How to stop and start IGS(internet graphic server)

Hi Techies
How to stop and start IGS(internet graphic server) in Solaries
IGS is 7.0 1patch
Is this the command to stop and start IGS
stopigs and startigs
If this correct will there be any issues if i stop the IGS from the above command
Thank You
Haroon

Hoi Haroon
On base 6.40 there were stopigs/startigs scripts, yes. When we upgraded our systems to 7.0 I encountered the same problem, the igs could be stopped, but not started anymore (externally). Can you check, if the startigs/stopigs-scripts are 7.0 or 6.40.
I then opened an oss and got as answer:
"To start and to stop the igs there's only the offical way by stopping and starting the sap system".
However I found a solution to start and stop:
start:
nohup /sapmnt/<SID>/exe/igswd_mt -mode=profile pf=/usr/sap/<SID>/SYS/profile/<Instaneprofile> &
e.g.:
nohup /sapmnt/P72/exe/igswd_mt -mode=profile pf=/usr/sap/P72/SYS/profile/P72_DVEBMGS01_migzmc10 &
stop:
--> stopigs, therefore the 6.40-stopigs script has to remain in the exe directory.
Hope this helps.
Regards Patrick

Similar Messages

  • How to stop and start process SAPOSCOL

    Hi, i have a problem with write access for saposcol program. I see that the file saposcol is read the file but its unable to wirte the same.
    Collector           : running
    Start time coll.    : Mon May 21 17:49:49 2007
    Current Time        : Mon Jun 11 13:27:51 2007
    Last write access   : Tue May 29 06:23:46 2007
    Last Read  Access   : Mon Jun 11 13:26:24 2007
    When i try to stop the saposcol i get the following error:
    igzadm> saposcol -k
    Setting Stop Flag :
    13:24:44 11.06.2007   LOG: ==== Stop Flag was set by saposcol (kill_collector()).
    13:24:44 11.06.2007   LOG: ====  The collection process will stop as soon as possible
    can't kill process 409656.
    kill: No such process
    ERROR:No reaction from collecting process 409656.
          Please kill collecting process.exes.
    Am doing this command through SID<ADM> from change directory /run.
    Please help me how to check the permission of the SIDADM to stop the services.
    I also try the same from root user but now use..
    Please guide me how to stop and start the SAPOSCOL in AIX 5.3.
    Advance Thanks.
    Suri Tyson

    Hi, i have the following permission for saposcol
    imserv:/ # ps -ef | grep saposcol | more
        root  118842  528422   0 14:02:17  pts/2  0:00 grep saposcol
    I have changed the ownership as you mentioned....
    imserv:/usr/sap/IGZ/SYS/exe/run # ./saproot.sh igz
    Preparing /usr/sap/IGZ/SYS/exe/run/brbackup ...
    Preparing /usr/sap/IGZ/SYS/exe/run/brarchive ...
    Preparing /usr/sap/IGZ/SYS/exe/run/brconnect ...
    Preparing /usr/sap/IGZ/SYS/exe/run/brtools ...
    Preparing saposcol ...
    Preparing icmbnd ...
    done
    However, i still get the error as:
    igzadm> saposcol -k
    Setting Stop Flag :
    14:12:13 11.06.2007   LOG: ==== Stop Flag was set by saposcol (kill_collector()).
    14:12:13 11.06.2007   LOG: ====  The collection process will stop as soon as possible
    can't kill process 409656.
    kill: No such process
    ERROR:No reaction from collecting process 409656.
          Please kill collecting process.
    Now the permission are set in my system as:
    igzadm> ps -ef |grep saposcol|more
      igzadm  729196  983058   0 14:13:25  pts/2  0:00 grep saposcol

  • How to stop and Start ASM in 11gR2

    Hi,
    Any one please let me know the complete process of how to stop and start the ASM instance in
    11.2.0.1 oracle.
    Thanks.
    Ali

    Hi;
    If you need to close ASM than you need to also close database
    You need to close db:
    srvctl stop database -d instance_name
    or
    set ORACLE_HOME and ORACLE_SID
    sqlplus "/as sysdba"
    shutdown immediate;
    srvctl stop LISTENER
    srvctl stop ASM -f
    or see:
    Stop asm instance in standalone database
    Re: Stop asm instance in standalone database
    Regard
    Helios

  • How to STOP and START the BO EXPLORER/POLESTAR - LINUX

    Dear friends,
    Could you please let me know on How to STOP and START the BO EXPLORER/POLESTAR on LINUX platform?
    Thank you,
    Nikee

