How to stop the bridge.exe active as to install the new application eg.Flash CC?

how to stop the bridge.exe active as to install the new application eg.Flash CC? please help?
I can't install the any new application every time.

Please refer:
http://helpx.adobe.com/creative-suite/kb/error-installation-cannot-continue-bridge.html
Regards,
Ashutosh

Similar Messages

How to stop and remove an active job.

How to stop and remove an active job.

What sort of "job" are you referring to? A print job? If so, open the queue for the printer - it should be in your Dock, or you can access it through the Printers & Scanners system preference - and click the green Pause button to stop the entire queue, or the Pause button next to a specific print job to pause just that job. To clear a job, click the "X" button to the right of the job.
If that's not the "job" you mean, please post back and clarify.
Regards.

At the top of my homepage, I'm getting a message "Downloading the latest applications", but the circle to the left keeps spinning, and no applications are downloaded. I don't know how to stop this, tried right and left clicking on the bar. This occurs

At the top of my homepage, I'm getting a message "Downloading the latest applications", but the circle to the left keeps spinning, and no applications are downloaded. I don't know how to stop this, tried right and left clicking on the bar. This occurs every time I open Firefox. How can I stop or disable this?
== This happened ==
Every time Firefox opened
== Several weeks ago.

See http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the ''updates'' and ''updates\0'' folder:
Vista/Windows7:
C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\ (updates)
C:\Users\<user>\AppData\Local\VirtualStore\Program Files\Mozilla Firefox\ (updates)
%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox\updates\

How to stop Gdm & fall back in console to edit the Gdm-login settings.

Unfortunately, I didnt configure, Gdm-user-login settings and started Gdm to play.
Now, Gdm prompts to login, but i cant, login with the username or as root.
so please somebody reply , how to stop Gdm & fall back in console to edit the Gdm-user-login settings.

ewaller wrote:Well, if I catch you before you waste your time, try rebooting, edit the kernel command line in grub and add '3' at the end.
Or boot from your install media, mount / at /mnt, and edit your /etc/inittab or /etc/rc.conf, depending on how you are staring GDM.
Grub bootloader failed to be installed on my system. so i have installed Syslinux. And in Syslinux, i did'nt find any option to edit.
However, i have re-installed Arch and now Arch-gnome up & running.

I Don't have access to the previous computer on which i installed the photoshop, the m bord is broken and i have a new computer, how can i reinstall on my new comp' with my serial number?

I Don't have access to the previous computer on which i installed the photoshop, the m bord is broken and i have a new computer, how can i reinstall on my new comp' with my serial number?

You are allowed to have two machines with activated installations, so if you only had one installation, you still have the option to install on a second without doing anything further than that. If you originally downloaded the purchase thru Adobe then you might find a download link available in your Adobe account online. You can also download thru the following page if you can find your version:
Download and Installation Help -
https://helpx.adobe.com/download-install.html
You can have the first installation deactivated to free up the activation and have it available for another machine again as well. YOu need to contact Adobe Support thru chat for that. For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

HT1923 When I try to uninstall iTunes I get a message saying iTunes 64 msi can not be located and I should enter an alternate path. How would I know where it it is? I get the same message when trying to install the update to iTunes 10.6.1.

When I try to uninstall iTunes I get a message saying iTunes 64 msi can not be located and I should enter an alternate path. How would I know where it it is? I get the same message when trying to install the update to iTunes 10.6.1.

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

The win32help.exe error when I use the help of LabVIEW .

I had installed the LabVIEW6.0 under the win2000.My computer has intel 845 motherboard and P4-1.5G CPU. When I open a vi and right click on a function vi for help. Then there will be a error"winhlp32.exe".I tried to install the LabVIEW and win2000,but there is no result.I don't know how to solve it.
I will really appriciate your help.

It sounds like something bad happened during one of the installations that is causing the problem. You've tried re-installing both Labview and Windows 2000 but the same thing happens? Are you do any custom things in your installation?
Matt Kisler
Applications Engineer
National Instruments
http://www.ni.com/ask

Firefox does not open when clicking on the icon, the firefox.exe process consumes 99 % of the CPU and my computer runs slowly.

