How to stop a while loop when using tab control

How do you use a tab contol to stop what is happening on one tab when you switch to another tab?  In the test example I attached, I have a while loop nested inside a case structure controlled by the tab control.  When I tab to page two the elapsed timer starts but when I switch to another tab it does not stop.  I can't come up with an easy way to stop or exit the while loop when I change tabs. 
Thank you
Danny
Attachments:
tab control.vi ‏24 KB

I played with it a little more and came up with this fix.  This fixes it but is not tied to the changing tabs as I was looking for.  Is this just too many nested loops and a bad idea?
Danny
Attachments:
tab control fix maybe.vi ‏26 KB

Similar Messages

  • How to stop a while loop after certain time using Elapsed time vi

    how to stop a while loop after certain time using Elapsed time vi.

    Hi Frankie,
    Just place the Elapsed Time VI inside the WHILE loop, and wire the 'Time Has Elapsed' output to the conditional terminal in the lower right corner (which should be set to 'stop if true' by default).
    In the future, please post your LabVIEW questions to the LabVIEW Forum.  You have a much better chance of getting your questions answered sooner, and those answers can then help others who are searching the LabVIEW forums.  Thanks!
    Justin M
    National Instruments

  • How to stop a while loop in LabVIEW from a C program

    How to stop  a while loop in LabVIEW from a C code

    hi
    I think by creating dll you can stop the while loop from your C program.For that you just create dll (Dynamic Link Library) for the VI which has that while loop.
         Anyway can u please explain ur requirement clearly.

  • How to stop a while loop of event structure from a main vi

    Hello;
    sorry for my english
    I have to stop a subvi from my main vi, the subvi contains a while loop and an event structure so I need to stop this loop while directly from my main vi I have tried global variable but it did not work
    any help please or example !!!   
    Solved!
    Go to Solution.
    Attachments:
    stop a while loop and event structure from main vi.png ‏16 KB

    IYED wrote:
    Hello;
    sorry for my english
    I have to stop a subvi from my main vi, the subvi contains a while loop and an event structure so I need to stop this loop while directly from my main vi I have tried global variable but it did not work
    any help please or example !!!   
    If this is an example of how your code looks, I'd clean it up before the developer who has to work on it next hits you over the head with his LabVIEW Style Book. 
    Bill
    (Mid-Level minion.)
    My support system ensures that I don't look totally incompetent.
    Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

  • How to stop a while loop with long delay

    Hi everyone,
    I am building a simple program for turning on and off a single Bit.  The task is to turn ON the Bit for a period length T1, and OFF the Bit for a period length T2. T1 is normally different from T2, and can be controlled  by users. 
    Since T1 and T2 can be variable, they sometimes can be very long.
    If I use a Wait function inside a While loop, it needs long delay to be able to Stop the Main program.
    The same situation happens when I use Timed loop.
    Can anyone suggest me how to do this task?
    Thanks a lot. 
    Message Edited by tatuan on 04-12-2010 12:56 AM

    Here's another possibility using OpenG Wait ms:
    Ton
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!

  • How to stop a while loop which contains a timed loop

    Hi,
    I'm a new hand to labview, and I'm using labviw 7.1, NOT 8.x.  I'm trying to do a measurement, in which the flow would look like the attached file (I have stipped all hardware related components to make it easy to read).  My questions are:
    1. In Loop 3, when the comparison (x>20.85) is true, Loop1, Loop2 and Loop3 are stopped, why it won't quit the while loop (I have wired it to  while loop stop)?
    2. When it is running, I click on stop button, why it won't stop?
    Thanks!
    Attachments:
    SyncTimedLoop32.vi ‏228 KB

    hwm wrote:
    2. When it is running, I click on stop button, why it won't stop?
    The stop button is read outside of the inner while loops.  So the inner while loops will continue to run until their stop conditions are met.
    hwm wrote:
    1. In Loop 3, when the comparison (x>20.85) is true, Loop1, Loop2 and Loop3 are stopped, why it won't quit the while loop (I have wired it to  while loop stop)?
    It seemed to me like it would, but sometimes it seemed like I had to set change the numeric value one more time before it would.  You have a very odd structure there by placing the event structre inside the while loop with the other loops.  I think you may be running into issues where events are getting queued up in the event structure, or race conditions between when the event structure might execute relative to the other loops.  It is all very odd and difficult to predict all the ways these structures might interact and relative timing.  Usually event structures would belong in their own parallel while loop.  I think you need to rethink exactly what you are trying to do here.  It probably isn't event necessary to use the stop timed structure functions.  A local variable or a notified to pass the "Stop status" from loop 3 to the other loops (or the separate event structure loop to the other 3) would probably be better.

