How to start with Acrobat SDK on Xcode?

Hello,
I'm a newer with acrobat sdk, does anyone know how to start and give me some commend for good books.
Does acrobat SDK 9 support Snow Leopard and Xcode 3.2?

OK, I installed the savage driver package and ran (as root)
X -configure
I took the resulting xorg,conf.new to /etc/X11 as xorg.conf.
When I startx as a user, the laptop screen stays black.
When I run
xdpyinfo
I get
unable to open display ""
When I enable "startkde" in ~/.xinitcr, the KDED configuration dialog comes up, but in a poor resolution.
In a way, X seems to work basically, but I suppose the resolution is at 640*480.
At /var/log/xorg.0.log I can't find any errors (EE), just 3D warnings, which shouldn't bother.
BUT..... it seems the X is taking mode 111 (640*480), but my 14" laptop would like 117 (1024*768).
Can you tell me, where and how I can switch the resolution in X ? I read about the "Displaysize" in the Monitor Section, but I couldn't figure that out. The funny thing is, I have a second laptop running, with 1024*768 (vesa driver), and there is no DisplaySize in its Monitor section, but this machine is running at the correct resolution. Strange.

Similar Messages

How i can start with j2ee sdk?

how i can start with j2ee sdk?

You're in the same boat I'm in. I started by looking at the tutorial! You will get your feet wet with this.
http://java.sun.com/j2ee/tutorial/index.html

How to start with JDeveloper?

As a straight A student of Computer Science, I put my hands on database development of an information system project for our CS faculty this summer. JDeveloper is used as the IDE for such project.
I have learnt Java 2 and something about Oracle database in my courses. Now, after reading the product introduction and a short online course outline in iDeveloper2001, I have a brief idea about it. But since I can not afford much, how to learn more about it? Could you offer me some advices?
Thanks a lot!

The online users guide and documentation is the best place to
start to learn how to use JDeveloper.
- PSW
Ram Purushothaman (guest) wrote:
: Hi,
: I am new to this Jdeveloper. I need to develop a intranet
: project. Basically, I have to get the employee details from the
: HR like work-telephone, email-address, etc.
: Can somebody let me know how to start with Jdeveloper.
Basically
: I need to have a query screen (query by last_name or first_name
: etc) and a result screen (results based on the query).
: Any help is appreciated.
: Thanks.
: Ram.
null

How to start with AOL

Hi,
Can anyone please provide me the documents on how to start and learn with Oracle apps AOL(technical).
Please provide me the required documents to learn.
Thanks in advance.

Duplicate thread.
How to start with AOL
How to start with AOL

How to start with FPGA and LABVIEW when you do not know any computer language? Only have exposure to Windows OS.

Myself is an Electronics Engineer. But I don't have any exposure to any comp language like C or whatever. I do not have any exposure to Labview as well. I've been involved in design and developing Digital Circuits like interlock units, Position monitoring and display systems etc. Now I want to work upon FPGA based circuits. Can anyone suggest me plz that how to start with?

Hi BNarendra;
Here are some resources that can be useful, the first is an introduction to LabVIEW and the other ones are for LabVIEW FPGA.
LabVIEW
http://zone.ni.com/devzone/cda/tut/p/id/5247
LabVIEW FPGA
http://www.ni.com/swf/presentation/us/labview/lvfpga/default.htm
http://digital.ni.com/public.nsf/allkb/0697A6F4BFC6E152862570FA0072153A?OpenDocument
http://zone.ni.com/devzone/cda/tut/p/id/3261
I hope the information is useful.
Good Luck!
Francisco Arellano
National Instruments Mexico
Field Systems Engineer - Energy Segment
www.ni.com/soporte

How to Start With

hi all,
I am a java developer, i came across FB and FDS through my
Friend, and soon, got addicted for the latest RIA development
tools.
I downloaded the Latest Trial of both FB and FDS and try to
start things...but, i got stuck up at the initial configuration
stage itself.
can anyone point me to how to start with FDS and Java, any
site URL or sample code....so that i will start working with
FDS.
cheers
saikiran

Hello There,
There is plenty of stuff to start with for Adobe Flex. I will
say start searching for tutorials available online & checkout
flex developers blogs.
www.adobe.com/devnet/flex/ is the best resource available,
there are sample applications available along with the code,
different blogs are also listed there.
If you are java developer & have knowledge of Hibernate,
I would suggest start with:
http://blogs.adobe.com/mtg/2006/08/my_first_hibernate_enabled_fle.html
Best of Luck!

How to start with CDC?

Hi, friends:
I have read much online material about CDC, but I'm still confused.
I knew that I can download the WTK2.2 or higher to develop the app based on the CLDC and MIDP.
My question is how to start with CDC. For example, If I use JBuilder, what stuff should been downloaded and installed? and how about the Eclipse?
And some online learning resource is better!
Thanks in advance!

See
http://home.elka.pw.edu.pl/~pboetzel/
for HOWTO run SWT application on PocketPC (emulator). I used CDC 1.1 Personal Profile 1.1. You will find exact instructions what to download and install to write and run CDC applications. And also links to other guides and tutorials.

How to start with BSP

Hi
I am Vijay and i'm new to BSP.
I want to know how to start with BSP and what kind of questions i can expext in interviews on BSP ...!

Welcome to SDN.
best place ot start learning BSPs is
http://help.sap.com/saphelp_nw04/helpdata/en/e9/bb153aab4a0c0ee10000000a114084/frameset.htm
Regards
Raja

How to start with Java TV API?

