How to split image into smaller (same size) pieces?

Hi all,
My question is how to split image into smaller (same size) pieces, using Photoshop elements 13? Could anyone help me with this one?
Thanks!

Use the Expert tab in Editor (I think that is what it is called in PSEv.13)
You may find the grid helpful. Go to View>Grid. It will not print, but will help to orient you. You can set up the gridlines to suit via Edit>Preferences>Guides and Grid. If you want to partition the picture in to 4 uniform pieces, it would be Gridline every 50%, Subdivision 1. Also, go to View>Snap to>Grid.
Set up the Rectangular marquee tool: If the picture is 6" wide & 4" high, enter width=3in & height=2in.on the tool's option bar. This will be a fixed size.
Click and select one quadrant, press CTRL+J to place this quadrant on a separate layer
Repeat for the other 3 quadrants
You should end up with 5 layers : Background, and layers 1, 2, 3, 4.

Similar Messages

  • Make a large image into smaller slices

    is there a way of splitting a large image into smaller
    sections

    wilburforce wrote:
    > is there a way of splitting a large image into smaller
    sections
    Check the help files on slicing. If you mean within the
    document window,
    use the marquee selection tools.
    Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
    http://www.projectseven.com
    Fireworks Newsgroup:
    news://forums.projectseven.com/fireworks/
    CSS Newsgroup: news://forums.projectseven.com/css/
    Design Aid Kits:
    http://www.webdevbiz.com/pwf/index.cfm

  • When dragging an image onto a fresh canvas, the resizing feature presnaps the image into the canvas size. I can confirm that this has not happened to me in previous projects. I've also tested this problem by making a new larger document size and dragging

    Contexts: I am very competent with GFX and have worked on many projects.
    When dragging an image onto a fresh canvas, the resizing feature presnaps the image into the canvas size. I can confirm that this has not happened to me in previous projects. I've also tested this problem by making a new larger document size and dragging in the same render. It snaps again. I don't want to re-size from the canvas dimensions, I want to resize from the render's original dimensions.

    Ap_Compsci_student_13 wrote:
    ok sorry but doesn't sscce say to post the whole code?the first S is Short, and yes, it needs to be all the code needed to illustrate the problem and let use reproduce it. If you were developing a new Web framework, your example might be short, but for a student game it's very long.

  • How to add images into a java application (not applet)

    Hello,
    I am new in java programming. I would like to know how to add images into a java application (not an applet). If i could get an standard example about how to add a image to a java application, I would apreciated it. Any help will be greatly apreciated.
    Thank you,
    Oscar

    Your' better off looking in the java 2d forum.
    package images;
    import java.awt.*;
    import java.awt.image.*;
    import java.io.FileInputStream;
    import javax.imageio.ImageIO;
    import javax.swing.*;
    /** * LogoImage is a class that is used to load images into the program */
    public class LogoImage extends JPanel {
         private BufferedImage image;
         private int factor = 1; /** Creates a new instance of ImagePanel */
         public LogoImage() {
              this(new Dimension(600, 50));
         public LogoImage(Dimension sz) {
              //setBackground(Color.green);      
              setPreferredSize(sz);
         public void setImage(BufferedImage im) {
              image = im;
              if (im != null) {
                   setPreferredSize(
                        new Dimension(image.getWidth(), image.getHeight()));
              } else {
                   setPreferredSize(new Dimension(200, 200));
         public void setImageSizeFactor(int factor) {
              this.factor = factor;
         public void paintComponent(Graphics g) {
              super.paintComponent(g);
              //paint background 
              Graphics2D g2D = (Graphics2D) g;
              //Draw image at its natural size first. 
              if (image != null) {
                   g2D.drawImage(image, null, 0, 0);
         public static LogoImage createImage(String filename) { /* Stream the logo gif file into an image object */
              LogoImage logoImage = new LogoImage();
              BufferedImage image;
              try {
                   FileInputStream fileInput =
                        new FileInputStream("images/" + filename);
                   image = ImageIO.read(fileInput);
                   logoImage =
                        new LogoImage(
                             new Dimension(image.getWidth(), image.getHeight()));
                   fileInput.close();
                   logoImage.setImage(image);
              } catch (Exception e) {
                   System.err.println(e);
              return logoImage;
         public static void main(String[] args) {
              JFrame jf = new JFrame("testImage");
              Container cp = jf.getContentPane();
              cp.add(LogoImage.createImage("logo.gif"), BorderLayout.CENTER);
              jf.setVisible(true);
              jf.pack();
    }Now you can use this class anywhere in your pgram to add a JPanel

  • How to load image into picturebox

    Hi! Does anyone know how to load image into picturebox by using J2ME? And how to crete the picturebox in the forst place?
    Thanks!
    Regards,
    Jaceline

    You want java.awt.Toolkit.getImage() and java.awt.Graphics.drawImage().
    Ted.