I have been a happy user of Firefox for many years. Around last April first I opened Firefox and was offered an update to v 4.42.0.0 which I accepted. Installation seemingly went well. I forget now exactly what happened but the result has been that ever since April 1 I haven’t been able to open the Firefox browser when clicking on the Firefox icon. My computer now was running very slowly. I tried to uninstall Firefox, but a popup told me I couldn’t because Firefox was in use. This confused me because I couldn’t see it being used. Only now I have found that on Task Manager processes that “firefox.exe” was consuming 99 % of the CPU. After removing firefox.exe by clicking End Process my computer ran better. I uninstalled Firefox I had on my computer and installed Firefox 5.0. Unfortunately I have the same problems: Firefox does not open when clicking on the icon, the firefox.exe process consumes 99 % of the CPU and my computer runs slowly.

Born2die! Brilliant. I am a desktop clicker and never knew Firefox had a safe mode.
Thank You!
I was unable to start in safe mode initially. The second time I disabled all of the Add-Ons and she started up just fine. I enabled them one by one hoping to track down the culprit but the problem seems to have gone away.
BTW I am running ver. 3.6.8 (in response to cor-el's earlier post) and
Firefox is in the process of downloading 3.6.10 (which I am starting to think may have been what caused this whole problem to begin with)
Incidentally, whats up with all of the Java Console Add Ons?
I have:
Java Console 6.0.11, Java Console 6.0.13, Java Console 6.0.15
Java Console 6.0.17, Java Console 6.0.20, and Java Console 6.0.21
What are they? Do I need them? Can I uninstall them? Is this due to using Open Office?
Also, .NET Framework 0.0.0 Should I uninstall it?

PS CC 2014 DNG and RAW 8.5 did not update with the rest of the CC package. I downloaded/installed the DNG/RAW converter but how do you install w/i CC 2014 plugins

PS CC 2014 DNG and RAW 8.5 did not update with the rest of the CC package. I downloaded/installed the DNG/RAW converter but how do you install w/i CC 2014 plugins

Thanks John. I have tried solutions 1 to 3 from (-http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.h tml) and they do not work. So I presume that all I can do is to remove all 25 CC applications and start again!
Incidently, ( http://www.adobe.com/downloads/updates/ ) does not list Adobe Camera Raw 8.4 as an update even though Adobe have announced that it is available (http://blogs.adobe.com/lightroomjournal/2014/04/camera-raw-8-4-and-dng-converter-8-4-now-a vailable.html). The same applies for Adobe Premiere Pro 7.2.2 (http://blogs.adobe.com/premierepro/2014/04/premiere-pro-cc-7-2-2.html). If they are not available this would explain why I cannot download them but I am very suprised that Adobe didn't mention this when I contacted them.
Anyway thanks again

How can I get my safari to open after installing the new Mavericks operating system?

How can I get my safari to open after installing the new Mavericks operating system?

Thanks Carolyn. Unfortunately, this didn't work. It turned out to be in my display monitor as I have my computer wired to my tv for streaming. Once I changed the monitor display it worked fine. Go figure

Hi..I purchased a Pantum p2000 printer and I cannot use it. It gives me an error ( Stopped, Filter failure) I tried to re-install the driver several times but I still get the same message. I'm using OS X Yosemite 10.10.1

Hi..I purchased a Pantum p2000 printer and I cannot use it. It gives me an error ( Stopped, Filter failure) I tried to re-install the driver several times but I still get the same message. I'm using OS X Yosemite 10.10.1

If you haven't done so already, try resetting the printing system.
OS X Mavericks: Reset the printing system also Yosemite

TS3212 I receive a massage that a new version of ITunes was available (11.1.4). I proceeded to update, the download went ok but when installing the Message "Service 'Apple Mobile Device' failed to start, verify that you have sufficient Privileges to start

I receive a massage that a new version of ITunes was available (11.1.4). I proceeded to update, the download went ok but when installing the Message “Service ’Apple Mobile Device’ failed to start, verify that you have sufficient Privileges to start system Services”
On pressing retry I got the same message.
On pressing Ignore, I got the message “ITunes was not installed correctly, please reinstall ITunes – Error 7 – (windows error 126)
I reinstalled with the same error messages and the same results.
I uninstalled existing and reinstalled from scratch and the same error messages again.
I try to repair and at the end it said it had installed correctly – but when it tried to start I got the message “This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix the problem” I now get the same message when I first start the computer but when I press ok I receive ““ITunes was not installed correctly; please reinstall ITunes – Error 7 – (windows error 126)” again.
It appears the update has not only corrupted the operating system (Xp Pro SP3) of my computer but I have no backups to my IPhone, my wife’s IPhone or the three others phones that use my computer.
I hope you can advise me how to recover my backups

Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy

Error occurred in deployment step 'Add Solution': A feature with ID '' has already been installed in this farm. Use the force attribute to explicitly re-install the feature.

