How to stop cancellation of cleared invoice?

Currently the SAP SD system is allowing the users to cancel the cleared invioce, which is not according to the companies business policy.
How can I stop that, if user try to cancel the cleared invoice system should give an error message and stop.
I am using standard billing type "F2" for invoice and "S1" for cancellation.
I have also checked the "Copying control: Billing document to billing document" but could not find any control which is
Target "S1" AND Source" F2".

Hi
In VOFA for your billing type  ( not in copy controls ) in the cancellation tab assign Routine 029 in copying requirements
This will make sure a cleared invoice does not get cancelled
Regards
Raja

Similar Messages

  • How to stop/cancel Process Chain in BI 7.0

    Hi,
    Could you tell me how to stop/cancel a process chain that hangs with status yellow or green in BI 7.0? There was an easy option to do it in 3.x, but I cannot find a similar option in 7.0.
    What happens is that at random our process chains hang at a certain variant with either yellow or even green status and do not proceed further. What happens is that in a couple of hours another pchain run occurs and it executes fine. Then again at random (might be the same day or the next day) the process chain hangs again. I think that all those "hanged" pchains pile up in the queue, so that it cause other future pchains to hang as well at some point. So, is there anyway to stop/cancel these zombie process chains when it stops at a particular event RSPROCESS in BI 7?
    Thank you,
    AG
    Message was edited by:
            AG

    Hi Frank,
    Thanks for your reply. I have a few questions.
    1)SM37 -->Kill Job
    We cannot do that because the job has already finished.
    2)SM50/sm66- ->Kill process
    There are no hanged processes to kill
    3)RSPC>Job Log>Make the process RED forecefully
    How do you do that exactly?
    4)RSPC>Process chain> main Menu"Remove from Scheduling"  OR
    5)se37-->RSPC_API_CHAIN_INTERRUPT
    give RFC BW system name(technical) and process chain name(technical) - we can do this,  but what exactly would it accomplish. Would it remove the process chain from any runs in the future or also any hanged ones in the past? An how is this step different from #4?
    Thank you,
    AG

  • How to stop creating mutiple performa invoice from delivery document

    case -
    i am creating stock transfer performa invoice on the basis of stock trf purchase order and delivery document. i want to stop creating multiple performa invoice.
    Mukesh Kumar

    If your requirement is to generate a certain output automatically only once for a certain document, you can set it for the output type in  transaction NACE (for example - NACE --> select the application --> "Output types").
    There's a "Multiple issuing" indicator (VN_T685B-MEHRF) through which you can control the desired behaviour.
    Edited by: Csaba Szommer on Jul 28, 2010 1:40 PM
    Sorry, I misunderstood your question...please neglect the suggestions above...
    As per SAP online help there's no limitation how many proforma invoices can be created from one delivery / sales order:
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/dd/5610c9545a11d1a7020000e829fd11/frameset.htm
    If you want to restrict this, I think you should follow KC's suggestion and modify your copy control routine.
    Since in standard system this function does not exists you won't find suitable copy routine. That's why - in my opinion - you should use the same copy routine which has been set till now - you just have to modify it (add an ABAP code to check whether proforma invoice is already created or not; maybe you can check the entries in table VBFA)
    Edited by: Csaba Szommer on Jul 28, 2010 1:46 PM

  • Hi Help me it's urgent..how do i cancel open AP Invoice

    We have an AP invoice. For that outgoing payment, we have used the Outgoing payment transaction, we had canceled outgoing payment and it was canceled but now how to cancel the AP invoice which is opened.
    Message was edited by:
            mohan murali

    Hi Mohan,
    An Invoice cannot be canceled directly.
    In order to close an open Invoice, create a Credit Memo, which is fully based on that Invoice.
    Regards,
    Goor

  • Error Message for Cleared Invoice Cancellation

    How to explore if standard SAP functionality exists to configure either a soft or hard error message be delivered when an attempt is made to cancel a cleared invoice (VF11).
    If standard SAP do not support how would I achieve this functionality, through enhancement? If so please guide me.
    Thanks & Regards,
    Victor

    Dear Victor,
    Try this,
    This may possible through copy control settings between delivery and billing document.
    Go to VTFL transaction select your delivery type and billing type then go in to the item details by selecting itemcategory here you maintain copying routine 29 -Cancel Header Clear. in Copying requirements field.Through maintainimg this routine, you cannot cancel the billing document
    if the Accounting Document is cleared for that billing document.
    I hope this will help you,
    Regards,
    Murali.

