How to stop the internal batch session

Hi ,
How to stop the internal batch session, which is triggered from the program.
When I execute the program, there is an batch session, which starts processing in parallel with the program, and causes an error message for the program, so the further process is affected.
I tried finding the session through the Transactions - SM35, SM37. However, I could find any session in my name.
However, when I try thro SM04, I could find an session with the same error message. But I am not able to end the session.
Pleas advise.
Thanks,
cartesian.

Go through transaction SM50. In case you have more than one application server (transaction SM51 will show) you can also use SM66 which will show all running processes on all application servers.
With SM50 you will only see the process running if it is running on the same application server you are logged on to.
Mark the process and use menu 'Program/Session - End Session' or 'Process - End with or without Core'
Hope that helps,
Michael

Similar Messages

  • How to show the internal batch number for order in make to order scenario

    Hi !!!
    Gurus!!
    I am working on make to order scenario .For delivery of order may I see the batch no.of esch order.
    How system will get the internal number batch.
    I have config. batch management.
    What should be the next process.
    Regards,
    Nitin

    Hi,
    QI am working on make to order scenario .For delivery of order may I see the batch no.of esch order.
    A. Yes you can see batch number for each order
    QHow system will get the internal number batch.
    A. there are two possiblities assign you batch number at production order before release or assign batch or each GR at the time of executing GR transaction.
    QI have config. batch management.
    A.In Material master you also have to tick for batch managemnt relevency
    QWhat should be the next process.
    A. Consult again if any thing missing
    Regards,
    Syed

  • How to do the internal batch no. assignment using SAPLV01

    what is the use of internal batch no assignment using the exit mentioned above? where we use it?

    Hi,
    QI am working on make to order scenario .For delivery of order may I see the batch no.of esch order.
    A. Yes you can see batch number for each order
    QHow system will get the internal number batch.
    A. there are two possiblities assign you batch number at production order before release or assign batch or each GR at the time of executing GR transaction.
    QI have config. batch management.
    A.In Material master you also have to tick for batch managemnt relevency
    QWhat should be the next process.
    A. Consult again if any thing missing
    Regards,
    Syed

  • How to read the messages from the processed Batch session log

    Hi All,
    I am posting an accounting document through FB01 by submitting the report RFBIBL00 along with the file through which a Batch session gets generated in SM35.The Batch session is then processed by submitting the report RSBDCSUB. My code is as shown below:
    SUBMIT rfbibl00 WITH  ds_name = co_file_output
                      WITH callmode = co_batch AND RETURN.
    Process Batch session
      SUBMIT rsbdcsub
        WITH mappe = gv_name_jd
        WITH von   = sy-datlo
        WITH bis   = sy-datlo
         AND RETURN
    My requirement is to capture the document number from the log of the processed batch session. Can anyone suggest me how to go about this.
    Thanks in Advance,
    Vinay B

    Hi,
    check the routine read_bdc_log_plain in program rsbdc_protocol.
    get the data from table APQL and then use the logic.
            bapiret2-id = logtable-logmessage+74(16).
            bapiret2-number = logtable-logmessage+94(3).
            bapiret2-message_v1 = logtable-logmessage+100(20).
            CALL FUNCTION 'BAPI_MESSAGE_GETDETAIL'
              EXPORTING
                id         = bapiret2-id
                number     = bapiret2-number
                textformat = 'ASC'
                message_v1 = bapiret2-message_v1
              IMPORTING
                message    = bapiret2-message.
            WRITE: (60) bapiret2-message.
    Edited by: Keshav.T on Apr 7, 2010 4:23 PM

  • How to stop the timing out of web Discoverer Plus

    I was working in Plus, and it drove me crazy that I would loose my work because I kept my session open and it would time out.How to stop the timing out of web Discoverer Plus?
    Thank you,
    Olga

    Please check Discoverer configuration guide which tells you which parameter to change in preference file(pref.txt).I think you change the value.

  • Anyone know how to stop the "activate" box from blocking usage of a perfectly legal copy of Ilisten? I want to help my dyslexic grandson and this box, including the activation code, keeps popping up, keeping me from using the software. I activated the pro

    Anyone know how to stop the "activate" box from blocking usage of a perfectly legal copy of Ilisten? I want to help my dyslexic grandson and this box, including the activation code, keeps popping up, keeping me from using the software. I activated the program and did a few profile building sessions, now it pops up each time I start the program, blocking me from using it. Help sure would be appreciated.
    Jay