Hi I am getting the error
Error occurred in deployment step 'Add Solution': A feature with ID 10495515-2482-41fd-98eb-3c87f739f54b has already been installed in this farm. Use the force attribute to explicitly re-install the feature.
when trying to deploy web parts
question 1 - how do i use the force attribute when deploying from visual studio
question 2 - am i deplying it to the right place, if i deply it to the
url:port that points to my central admin tool it deploys but i cant seem to see it in any of my webs in my site collection, if i deploy it to the
url:port that points to my site collection I get this error.
im new to all this by the way :)
thanks in advance

If you are deploying from Visual Studio then please follow this post:
http://sharepointfordeveloper.blogspot.com/2014/03/solved-visual-studio-issue-error.html
Open the visual Studio and navigate to the feature XML file and add the bellow attribute.
AlwaysForceInstall="TRUE"
The <FeatureName>.Template.Xml output would be some think link this.
<?xml
version="1.0"
encoding="utf-8"
?><Feature
xmlns="http://schemas.microsoft.com/sharepoint/"
AlwaysForceInstall="TRUE"></Feature>

I keep getting the error message on my MP510, the type of printhead is incorrect install the correct

Recently my printer stopped printing black, although it would print the other colors. When I tried to print a print pattern, it would not print the checkered pattern it used to print to check the alignment. I tried cleaning, to no avail. Then I got the message: the type of printhead is incorrect, install the correct printhead on my control panel. Now when I turn on the unit, I can't do any maintenance or anything, it just shows the same error message as noted. I talked to a Canon representative, and he said to clean the printhead, I did. That did not help. My questions are, is the printhead bad. Second, it would seem I can replace the printhead. Just what is the likelyhood the printhead is the probnlem, or is this problem a problem that can only be curred by a service tech? Canon informs me this printer is not serviceable anylonger? So, I guess I'm on my own? They offer a deal on another printer at a reduced price. Frankly, I don't think my printer needs to be replaced, just fixed. If all that it requires is a printhead, I'm sure I can do the replacement. Just what are the odds replacing the printhead will solve the problem? I'm quite certain this error message has occured before on this type of printer, and other users have probably figured out the solution? Can someone help? Thank you.
Rick

Hi sciencemagic,
The major cause for this type of error/issue is the printhead. In most situations, replacing the printhead will resolve the problem. However, the error may appear because of another internal malfunction with the printer.
Another thing to consider is the cost of a replacement printhead, which may exceed the cost of purchasing a newer printer. With the newer printer you also get access to newer printing features and technology including better image quality.
For these reasons, I recommend exploring the replacement option, but we are happy to help with any available service options for your PIXMA MP510. Contact us to discuss your options further.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Unable to start EBS DB after the Server Crash. Error in installing the Required RPM.

