How to stop Setup

Hi all,
I've got an Air, and while trying to setup Bluetooth - the machine has restarted and is asking me to enter setup, etc. How do I exit? I don't want to re-setup my Air.
Thanks.

Is it the HP Image Zone software? Go to ImageZone>Devices>Device Options>Uninstall AiO Software.
Printer software has to be uninstalled, not just deleted. If what you have is different, you might need to go to the HP site and find out how to uninstall it.
Good luck!

Similar Messages

  • How do I setup hotmail to utilize IMAP in Mac Mail OSX 10.6?

    How do I setup my OSX 10.6.7 Mail program to run Hotmail through IMAP without the installation of seperate programs?
    I know the software has the capabilities but I cannot figure out how to add the account in manually without it doing it automatically without the option to add it manually.
    Please help.
    *Please do not recommend installing other apps, as I am not interested in that.*
    Thank you.

    I don't know how to configure hotmail, you'll have to ask them.
    I also don't know if this will work with a hotmail account, but you can stop the automatic account creation by holding down the option key when you click the Continue button in the Mail account setup.  From there, you can manually create an IMAP account using the hotmail servers.

  • How to stop automatic mail contacts syncs in iphone 3gs ?

    Hi Team,
    i am using iphone 3gs (ios 5),i setuped gmail,yahoo,exchage,etc mails in phone,
    all my maill contacts are getting saved in my phone as contacts
    i don't know how to stop it,also i want to remove all mail contacts,
    let me know
    Thanks,
    Saravanan

    You can't you either set it up as a new phone and then set up all the settings again and then sync your contacts, calendars and photos. Then manually select the applications you want to include
    OR
    Restore your device using a previous backup

  • How to stop Mail from downloading automatically even it is set not too

    My mail programme preferences are set to download manually.
    In advanced, the account is not 'included in automatically checking for new mail'
    I use scripts to send mails after certain tasks are ready. Sometimes (randomly) mail all of a sudden downloads all mail.
    Anybody know what could cause this?
    How to stop it as I do not want it to download mail at all as I use an other programme for reading and writing mail.

    Hi Mulder
    What you're describing doesn't make sense. Mail doesn't download mail if it's set to wait for a manual initiation.
    I know however...
    But once that is check is initiated, any and all waiting mail will be downloaded.
    I know.
    I've never heard of this happening before, to anyone. Unless your preferences are corrupted, which there's no indication of at this point, something else is triggering Mail to check for new email.
    I never heard either, hence posting
    But if you're using some other program for sending and receiving email, why would you have that account setup in Mail, as that would defeat the purpose of supposedly using that other program. If you really want to eliminate the possibility of this happening, you would need to delete that account in Mail, and backup the mail for that account before you delete it.
    complex issue, but rather keep both programmes.
    Otherwise, we need more details, including which version of Mac OS X you're running, and the other program that you're using for email.
    OS 10.5.5
    Mail 3.5
    other programme Entourage

  • How do I setup a catch-all account for a email account

    I have hundreds in fact thousands of email accounts from one domain. How do I setup a single account to download all the emails from orangehome.co.uk, eg. [email protected], [email protected] etc.

    ''rhogg4768 [[#question-1040523|said]]''
    <blockquote>
    I have hundreds in fact thousands of email accounts from one domain. How do I setup a single account to download all the emails from orangehome.co.uk, eg. [email protected], [email protected] etc.
    </blockquote>
    I have a similar situation with multiple accounts on a freeserve domain. This all worked fine up with Thunderbird up until about a month ago - not sure exactly when it stopped retrieving any mail apart from the main name items. I've never had to set anything up with the Freeserve/Orange servers as the response suggests - some setting in Thunderbird has been changed!

  • How can I setup a mail-specific passcode/restriction on iPad used by multiple family members?

    How can I setup a mail-specific passcode/restriction on iPad used by multiple family members?
    Have an Exchange mail account setup and accessible in my mail on iPad... however my kids use it and i would like to restrict them from accessing this specific portion of the device.  I tried viewing restriction options and do not see that i can apply a restriction specifically to Mail.  Thanks for your help.

    Not a feature of iOS. Check the AppStore to see if there are other
    mail apps that allow passcode protection.
    Or use Safari to log onto your email via a web-based interface and
    enter your credentials each time. A bit slower, but the kids will
    not know the details to login.

  • My wife and I share the same iTunes account.  How can I setup a separate account for her iPhone using my iMac?