  • How to rotate images in small increments in preview

    how to rotate images in small increments in preview?

    it is not going to happen in Preview. They took away that functionality quite a few OS ago.

  • How to put image into pdf file in which image is set it in particuler frame size

    hi, i m creating app for generate pdf in which i can set image into pdf but the image sizze is large so the image is display over the text and how can i set text into pdf and also how to set textfilelds data into pdf or tableview data into pdf.help me plz

    Are you looking for image in selection column or as a separate column?
    --Shiv                                                                                                                                                                               

  • How can two pictures of the same size still appear to be a different size? (Photoshop CS6 problem)

    I called the big webdesign file "(X)" and the image I wanted to paste in it "(Y)",
    so that you won't be confused when you read it.
    What Happened
    For the design of a webpage, I made a photoshop-file(X) with a lot of squares(X). These squares(X) had the size 9,42×9,42 centimeters.
    I measured the squares(X) carefully and also made sure the size was in centimeters, so I am sure that the size was 9,42×9,42 cm.
    My plan was to fill the squares(X) with pictures(Y). I had a map on my computer with a lot of square-sized JPG-images(Y) in it. All I had
    to do was open the pictures(Y) in photoshop, change the size into 9,42×9,42 centimeters and copy+paste them into the squares(X)
    of the webdesign. I did this before and it worked perfectly.
    But then, I opened one of the images(Y) and when I wanted to resize it, the resize-tool said it was only 3,25×3,25 centimeters big.
    I thought it was strange, so I copied+pasted it into the design-file(X) with all the squares(X) that needed to be filled. Allthough photoshop
    had told me that the squares(X) in the file were 9,42×9,42 centimeters big and the image(Y) I resized was 3,25×3,25, the "small" image(Y)
    turned out to be bigger then the squares(X). And when I resized the "small" image(Y) into 9,42×9,42 centimeters, it was even bigger
    than it was before. How can this be, and how can I still make the images(X&Y) the same size?
    What I already tried
    - I made the file of the webdesign(X) with all the squares(X) into one layer, copied the file(X) and opened a new file(X) with the same
    measurements of the old file(X). I also changed the resolution of the file(X) into pixels/centimeters instead of pixels/inches.
    Then I pasted the image(X) of the old file into the new file. I didn't work; the image(X) that I pasted in the new file was bigger and
    when I pasted the other picture(Y) in this image, the same problem was still there.
    - I also opened the picture(Y) in photoshop, made a screenshot of it and then pasted the screenshot into paint. With paint I cropped
    it again and saved it as a JPEG-file. After that, I opened the image (Y) in photoshop again. It now had the size of 11,27×11,27 centimeters.
    Then I resized the image(Y) into 9,42×9,42 cm, but it still wasn't as big as the squares(X).
    Could you help me please?
    I really don't understand why this problem is happening and I can't think of a solution because I am still quite unexperienced with photoshop
    and I also couldn't find the answer on the internet. I assume the solution is very simple, but I haven't found it yet allthough I have to finish this
    project soon and I also have to use the image(Y). So any help would be very appreciated.
    Thanks,
    Simone

    You need to understand the basic of a digital image.
    Image is recorded as pixels and image is a rectangle so many pixels wide and so many pixel high.   Pixels do not have a fixed size. The images resolution setting defines the image current pixel size.
    So for example if you have and image that is 300 pixel wide and 200 pixels high and set its dip resolution to 100DPI the image size is 3" wide and 2" high.  Set its dip setting tp 300DPI the image size becomes 1" wide by 2/3" high.  Both the 3" x 2" and the 1"x2/3" images have the same 60000 RGB Colored Pixels.
    Web pages are sized to to be so many pixel wide and so many pixel high.  Often the height is not enforced scrolling is used when viewing. 
    However image for web pages often must not exceed so many pixel wide and high for displays have a fixed resolution and a fixed number of Pixels. You want images to fit on users displays.  Users use different displays some have high resolution displays and other have low resolution displays with far fewer pixels then high resolution displays.
    Web Image are normally image that have been interpolated down in number of pixels a resampled large image so that web image will fit on a low resolution  display with limited number of pixels. The image size the user see depend on the display they are currently using. A low resolution display's image will be much larger then the same image displayed on a nexus 10 with a 300dip display. Cheep low cost Desktop LCD have a 84DIP resolution, large high cost desktop displays are not be much higher in resolution somewhere near 108DPI.   Tablets, Laptop and Phones can have much higher resolution like the nexus 10 300DPI IPS display

