How to stop an unknown caller getting thru

How do I set up my iphone 4s to stop all 'unkown caller id' from getting thru?

Suggest such to Apple:
http://www.apple.com/feedback/iphone.html
You can block your number, same way they can. As an example, on AT&T, if you first dial *67, then the number, your number gets blocked.
Or, on your phone: Settings>Phone>Show My Caller ID>On/Off.

Similar Messages

I believe that i have malware on my mac, osx 10.9.4. accordingly, i've tried to run clamxav (on my mac HD) but just get a spinning wheel, then have to shut down. any advice on how to stop spinning wheel or get rid of malware? please help. :-).

i believe that i have malware (possible highjack of safari browser) on my mac, osx 10.9.4. accordingly, i've tried to run clamxav (on my mac HD) but just get a spinning wheel, then have to shut down. any advice on how to stop spinning wheel or get rid of malware? i have symnatic endpoint and, after scanning, it reveals nothing. please help. :-).

are locked user files or that have incorrect permission a bad thing?
Yes.
why am i removing symantec?
Short answer: Because it's worse than useless and worse than the imaginary "viruses" you're afraid of would be if they really existed. For the long answer, see below.
1. This is a comment on what you should—and should not—do to protect yourself from malicious software ("malware") that circulates on the Internet and gets onto a computer as an unintended consequence of the user's actions. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the computer, or who has been able to log in to it remotely. That threat is in a different category, and there's no easy way to defend against it.
The comment is long because the issue is complex. The key points are in sections 5, 6, and 10.
OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user. Internally Apple calls it "XProtect."
The malware recognition database used by XProtect is automatically updated; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
The following caveats apply to XProtect:
☞ It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
☞ It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
As new versions of OS X are released, it's not clear whether Apple will indefinitely continue to maintain the XProtect database of older versions such as 10.6. The security of obsolete system versions may eventually be degraded. Security updates to the code of obsolete systems will stop being released at some point, and that may leave them open to other kinds of attack besides malware.
3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't necessarily been tested by Apple, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
☞ It can easily be disabled or overridden by the user.
☞ A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
☞ An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
Apple has so far failed to revoke the codesigning certificates of some known abusers, thereby diluting the value of Gatekeeper and the Developer ID program. These failures don't involve App Store products, however.
For the reasons given, App Store products, and—to a lesser extent—other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. Sandbox security is based on user input. Never click through any request for authorization without thinking.
4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is effective against known threats, but not against unknown ones. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
5. The built-in security features of OS X reduce the risk of malware attack, but they are not, and never will be, complete protection. Malware is a problem of human behavior, and a technological fix is not going to solve it. Trusting software to protect you will only make you more vulnerable.
The best defense is always going to be your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "Trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and the scam artists. If you're smarter than they think you are, you'll win. That means, in practice, that you always stay within a safe harbor of computing practices. How do you know when you're leaving the safe harbor? Below are some warning signs of danger.
Software from an untrustworthy source
☞ Software of any kind is distributed via BitTorrent, or Usenet, or on a website that also distributes pirated music or movies.
☞ Software with a corporate brand, such as Adobe Flash Player, doesn't come directly from the developer’s website. Do not trust an alert from any website to update Flash, or your browser, or any other software.
☞ Rogue websites such as Softonic and CNET Download distribute free applications that have been packaged in a superfluous "installer."
☞ The software is advertised by means of spam or intrusive web ads. Any ad, on any site, that includes a direct link to a download should be ignored.
Software that is plainly illegal or does something illegal
☞ High-priced commercial software such as Photoshop is "cracked" or "free."
☞ An application helps you to infringe copyright, for instance by circumventing the copy protection on commercial software, or saving streamed media for reuse without permission.
Conditional or unsolicited offers from strangers
☞ A telephone caller or a web page tells you that you have a “virus” and offers to help you remove it. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
☞ A web site offers free content such as video or music, but to use it you must install a “codec,” “plug-in,” "player," "downloader," "extractor," or “certificate” that comes from that same site, or an unknown one.
☞ You win a prize in a contest you never entered.
☞ Someone on a message board such as this one is eager to help you, but only if you download an application of his choosing.
☞ A "FREE WI-FI !!!" network advertises itself in a public place such as an airport, but is not provided by the management.
☞ Anything online that you would expect to pay for is "free."
Unexpected events
☞ A file is downloaded automatically when you visit a web page, with no other action on your part. Delete any such file without opening it.
☞ You open what you think is a document and get an alert that it's "an application downloaded from the Internet." Click Cancel and delete the file. Even if you don't get the alert, you should still delete any file that isn't what you expected it to be.
☞ An application does something you don't expect, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
☞ Software is attached to email that you didn't request, even if it comes (or seems to come) from someone you trust.
I don't say that leaving the safe harbor just once will necessarily result in disaster, but making a habit of it will weaken your defenses against malware attack. Any of the above scenarios should, at the very least, make you uncomfortable.
6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it—not JavaScript—in your browsers.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the address bar with the abbreviation "https" when visiting a secure site.
Stay within the safe harbor, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself.
7. Never install any commercial "anti-virus" (AV) or "Internet security" products for the Mac, as they are all worse than useless. If you need to be able to detect Windows malware in your files, use one of the free security apps in the Mac App Store—nothing else.
Why shouldn't you use commercial AV products?
☞ To recognize malware, the software depends on a database of known threats, which is always at least a day out of date. This technique is a proven failure, as a major AV software vendor has admitted. Most attacks are "zero-day"—that is, previously unknown. Recognition-based AV does not defend against such attacks, and the enterprise IT industry is coming to the realization that traditional AV software is worthless.
☞ Its design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere. In order to meet that nonexistent threat, commercial AV software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
☞ By modifying the operating system, the software may also create weaknesses that could be exploited by malware attackers.
☞ Most importantly, a false sense of security is dangerous.
8. An AV product from the App Store, such as "ClamXav," has the same drawback as the commercial suites of being always out of date, but it does not inject low-level code into the operating system. That doesn't mean it's entirely harmless. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
An AV app is not needed, and cannot be relied upon, for protection against OS X malware. It's useful, if at all, only for detecting Windows malware, and even for that use it's not really effective, because new Windows malware is emerging much faster than OS X malware.
Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else. A malicious attachment in email is usually easy to recognize by the name alone. An actual example:
London Terror Moovie.avi [124 spaces] Checked By Norton Antivirus.exe
You don't need software to tell you that's a Windows trojan. Software may be able to tell you which trojan it is, but who cares? In practice, there's no reason to use recognition software unless an organizational policy requires it. Windows malware is so widespread that you should assume it's in everyemail attachment until proven otherwise. Nevertheless, ClamXav or a similar product from the App Store may serve a purpose if it satisfies an ill-informed network administrator who says you must run some kind of AV application. It's free and it won't handicap the system.
The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have all the disadvantages mentioned in section 7.
9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
10. As a Mac user, you don't have to live in fear that your computer may be infected every time you install software, read email, or visit a web page. But neither can you assume that you will always be safe from exploitation, no matter what you do. Navigating the Internet is like walking the streets of a big city. It's as safe or as dangerous as you choose to make it. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. Nothing can lessen the need for safe computing practices.