    My wife and I share the same iTunes account. How do I setup a separate account for her? Can I do it using my iMac?
    Thanks

    Using More than One iDevice on the Same Computer
    This applies mainly to couples who are adding another device and do not want their email, messages, etc. being duplicated on both devices. To begin read: How to use multiple iPhone, iPad, or iPod devices with one computer. You need to establish a separate Apple ID and password for whomever will use the new iDevice. See Apple - My Apple ID and Frequently asked questions about Apple ID. The easiest way is to do this on the computer using iTunes: iTunes- How to set up an Apple ID within iTunes.
    On the computer create a new user account for the person with the new iDevice. This will be the user account that person will always use. He/She will no longer use the other user account. This way that person will have a separate iTunes Library
    Start by transferring the new device(s) to a new account along with all your data.  Save any photo stream photos that you want to keep to your camera roll (unless they are already in the camera roll) by opening your Photos app, tap on Albums icon at the bottom. Now, tap on My Photo Stream album; tap Select; tap on the photos you want to select;, tap the share icon (box with upward facing arrow) in the lower left corner; then tap Save to Camera Roll.
    If you are syncing notes with iCloud that you want to keep then you need to open each of your notes and email them to yourself. Later you can copy and paste the text into new notes created in your new account.
    Tap on Settings > iCloud > Delete Account (only deletes it from this device, not from iCloud; the person keeping the current account will not be affected,) provide the password to turn off Find My Phone and choose Keep on My iDevice when prompted.  Sign in with a different Apple ID to create your new account. Choose Merge to upload your data.
    Once you are on separate accounts, you can each go to icloud.com and delete the other person's data from your account.
    Note: The essence of the above was created by user, randers4. I
    have made substantial changes to improve readability and syntax.

  • How to STOP syncing with Outlook via GPRS?

    I use an unlocked iPhone 3G with a prepaid mobile card.
    Everytime I open my Calendar function on the iPhone (just to see the days and dates) the iPhone attempts to sync over the air with my Outlook account calendar via GPRS.
    This costs a bomb on the prepaid card, and I want to stop the sync function.
    Would someone kindly tell me how to STOP the iPhone from syncing with my Outlook Calendar?

    If calendar events are synced over the air, this means you are accessing an Exchange account or a MobileMe account.
    If you don't want to sync calendar events over the air with the account, you need to turn Calendars off for over the air syncing for the account preferences on your iPhone. This will erase all calendars and calendar events from your iPhone and you will need to sync direct with a supported application on your computer via the iTunes sync process. If an Exchange account with Outlook on a Winblows PeeCee, this will not be possible.

  • How to stop syncing the photos only on facebook

    how to stop syncing the photos only on facebook

    corg2333 wrote:
    yeaa but it is not only on facebook i think..
    Disable the automatic spell checking service in your browser.
    Safari
    --> Edit --> spelling and grammar --> uncheck "check while typing"
    Firefox
    http://support.mozilla.com/de/questions/500215

  • How to stop voice control

    how to stop voice control?

    Hi Joannewpark,
    Press your Home Button to get to the Home Screen.
    Press Settings, then press again 2x fast - you will go to the Settings screen
    Press on General, then press again 2x fast - you will go to the General screen
    Use 2 fingers to indicate scroll up - Voice Over will begin to read the items on the screen, and will eventually get to the Accessibility option. When it says "Accessibility" press on it, then press on it 2x fast
    It will go to the Accessibility screen, tap on the Voice Over option one, and then again 2x fast, now tap on the Voice Over option again, and then double tap to turn it off.
    Cheers,
    GB

  • How do I setup my Airport Extreme so that I can extend the coverage of my existing AT&T wifi network?

    How do I setup my Airport Extreme so that I can extend the coverage of my existing AT&T wifi network?

    Start by establishing a permanent fixed Ethernet cable connection from one of the available LAN <-> ports on the ATT modem/router to the WAN "O" port on the AirPort Extreme.
    Ethernet cabling can be run up to 300+ feet or 100 meters, so you should be able to locate the AirPort Extreme exactly where it will be needed to provide more wireless signal coverage.
    Configure the AirPort Extreme to "create" a wireless network using exactly the same wireless network name, same wireless security setting, and same wireless network password that the ATT wireless is using.
    The final step is to insure that the AirPort Extreme is configured to operate in Bridge Mode, so it will work correctly with the ATT modem/router.
    If you need more specific steps, we need to know what operating system you are using on your Mac or PC. If you have a Mac and do not know which operating system it is using.....click the Apple icon in the upper left corner of the screen and then click About This Mac, and post back with the OS X version number that you see there.

  • How do I setup my Time Capsule (3rd Generation) to be accessed from the internet while I'm traveling?

    How do I setup my Time Capsule (3rd Generation) to be accessed from the internet while I'm traveling? It is installed on my home network behind my TWC broadband router.