  • Split image into clickable sections

    Hi, I was wondering if anyone know how to split an image into several clickable sections. I am trying to make the game "Risk", and I am sort of stuck at this problem. I have been thinking of making an individual image button for every country with the respective country as image, but I hope there is a better way to do this. The best would be to just split the world map into country sections.
    Thank you in advance
    OhM

    A naive (but possibly sufficient) implementation could just be to keep a table mapping (x,y) pairs to countries. To keep the table smaller, you could map 10x10 blocks of pixels to countries.
    Ultimately this is about storing and then managing data.
    One hack (in my opinion) is to check the color of the clicked pixel in the image of the map. But that is nasty for a variety of reasons (such as, it keeps you from being able to easily change the map image, and things like text in the map (like the names of countries) kind of screws that up. But it's an option.
    You can also keep lists of pixels in sequence describing a polygon, and then use certain algorithms (which I don't recall right now) to determine whether a given point is inside or outside a given polygon.
    Also you can do things like "binary space partitions", I think.
    These last two things are computer graphics techniques, and are non-trivial to implement. I dimly recall them from college but recall no details. You can get a computer graphics textbook (which tend to be expensive) to get more info, or these days there's probably a wiki about it somewhere.
    But I'd suggest keeping it modular. Add a layer of abstraction, writing an API around this functionality. Then write an implementation with a simple table of locations or blocks of locations, and if this proves to be insufficient later, swap it out with something more sophisticated.

  • Is Retina Display Algorithm Changing the Images at the Same Size?

    Hi. If the Retina Display has a denser pixerl per inch count, shouldn't it be making images smaller as you would in an iMac i7 display or any non Retina display for example? Is the Retina display and the iOS themselves are changing the images themselves so that they don't become smaller? Would that mean, photos for example are not in their original state when you view it on the Retina Display with it's added details coz' it's the photos remain the same size only sharper? If you saved that on your iMac, does it mean it retains the changes the Retina Display made to it when it's on your desktop Mac or does it revert it to the original? Thanks in advance. Gbu.

    Kiarazza
    No you are not wrong to be upset.  Should Apple have given you the heads up, yes.  Like you experience with Dell I had a similar experience with a phone a few years back, the store exchanged the one I purchased a short time later with the newly released device. The store employees are there to sell and we do live in a buyer be ware world for the most part.  Truthfully the store employees might not have even known when the new model would be released.  In general electronics are evolving extremely rapidly.  Any "new" phone, tablet, computer type device today will be an "old model" tomorrow.  While you feel you may have been mislead this is just a fact at this time.  With that said...
    While I have had iPods for years my first experience, and last, with an Apple store subsequent Apple's customer service was about 11-12 months ago when I got an iPad & iPhone. I have found them both to be substandard.
    But look at what you have and take it for what is, a pretty sophisticated devise.  the iPad you purchased is still a fine machine.  By no means is it out dated. Use it enjoy it and don't look back. You'll drive yourself mad otherwise because there will always be a newer model tomorrow.  
    These forums a full of some very helpful people for the most part. 
    Best of luck.

  • How to split image ... in MIDP ... ?

    Hi all, ...
    I'm currently working with MIDP 1.0, i want to make a simple image puzzle game that can split an image into 4 x 4 area, 6 x 6 area or 8 x 8 area ... Can someone give me the trick ... ?
    Thank you ...

    Image myBigImage = .someCodeThatLoadsTheImage();
    Image[][] smallImage = new Image[xSize][ySize];
    for(int i = 0; i < xNum; i++){
    for(int j = 0;J < yNum; j++){
    Image img = Image.createImage(xSize,ySize);
    Graphics g = img.getGraphics();
    g.drawImage(myBigImage, i * xSize*-1, y * ySize*-1);
    smallImage[i][j] = img;
    You simply create your small images and then draws the big image on the small image, the most part of the big image will not be seen.
    Do a little search about using clips since that is the underlying tecnique here.
    Regards
    Roland Carlsson

  • How to insert image into table and to in Oracle 9i intermedia?