How to stop working of called program

Hi ,
I have called one class , but after some operation i want to stop its work . how can i do that? my code is
if(events.getSource()==tmppnlmenu.btnAdd_product||events.getSource()== tmpGUIMenu.mnuproducts_Add )
          ProductTable objProductTable = new ProductTable(tmppnlmenu.tblProduct,tmppnlmenu);
          operation(tmppnlmenu.tblProduct,1,1, cust.intProductCount);
          objProductTable = null;
I tried with null , but not get success? pls help me
--harish

One way to do it is to have a special method in the class that you want to stop that you can call to have methods in that class stop running. The called method would set a switch that the other classes could test to see if they are to stop.
objProductTable.stop();
Where stop() is a method you code that sets a switch.

How to block a number from getting thru

I have been getting spam calls and want to block that number - anyone know how to do that on a droid X

Log into your Verizon account. Under the HOME tab is a Block numbers option

How to stop robodial scam calls

Will the spam blocker help me?
Yesterday about 8:30EST I started getting calls form people saying they were contacting me about a payday loan that I'd applied for. I told the first caller I never applied for any such loan and hung up. I wouldn't answer the call from the second mystery number, but I got the company name (bogus I'm sure) and told them to remove my number from their list.
After the 7th call (rather, the 7th new mystery number - some numbers dialed me twice) I called and begged Verizon for help. All I could do was block 5 numbers, then pay $5/mnth to block 20 more. I declined as I'd already passed 5 and had the feeling more were coming. The only help they offered was to suggest I change my number or not answer (in case some were international, and then VZ would bill ME for the call) and the calls would eventually stop.
So 21 calls later I contacted the police for help. They said they could take a police report but thats it because they could only investigate land lines. They also said to answer the calls and tell each one I've informed the police and they'd probably stop. I did that last night around 8pm and today I'm up to 37 calls. I called VZ again yesterday evening and asked again if there was anything I could do and they again suggested I pay to block 20 more lines. But at that point I was already up to 28 (again, that's 28 unique numbers, some called several times), so I figured, why bother?
I added AVG security app to my phone so I could block any amount of calls, but of course the calls still initially come through. And it just hangs up on them, so if you're on another call, it'll hang up on that one too. I've disabled AVG and am desperately looking for another solution. I'll try the robospam blocker and see if that helps. Thanks.
>>Branched from an earlier discussion<<
Message was edited by: Verizon Moderator