  • How to stop the "Read Reciept" when using messaging in the BI Process Chain

    Hey all - I set up a message in my process chain and now we get an email daily when that process finishes.  However it's asking for a read receipt from the users that it sends the message to.  I searched on this and also clicked on every button the message settings but could not find a way to turn off the read receipt request. 
    Does anyone know how to turn this off?

    HI,
    Go To
    1. SCOT   Tcode.
    2. Click on SETTINGS on the upper tab.
    3. Click on CONFIRMATION OF RECEIPT..
    4.and check the Radio button.. SAP  doesnot expectreceipt confirmation from internet..
    and click the tick button..
    Hope this helps u..
    Best Regards,
    VVenkat..

  • How to stop page from resetting when using a laser barcode scanner to fill input areas.

    I am using Firefox 30 with Mac OS 10.9 at work. We keep track of workflow using a 3rd party website and scan the information in with a UBS laser barcode scanner.
    In Firefox the input regions will fill with the information, but then clear without saving or sending the information to the site. What settings are needed for Firefox to keep and send the scanned information?

    Just a WAG.
    Try the first item in Accessibility = Always use the cursor keys to navigate within page
    ''assuming that web app doesn't use the cursor keys for anything''
    Have you attempted to get support for that website or website app?
    Without more information all we can do is guess.
    It's been 10 years or so, but I did play with the CueCat barcode scanner a bit and even modified some software that I found on a CueCat enthusiast website to do silly things and to re-purpose it to keep an inventory of my CD collection. ''(Yep, that long ago.)''
    The CueCat it was sending keyboard commands, which wasn't hard to figure out, because it piggy-backed on the PS/2 keyboard cable; there were a very small number of USB versions made for retail store kiosks and for demo purposes, but the whole project was killed before they started making the USB for consumers.

  • How to determine the positioning order when using tab key?

    Hallo,
    in my jspx-page i want to define the order which the cursor jumps when the user is using the tab key.
    i don't know how to? in html there i can use tabindex. which way i must go?
    Any help is appreciated.

    I found that tabindex is not applicable. But i think it is an important point for better handling.
    Is there no easy way to do it?

  • I have a for loop inside of while loop.when i press stop for while loop, i also would like to stop for loop.how can i solve this problem?thanks

    i have a for loop inside of while loop.when i press stop for while loop, i also would like to stop for loop.how can i solve this problem?thanks

    Hi fais,
    Following through with what JB suggested. The steps involved in replacing the inner for loop with a while loop are outlined below.
    You can replace the inner for loop with a while by doing the following.
    1) Right-click of the for loop and select "Repalce" then navigate to the "while loop".
    2) Make sure the tunnels you where indexing on with the for loop are still indexing.
    3) Drop an "array size" node on your diagram. Wire the array that determines the number of iterations your for loop executes into this "array size".
    4) Wire the output of the array size into the new while loop.
    5) Set the condition terminal to "stop if true".
    6)Drop an "OR" gate inside the while loop and wire its output to the while loops condition terminal.
    7) C
    reate a local of the boolean "stop" button, and wire it into one of the inputs of your OR gate. This will allow you to stop the inner loop.
    8) Drop a "less than" node inside the inner while loop.
    9) Wire your iteration count into the bottom input of the "less than".
    10) Wire the count (see step 4 above) into the top input of the less than. This will stop the inner loop when ever the inner loop has processed the last element of your array.
    Provided I have not mixed up my tops and bottoms this should accomplish the replacement.
    I will let others explain how to takle this task using the "case solution".
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • How do i stop a while loop

    I'm new to labview and I'm having a problem stopping a while loop (running windows XP/2000 with the student edition of labview express 7).
    I'm doing a data acquisition program where I'm constantly reading in voltage and comparing it to a set point value, when the input voltage goes above the set point, i want the while loop to stop. How do I do this? I already have an LED going on when the criteria is met, but I'm not sure how to actually stop the loop (i.e. change the iteration value from true to false-i guess). If anyone can please assist me with this I would very much appreciate it.
    I've included my program too.
    Attachments:
    CO_Detection_Monitoring_System_Modified.vi ‏60 KB