  • How to cancel the Excise Invoice after Delivery Cancellation

    Hi,
    We are facing a Problem in Cancel Excise Invoice through J1IJ...
    By mistake, enter the amount in Excise Invoice was correct, so we reverse all the document i.e. Billing, Delivery BUT Skip the Excise Invoice.
    Now after Delivery cancellation, How can we cancel the Excise Invoice...
    Please guide...

    Hi,
    As a standard process J1IJ docuemnt must be reversed before you reverse the delivery. Else you will not be able to reverse J1IJ as delivery will no longer be available.
    You will have to come out of the error in debug mode by taking help of your ABAPer
    The logic for cancellation can be seen in the program SAPMJ1IJ subroutines CANCEL_DELIVERY.
    The tables to be updated are;
      1. J_1IEXCDTL
      2. J_1IRG23D
    Take the help of a technical consultant to update the tables according to the logic in subroutine CANCEL_DELIVERY.
    I suggest try this in DEV/TEST system before doing the same in PRD.
    Regards,
    Brinda

  • Cancellation of Excise invoice after MIRO

    Hi Everybody,
    How do i cancel the Excise Invoice after MIRO.my scenario is Net Inclusive of Excise duty. the procedures which i followed as follows,
    1.PO with Zero Tax code > J1iex(captured the Excise Invoice)>GR which refers EI>Posted EI.
    After posting EI i found thats wrongly captured then i did canceled the EI as follows
    2. GR Cancellation>Posted EI against canceled GR>Canceled the EI.
    Now my RG23A got cleared.then i did again step 1 as well as MIRO.After did miro again i found that captured EI is Wrong. I have to followed below procedure to Cancel the EI,
    3.Cancell the MIRO document in MR8M>GR Cancellation>Posted EI against canceled GR>Canceled the EI.
    When i tried to POST EI one pop up message is coming i.e status of EI one is for INPROCESS another one one is for Posted .I chose Inprocess and entered i was getting following Error
    No Part I exists for availing credit in excise invoice 364 2008
    Message no. 4F112
    If i Chose POSTED i was getting following error,
    Excise invoice 364 2008 has already been posted for vendor 103769
    Message no. 4F107.
    Can anybody tell me where i'm wrong what  procedure i need to follow
    Regards
    Govindaraj

    hi
    plz check the document year for inprocess and posted doc
    now steps for excise invoice cancellation will be as follows
    1  cancel MIRO document with MR8M
    2  cancel MIGO document in MIGO
    3 goto J1IEX choose post here give the excise invoice no of the document (u will get this no from table J_1IEXCDTL and field DOCNO)
    4 now in misclinious tab give the rejection code and simulate u will find all the duties are reversed (compare with previous posting)
    5 now ur invoice is cancelled and u can go for new GR and new postings
    regards
    kunal

  • Cancel the excise invoice in Intra company stock transfer

    Dear Gurus,
    I have one issue in CIN.
    The following are the my sequence of operation.
    Intra company stock transfer.
    1. Purchase order with UB. (from plant A)
    2. Delivery ( from plant B),
    3. PGI ( from plant B),
    4.Excise Invoice ( from plant B to A),
    5. Billing ( from plant B),
    6. Creating Excise Invoice without purchase order Manually (from plant A),
    after PGI and Before MIGO.
    7. MIGO.
    Now i want to cancel the Excise invoice in Plant A.
    how can i cancel the excise invoice.?
    kindly provide the valid information.
    Thanks.
    Best Regards
    Anbu

    In T.Code: J1IIN, there is an option of deleting / cancelling the Excise Invoice. On the top most left hand side (after entering the Excise Invoice number) select Excise Invoice --> Cancel / Delete.
    Here it is possible to cancel the Excise Invoice.
    Regards,
    Rajesh Banka

  • Cancellation of a cleared invoice

    Hi Friends ,
                      My system is allowing a cleared invoice to be cancelled . I don't want that to happen . How can I do that ?
    Regards
    Mahesh .

    Hi,
    You check with technical person ABAPER.
    Or you can check with Basis team member.
    If it is useful reward points.
    Regards,
    Srinivasa Reddy

  • Difference between billing and invoice?  How to stop PGI?

    can u please help me in these questions.
    Difference between billing and invoice?  How to stop PGI?