Of course, I got my first spam call on my phone in over a month the day after posting this... It wasn't one of those robodial recordings though.

How to stop the counter after getting maximum amplitude from a waveform graph?

I am using accelerometer, optical encoder and daq card (PCI MIO 16XE10) for my tyre balancing project. Basically i am trying to stop my edges count from the optical encoder to get the position for putting the mass for correcting the balancing. Could anyone please help me by telling me how i can achieve it or is there any other ways to get the position using the daq card? One more thing, could anyone tell me how to change the waveform graph to frequency domain instead of time domain?

Time to Freq is easy. 1/time = freq. example. 1 msec period = 1000 hertz (1kHz).
I guessing you are attempting to design a new spin balancer for tires. I would record the entire "spin cycle with index count" then search the resulting waveform for the max amplitutes. Correlate the indexes and that should give you the high point and location. You might want to count the number of revolutions, then grab that 60% of that number of peaks.

HT201401 How to stop iphone from calling people randomly day and night

My phone keeps going to voice control and calling random people nigh ad day ań idk how to fix this can u guys plz help me

Standard troubleshooting...
1. Remove apps from the Recently Used (multi-tasking) list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Swipe up on the app preview card to remove it from the list
- Press the home button when done.
2. Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
3. Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
4. Restore with your backup.
5. Restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue.

How to stop sales companies calling ?

I get 3-4 calls a day on my skype number of someone trying to sell me something or put me in a lucky draw, please can anyone tell me if there is a way I can block these numbers and calls ?
(I did search the forums - honest !)
Thanks
Mivazo

h2oholidays wrote:
1. is there no policy or option in skype to block unwanted sales companies ?
2. Sorry but I can't find "tools". I'm using windows 7.
Hello Zoë
1. Unfortunately not. It wouldn't be possible for the system to differentiate between a genuine business call and an unwanted sales call.
2. In Windows 7 go to your Skype window and at the top you'll find a series of options. "Tools" is fifth from the left.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

How to stop SubmitDiagInfo from "Calling Home"?

I do not consent to "SubmitDiagInfo" collecting and sending information without my knowledge or consent. The OSX diagnostic reporting, called "SubmitDiagInfo" is now regularly "calling home" without my knowledge and i do not consent to this. Please tell me how to turn this off. I had consented a few times to submit one-off crash reports, thought i was being helpful to Apple, but now the tool is regular collecting information and sending in secret. I will never assist Apple in the future in bug reporting because of this breach of trust. Thank you.

The application firewall i am using pops up an information windows that tell me what application is accessing the internet, the URL, ectera. Download an application firewall and see it for yourself. If you are security conscious you will find a number of security issues on your machine that you were not aware before, did not authorize, etctera.
Since this post i have documented a number of Apple applications/services that try to "Phone Home". You have to be naive to believe that your Mac only contacts Apple when you tell it to do so. It is similar to what i have documented on Windows machines. Over the past 5 years i have noticed that this "Phone Home" phenomenon increases with every next version of the OS or update. I am new to Macs, but on Windows machines, even the NTKernal will now occasionally try to contact Microsoft servers. An OS kernal has no business doing this kind of stuff. I have even observed where arbitrary ports are being used, not the typical port 80, port 443, etcetera. I thought i had spyware on my machine. Nope. On Windows NT/2000/XP, it appears Windows even has a hidden service that periodically does a type of Win32 memory injection to hi-jack other applications and use them as proxy to "phone home", always to Microsoft servers. Sounds crazy, but i have witnessed it many times over the years. Even some open source software such as Firefox is guilty of doing this kind of thing. Firefox does the "phone home" during a webpage request. What it does is initiate webpage request, interrupt and "call home" to one of several Mozilla servers, then re-initiate page request and continue. Very sneaky.
I have even observed where servers out on the internet such as Google will try to connect to my computer using a variety of ports other than standard internet ports. Sorry, you should not need anything but port 80 to use Google and surf the internet. Use a good application firewall and you can observe this yourself.
I think everybody who takes privacy seriously should start looking into this. Where is the security community on this? It appears to be compromised, talks about everything else but this elephant in the room that i have witnessed the past 5 years. The prevailing propaganda is that this is all benign. I program software for a living and know you do not need to code software that makes regular connections with servers on the internet without user knowledge and explicit consent. This is unethical and possibly a common law crime.
Anyways, it appears that this "Phone Home" phenomenon is "by design". Fortunately there are products out there that allow you to deal with it. Unfortunately it is only a quick fix, it does not resolve the underlying security issue.