    Oracle Apex is an API, if that helps you understand / visualize. You do not start Apex process nor stop it.
    When an Apex session starts it starts calling the API.
    You can however start / stop the listener. It may be OHS, ApexListener and the J2EE container running it, OC4J or any other "server" that you are using.
    The built-in EPG is something like an API again, you cannot start / stop it but you can disable/enable it with DBMS_XDB.SETHTTPPORT API.
    Regards,

  • How to stop and start RAC Database

    Hi,
    Can anybody tell me How to stop and start RAC Database.
    Pls give me the exact procedure for OS - IBM Aix 5.3.
    Rajkumar

    Burleson,
    It so appears, as from the numerous times you have been published incorrect, untested information, and non-working scripts, you are not an Oracle guru,
    but only a self-proclaimed one.
    It also appears nothing on your 'CV' can be easily verified.
    You state you are an 'adjunct professor emeritus', however anyone who was kicked out after a few months can call himself a 'professor emeritus'.
    Looking at the enormous amount insults and slander you have posted directed to me and others on this forum, showing a highly unprofessional attitude toward your peers,violating this forums rules of conduct, don't you think you deserved to be banned completely?
    After all, you are always promoting your own publications here, which is also in violation of the rules for this forum.
    What makes you think that "Sybrand" is a man's name? How many male Sybrand's do you know? I don't know any, not one.
    That's your problem. I'm as much as male, as you are a fat, ugly, self-proclaimed Oracle-guru, which you are clearly not, you are only a fraud, and this glares from all of your publications.,
    Sybrand Bakker
    Senior Oracle DBA

  • How to Stop and Start Scheduler Service

    Does anyone know how to stop and start the Scheduler service for Hyperion Financial Reporting in release 9.3.1?

    please see the metalink note
    How to Start/Stop MWA Services Using Control Scripts adstrtal.sh/adstpall.sh? [ID 731320.1]
    This is how i startup and shutdown WMA
    for stopping :
    1) login to Applications tier
    2) To see if the MWA (telnet) server is running use:
    ps -ef|grep DPID
    3) cd $MWA_TOP/bin
    3) ./mwactl.sh -login sysadmin/xxxxx stop_force 10200;
    4) check the wma process from OS level
    ps -ef|grep mwa
    for starting
    1) login to Applications tier
    2) cd $MWA_TOP/bin
    3) ./mwactl.sh -login sysadmin/xxxxx start _force 10200;
    4) check the wma process from OS level
    ps -ef|grep mwa

  • How to stop and start WMA in 11i system

    how to stop and start MWA in 11i system, its Linux server.

    please see the metalink note
    How to Start/Stop MWA Services Using Control Scripts adstrtal.sh/adstpall.sh? [ID 731320.1]
    This is how i startup and shutdown WMA
    for stopping :
    1) login to Applications tier
    2) To see if the MWA (telnet) server is running use:
    ps -ef|grep DPID
    3) cd $MWA_TOP/bin
    3) ./mwactl.sh -login sysadmin/xxxxx stop_force 10200;
    4) check the wma process from OS level
    ps -ef|grep mwa
    for starting
    1) login to Applications tier
    2) cd $MWA_TOP/bin
    3) ./mwactl.sh -login sysadmin/xxxxx start _force 10200;
    4) check the wma process from OS level
    ps -ef|grep mwa

  • How to work in Business Graphies (Internet Graphics Server)

    Hi Friends
       I have some help
    1. How to work in Business Graphies.
    2. How to Configuration IGS (Internet Graphics Server)
    3. How to Increase and decrease that u201CBarcodesu201D depending on our Customer details.
    Like Business Application. Once Business Profit has high that time u201CBarcodesu201D also Increase where as Once Business Profit has low that time u201CBarcodesu201D also decreases.
    Can u tell me?
    Regards
    Vijay Kalluri

    Hi Vijay,
    Refer the below links, can give you a fair idea about using Business Graphics in Portal (WDJ/WDA).
    Using Business Graphics
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3261cd90-0201-0010-268c-d8d72e358af6?quicklink=index&overridelayout=true
    How to Create Business Graphics in Web Dynpro for ABAP
    http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ca932ebc-0901-0010-68a0-b4dd81a4bf81
    Introduction to Web Dynpro Business Graphics in SAP
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/717cae90-0201-0010-a5a4-bbc6713f3779?quicklink=events&overridelayout=true
    Web Dynpro - Using the Internet Graphics Server in Web Dynpro Java
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50c7a90f-21a3-2910-87b5-e1f0e39462ae?quicklink=index&overridelayout=true
    Business Graphics in WD Java Demo
    http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/203df40b-6c7a-2a10-418d-99f87d32d3ca&overridelayout=true
    Check the below URL if your IGS configured or not:
    http://<hostname>:4XX80/
    this should result in 'SAP IGS is running' on browser.
    Thanks,
    MS

