How to start new messages and replies using text format only?

Hallo,
I would like to start typing a new message in text format without the need to type every time the key option shift command T.
The same, when I reply to a message I would like to use text only.
I have played with the preferences but any of them seems able to do what I want.
Is it possible to customize this in mail?
thanks

Thanks for the help,
I have already made these changes, but I was still having sign differences.
So what I have done now is go to preferences signs and for each account sign I have removed the option "use always my default font" and I have changed all signs font to the same of plain text.
I am trying now... seems better but I am not still sure that it is plain text.
thanks

Similar Messages

When i compose a new message and am typing in the name of the person to send it to it says iMessage after their name but when i click it says "Bonjour (offline) " my bonjour account isn't even enabled!? and it all used to work fine

When i compose a new message and am typing in the name of the person to send it to it says iMessage after their name but when i click it says "Bonjour (offline) " my bonjour account isn't even enabled!? and it all used to work fine please help!

Hi,
I invoked New Mesage
I typed a Name in Manually (rather than using the blue + icon)
I clicked on the "to" name and got this
Uploaded with Skitch!
I don't get a Bonjour Option here.
I do get a Jabber ID showing up for them but for soem reason it does not list my "From" account.
I would say that I have seen multiple "To"s and the same for the "From" choices and I think I have seen the Bonjour one listed.
However the "To" And "From"s don't seem to match and it appears you can iMessage Jabber names/ID or Jabber AIM names (which you can't in either case)
10:06 PM Thursday; March 8, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I upgraded to iOS 7 yesterday on my iphone and now none of my apps shows me any new message and when i open the apps it says "Connect to itunes for push notifications". Please help!!!

I upgraded to iOS 7 yesterday on my iphone and now none of my apps shows me any new message and when i open the apps it says "Connect to itunes for push notifications". Please help!!!

Same here. I don't know how to solve the problem, but I figured out a way to close the app without re-starting or resetting the phone. If you click ok and then press the home button twice really fast before the dialog box shows back up, you can put the phone in multi-tasking mode and close the app without having the shut the phone off or reset it. Anxiously awaiting the fix for this since I have several apps I use that I can access at the moment.

Sender File Adapter Conversion problem - how to start new recordset?

Hi guys!
I have a source file like following:
aaaakkkkkk
uuuupppppp
&&hhhhffffff
6666uuuuuu
3333rrrrrrrr
&&kkkkoooooo
which means - fixed length 4,6 and && starts new recordset.
I need to get structure like:
<recordset>
<item>
 <a>aaaa</a>
 kkkkkk
</item>
<item>
 <a>uuuu</a>
 pppppp
</item>
</recordset>
<recordset> ... with h,f and 6,u </recordset>
<recordset>
<item>
 <a>kkkk</a>
 oooooo
</item>
</recordset>
Any ideas?
Let's say, I can add && on the beginning of the file and other "lite" changes... but structure stays the same...
so, how to start new recordset? with which conversion parameter? for items it is clear...
Thanx a lot!
Olian
Message was edited by:
 Olian Saludew

aaaakkkkkk<end_of_line>&&uuuuwwwwww<end_of_line>...
then normal parameters should work fine,
item.fieldFixedLengths==4,6
Item.fieldNames=field1,field2
item.endSeparator=<end_of_line>

How to Start process in ProcessChain Without using Repeat option?

How to Start process in ProcessChain Without using Repeat option?

Se16 -- table:RSPCPROCESSLOG - click on display entries.
Entet the variant, instance start date (this info you can get from the "display message" of PC.
Now execute to display the table entries of RSPCPROCESSLOG.
Next goto SE37 transaction --enter RSPC_PROCESS_FINISH
Take the entries from the above table to set the input parameters of the FM.
I_logid = log_id(from above table)
I_type = type(from above table)
i_variant = varaint (from above table)
i_instance = (from above table)
Click on F8(EXECUTE)
now the actual process is set to gree and the process chain will be triggered (rest of the PC with out repeating the step from where is was red).

How to start the Message Server?

Hi,
I wish to start the J2EE engine and for the same it is mandatory to start the Message Server first.
In order to start the message server, I run the following command:
D:\usr\sap\J2E\SYS\exe\uc\NTI386>msg_server start
msg_server=>sapparam(1c): No Profile used.
msg_server=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
[Thr 7972] Wed Jul 25 23:39:18 2007
[Thr 7972] *** ERROR => MsSetWorkDir: chdir D:\usr\sap
D00\work [msntserv.c 170]
[Thr 7972] *** ERROR => MsSPrvInit: MsSetWorkDir [msntserv.c 87]
[Thr 7972] *** ERROR => mainU: MsSPrvInit [msxxserv.c 1634]
I gave my best time to search for Profile configuration details. But I could not do that.
Can somebody tell me how to start the Message Server?
regards,
Anand

Hi Anand,
Will be good to know what OS are you using...
If you're tryng to start an instance use <prompt>: startsap pf=<profile of the system you want to start>
If you logon as <sid>adm just type startsap
If for some reason you need to start only the message server try <prompt>: msg_server start pf=<profile of the system you want to start>
Regards
Juan
Please reward with points if helpful

Osx mac mail cant reply or start new message, but stores as unworkable drafts

osx mac mail suddenly cant reply or start new message, but stores as unworkable drafts
Dont think I did anything to provoke this, can still access on server sites, but heh I'm used to to mac mail

As per usual, I spend days working on a problem, finally give up and post to the discussion groups, THEN find the solution. It was the Signature file. It had either become corrupt (it contains graphics) or the bug fixes in 10.5.5 didn't like it. Either way, removed the sig file and everything works great again! Thanks!