How to stop RMA'ing and get a NEW device?

I just got my laptop another RMA for service due another major hardware failure. This will be the third RMA since I purchased it in May of last year.
I am active duty military and basically live out of my luggage/in hotels/on my laptop due to having a job that requires over 50% of the time traveling. I am a prior MSI customer (this laptop replaced my old MSI) and feel like I have a lemon.
I can't complete the rest of my college course, can't stream to my followers on Twitch.tv, and can't even Skype my family anymore due to having to wait a few more weeks to get my device back.
In my opinion, I think it would be best to reach out to a manager or someone at MSI and have them understand that I am not their typical gamer/user and request a completely new device.

Quote from: Mooha182 on 14-January-15, 09:40:10
I just got my laptop another RMA for service due another major hardware failure. This will be the third RMA since I purchased it in May of last year.
I am active duty military and basically live out of my luggage/in hotels/on my laptop due to having a job that requires over 50% of the time traveling. I am a prior MSI customer (this laptop replaced my old MSI) and feel like I have a lemon.
I can't complete the rest of my college course, can't stream to my followers on Twitch.tv, and can't even Skype my family anymore due to having to wait a few more weeks to get my device back.
In my opinion, I think it would be best to reach out to a manager or someone at MSI and have them understand that I am not their typical gamer/user and request a completely new device.
if oyu just bought laptop recently then store is quilty to let you have re-placement within a limited time idk limit it's diffirent per country but in sweden you can have laptop re-placed to new one within 2 weeks and if you havent you wil only be allowed to have it sent to repair and if that wont solve it or new issue comes up and you send it off 2nd time and a 3rd problem comes and you dont want to rma it again then here in sweden law states your allowed to have laptop re-turned completely have have money back so you can either buy new one from same store or buy new one some where else.
I had to RMA my GS70 once then it returned but it had gpu issue and i had to RMA it shortly again after it got back but then a friend helped me to get store to buy it back by cancelling the bill and then i could buy new one from more trusted and bigger company which now i have had 2nd GS70 without any issue so i had simply more bad luck with other one while this one is more lucky

How to stop order lines from getting scheduled

Details of the issue:
OM: Auto Schedule profile option is set to No and Auto schdule check box at order type is not checked, still orders are getting scheduled upon booking. We are on R12
Please provide any inputs you may have
Thanks

Check if the profile options have a different value at the user / responsibility level.
Also check if you have any defaulting rules that populate the scheduled ship date.
Check if the order workflow has a step that does scheduling.
Check if the "Schedule Orders" program is scheduled to run every x minutes.
Sandeep Gandhi

How Does One Stop Telemarketer Calls?

I would like to know how to stop telemarketers from calling. I am and have been on the National Do Not Call List and have an unlisted number, yet we have been getting calls all throughout the day and night. I thought the government stated no one is allowed to call someone on the Do Not Call List or they could be fined, yet the calls are recorded with garble or music, so how can anyone do anything? If you call Verizon, they state they are allowed to call between the hours of 9-5 or something like that, but I am on the Do Not Call List, so they are not allowed to be calling, yet they do. I file the complaints with the National Do Not Call site, but I don't know what else to do. I even asked the Ellen DeGeneres & Anderson Cooper show to try and help. How can these places be fined when they can't even be stopped?
Can this be linked to unlimited phone access where these telemarketers are calling and then somehow connecting to your number to make free calls or something else??? Otherwise what is the purpose of them calling and only having music or garble play?
For instance (without listing their numbers), on 2-21-13, the same number called me at 3:31, 3:42, 3:53, 4:05, 4:33, 5:05, 8:45 and 8:47 at night and that is just the ones I marked down for that day - there could have been more.
Then today, one number called at 10:45 and 11:04, and then another one called at 11:51, then another called at 12:15, then another called at 12:19 & 12:53 and then again at 5:35 pm, and then another called at 2:45 and 3:01, and then yet another one alled at 3:38 pm...and the last one SO FAR was the one at 5:35 pm. I could have missed marking some down too, so there could possibly be more.
This is crazy and shouldn't be allowed since I thought the National Do Not Call List was made for this reason to protect this from happening to us. Is it just Verizon or maybe unlimited access customers or what???
Any suggestions??? Thanks.