    Mr Lawrence,
    I want to ask something:
    I use Oracle 9i intermedia
    If i use this script:
    CREATE TABLE images (
    file_name VARCHAR2(100) NOT NULL,
    image ORDSYS.OrdImage
    then
    CREATE OR REPLACE DIRECTORY imgdir AS 'd:/data';
    then
    INSERT INTO images (file_name, image)
    VALUES ('tree', ORDSYS.ORDImage.init('file','imgdir','tree.jpg' ));
    I put tree.jpg in directory d:/data in my hard drive.
    Is my tree.jpg file had already get in to my images table?
    I'm little confuse, because when i check my table with this script:
    select file_name, i.image.getWidth() from images i;
    it's show that my i.image.getWidth() for file_name tree is empty.. that mean my tree.jpg doesn't get in to my table.. am i correct?
    N also i want to ask how to display to screen all of my image from images table?
    Is it posible Oracle 9i intermedia to support display image from table?
    How?
    thanks Mr Lawrence

    -- First step would be to create a directory in oracle and map it to the folder where your image resides.
    create directory image_dir as *'c:\image_dir';*
    Then you would have to use a procedure to insert the image in your table. SO first create a table to hold the image. Note that you have to use a BLOB to insert the image.
    CREATE TABLE test_image
    ID NUMBER,
    image_filename VARCHAR2(50),
    image BLOB
    Now let's write the procedure to insert the image in the table above.
    CREATE OR REPLACE PROCEDURE insert_image_file (p_id NUMBER, p_image_name IN VARCHAR2)
    IS
    src_file BFILE;
    dst_file BLOB;
    lgh_file BINARY_INTEGER;
    BEGIN
    src_file := BFILENAME ('image_DIR', p_image_name);
    -- insert a NULL record to lock
    INSERT INTO temp_image
    (ID, image_name, image
    VALUES (p_id, p_image_name, EMPTY_BLOB ()
    RETURNING image
    INTO dst_file;
    -- lock record
    SELECT image
    INTO dst_file
    FROM temp_image
    WHERE ID = p_id AND image_name = p_image_name
    FOR UPDATE;
    -- open the file
    DBMS_LOB.fileopen (src_file, DBMS_LOB.file_readonly);
    -- determine length
    lgh_file := DBMS_LOB.getlength (src_file);
    -- read the file
    DBMS_LOB.loadfromfile (dst_file, src_file, lgh_file);
    -- update the blob field
    UPDATE temp_image
    SET image = dst_file
    WHERE ID = p_id AND image_name = p_image_name;
    -- close file
    DBMS_LOB.fileclose (src_file);
    END insert_image_file;
    Now execute the procedure to insert the image.
    EXECUTE insert_image_file(1,'test_image.jpg');
    Thanks,
    Aparna

  • How to import images into keynote without losing quality?

    Whenever I import (either by dragging or through keynote import) high resolution images (either jpg or png) at high resolution (say 1920x1280) into any keynote presentation (1280x1024) it somehow automatically gets compressed into a really ugly lowres image. This, in my case, makes it impossible to present designs properly. Is this a setting or am I importing them wrong?

    I think this is your answer.
    Images in JPEG format remain JPEG images; other formats are converted to TIFF. After an image has been downsampled, you can’t restore it to its original size by clicking Original Size in the Metrics inspector. To avoid downsampling and use images at their original size, turn off automatic downsampling inKeynote preferences.
    http://manuals.info.apple.com/en_US/Keynote09_UserGuide.pdf

  • How to include images into a servlet

    Hi guys,
    I found out that I can't include both the "setContentType("image/gif")" and the "setContentType("text/html")" in a servlet. I've tried different methods, but I can't get it right.
    Could anyone tell how to do that...?
    Thanks...

    I beg your pardon? You want to send text and image in the same response? Can't be done. If you go and look at pretty much any HTML page on the web you will see how to include images in HTML.

  • How to Split field  into multiple fields in  Import Manager without  delem

    Hi
      Is there any method to Split a record in MDM without using delimitter?
    I dont want to use any delemitter  My field content in Source is  PRODLABELPACK and I want to split it into 3 fields in destination  Field1= PROD
    Field2=LABEL   Field3=PACK
    I know how to split it if the content is PROD_LABEL_PACK .But we dont want to use delimiter in the firld and want to use some substring function
    Regards
    Prashant

    You Can use below FM  SWA_STRING_SPLIT -
    First Use READ_TEXT FM.
    then loop into
    loop at tline.
    Here use 'SWA_STRING_SPLIT' -> Pass tdline and append the text into other internal table.
    endloop
    Thank you
    Seshu

Maybe you are looking for


HashFlare