How to Start a color in the middle of a cell in the table & end in next cel

Hai,
I am developing a project in VB6 and the databse in MsAccess, i prepared the Report in HTML, Based on 2 Fields called Nextti & Duration Field I am coloring the Background of cells in the report table.
Actually the Color should start and end insdie or outside the cell based on the 2 Field Values.
Table is populated for 4 Years under that 48 months, therefor 2 row headings. 1 for showing Years in column & other for Months & with Some fields.
the below is the line i use to change the background of a particular cell. Its done when i populate the data in the HTML Report.
OutStream.WriteLine ("<td bgcolor=Yellow>" & Format(dtShade, "dd") & "</td>")
Now i am able to shade the Cell by giving its background color to yellow as below code
but the problem is i am able to change the background of the full cell. But i don't need to change the background of the full cell always. For example if Nextti value is 15/1/2005 & Duration is 30 then the shade should start from the middle of January Cell (because of the date 15th)end in the middle of next cell (February). If the duration is 15 then it should end in the (January) same end of cell. Kindly tell me how can i do this through HTML. I heard Div can be used to solve this issue. I am a beginner so kindly any one give me a appropriate example which will suit to solve this issue.
thankyou,
Chock.

Can you work out what the actual HTML is to do
"Whatever it was that you wanted to do" ? { I couldn't understand that }
I.e If you make up a Test table, with Your Text editor can you get a sample output that looks like you want?
But the problem is i am able to change the background of the full cell. But i don't need to change the background of the full cell always. For example if Nextti value is 15/1/2005 & Duration is 30 then the shade should start from the middle of January Cell (because of the date 15th)end in the middle of next cell (February). If the duration is 15 then it should end in the (January) same end of cell.
Is this something that can be done in HTML?
If your question is 'amenable' to HTML, figure out conditions for which you want to Set a certain color....
If the color in one cell for instance depends on the Next Cell, then you're going to have to buffer the whole Table ROW....
Set which ones should be RED for instance, then output that ROW in HTML...
If you are using Java for this, then also be aware that you might need to escape certain characters like use "\\" to get "\"
You'd also probaly have an easier time, however you are doing this if you used some sort of CSS .......

Similar Messages

How to change the color of the table columns........

Hi,
I am new to the Jdeveloper and also for the adf components.Actually i am working with the project which has already designed.Now i have to change the look n feel.
I want to change the color of the table colums.So could u tell me in which file i have to change and how.
I put in the jdeveloper.css like this ......
column.cell-number-band{
color :Teal
And in the adf-faces-config.xml i had only "oracle" type of skin.
I have to finish the work tomarrow itself......
So anybody helps me it will be greatfull me.

Hi Frank,
Thanks for the reply .I will try to create custom skin file.And one thing i tried to change the columns properties.I can see the changes on the Jdeveloper editor.But when i run on the server,I could't see the changes.....is there any way to change the column colors at run time????????
I appreciate ur response......
Thanks

How to define new colors for the form?(Finish)

Hello! Everyone!
I want to define new colors for the new form.
But I don't find where I can define it.
How to define new color for the form?
Thanks in advance!

You have to set the Canvas color or as I said earlier you need to use one of the available color schemas on the OAS or Builder runtime.
If you want to use user defined colors in the builder, then you need to create a new color palette and use it.
I personally haven't tried it, but there is a section in the online help that describes how to do this.
Tony

How to integrate conditional colors to the Report



Hi user487406,
What about a select like this:
select i.id,
 i.task_id,
 case i.severity
 when 1 then '' || i.severity || ''
 else
 to_char(i.severity)
 end severity,
 i.priority,
 i.task,
 p.project_name
from ideas i,
 project_lookup p
where p.project_id = i.project_id;
And PL/SQL like this:
q :=
' select i.id, ' ||
' i.task_id, ' ||
' case i.severity ' ||
' when 1 then '''' || i.severity || '''' ' ||
' else ' ||
' to_char(i.severity) ' ||
' end severity, ' ||
' i.priority, ' ||
' i.task, ' ||
' p.project_name ' ||
' from ideas i, ' ||
' project_lookup p ' ||
' where p.project_id = i.project_id; '; Regards Pete

How to start Integration server with the user XISUPER

Hi,
How to start Integration server with the user XISUPER?
Regards,

Mahesh,
In the post installation document, under Creating User XISUPER,
I see the following,
1.You must now log on to the Integration server host with the user XISUPER, to switch the initial password to a valid password.
2.You must restart the J2EE engine to transfer the user creation to the J2EE immediately.
I am unable to proceed here.Can you please help me to resume the post installation steps ?
Thanks,

How to start a thread after the execution/termination of another thread.???

