a problem but the "file" button does not exist on the latest airport utility app v6.3 to save the configuration file.

    the "file" button does not exist on the latest airport utility app v6.3 to save the configuration file.
    Sounds like you are a bit confused with version numbers.
    Latest AirPort Utility version for the iPhone / iPad is 1.3.3.  There is no option or capability to export/import settings on the iOS version(s) of AirPort Utility.....although you could take a series of screen shots and save them for future reference.
    AirPort Utility 6.3.x is found on a Mac.....not on iPhone / iPad. Export and Import options are found under the File menu in 6.3.x.

  • How do I have itunes use/detect my external hard drive and place music on the external drive from the itunes store? There are no music files on my pc yet.  I will like to do this after installing itunes 11 on my pc for the first time. I am using windows 7

    How do I have itunes use/detect my external hard drive and place music on the external drive from the itunes store? There are no music files on my pc yet.  I will like to do this after installing itunes 11 on my pc for the first time. I am using windows 7.  HP computer intel Dual Core.  Thanks for any help!

    Hey idw3,
    Welcome to Apple Support Communities, and thanks for the question. Follow the instructions on this article to move your iTunes Media folder to an external hard drive:
    iTunes for Windows: Moving your iTunes Media folder
    http://support.apple.com/kb/HT1364
    Regards,
    David

  • How do we use Data rules/error table for source validation?

    How do we use Data rules/error table for source validation?
    We are using OWB repository 10.2.0.3.0 and OWB client 10.2.0.3.33. The Oracle version is 10 G (10.2.0.3.0). OWB is installed on Linux.
    I reviewed the posting
    Re: Using Data Rules
    Thanks for this forum.
    I want to apply data rules to source table/view and rule violated rows should go to defined error table. Here is an example.
    Table ProjectA
    Pro_ID Number(10)
    Project_name Varchar(50)
    Pro_date Date
    As per above posting, I created the table in object editor, created the data rule
    NAME_NOT_NULL (ie project name not null). I specified the shadow table name as ProjectA_ERR
    In mapping editor, I have projectA as source. I did not find error table name and defined data rules in table properties. It is not showing up the ERR group in source table
    How do we bring the defined data rules and error table into mapping?
    Are there any additional steps/process?
    Any idea ?
    Thanks in advance.
    RI

    Hi,
    Thanks for your reply/pointer. I reviewed the blog. It is interesting.
    What is the version of OWB used in this blog?
    After defining data rule/shadow table, I deployed the table via CC. It created a error table and created the all the source coulmns in alphabatical order. If I have the primary key as 1st coulmn (which does not start with 'A') in my source, it will apprear middle of of columns in error table.
    How do we prevent/workaround this?
    If I have source(view) in sch A, how do we create Error table in Sch B for source(view)?
    Is it feasible?
    I brought the error table details in mapping. Configured the data rules/error tables.
    If I picked up 'MOVE TO ERROR' option, I am getting "VLD-2802 Missing delete matching criteria in table. the condition is needed because the operator contain at least one data rule with a MOVE TO ERROR action"
    On condition Loading - I have 'All constraints' for matching criteria.
    I changed to "no constraints' still I get the above error.
    If I change to 'REPORT' option instead of 'MOVE TO ERROR' option, error goes off.
    Any idea?
    Thanks in advance.
    RI

  • What is a valid location for autorecovery files when using Word for MAC?

    What is a valid location for autorecovery files when using Word for MAC?

    Microsoft Word for Mac support forums is probably a better place to ask.

Maybe you are looking for

  • Base unit of measure values  not loading into the cube.

    HI Xperts, i have created a generic data source and in that i took unit as base_uom and one quantity keyfigure and in my cube i have taken 0base_uom and a quantity key figure infoobject. in transformation i mapped the  base_uom(source) to 0base_uom (

  • ITunes won't show library on external hard drive

    I have just bought a MacBook Pro but I don't know how to get library on external hard drive to show in iTunes...  Any suggestions please?

  • Unable to determine the sharedness of /dev/sda, /dev/sdb, /dev/sdc on nodes

    hello, pls how do i fix this issue, the two scripts ran on first node, but failed on second node, after running cluvfy this is the output: using cluvfy for storage requirements Verifying shared storage accessibility Checking shared storage accessibil

  • Bookmarks panel and page

    Hi experts I have set my pdf Initital View properties like in the screen shot. But the Bookmarks panel and page and window controls are not appearing while I open the PDF? any suggestions? I am using windows XP service pack3 Acrobat 9 Thanks in advan

  • Oracle Forms 11g Login Screen Not Appearing

    Environment: 1 PC running RHEL5 (Red Hat Enterprise Linux version 5) Operating System 64-bit with Oracle Database 11g (64-bit) 1 PC running RHEL5 (Red Hat Enterprise Linux version 5) Operating System 32-bit with Oracle Fusion Middleware 11g (64-bit),