    Hello Everyone-
    I've just posted a message about stopping a while loop and it was answered accurately and quickly- thanks to LV_Pro and PauloM- thanks much- its nice too see that there are many helpful people out there! Unfortunately, I have 2 more questions to ask of the forum.
    My application is almost completed- I just need to add an elapsed time counter that will tell me how long it took for my LED to trigger (from my set point-i.e. when from 0:00:00 until when my loop stopped).
    Now I've found a perfect elapsed time counter on the NI web site contributed from Mike Hall from Ohmeda Medical- the page is here.... http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=D37E2493DC333076E034080020E74861&p_node=DZ52032&p_source=external
    So my first question is, it looks like I can just extend the while loop box in my 'CO detector... .vi' and paste just the code from the 'elapsed time.vi' while loop into my loop and I will be set- but do I need to change my wait until next multiple to be a 1000 too in my program? Probably, but I'm not sure hence the question- or other ideas would appreciated.
    My second question is now that my application is complete (after I add the elapsed time above), I need to exactly duplicate this process for 7 other DAQ inputs (i.e. right now I'm using only 1 of 8 analog inputs on the FP-AI110). So should I make my 'CO detector.. .vi' a separate program (I remember reading something about this in one of the posts earlier).
    Any help is very appreciated.
    Thank you again,
    Daniel
    Attachments:
    CO_Detection_Monitoring_System_Modified.vi ‏60 KB

  • Code golf: stop two while loops with guaranteed iteration ratio

    Proposal
    In the vein of the Perl tradition, I'd like to see if there's any interest in solving short programming puzzles in LabVIEW. Anyone can post a problem and define the rules for solving it.
    Here's a beginning/intermediate question to whet your "palette".
    Description
    With one user-action, how would you stop two while loops such that the ratio of their iterations is the always the same? One concrete way to visualize this situation is in taking measurements: two instruments use the same timing source to take measurements, but second divides the clock down so that it is an integer factor slower than the first. For example, if the slower instrument is four times slower, then at the end of the VI, if the slower instrument takes 100 measurements, the faster instrument has taken 400.
    Rules
    You may only use vi.lib
    You cannot include any other subVIs
    Your solution must pass for loop1 interval as low as 25 ms
    Template (attached in LabVIEW 2009)
    If folks are interested in this, then let's figure out how to make future problems better. Please post your suggestions and critiques, but only if you also post a submission ;-)
    Solved!
    Go to Solution.
    Attachments:
    Multirate Loop Code Golf.vi ‏11 KB

    Norbert_B wrote:
    a) You work with an integer factor of speed. While this matches many application areas, there are still cases where the factor has to be floating point (e.g. 2.5). Additionally, the factor might "invert", so the master loop runs slower than the slave (factor 0.5 for instance).
    It sounds like you're about to post another code golf question. If you think the problem scope is too small, you're welcome to fashion one to your taste. Thanks for volunteering :-D
    Norbert_B wrote:
    b) This example does not take into account that the hardware has to be synchronized with more accuracy than the software supplies (PXI?). If hardware synchronization is required, there are two possible ways:
    - The factor can be included in the synchronization (using PLL for instance)
    - The factor has to be software implemented by data reduction for the task running at the lower pace.
    Hrm, maybe puzzles aren't really your thing after all. You are correct: I did not define every constraint that can lead to a provable best closed-form solution, but that does not prevent people from stating their assumptions and forming creative, well-reasoned, and still correct designs. I overlooked this reading of the description and neglected to add a statement that said solvers were free to add their own conditions. I will do so in the fugure :-)
    If we choose the first of your suggestions, the VI must still retrieve the data at different rates. You can dedicate a loop for each instrument to decouple any jitter and latency introduced by their connectivity or internal operation; this adds some margin of safety when there is thread and driver contention. You can also implement a single counting loop like altenbach and forego the multiloop complexity.
    Norbert_B wrote:
    c) You don't state anything about "what happens with the data". Is this time consuming? Does it introduce additional delay in loop iterations? Is it OK to have data loss?
    I don't know -- you decide, you disclose, and you solve :-)
    In my specific situation, the measurements are time consuming and do add delay (each data "sample" is 5-20 megabytes), none can be lost, and the data must be available for others to analyze later. In addition, the amount of data is saturating the hard disk throughput. If a particular write takes too long, the instrument driver may overwrite a yet unfetched sample, which is unacceptable. I did not add these details to the problem discripton becuase they don't impact the puzzle.
    I don't want to burden people with my situation and ask them to solve my problem: I want to encourage them to bring their intuition and experience to a discussion. This is the design process at its heart: understanding why and how constraints affect your decisions. If a person states the additional conditions they've assumed, readers can learn why, and more importantly, when a Notifier might be more desirable than an Occurance or a Queue more robust than a Data Value Reference.
    The best NI-published advice for stopping multiple while loops (https://www.google.com/search?q=labview+stop+multiple+while+loops) is laughable (and is the "solution" in my template).
    Would you care to re-approach and contribute to this puzzle? I suspect you have a lot to offer :-)