Hello,
How to start a thread after the execution/termination of another thread....???
For example:
consider two threads: ThreadA and ThreadB
I could start the ThreadB after the execution of ThreadA.
How to identify the termination of one thread.....???
Please help me...
Thanks & Regards,
Kayalvizhi

What do you mean with "it doesn't work"? Do you get a compiler error? Do you get an exception at runtime? What's the error message?
Jesper

How To apply bold property to the table header

Hi All,
Please advice me that how to apply bold property and backgroud color to the table column header.?
Any help is greatly appreciated.
Thanks in advance.
Sathya Rani M

You can loop through the rows and apply the "fillColor" property for rows. Loop length is the "headerRowCount" of the table.
In the same loop you could also loop (a loop within a loop) through all cells of a row and set its "texts" obejct, which is an array, to the text style you wish. Or you could apply a paragraph style or a character style, that is pre-defined.
Uwe

How to display(binding) values in the table from more than one node?

Hi,
I have two nodes (TRIPS & AMOUNTS)in the context. How to bind these values into the table control?
When i bind second one, first one is getting replaced.

Hi Mog,
Of course it is possible to create a table from attributes of more than one node, and in some cases this is still necessary, but you have to do this the hard (manual) way.
If you have a table control, have a look at the properties and the elements belonging to it.
First of all, there is the property "dataSource", which binds to a multiple node (let's name it TableRootNode). This means that for each element of THIS node, one row is created. In each row the data of exactly one element of this TableRootNode is displayed.
Then you have columns in this table. Inside of the columns there is a header and an editor. The editor is the interesting part.
Normally the primary property of this editor is bound to an attribute of the TableRootNode. Then everything works as expected. If it binds to an attribute of a subnode (SUB) of TableRootNode, then in row i the data of the subnode of the i-th element of TableRootNode is displayed. There is no need for SUB to be a multiple node, but it must not be a singleton.
If you bind a property of the editor to an attribute, which does not lie in the subtree of TableRootNode, then you will see the same value in each row.
Now it depends on the structure of your context. Take the node, which is relevant for the change in each row (I assume it is TRIPS) and bind the table to the node as you are used to. Then for each additional column, you have to create a new column in the tree, create a new header element with a title and a new editor (e.g. textview or inputfield) and then bind the right property of the editor to the corresponding attribute in node AMOUNTS).
If these 2 nodes do not have parent-child-relationship, the tip to create a new node, which consists of the attributes of both nodes is the only solution.
Ciao, Regina

How to delete a column from the table control in module pool?

Hi,
can any one please tell How to delete a column from the table control in module pool?
thanks in advance
warm regards
HareeshKumar N

hi hareesh,
I think it is better to hide it.
How to hide: You can check this link
Dynamic Hide column in table control

How to export some data from the tables of an owner with integrity?

Hi to all,
How to export some data from the tables of an owner with integrity?
I want to bring some data from all tables in a single owner of the production database for development environment.
My initial requirements are: seeking information on company code (emp), contract status (status) and / or effective date of contract settlement (dt_liq_efetiva) - a small amount of data to developers.
These three fields are present in the main system table (the table of contracts). Then I thought about ...
- create a temporary table from the query results table to contract;
- and then use this temporary table as a reference to fetch the data in other tables of the owner while maintaining integrity. But how? I have not found the answer, because: what to do when not there is the possibility of a join between the contract and any other table?
I am considering the possibility of consulting the names of tables, foreign keys and columns above, and create dynamic SQL. Conceptually, something like:
select r.constraint_name "FK name",
r.table_name "FK table",
r.column_name "FK column",
up.constraint_name "Referencing name",
up.table_name "Referencing table",
up.column_name "Referencing column"
from all_cons_columns up
join all_cons_columns r
using (owner, position), (select r.owner,
r.constraint_name fk,
r.table_name table_fk,
r.r_constraint_name r,
up.table_name table_r
from all_constraints up, all_constraints r
where r.r_owner = up.owner
and r.r_constraint_name = up.constraint_name
and up.constraint_type in ('P', 'U')
and r.constraint_type = 'R'
and r.owner = 'OWNERNAME') aux
where r.constraint_name = aux.fk
and r.table_name = aux.table_fk
and up.constraint_name = aux.r
and up.table_name = aux.table_r;
-- + Dynamic SQL
If anyone has any suggestions and / or reuse code to me thank you very much!
After resolving this standoff intend to mount the inserts in utl_file by a table and create another program to read and play in the development environment.
Thinking...
Let's Share!
My thanks in advance,
Philips