Hi , Hussein ( As most of the Time It is Only you here who comes to the rescue or give Usefull inputs. I am sorry if i mistaken, no Pan intended for Other Experts)
I 've also posted this issue here but got no response. https://forums.oracle.com/thread/2590497
Badly require your inputs and suggestions on the Following Issue. , Really Appreciate the suggestions.
I need to Install the sabayon-apply rpm which could fix the issue after the Server Crash but unable to install it.
   Please see the Brief of the Issue.
I got stuck up in installing the rpm after the server(Red Hat Enterprise Linux Server release 6.0 (Santiago) x86_64 GNU/Linux) got
crashed Eventhough I am able to start it in Xwindows but not able to run or start EBS database along with many other programmes. Also The
VirtualBox machine installed on it 've No issue, they work fine But the host OS is not fine. as there are lots of
errors in .xsession-errors. which i 've pasted below. And Unable to Install the sabayon-apply rpm that could have fix the Issue.
I would highly Appreciate if anyone could drop few hints and suggestions on this Issue as this is really Urgently Important for me.
Please see the following Brief of the Issue.
after starting the server in Xwindows I was installing the rpms from RHEL6/Packages directory on the server even installed 10-12 rpms
While installing the rpm i 've inadvertantly issued or run this command
rpm -ivh *.rpm --force --nodeps as it ended up with Errors Header V3 RSA/SHA256 Signature, key ID fd431d51: BAD
    After That I could Not Install any rpm with yum or rpm command as getting the Same Errors.
while trying to install individual rpm am getting the followig Errors
[root@ebs Packages]# rpm -ivh libX11*
error: libX11-1.3-2.el6.i686.rpm: Header V3 RSA/SHA256 Signature, key ID fd431d51: BAD
error: libX11-1.3-2.el6.i686.rpm cannot be installed
[root@ebs Packages]# rpm --checksig gtk2*
gtk2-2.18.9-4.el6.i686.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
gtk2-2.18.9-4.el6.x86_64.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
gtk2-devel-2.18.9-4.el6.i686.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
gtk2-devel-2.18.9-4.el6.x86_64.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
gtk2-devel-docs-2.18.9-4.el6.x86_64.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
gtk2-engines-2.18.4-5.el6.i686.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
gtk2-engines-2.18.4-5.el6.x86_64.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
gtk2-immodule-xim-2.18.9-4.el6.x86_64.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
For that I tried to import the RPM GPG Key But still faced the same errors
[root@ebs yum.repos.d]# wget http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6 -O /etc/pki/rpm-gpg/RPM-GPG-KEY-oracle Key fingerprint = 4214 4123 FECF
C55B 9086 313D 72F9 7B74 EC55 1F03
--2013-10-08 00:04:56-- http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6
Resolving public-yum.oracle.com... 202.159.216.177, 202.159.216.171
Connecting to public-yum.oracle.com|202.159.216.177|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1011 [text/plain]
Saving to: “/etc/pki/rpm-gpg/RPM-GPG-KEY-oracle”
FINISHED --2013-10-08 00:05:06--
Downloaded: 6 files, 55K in 2.0s (27.7 KB/s)
100%[===========================================================================================================================================================>]
1,011 --.-K/s   in 0s
2013-10-08 00:04:56 (155 MB/s) - “/etc/pki/rpm-gpg/RPM-GPG-KEY-oracle”
saved [1011/1011]
   Than i run this command
[root@ebs yum.repos.d]# rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-oracle ----it Returns with no output
[root@ebs yum.repos.d]#
[root@ebs log]# rpm -q gpg-pubkey-ec551f03-4c2d256a
gpg-pubkey-ec551f03-4c2d256a