Hi,
I am new to Java TV API and i don't know how to start with it. Can any body suggest me what i would require(Software and hardware) to start coding in Java TV. Is MHP API are required for it if yes then how i can get those APIs??
Thanks in advance
Sajal Mahajan
[email protected]
Message was edited by:
Sajal.Mahajan

OCAP 1.0 and 1.1 specifications are avaible here:
http://opencable.com/specifications/ocap.html
tutorials:
http://interactivetvweb.org
Emulator:
http://xletview.sourceforge.net/

How to start with OA Framewok.

Hi All,
Can you please let me know how to start with OAF and which software needs to install to start with.
Also, please send me the document if you have for OAF.
Thanks in Advance,
Amol

refer this http://prasanna-adf.blogspot.com/2008/11/new-to-oaf.html
--Prasanna

How to start with bsp's

i'm new to bussiness server pages, how to start with it.
how to create a bsp application and work with it.

hi phani,
to start creating a bsp application,
first go to se80 tcode, there select 'bsp application' category and create a new application.
now you can start creating your first bsp application.
use the following link for it :
http://help.sap.com/saphelp_nw2004s/helpdata/en/c8/101c3a1cf1c54be10000000a114084/content.htm
plz reward if useful.

How to start with RMAN as I am beginner?

Dear all,
How to start with RMAN as I am beginner? Any simple document or guide line for me.
Thanks,
Amy

How to start with RMAN as I am beginner? Any simple
document or guide line for me.go to yours oracle home directory /orahome/bin there is RMAN exe tool run it it will show you prompt RMAN
Recovery Manager: Release 10.1.0.2.0 - Production
Copyright (c) 1995, 2004, Oracle. All rights reserved.
RMAN> connect target sys/sys
connected to target database: ORCL (DBID=1171886541)
RMAN> backup database
2> ;
Starting backup at 21-JAN-08
using channel ORA_DISK_1
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
input datafile fno=00001 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL\SYSTEM01.DBF
input datafile fno=00003 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL\SYSAUX01.DBF
input datafile fno=00005 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL\EXAMPLE01.DBF
input datafile fno=00002 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL\UNDOTBS01.DBF
input datafile fno=00004 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL\USERS01.DBF
channel ORA_DISK_1: starting piece 1 at 21-JAN-08
channel ORA_DISK_1: finished piece 1 at 21-JAN-08
piece handle=C:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2008_01_21\O1_MF_NNNDF_TAG20080121T135924_3S8QQF74_.BKP comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:01:15
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
including current controlfile in backupset
including current SPFILE in backupset
channel ORA_DISK_1: starting piece 1 at 21-JAN-08
channel ORA_DISK_1: finished piece 1 at 21-JAN-08
piece handle=C:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2008_01_21\O1_MF_NCSNF_TAG20080121T135924_3S8QSSN4_.BKP comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:03
Finished backup at 21-JAN-08
http://www.orafaq.com/faq/rmanKhurram

How to start with framemaker 11 for online documentation

How to start with Adobe Framemaker 11 for online documentation?

Hi,
Try googeling and search for adobe actionscript code and tutorial e.g.:
http://fmsguru.com/tutorials.cfm
http://www.flashcomguru.com/tutorials/
http://www.adobe.com/devnet/flashmediaserver/
Good luck,
Alon

QTP Automation with Acrobat SDK

Hi,
I would like to verify the PDF content using HP Automation tool - QTP by opening the PDF and extracting the Text content from PDF.
I am trying the OLE style and using a series of commands, as described in many postings. The first one is:
CreateObject("AcroExch.App")
It throws error, saying "Cannot create ActiveX component"
From the Forums I found that it will not work with Adobe Reader and will work with Full Adobe Product with Adobe SDK.
Now I would like to know which version of Acrobat will have Acrobat SDK.
My Client already procured the below Acrobat Products.
VLA ACROBAT 10 win universal English
VLA ACROBAT 10 WIN Universal English STD to STD Upgrade ST-ST
VLA ACROBAT Pro 10 win universal English
VLA ACROBAT Pro 10 WIN Universal English STD to STD Upgrade ST-ST
Pls let me know which product( which has Adobe SDK as well) I should choose to proceed with QTP Automation.
Any Advise/Help greatly appreciated.
Thanks.
Anand Muthunayagam.

Check out http://labs.adobe.com/technologies/aptt/
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Fri, 28 Oct 2011 06:09:25 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: QTP Automation with Acrobat SDK
QTP Automation with Acrobat SDK
created by AnandMuthuNayagam<http://forums.adobe.com/people/AnandMuthuNayagam> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/3995113#3995113

How [Insert|Add] Image into Opening PDF file with Acrobat SDK.

Hi Guys,
I'm trying to insert|add image file into opening PDF file with specified location (X|Y) and scale (Width|Hight) but got many of troubles
If use third party like iTextSharp or something else thing become simple but i want to use Acrobat SDK to do this
Any suggestion or idea?
Any help appreciated.

Thank for your interested.
I use VB.NET and Acrobat
Here is some my code:
Try
   If File.Exists(T(0)) Then
   Dim AcroAVDoc As AcroAVDoc = Ap.GetActiveDoc
   Dim AcroPDDoc As AcroPDDoc = AcroAVDoc.GetPDDoc
   Dim AcroPDPage As Acrobat.AcroPDPage = AcroPDDoc.AcquirePage(Integer.Parse(T(3)))
   Dim data() As String = T(1).Split("^")
   Dim imgX = data(0)
   Dim imgY = data(1)
   Dim imgWidth = data(3)
   Dim imgHight = data(4)
   'TODO: insert into opening PDF file
   Return 1
   End If
   Catch ex As Exception
   End Try
I don not know what to do next to insert an image (JPEG, PNG, ..) into PDF file.
Can you show me or suggest some solution, idea?
Thank in advance.

How to start with Acrobat SDK on Xcode?

Similar Messages

Maybe you are looking for