    Ok.. since the TWC modem is also a router.. all configuration takes place on this box.. NONE whatsoever takes place on the TC.
    There is no airport utility 7.7.3 but there is a firmware of that number for the latest AC model TC..
    Is it tall like this.
    Then it is Gen5.
    otherwise it will have a firmware.. 7.6.4 or earlier and the airport utility must be 6.3 or earlier.
    Open the Airport utility and give us a screenshot of the summary page.
    That will also help us determine that you have the TC, which version and how it is setup.
    You might want to press the edit and also give us the Internet and Network tab as they should be set correctly as well.
    I have created a DDNS through DYN.com although I am not sure how to implement this into the TC.
    You do not do anything in the TC.. set it up in the Ubee router.
    Port forward 548 to the TC in the Ubee router.
    And make sure the TC has a static IP in the Ubee router.
    Overall if you find this too hard I strongly recommend you buy a product designed for remote access .. eg WD MyCloud.. they are cheap and easy peasy to setup for remote access.. by PC or Mac and since it is built outside of Apple you not bound up in Apple limitations built into all their equipment to prevent you using it the way you want.. rather than apple want you too.. eg BTMM and iCloud being the only way apple provide for access to the TC and only when it is the main router of the network.
    You are fighting hard because Apple made this hard.. not easy.

  • How to stop text box on iWeb page from automatically reverting to hyperlink when I click 'save'

    As far as I see, the main text box in the body section of my iWeb page reverts to a hyperlink (connecting to a file) when I click save.  I don't know how the hyperlink got activated to begin with--I must have done something, but I don't know what it was.  I tried this many times to fix it: went to Inspector "hyperlink" section, activated the text box in the page, un-clicked "make hyperlinks active" (so they are inactive), then un-clicked "Enable as a hyperlink."  That much works--the hyperlink (little white arrow in blue circle) disappears from the lower right corner of text box.  But as soon as I save (command S), the text box reverts to a hyperlink. 
    If I don't click save and move around the pages, it does not revert to a hyperlink.  It only reverts to a hyperlink when the file is saved.  Why is it doing this and how to stop this from happening--how to permanently return the text box to a non-hyperlink?
    The website page is: http://www.usronline.net/USR/VedicResearch.html.  If you click anywhere randomly in the main text, you'll get a prompt to download a PDF file.  This should not be, but I can't get this hyperlink to go away for good.
    Many thanks in advance.
    Vishnupriya

    Please pardon the reply delay--a big project deadline had to be met.  Now back to this work:
    Yes, the text in the oval object had a drop shadow (the oval object itself did not).  I removed the drop shadow from the text, but the image file icon stayed in the right corner of the oval object.  I deleted the text and then the image file icon disappeared.  But as soon as I typed text again inside the oval object (not even pasting the previous text) the image file icon appeared again.  I deleted the oval object entirely and simply typed the text inside the main text box itself.  The image file icon that was attached to that oval object is gone (along with the oval object).
    Still the image file icon is attached to the main text box, though.  I again tried to uncheck the Enable as hyperlink (same process as described in first posting) with that oval object gone, but when I "save" again it reverts to a hyperlink. 
    Next I tried this: I copied the text from the problem text box and pasted it into another text box (outside of the problem one).  Still in the new text box with the pasted text, the image file icon shows in the upper right corner. 
    I also removed all the drop shadow features from this main text box (there was one more, on some words typed in the main text box), but it is still showing as an image.
    I don't know how it became an image file, and I'm still stumped as to how to fix it (short of forgetting about trying to figure out how it became an image and just retyping all text into a new text box).
    The link you provided for "Web Safe Fonts" is returning this: "The server at www.ampsoft.net is taking too long to respond."  I'm using Arial and Georgia (Georgia only on the menu and header text) in the site, and I had verified before designing the site that these are web safe, so I had thought they were.
    If you or anyone have any further suggestions or suspicions on this matter, I'd be glad to hear them.
    Thank you.

  • HT1420 i forgot my answers to my security questions, how do i setup new questions and answers?

    I have forgotten my answers to my security questions, how do i setup new security questions and answers?

    Welcome to the Apple Community.
    Start here (change country if necessary) and navigate to 'Password and Security', reset your security questions using the link provided, you will receive an email to your rescue address, use the link in the email and reset your security questions.
    If that doesn't help, you don't receive a reset email or you don't have a rescue address, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
    If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support.

  • In my macbook pro when composing email it coping into thrash as well so how to stop this ?

    in my macbook pro when composing email it coping into thrash as well so how to stop this ?

    You may have a Bad fan. Make an appointment and take it to the genius bar for an evaluation. It's free, in warranty or out.

Maybe you are looking for