But still I can't install the rpms, got the same Errors. please see the following
[root@ebs yum.repos.d]# yum install firefox*
Loaded plugins: refresh-packagekit, rhnplugin
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Downloading Packages:
(1/2): firefox-17.0.9-1.0.1.el6_4.x86_64.rpm
| 25 MB     03:42
(2/2): xulrunner-17.0.9-1.0.1.el6_4.x86_64.rpm
| 14 MB     02:03
Total
117 kB/s | 39 MB     05:46
error: rpmts_HdrFromFdno: Header V3 RSA/SHA256 Signature, key ID ec551f03: BAD
Problem opening package xulrunner-17.0.9-1.0.1.el6_4.x86_64.rpm
[root@ebs log]# rpm -qf `which gpg`
error: rpmdbNextIterator: skipping h#     455 Header V3 RSA/SHA256
Signature, key ID fd431d51: BAD
[root@ebs log]# gpg --list-keys
/root/.gnupg/pubring.gpg
pub 1024D/11F63C51 2002-02-28
uid Jamie Cameron <[email protected]>
sub 1024g/1B24BE83 2002-02-28
pub 2048D/671DF296 2013-10-08
uid oracle
sub 2048g/9FE459CE 2013-10-08
pub 1024R/F3A5AC78 2013-10-08
uid oracle (no comment) <[email protected]>
sub 1024R/6DC65985 2013-10-08
pub 1024R/78F6C944 2013-10-08
uid root user (Example GPG Key Signature For RPM
Packages) <[email protected]>
sub 1024R/77C97AFF 2013-10-08
[root@ebs log]# rpm -qi 'gpg-pubkey-*'
Name : gpg-pubkey Relocations: (not relocatable)
Version : ec551f03 Vendor: (none)
Release : 4c2d256a Build Date: Wed 09 Oct
2013 01:09:10 AM IST
Install Date: Wed 09 Oct 2013 01:09:10 AM IST      Build Host: localhost
Group : Public Keys Source RPM: (none)
Size : 0 License: pubkey
Signature : (none)
Summary : gpg(Oracle OSS group (Open Source Software group)
<[email protected]>)
Description :
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: rpm-4.8.0 (NSS-3)
mQENBEwtJWoBCACpiY2rGA6T0ceBi92X88/QclytVBjtDRohOVzs3pmIPh3ULqsW
G323nmyKbKQBBSjh9OnuO9Y09VG8mzr/w9YV0Ix4cI9/HDTERZ2+TR5u+VNn5J5h
yvwQSN/FEK6oH2+mz7O0yUNleN7UltR4MOEkHIoAhIvv+1AQQKN3OM8oalz+3gv/
zz9rAoQczQzT7QWOtBrsRMZgBrKXY/TpJrpVSO3Hx8CnbhKGtLxCCrxZ5v7hh1ht
3CRAr2+h5bDA9KP6vBZWKEs7NgcvtZFDY6EJc7AoApr3phX9hHE2+snTxe82DkFT
uA69C8wLyjPCoSy+tcaCqJKOZelNy9RN/WKRABEBAAG0RE9yYWNsZSBPU1MgZ3Jv
dXAgKE9wZW4gU291cmNlIFNvZnR3YXJlIGdyb3VwKSA8YnVpbGRAb3NzLm9yYWNs
ZS5jb20+iQE8BBMBAgAmBQJMLSVqAhsDBQkWjmoABgsJCAcDAgQVAggDBBYCAwEC
HgECF4AACgkQcvl7dOxVHwMiNAf/cD8R74fCBeQsAYid5slIz7CG8xEOBUTDNEJT
p/owtzr7m7Ydp1txNBOkVeVkUP8czX5EldcmoxA4kCCyHhnxmpJnOt52Fy5ZRnYh
Ll5gYdpJpXGVScB7fnlh3rJAaesSTacVFC5MKIYPZBiTo9soSXMLNcG8WqHPasdd
AblC4t5BTDNYlX1RiPeP6m5egHnnxyAXsis8fqIZY0RC9hERxWQ6hdDAX0tJXY8F
88HDUozvo8jqTlg/5GZcfqcbUjjMUJQ5cBtH3adCthMycdPpPXWJQBuzMIdFJ03u
YuQ3XrKxBkOLips+OZuWNVZzrPOHsenb49aX4yQsLVc2E2fhKQ==
=M8XY
-----END PGP PUBLIC KEY BLOCK-----
I 've tried to remove the existing keys But Not able to remove them as well.
Is this the right way of removing the keys ?
rpm -e --allmatches 'gpg-pubkey-ec551f03-*' the ec551f03 is the
version of rpm -qi 'gpg-pubkey-*' query... Please correct
Could you tell what I am missing here that's causing the Issue.
Following are the Errors that is observed in .xsession-errors log file
===== BEGIN RING BUFFER (/usr/sbin/sabayon-apply) =====
MainThread 2013/10/08 18:34:23.3001 (sabayon-apply): No profile for
user 'root' found
MainThread 2013/10/08 18:34:23.3005 (sabayon-apply): Fatal exception!
Exiting abnormally.
MainThread 2013/10/08 18:34:23.3009 (sabayon-apply): Traceback (most
recent call last):
File "/usr/sbin/sabayon-apply", line 149, in <module>
sys.exit (util.EXIT_CODE_NO_USER_PROFILE)
SystemExit: 3
===== END RING BUFFER (/usr/sbin/sabayon-apply) =====
This configuration for the debug log can be re-created
by putting the following in ~//etc/sabayon/sabayon-debug-log.conf
(use ';' to separate domain names):
[debug log]
max lines = 1000
gnome-session[3707]: EggSMClient-WARNING: Desktop file
'/etc/xdg/autostart/esc.desktop' has malformed Icon key
'esc.png'(should not include extension)
GNOME_KEYRING_SOCKET=/tmp/keyring-x5SKbN/socket