Add telephone number to Start new messages from

My wife and I both have iphone and we have an ipad. On messaging from the ipad, we would like to have both numbers available to "Start new Messages from" How do i add another number to the ipad in that area?

Actually, it is possible, but I find that it causes more problems than its worth - for me and my wife anyway. I should qualify this by saying that as long as all of the iPhone numbers are associated with one shared Apple ID, it's possible to do this.
Settings>Messages>Send & Receive at>You can be reached by iMessages at> Check the phone number that you want to start the conversation from in there. Of course, the phone number has to be listed in there in the first place and you have to remember to change it every time you each want to shows your own number.
This should explain to you how to add all of your phone numbers if the are not already listed in there.
http://support.apple.com/kb/HT5538
Basically, you have to sign out of Messages on all devices, then sign in again on the phones to be able to add the numbers to the iPad.

I "reply"ed to an e-mail message. The next time when I chose to write a new message and type the first letter of the person I replied to earlier, that name and e-mail address appears as a choice included in a pop up list of my contacts.

I "reply"ed to an e-mail message. The next time when I chose to write a new message and type the first letter of the person I replied to earlier, that name and e-mail address appears as a choice included in a pop up list of my contacts. The persons name is not in my contacts and I would like to delete it from popping up. Do you know how I can do this?

The Mail app on the iPad/iPhone/iPod Touch does have an option to clear previous recipients. You can learn to live with it. But if you want to get rid of it, the only way to remove these cached email addresses from the Mail application is restoring the iPhone/iPod Touch as a new phone/iPod. If you restore from backup, the cache is also restored.
This article shows you the screens you will see during the restore: http://support.apple.com/kb/HT1414

How to add new row and update existing rows at a time form the upload file

hi
How to add new row and update existing rows at a time form the upload file
example:ztable(existing table)
bcent                      smh            nsmh         valid date
0001112465      7.4                       26.06.2007
0001112466      7.5                       26.06.2007
000111801                      7.6                       26.06.2007
1982                      7.8                       26.06.2007
Flat file structure
bcent                       nsmh         valid date
0001112465     7.8     26.06.2007 ( update into above table in nsmh)
0001112466     7.9     26.06.2007 ( update into above table in nsmh)
000111801                     7.6      26.06.2007 ( update into above table in nsmh
1985                      11              26.06.2007   new row it should insert in table
thanks,
Sivagopal R

Hi,
First upload the file into an internal table. If you are using a file that is on application server. Use open dataset and close dataset.
Then :
Loop at it.
*insert or modify as per your requirement.
Endloop.
Regards,
Srilatha.

How can I scroll messages and folders in Mail with Maverick? It's unacceptable for Apple

How can I scroll messages and folders in Mail with Maverick? It's unacceptable for Apple to have allowed this to happen

This problem has been discussed extensively in this thread:
https://discussions.apple.com/thread/5481937?start=0&tstart=0

Could you some one help me how to send a message on twitter using Oracle SOA?

Hi Team,
I am trying to send a message from Oracle SOA to Twitter, But i am not able to do the scenario.Could you some one help me how to send a message on twitter using Oracle SOA?
Regards,
Kiran

Very challenging and doubtful at the same time !
I don't think, its going to be a straight-forward one... Read about OAuth twitter authentication, before you try to post tweets.

How to calculate New customers and Returning customers in a Pivot Table?

Hi,
I have a Pivot table with columns as Order Date, Customer Name, Qty, Cost, Freight, Invoice, Adv Payment. I have only 30 customers and 11000 transactions for 4 years sales period.
How to calculate New customers and Returning customers in Pivot Table for any given Month or Quarter or Year. I am open to use helper column, formula or a calculated field etc
Thanks
Arjun

Hi Arjun,
I have received the file and read it, based on your further explain, I know your requested more clarity. In my view, the requested could be done via VBA code or Select function in other dataset, like Access/SQL. (Because before we count the new
customer and return customer, we might to filter them via rule, the formula need to assign the customer one by one. So, it's inefficient）
Thus, I recommend we try the above workaround: Use macro or Select function in Access. If you have further question about the coding, please post to the MSDN forum for Excel
http://social.msdn.microsoft.com/Forums/en-US/home?forum=exceldev&filter=alltypes&sort=lastpostdesc
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

I have a spinning wheel in Mail - stuck on trying to load a new message. I've force quit both Mail and my whole computer, but when I open mail again, it brings up the same new message - and the side bar curser is stuck in Drafts. What can I try to cancel

I have a spinning wheel in Mail - stuck on trying to load a new message. I've force quit both Mail and my whole computer, but when I open mail again, it brings up the same new message - and the side bar curser is stuck in Drafts. What else can I try to cancel

Can you log on to the email account via webmail in a web browser, view the email and delete it from there if necessary.

Can you copy/paste files from the Finder to Mail in Lion, or drag them onto the Mail icon in the Dock to create a new message and attach the files to it?

Message title says it: Can you copy/paste files from the Finder to Mail in Lion, or drag them onto the Mail icon in the Dock to create a new message and attach the files to it?
I can't find anything in the Knowledge Base that says these two options no longer work or still do.
I do not have a system capable of running Lion, but I need to know the answer nonetheless.

Gee, I don't know: "paste attachments mail Lion"? ;-)
One further question, if I may: in Panther (which is where I've aggregated nearly 7 years of mail), if you copy more than one file in the Finder, switch to Mail, and paste the files into a new message, only the file names paste in. If you copy one file and paste it into a Mail message, you get the file, not just the name. Is that still true, or has that (IMHO) bug been fixed since 10.3.9?

How to start new messages and replies using text format only?

Similar Messages

Maybe you are looking for