  • Stop 2 while loops into another

    hi,
    I'm a beginner in labview and i've got  problem!!!
    My program is composed of 3 while loops (2 into one) and i'd like to stop it with only one STOP button.
    I can't use local variable with stop so i'm wedged!!!
    I use LV 6.0
    I think it's very difficult but .....
    Sorry for my english, it is very bad!!!
    Thanks!!
    Lacoule

    Hi Lacoule,
    I guess you could not use local variables for boolean controls with a latch function, only a switch function works with local variables.
    One simple way to achieve what u want is, (assuming that you stop button is in the inner loop) use stop button to stop the inner + enter a pre-defined string or numerical value in a global or local variable and when the control comes out to the outer while loops, just use a  compare function to generate a true state and can stop the other two loops.
    I hope this helps.
    -Mohan.

  • Stop multiple while loops in Vision Aquisition

    Hi,   I want to close multiple while loops with one stop button. I'm using the Vision Acquisition software for recording from multiple cameras and I want to close this recording from all cameras simultaneously. Since I'm knew to LABView I don't know how to do this. I'll include my VI here and maybe someone can help me.  Thanks!
    Solved!
    Go to Solution.
    Attachments:
    Aquire Images 2 with Cameras.vi ‏410 KB

    A local variable should be enough for your implementation. Look at the following article:
    Stopping Parallel While Loops in LabVIEW With One Stop Button
    Adnan Zafar
    Certified LabVIEW Architect
    Coleman Technologies

  • Stopping a while loop with a button in cvi

    Hi people,
    I am a newbie with CVI but I have used LabView Heaps. The issue I have is I want to be able to use a toggle button or a command button to stop a while loop. I used GetCtrlVal on the toggle before the while loop. I then enter the while loop and then GetCtrlVal at the end to see if the button has been pressed. The issue I have is that once I enter the loop I am unable to press any buttons on the Panel. I would normally have put a delay in the loop but the issue is I am wanting to control a robot in "realtime", thus any delays in the program results in the robot moving further than what I wanted it to. Any ideas? If you have any suggestions that would be much appreciated thank you.

    This should be in the CVI group but...
    At the tail end of your while loop add a call to function ProcessDrawEvents():
    When your program executes in a callback function or in code that does not call RunUserInterface or GetUserEvent, LabWindows/CVI does not update the user interface. Functions that are overly time-consuming can "lock out" user interface updates. To allow LabWindows/CVI to process these updates, call ProcessDrawEvents.

Maybe you are looking for

  • Convert doc to PDF and make it available for workspace

    Hi, is there a way, how to convert a doc file to PDF file and make it available for the workspace (accept - deny scenario)? Lets say, that I have a contract that has to be approved by my manager. I convert the doc to PDF file and send it to his to-do

  • Can I use my old Macbook Pro Ram in the New Macbook Pro (late 2008)

    I have 2, 2 gig DDR2 sticks of ram in my macbook pro. I wanted to know if they would work in the new macbook pro (late 2008)? I know the new one uses DDR3 - What would be the downside of using DDR2 in a DDR3 macbook? Would the graphics cards work to

  • After upgrading to NW 7.01, issue with height/width using %

    We upgraded our backend xRPM ABAP Stack to Netweaver 7.01 from 7.0. Now, our Adobe forms (ADS sits on a java Netweaver 7.0 server) are not displaying correctly - we launch them from ABAP Web Dynpro into a separate window. The forms appear in a small

  • IE9 Crash in Flash Player

    today twice: Name der fehlerhaften Anwendung: iexplore.exe, Version: 9.0.8112.16421, Zeitstempel: 0x4d76255d Name des fehlerhaften Moduls: Flash10x.ocx, Version: 10.3.183.10, Zeitstempel: 0x4e764622 Ausnahmecode: 0xc0000005 Fehleroffset: 0x001a1082 I

  • Could we have same name's for User and Groups in Active directory

    When iam trying to create a user name " Logistics " under a OU, I am getting a error "The pre-windows 2000 logon name you have chosen is already in use in this domain. Choose  aother pre-windows logon name, and then try again" We already have a group