definetely set yourself up on the www.donotcall.gov website as mentioned earlier, also Opt out of verizon marketing by calling - 866 483-9700
and also visit www.verizon.com/privacy and opt out of the following:
How to Limit the Sharing and Use of Your Information
Your Choices
Customer Information:You may choose to opt out of the sharing of specific customer information, within the Verizon family of companies for certain marketing purposes.
Read more
Telemarketing:You may request to be removed from the Verizon telemarketing lists at any time.
Read more
Marketing Email, Postal Mail and Door-to-Door Calls:You may opt out of receiving marketing-related emails, text messages, or postal mailings or prevent door-to-door marketing.
Read more
Information Used for Online Advertising:You have choices about whether certain information collected on websites, including Verizon's, is used to customize advertising based on predictions generated from your visits over time and across different websites.
Read more
Wireless Location Services:Verizon Wireless services that use mobile device location data provide you with notice about the collection and use of this data as well as choices about whether specific location-tracking features available on your phone are turned on.
Read more
FiOS TV Services:Specific cable-related privacy protections apply to Verizon's FiOS TV subscribers.
Read more
Geographic and Relevant Mobile Advertising:Verizon wireline Internet access customers may opt-out of participating in certain geographically-based advertising programs. Verizon Wireless Internet customers may opt-out of participating in relevant mobile advertising programs.
Read more
Business and Marketing Reports:Verizon Wireless customers may opt-out of allowing Verizon Wireless to use their information to create aggregated business and marketing reports.
Read more
Parental Controls:Age-based content controls are available for parents of Verizon's Internet, Wireless and TV services.
Read more
Information SecurityVerizon has technical, administrative and physical safeguards in place to help protect against unauthorized access to, use or disclosure of customer information we maintain.
Read moreContact InformationIf you have questions, concerns or suggestions related to our Privacy Policy or our privacy practices, you may contact us at:
Verizon Privacy Office
1320 North Courthouse Road
9th Floor
Arlington, VA 22201
Fax: 703-351-3669
Email: [email protected]

How to stop the message "press 1 for ..."

Hello, while I'm at it...does anyone know how to stop the instructions that get attached to my outgoing voicemail message? You know, the one that says, press 1 for __, press 2 for __, press * to send a fax.....in my old phone (also with Verizon) it didn't have that message.
Thanks all!

I took this problem to a genius. He removed the SIM card and added a new "blank" card from AT&T. Using this SIM we went to setting an turned cellular data off. Then we put the Apple SIM back in the machine. Now you can turn off the cellular so you will no longer get the messages. To end this practice, sign up with a carrier. Just click the button in the Settings... menu.

"Unknown Caller " issue

I have synced my iPhone with the Outlook. Sometimes, when I receive a call the name of the caller is not displayed, rather "Unknown Caller" gets displayed on the iPhone, while the number is already there in the iPhone's contacts list.

Probably means the caller is withholding their details - whether or not they know they are. They may be ringing from work and the employer's phone system is set up this way. This will apparently override the fact that you have them in your contacts.

Can anyone tell me how to fix this error I am receiving: LabView: File not found. VI "Mobile Display.vi" was stopped at unknown " " at a call to "Mobile Display.vi"?

Can someone help me please? I am receiving this error everytime I attempt to execute my application:
LabView: File not found. The file might have been moved or deleted, or the file path might be incorrectly formated for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
VI "Mobile Display.vi" was stopped at unknown " " at a call to "Mobile Display.vi"
Attachments:
labview error.jpg ‏176 KB

We cannot help without additional information:
Are you running your code
...in the development system?
...as a standalone application?
...deployed to an embedded target?
If it is a built application, do you explicitly include dynamically called VIs in the build specification?
Who wrote the program? Do you have access to the code?
How is this VI called? Is there sufficient error handling?
Do you manipulate paths as strings or as proper path datatypes with the strip path/build path primitives etc.?
Is it running on the same OS used to develop it ...
LabVIEW Champion . Do more with less code and in less time .

How to stop an unknown caller getting thru

Similar Messages

Maybe you are looking for