    Invoice is document indicating to delivery goods and Billing is a receipt of payment
    Tables are VBRK & VBRP. For flow, go to transaction VF03, enter document number and hit 'Display Document Flow' button on toolbar
    vbrk and vbrp holds billing/invoice details..
    Billing Document:
    Generic term for invoices, credit memos, debit memos, pro forma invoices and cancellation documents.
    The tables are VBRK and VBRP.
    2)-- once u do PGI the delivery document will be created . there is no way to stop it  .. the thing u can to do go to the list of created deliveries in VL09.. select the delivery doc which u created.there  u have the option of reversing the goods or canceling it.
    let me know if i am wrong...
    thanks,
    madhan
    Message was edited by:
            madhan n

  • Cleared Invoice should not allow to cancel.

    Dear All
    I have posted one invoice with reference to sales order. My finance team also cleared that invoice. Now System is allowing me to cancel the invoice document.But i dont want to allow people to cancel cleared invoice.
    How to achieve this. Kindly suggest me.
    Shobana

    Hi lakshmi
    I have done as per your suggestion.It is working fine for fully cleared invoice. But i want the same restricition to partially cleared sales invoice also. Is there any provision is available.
    Kindly guide me.
    Thanks
    Shobana

  • How we can cancel the invoices those have been released to accounting ?

    Hi,
    How can we cancel the invoices those have been released to accounting? The observation here is since the net value is zero SD is setting the invoices to cleared status. 
    Regards,
    Shrihari M

    FBRA u201CResetting & reverseu201D:  If you want that  cleared accounting document becomes an open item again in customer/vendor account.
    For example:  Have problems with such as payment run and you want to re-do the payment run procedures.  But before you reverse the cleared document, find out how was that document u201Cclearedu201D, via customer payment or credit note?  Or re-assess the reasons of reversing the SD generated billing.

  • When I access my google e-mail account on the I-pad my inbox has at least 6 e-mails with no sender and no subject (absent via I-phone, Mac or PC) I cannot delete them as they cannot be selected- how do I stop them and clear the ones there now?

    When I access my google e-mail account on the I-pad my inbox has at least 6 e-mails with no sender and no subject (absent via I-phone, Mac or PC) I cannot delete them as they cannot be selected- how do I stop them and clear the ones there now?

    Try turning the account off and on : Settings > Mail, Contacts, Calendars , then tap the account on the right, slide Mail to 'off', exit settings and go back into the Mail app, and then go back to Settings and slide Mail back to 'on'
    If that doesn't work then try closing the Mail app completely : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    Also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • How to check Cancelled invoices

    Hi Gurus,
    Can anybody please let me know how to check cancelled invoices in costing. Also please let me know the importance of VBRP table in costing. Thanks.
    Regards,
    S.Sumana.

    HI
    VBRK-FKSTO field can be used to check the cancelled invoices,
    If you mark this field as X  then you can get the list
    Thanks
    Prashant

  • How to stop the Flex application when user clicks on Cancel button from JS-confirm message?

    Hi All,
    I use the next code when a user clicks on a link:
    private function clickHandler():void
          ExternalInterface.call('confirm', 'Of course you want to go to the Adobe forums!');
          navigateToURL(new URLRequest('http://forums.adobe.com'), '_self');
    This will show up the javascript confimation box. But when the cancel-button is clicked, the user goes straightly to http://forums.adobe.com...
    How to stop Flex performing the next code when a user clicks on the Cancel button?
    Or, how to catch which button is clicked by a user in Flex?
    Thanks!

    I agree with Mr. Hall that using mx.controls.Alert in Flex may be a better route.
    Show the Alert like this:
    // show an alert with a question and yes and no choices
    Alert.show( "Would you like to go to the Adobe Forums?", "Question",
         Alert.YES | Alert.NO, this, closeHandler, null, Alert.YES );
    Then handle the response in the closeHandler() function:
    protected function closeHandler( closeEvent:CloseEvent ):void
    if( event.detail == Alert.YES )
         navigateToURL( new URLRequest('http://forums.adobe.com'), '_self' );
    else if( event.detail == Alert.NO )
         // they chose no
    The following documentation on Alerts may be helpful:
    http://www.flexafterdark.com/docs/ActionScript-Alert
    Let me know if that helps...
    Ben Edwards

Maybe you are looking for