  • How to stop and start MDBs to listen for JMS messages

    Hello! This might be more of an architecture question rather than a technical questing, but I post it here, in the lack of a better place...
    For several years I have been using Webster and Webster MQ to send messages back and forth to clients. The architecture for the middleware platform has been designed around the functionality of ListenerPorts. Listenerports is a Webster functionality that let you "stop" and start to listen to JMS messages for a given MDB either by admin console, or by JMX.
    The arhitecture we used was something like this :
    1.Client sends a persistent message to a queue. (order)
    2. An MDB pics up the order message, calls a SessionBean that "fronts" the IIOP back end system.
    This is quite "out of the box" architecture, but we used the Listenerports to solve a stability problem for our back end system.
    The backEnd system was quite unstable, so the EJB threw an exception (typically because of timeout or connection refused) back to the MDB.
    The Listenerport was "defined" to handle 3 errors before stopping, so the MDB resent the message twice before the listenerport automatically stopped. The nice thing about this feature was that the client could continue to send orders, and was not bothered when the back end system was down.
    When the backEnd system was up and running, we could start the listenerport and it was all back to normal state. We even had a start script that checked the state of the listenerport every 30 minute, and started it automatically if it was stopped, making the admin task of starting the MDB unnecessary..
    Now.. Why am I telling this story..
    I would like to know how this could be done using "clean" J2EE technologies..That is..Not using any technology that is not portable..
    I`m playing with glassfish at home, and it struck me that there is nothing in the J2EE spec that defines the functionality described above ? Am i missing something ?
    I Do not want to stop My application because the back end system is down? That is the only way (i know of) that i can "stop" to listen for messages..
    I can put all the messages on an error queue when the backbend system is down, but that would lead to more code just to handle the error messages. Maybe the easiest way to solve this is to "move" (programmatically) all messages from the error queue over to the "standard" queue every XX minute, but somehow that sounds "wrong"
    Can anyone give me some advice to how this problem situation should be solved ? I`m interested in the solution both from an architectural perspective and from a more technical perspective..
    Best regards
    Hans-Jacob Melby

    Breakpoints, whether normal or conditional, are just meant for debugging of your code.  I had the sense from your question that the pausing you want to do is a part of normal operation of your code.  I would NOT recommend using a breakpoint for that situation.  It would bring up the block diagram showing the breakpoint when it occurs.  A user besides the programmer would not know what to do in that case.
     Yes, both the inner and outer loops would have shift registers.
    Putting a case structure with a small while loop inside the "Pausing Case" is doable.  It just depends on what you are doing or waiting for while the program operation is "paused".

  • How to stop and start only the process of Oracle Application Express?

    I'd like to know how to stop the process of Oracle Application Express on my server installed oracle express package.
    After installed Oracle Express edition, not only oracle database server processes but also Oracle Application Express, such as http server, is started automatically...
    I hope to stop and start Application Express on demand but is this feature enabled?

    Oracle Apex is an API, if that helps you understand / visualize. You do not start Apex process nor stop it.
    When an Apex session starts it starts calling the API.
    You can however start / stop the listener. It may be OHS, ApexListener and the J2EE container running it, OC4J or any other "server" that you are using.
    The built-in EPG is something like an API again, you cannot start / stop it but you can disable/enable it with DBMS_XDB.SETHTTPPORT API.
    Regards,

  • How to stop and start (restart) portal services programmatically?

    Hi experts,
    I develop a portal service IMaintenanceService extending IService.
    The new service has some profile properties (start date, end end, etc.).
    I wrote another portal application MaintenanceManager which can change these profile properties.
    However, to activate the changes I have to restart the portal service.
    Does anyone know how I can restart the portal service IMaintenanceService from my portal application MaintenanceManager?
    Thanks for help.
    Edited by: Daniel Fötsch on Nov 21, 2011 8:24 AM

    please see the metalink note
    How to Start/Stop MWA Services Using Control Scripts adstrtal.sh/adstpall.sh? [ID 731320.1]
    This is how i startup and shutdown WMA
    for stopping :
    1) login to Applications tier
    2) To see if the MWA (telnet) server is running use:
    ps -ef|grep DPID
    3) cd $MWA_TOP/bin
    3) ./mwactl.sh -login sysadmin/xxxxx stop_force 10200;
    4) check the wma process from OS level
    ps -ef|grep mwa
    for starting
    1) login to Applications tier
    2) cd $MWA_TOP/bin
    3) ./mwactl.sh -login sysadmin/xxxxx start _force 10200;
    4) check the wma process from OS level
    ps -ef|grep mwa

  • How to stop and start oracle CEP server?