    I looked at your post this morning and did not know enough to respond, other than to find out that links to iListen now go to newer, renamed software. Considering it's been nine hours with no response, I'm suspecting few people here have experience with that software. You could contact the current copmany that used to sell that package and see if they have any archived support info.
    BTW: please check you entry for "Mac OS" in your profile. It says iOS, which cannot run on an iMac. iOS is the system for phone and iPads but can't run on Mac computers. Do "About this Mac" from the Apple menu and see what it says about the OS version. Should look like this:
    If the "Processor" line says "Intel," you have a newer Mac than the old modles this forum covers; Intel iMac have their very own forum here:
    iMac (Intel)

  • How to prolong the bluetooth timeout session on ipad and iphone

    how to prolong the bluetooth timeout session on ipad and iphone?
    I understannd that the standard timeout setting is 3 mins. what if I want to prolong the connection duration, how should I do?
    thanks

    To my knowledge, there is no "time out" on a device.  A mouse, KB, etc will go into a low power mode after a short period of non-use.
    Barry

  • How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share form

    How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
    To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips.  This operation has been stalled by the spinning ball. Shut down restart has not helped.
    The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
    What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

    How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
    To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips.  This operation has been stalled by the spinning ball. Shut down restart has not helped.
    The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
    What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

  • How to stop the changes made for the BP in CRM not to update in R/3

    Hello Gurus''
    we are in need of help......i have an issue...the issue is
    Wht ever the changes we do in crm , need to be not updated in r/3 ....for example if we change the the language for the BP 100 in CRM, it should not update in R/3
    Where as in our case the data is updateing in R/3
    Here by requesting you all to help me out how to stop the updaation of some changes  which are made in CRM , that should not be in R/3
    Point will be given......
    Regards
    sreeram Raghu

    Hello
    Thanks for ur reply.........
    We have the following business process
    We create BP with role prospect in CRM, once the prospect is ready to buy the product we conver the prospet in to customer and thesame  customer is replicated in R/3 fro sales.
    What i am looking at is for the customer we created in CRM if we change any data that should be updated in r/3..it may be nay like name address ...language....etc.....
    can u help me out...as u told me to unassig/delete the subcription:All Business partner(MESG) under that we have --
    >publication>All BP(MESG)->Replication object-->Bupa_Main
    >Sites-->SQ1_300
    If we do this process does the issue will fix or else we need to do soem thing more...
    Thanks in advance
    Regards
    Sreeram Raghu
    +91-99 94 94 82 72

  • How to stop the waterflow?

    Hi,
    I need to make the water coming from the shower, when shower is clicked.
    And the water should stop after 5 seconds.
    The code is below.
    The water is flowing nicely. But I do not manage to stop it.
    I added a timer, which starts when the shower is clicked. And should stop the waterflow after 5 seconds have passed.
    With the lines
    if (stop = true)
         break;
         trace("break");
    it looks like the for loop is breaking right from the start, from the first second. But not completely, somehow 1 or 2 drops are flowing.
    Without these lines nothing is happening when the time is over (5 seconds from clicking the shower). Water is just flowing.
    Can someone help? How to stop the water flowing after 5 seconds and clean of the array and stage from the waterdrops?
    Many thanks in advance!
    import flash.display.MovieClip;
    import flash.events.Event;
    import flash.utils.Timer;
    import flash.events.TimerEvent;
    var WatertropArray: Array = new Array();
    var WaterArea01: MovieClip = new WaterArea();
    var WaterBorder01: MovieClip = new WaterBorder();
    var timer: Timer = new Timer(5000, 1);
    var stopp: Boolean;
    var i: uint;
    Shower.addEventListener(MouseEvent.CLICK, waterFlowStart);
    function waterFlowStart(event: MouseEvent): void
                    addChild(WaterArea01);
                    WaterArea01.x = WaterArea00.x;
                    WaterArea01.y = WaterArea00.y;
                    WaterArea01.alpha = 0;
                    addChild(WaterBorder01);
                    WaterBorder01.x = WaterBorder00.x;
                    WaterBorder01.y = WaterBorder00.y;
                    WaterBorder01.alpha = 0;
                    stopp = false;
                    timer.addEventListener(TimerEvent.TIMER, waterFlowEnd);
                    timer.start();
                    addWaterdrops();
                    Shower.removeEventListener(MouseEvent.CLICK, waterFlowStart);
    function addWaterdrops(): void
                    for(var i: uint = 0; i < 100; i++)
                                   var waterDrop: MovieClip = new Waterdrop();
                                   addChild(waterDrop);
                                   waterDrop.x = Math.round(Math.random() * stage.stageWidth / 1.5);
                                   waterDrop.y = Math.round(Math.random() * stage.stageHeight / 3);
                                   waterDrop.alpha = 0;
                                   waterDrop.rotation = -12;
                                   WatertropArray.push(waterDrop);
                                   trace("waterdrops added");
                                   moveWaterdrops();
    function moveWaterdrops(): void
                    waterDrop00.addEventListener(Event.ENTER_FRAME, waterFlow);
    function waterFlow(event: Event): void
                    for(var i: uint = 0; i < WatertropArray.length; i++)
                                   WatertropArray[i].y += 8;
                                   WatertropArray[i].x += 5;
                                   //trace(i);
                                   if(WatertropArray[i].hitTestObject(WaterArea01))
                                                   WatertropArray[i].alpha = Math.random();
                                                   WatertropArray[i].scaleX = Math.random();
                                                   WatertropArray[i].scaleY = WatertropArray[i].scaleX;
                                   if(WatertropArray[i].hitTestObject(WaterBorder01) || WatertropArray[i].x > stage.stageWidth || WatertropArray[i].y > stage.stageHeight / 2)
                                                   WatertropArray[i].x = Math.round(Math.random() * stage.stageWidth / 1.5);
                                                   WatertropArray[i].y = Math.round(Math.random() * stage.stageHeight / 3);
                                                   WatertropArray[i].alpha = 0;
                                   if(stopp = true)
                                                   break;
                                                   trace("break");
    function waterFlowEnd(event: TimerEvent): void
                    trace("TIME OVER");
                    stopp = true;
                    stoppTrue();
    function stoppTrue(): void
                    for(var i: uint = WatertropArray.length; i > WatertropArray.length; i--)
                                   remove(i);
    function remove(idx: int)
                    removeChild(WatertropArray[idx]);
                    WatertropArray.splice(idx, 1);
                    trace("REMOVED");
                    removeChild(waterDrop00);
                    trace(i);