Thanks, Peter.
Well, I am working with release 9.2.0.8.0. But the planning is migrate to 10g this year. So my questions are:
With Data Pump can export data just from tables owned for me (SCHEMAS = MYOWNER) parameterizing the volume of data (SAMPLE) and filters to table (QUERY), right? But parameterizing a contract table QUERY = "WHERE status NOT IN (2,6) ORDER BY contract ":
1º- the Data Pump automatically searches for related data in other tables in the owner? ex. parcel table has X records related (fk) with Y contracts not in (2,6): X * SAMPLE records will be randomly exported?
2º- for the tables without relation (fk) and which are within the owner (MYOWNER) the data is exported only based on the parameter SAMPLE?
Once again, thank you,
Philips
Reading Oracle Docs...

How to grant privileges on all the tables in a schema

Hi All,
Can you tell me how to grant privileges on all the tables of a schema A
to schema B.
For Example:
There are 200 tables in schema A, I wanted to grant select privilege on all the tables of a scheme A to schema B.
Thanks in advance.

note that USER is the user that will have the select priviledge
the procedure includes views as well
CREATE OR REPLACE PROCEDURE GRANT_ACCESS_ON_USER IS
CURSOR c1 is select table_name from user_tables;
CURSOR c2 is select view_name from user_views;
tablename user_tables.TABLE_NAME%TYPE;
viewname user_views.VIEW_NAME%TYPE;
BEGIN
tmpVar := 0;
OPEN c1;
loop
     fetch c1 into tablename;
     EXIT WHEN c1%NOTFOUND;
     EXECUTE IMMEDIATE 'GRANT SELECT on '||tablename ||' to USER';
end loop ;
close c1;
OPEN c2;
loop
     fetch c2 into viewname;
     EXIT WHEN c2%NOTFOUND;
     EXECUTE IMMEDIATE 'GRANT SELECT on '||viewname ||' to USER';
end loop ;
close c2;
EXCEPTION
WHEN NO_DATA_FOUND THEN
NULL;
WHEN OTHERS THEN
-- Consider logging the error and then re-raise
RAISE;
END;
/

How is it possible to split the table cells in Pages, Version 5.1

How is it possible to split the table cells in Pages, Version 5.1?

This is a feature removed in the change from Pages 09 to Pages 5.0.1.
If you need this facility, revert to Pages 09. If you upgraded to 5.0.1, then the earlier version is still in your Applications folder in a folder called iWork.

How to find latest entry in the table according to time

how to find latest entry in the table according to the time
is there any function module to do so
\[removed by moderator\]
Regards
Shashi
Edited by: Jan Stallkamp on Aug 25, 2008 4:39 PM

Hi,
If you want to read the entry from an internal table,
sort the internal table in the descending order by the time and
delete adjacent duplicates by comparing the fields other than time and the internal table will have the latest record.
Suggestion: instead of only time try to have one more field called date with the time combination
Regards,
Ramesh

How to fetch what are all the tables used in this TR no and Package name of

Hi Friends,
I have input of Transport Request no (E070-TRKORR).
How to fetch what are all the tables used in this TR no and Package name of this Table.

HI,
FYI
SELECT E071OBJECT_NAME, E070MDEVCLASS
FROM E071, E070M
WHERE TRKORR = YOU REQUEST NO.

Goto: How to export some data from the tables of an owner with integrity?

Hi to all,
Help please: How to export some data from the tables of an owner with integrity?
My thanks in advance,
Philips

Thanks, Peter.
Well, I am working with release 9.2.0.8.0. But the planning is migrate to 10g this year. So my questions are:
With Data Pump can export data just from tables owned for me (SCHEMAS = MYOWNER) parameterizing the volume of data (SAMPLE) and filters to table (QUERY), right? But parameterizing a contract table QUERY = "WHERE status NOT IN (2,6) ORDER BY contract ":
1º- the Data Pump automatically searches for related data in other tables in the owner? ex. parcel table has X records related (fk) with Y contracts not in (2,6): X * SAMPLE records will be randomly exported?
2º- for the tables without relation (fk) and which are within the owner (MYOWNER) the data is exported only based on the parameter SAMPLE?
Once again, thank you,
Philips
Reading Oracle Docs...

How to Start a color in the middle of a cell in the table & end in next cel

Similar Messages

Maybe you are looking for