    I want to start and stop oracle CEP server without using eclipse IDE.How can I do it?

    first you need know where the domain is, and then go to the server's directory, run startwlevs.sh or stopwlevs.sh.
    for example, assuming you use helloworld sample, you are at $FMW_HOME/ocep_11.1/samples/domains/helloworld_domain, and then go to the defaultserver directory to run the startwlevs.sh script

  • How to stop and start a wipe effect at a specific place?

    I assume I use the xFrom, yFrom, xTo, and yTo properties. But
    I'm not
    sure I understand how to use them to stop a wipe left effect
    at 20% the
    width of the container and start the subsequent wipe right
    effect at the
    same 20% position.

    Breakpoints, whether normal or conditional, are just meant for debugging of your code.  I had the sense from your question that the pausing you want to do is a part of normal operation of your code.  I would NOT recommend using a breakpoint for that situation.  It would bring up the block diagram showing the breakpoint when it occurs.  A user besides the programmer would not know what to do in that case.
     Yes, both the inner and outer loops would have shift registers.
    Putting a case structure with a small while loop inside the "Pausing Case" is doable.  It just depends on what you are doing or waiting for while the program operation is "paused".

  • How to stop and start Managed Server using weblogicServer

    Hi
    We are new.
    We have 2 managed servers and an Admin Server.
    We're trying to use the command line to stop/start our Managed Server.
    Could someone share examples on how one could write the command line that's similar to the WLS console Server Start tab ?
    We have a couple of classpaths and a bunch a arguments;
    When we tried to start one of the managed server it defaults to use some other settings as opposed to the ones in Server Start tab.
    What did we do wrong ?
    Thanks

    Hi,
    Follow the below links,each n every links have various methods and example for starting and stopping of Weblogic services
    We have 2 managed servers and an Admin Server.
    We're trying to use the command line to stop/start our Managed Server.http://docs.oracle.com/cd/E15523_01/core.1111/e10105/start.htm#CIHBIGCD
    We have a couple of classpaths and a bunch a arguments;http://docs.oracle.com/cd/E13222_01/wls/docs90/admin_ref/weblogicServer.html#frequently_used_optional_arguments
    http://docs.oracle.com/cd/E13222_01/wls/docs90/admin_ref/weblogicServer.html#1008628
    Regards
    Fabian

  • How to stop and start a for loop

    I've got code and a for loop running in a while loop.  What I need to do is simply pause the operation of the for loop until an requirement is met, and but maintain its iteration position throughout each pause interval (not necessarily timed, just paused until the next requirement is met).  I've tried wiring a boolean to the "continue if true" terminal of the for loop, but the iteration count restarts to 0 when the loop is started again.  Is there a way to stop the for loop, and continue at the particular iteration it is at?
    Solved!
    Go to Solution.

    Breakpoints, whether normal or conditional, are just meant for debugging of your code.  I had the sense from your question that the pausing you want to do is a part of normal operation of your code.  I would NOT recommend using a breakpoint for that situation.  It would bring up the block diagram showing the breakpoint when it occurs.  A user besides the programmer would not know what to do in that case.
     Yes, both the inner and outer loops would have shift registers.
    Putting a case structure with a small while loop inside the "Pausing Case" is doable.  It just depends on what you are doing or waiting for while the program operation is "paused".

Maybe you are looking for

  • Modify view object at responsibility level

    Hello, One of our business requirements is to change the drop-down values for several list of values based on the responsibility the user is logged in with. For example when creating a new application, the LOV 'Country' needs to list certain countrie

  • Help.jsp web app war file (how to exclude resources)

    Hi, I am making a jsp/JSF application and now wanted to deploy it on a glassfish server. this is the first time i am deploying so am still learning it as i go. I wanted to clear out something before i go ahead. My application has tons of resuorce fil

  • Hiii friends! how attached output type to a transaction

    Hi gurus! how to attached output type to a transaction. for eg - i have created a outout type zexpt and i have to assigned to transaction VF01. Regards, Rahul

  • Third party integration

    Hi, We have a requirement wherein we want to open header of contract document directly from a third party application by generating the dynamic URL of the header. Any idea how we can achieve this? Regards, Puneet

  • Calendar syncing problems with outlook and iphone

    Months and months ago I had the following window pop up when I go to sync my phone: "synching with iphone will change more than XX% of your calendars" First I have to say the vagueness of Apples messages is disappointing.  This message does not conve