    thanks again, kglad.
    changed the for-loop and it is reaching now the last functions as well.
    but there is still a but  ... an error message.
    function waterFlowEnd(event: TimerEvent): void
    trace("TIME OVER");
    stopp = true;
    stoppTrue();                                                       // line 106
    function stoppTrue(): void
    for(var i: uint = WatertropArray.length-1; i >= 0; i--)
    trace("stoppTrue");
    remove(i);                                                         // line 115                                                    
    function remove(idx: int)
    removeChild(WatertropArray[idx]);                   // line 123
    WatertropArray.splice(idx, 1);
    trace("REMOVED");
    //removeChild(waterDrop00);
    trace(i);
    and the output panel gives the following (tested with 5 water drops, 5 items in array):
    TIME OVER
    stoppTrue
    REMOVED
    0
    stoppTrue
    REMOVED
    0
    stoppTrue
    REMOVED
    0
    stoppTrue
    REMOVED
    0
    stoppTrue
    REMOVED
    0
    stoppTrue
    TypeError: Error #2007: Parameter child must be non-null.
    at flash.display::DisplayObjectContainer/removeChild()
    at TitavannisinglisekeelneAS3_fla::MainTimeline/remove()[TitavannisinglisekeelneAS3_fla.Main Timeline::frame1:123]
    at TitavannisinglisekeelneAS3_fla::MainTimeline/stoppTrue()[TitavannisinglisekeelneAS3_fla.M ainTimeline::frame1:115]
    at TitavannisinglisekeelneAS3_fla::MainTimeline/waterFlowEnd()[TitavannisinglisekeelneAS3_fl a.MainTimeline::frame1:106]
    at flash.utils::Timer/_timerDispatch()
    at flash.utils::Timer/tick()
    What is that error message trying to tell me?   

  • How to stop the posting of documents when there is an error in record

    Hi,
    I have one issue with respect to posting of documents.
    In my Exl sheet there are 1900 records which would split into 950 records during run time.
    For each 950 records a document to be created.  Here the issue, during test run thers is no error where all the validations are done and records in xl sheet are correct.
    However when  posting, i am submitting to to standard program rfbibl01, where it is creating the session and output of the program is not showing any errors - report.
    During execution of  session, it is creating document for 1 set of 950 records and for 2 set it is finding some error and not creating any document.
    Now my requirment is as follows: since there is an error in second set, i don't want to post any record starting from the begining. No document should be created.
    In my program  once i have submitted to standard document i don't have any control over the progam in stopping the creation of session or document creation.
    Any solutions are most welcome.
    Thanks in advance.
    Regards
    Harikrishna
    Edited by: Harikrishna yoganarasimhaiah on Feb 1, 2008 7:45 AM
    Edited by: Harikrishna yoganarasimhaiah on Feb 1, 2008 7:48 AM
    Edited by: Harikrishna yoganarasimhaiah on Feb 1, 2008 7:50 AM

    Hi ,
    Use the FirstVisibleRow property of the table , bind with some attribute containing the index of the selected row...
    Regards
    Yash

  • How to stop the auto-start of log reader agent (replication) right after my database is restored?