SSH_AUTH_SOCK=/tmp/keyring-x5SKbN/socket.ssh
Failed to play sound: Not available
(polkit-gnome-authentication-agent-1:3917): GLib-GObject-WARNING **:
cannot register existing type `_PolkitError'
(polkit-gnome-authentication-agent-1:3917): GLib-CRITICAL **:
g_once_init_leave: assertion `initialization_value != 0' failed
W: main.c: This program is not intended to be run as root (unless
--system is specified).
** Message: applet now removed from the notification area
** (gnome-user-share:3948): WARNING **: gnome-user-share cannot be
started as root for security reasons.
08/10/2013 06:34:26 PM Autoprobing TCP port in (all) network interface
08/10/2013 06:34:26 PM Listening IPv{4,6}://*:5900
08/10/2013 06:34:26 PM Autoprobing selected port 5900
08/10/2013 06:34:26 PM Advertising authentication type: 'No Authentication' (1)
08/10/2013 06:34:26 PM Advertising security type: 'No Authentication' (1)
Initializing nautilus-gdu extension
Initializing nautilus-open-terminal extension
** Message: applet now embedded in the notification area
Connecting to deprecated signal
QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
kbuildsycoca4 running...
Connecting to deprecated signal
QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
Connecting to deprecated signal
QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
Window manager warning: Invalid WM_TRANSIENT_FOR window 0x4e00004
specified for 0x4e00019 (Restore Se).
Object::disconnect: Unexpected null parameter
QObject::connect: Cannot connect (null)::activePartChanged(
KParts::Part * ) to KHTMLPart::slotActiveFrameChanged( KParts::Part *
kio_http_cache_cleaner: Already running!
Object::disconnect: Unexpected null parameter
Window manager warning: Invalid WM_TRANSIENT_FOR window 0x5200004
specified for 0x5200019 (Restore Se).
Object::disconnect: Unexpected null parameter
QObject::connect: Cannot connect (null)::activePartChanged(
KParts::Part * ) to KHTMLPart::slotActiveFrameChanged( KParts::Part *
Object::disconnect: Unexpected null parameter
QObject::connect: Cannot connect (null)::activePartChanged(
KParts::Part * ) to KHTMLPart::slotActiveFrameChanged( KParts::Part *
Object::disconnect: Unexpected null parameter
Window manager warning: Invalid WM_TRANSIENT_FOR window 0x4e00004
specified for 0x4e08cb7 (timesofind).
libpng warning: Extra compressed data in IDAT
Window manager warning: Invalid WM_TRANSIENT_FOR window 0x4e00004
specified for 0x4e0a6e3 (Server Aut).
Highly appreciate the response.
Thanks And Regards
MZ

The Packaged are already there on the server as the RHEL software DVD is copied on the server.
Yes it was working before the crash, And Even after the Crash i.e
after starting the server in Xwindows I was installing the rpms from RHEL6/Packages directory on the server even installed 10-12 rpms
and was in the process of installing the sabayon rpm i 've inadvertantly issued or run this command
rpm -ivh *.rpm --force --nodeps from RHEL software Packages directory.
and it ended up with Errors Header V3 RSA/SHA256 Signature, key ID fd431d51: BAD
   After that I could Not install any rpm from rpm or yum command.
   I 've Downloaded the new sabyon* and Other rpms from the net and tried to install them with rpm or yum command but
    got the same Errors Header V3 RSA/SHA256 Signature, key ID fd431d51: BAD
   with yum am getting this error
   error: rpmts_HdrFromFdno: Header V3 RSA/SHA256 Signature, key ID ec551f03: BAD.
I 've Tried searching on google as well for at least 10 hours but did not get any help from it so far.
The Reinstallation of OS is not AN Option for me rightnow.
   Could you tell something which i could try & may be that works.
Thanks
MZ

How to stop the bridge.exe active as to install the new application eg.Flash CC?

Similar Messages

Maybe you are looking for