    I have the scenario where the SQL server is restored (after migration).
    This database has transactional replication set-up on one of the databases. When I do a manual delete and restore of the database, I see that the replication starts right after the publisher and subscriber are restored.
    Replication agents should not start and run before the integrity checks are completed. How to stop the replication from auto starting right after the migration?
    Thanks in advance - Jebah

    Thanks Pradyothana, I have disabled the logreader, distribution agents through sp_update_job in Tsql script. I have also verified that there are no pending transactions to be replicated to the subscriber, I see that the job is still being executed. Is there
    any other way to disable the jobs?
    Steps I followed
    Started with a Working publication and subscription
    Disabled the jobs (log reader and distribution agents)
    Backed up publisher, subscriber, distribution and msdb
    Deleted the publication, subscription, publisher and subscriber
    Restored the publisher, subscriber, distribution and msdb
    Enabled the jobs and executed sp_replrestart
    Observations/Issues
    Replication does not work
    Replication monitor does not show any error
    Jobs are shows as enabled but not started in job monitor
    Not able to start/stop the log reader and synchronization manually.
    I am not sure if I have missed something while restoring the db.
    Thanks in advance

  • How to stop the running infospoke

    Hi Experts,
    there is a infospoke is still running so long time, it's incorrect, i'll cancel it as kick off the dependenies, i have no idea to how to stop the running infospoke. Anybody could tell me how to do it. thanks in advance.

    hi denny,
       Go to SM37 , find the job , stop the process
    or
       To stop the job find the job with the help of the request name ( TC - SM37 ),then in the job Details find the PID .
    find the process in the process Overview (SM50 / SM51 ).
    Set the restart to NO and Cancel the process without core
    u can also see these threads that are already posted:
    stopping v3 run job LIS-BW-VB_APPLICATION_02_010
    how to cancel or change the background job which is scheduled
      In SM37, for the job , click on Step button. Then from the menu Goto > variant. You can see the process chain name here.
    sure it helps
    Thanks
    Varun CN

  • How to stop the report from Web!

    hi,all!
    Now I can start a report from Web with schedule parameter!Can you tell me how to stop the report via the Web server?Or tell me with which patameter.Thank a lot.

    hello,
    there is a CGI/Servlet command called killjob which you pass the job-id of the job you want to kill.
    regards,
    the oracle reports team --pw                                                                                                                                                                                                                                                                                                           

  • How to stop the Dialog from being dragged

    I was hoping that someone could tell me when calling a Dialog from Jframe, a how to stop the Dialog from being dragged
    while a dialog is showing.
    When it is visible I can still click and drag the Dialog
    I want to set it so you can not drag it until the dialog has be closed.

    If you don't have access to the parent frame, a "hack" that usually works:
    Frame frame = Frame.getFrames()[0];
    if (null != frame && frame instanceof JFrame){
    JFrame jf = (JFrame)frame;
    JDialog jd = new JDialog(jf, "title");
    ... code here ...
    As each JFrame (or Frame) is opened, its stored in the array of Frames that you can get. Same thing with Dialog.getDialogs(). Almost always, at least so far for me I've never had this problem, the [0] index is the main window opened, or the parent/top frame. I'd put the check in there to be safe and make sure its a JFrame and usually you'll only have the one JFrame.

Maybe you are looking for

  • Error Message when Scheduling a report in Infoview

    I have created a report in Crystal Report using the Universe.  Report is saved to the Enterprise and set up to schedule in Infoview. When the report is scheduled for now or any other "when" time, I receive the error message: "Error in File C:\Program

  • Error while Quick PAR Upload!!!!

    Hi all,         When trying to do a Quick par upload I get the below error in the log file [01.12.06 / 14:21] #ERROR LEVEL# com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard$1 > Upload Error message: Upload seems to h

  • Mail doesn't send when used fromout an other app?

    I noticed many times that when I send an email from out another app, the message isn´t really send. I still have to go to the mail app, outbox, and give the command to send it. Is this normal?

  • Problems in accessing EJB from stand-alone client

    Hi, I am trying to access a EJB deployed in RI from a stand-alone client. When I run it, I got this exception: Exception in thread "main" java.rmi.AccessException: CORBA NO_PERMISSION 9998 Ma ybe; nested exception is: org.omg.CORBA.NO_PERMISSION: min

  • 'Link' button in Logic 7 Matrix Editor

    Can anybody help me with a niggle I have in Logic. Whenever I select Matrix Editor and want to drop into an existing midi recording I do so and a new editor window pops up obscuring the existing midi notes I want drop into. This is due to the Window