How to stop the process chain showing status as yellow but no process step

Dear Friends,
How to stop the process chain showing status as yellow but no process step is running in that process chain.
We have manually triggered the process chain for sales it finished successfully till load data but the next step is create index and DB statistics. Both of this steps are in unscheduled position only and no background job for this.
Please guide me.
Thanking you in advance.
Regards,
Shubhangi

Hi,
At times even I have faced this situation. During those times, running the Function module RSPC_PROCESS_FINISH by passing the right parameters came to my rescue.
Regards,
Raj

Similar Messages

How to stop the dock from showing all hidden images when hiding then showing applications

How to stop the dock from showing all hidden images when hiding then showing applications

It's not really something to snap a screen shot of. I believe it would need to be a video clip. For instance, when I am working on multiple images in Photoshop, I often need many images open at the same time, but I only have one image viewable and active. The hero image is active on screen while I hide the other images in the dock by hitting the yellow - button on the images. Then I "Hide" Photoshop to do something in the Finder. When I go back to Photoshop, every image that is hidden in the dock will pop open again in the active window, not just the image I was currently working on. I want these images to stay in the dock until I need them, no matter how many times I Hide the Show Photoshop.

My iPhone cannot check the balance and showing "CHECKING BALANCE MOBILE" but not process, what happened and what an i do?

My iPhone cannot check the balance and showing "CHECKING BALANCE MOBILE" but not process, what happened and what an i do?

If the computer iTunes is signed into the same account then contact iTunes:
How to report/refund an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase

How to stop the pages to show me MKD instead EUR and Can I pick valute for all pages??

I am booking flights or hotels and instead of the price to be in EUR or USD it gives me MKD, and I don't want to! I would like to choose the currency myself or stop the automatic change!
Thank you in advance,
ZK

hello, please contact the support of the sites where this is happening - there is not much that firefox or any other browser can do about it, since it only displays the content that gets transmitted from the sites - they might use your ip address to find out your approximate location and adjust the language/currency settings accordingly...

How to stop the keyboard from showing when checkbox is selected

Whenever a user checks off a checkbox, the keyboard appears.
How do I turn off this feature?

This is likely a web-site-specific issue. Can you share a link to the web page that behaves this way?

Help! about process chain execution status

hi:
we nearly have one problem about the process chain execution status,
when error occured during process chian execution, we fixed it in time,
however, even the error repaired, its status still showed yellow, and this
stop the subsequent process to excute.
Any body who can provide some help to solve this problem? thanks in advance
and looking forward to one reply.

Hi ,
Try this method
Open the messages of a failed step by right clicking on it and selecting 'display messages'.
In the opened popup click on the tab 'Chain'.
In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
1. copy the variant from the popup to the variante of table rspcprocesslog
2. copy the instance from the popup to the instance of table rspcprocesslog
3. copy the start date from the popup to the batchdate of table rspcprocesslog
Press F8 to display the entries of table rspcprocesslog.
Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
Now copy the entries of table rspcprocesslog to the input parameters of the function module like
described as follows:
1. rspcprocesslog-log_id -> i_logid
2. rspcprocesslog-type -> i_type
3. rspcprocesslog-variante -> i_variant
4. rspcprocesslog-instance -> i_instance
5. enter 'G' for parameter i_state (sets the status to green).
Now press F8 to run the fm.
Now the actual process will be set to green and the following process in the chain will be started and the chain can run to the end.
Regards,
Ravi

HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING IN THE PRODUCTION?

HI ALL,
CAN ANYONE TELL ME HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING DAILY AT 5.00 PM. I NEED TO STOP THE PROCESS CHAIN FOR COUPLE OF DAYS AND THEN RESTART IT AGAIN.
cAN ANYONE TELL ME THE PROCEDURE TO STOP THE ENTIRE PROCESS CHAIN RUNNING IN THE PRODUCTION.
THANKS
HARITHA

Hi,
First and foremost let me advice you to be very careful while doing this.
For Rescheduling
RSPC> chain > Goto > Planning view and
click on Execution tab > select > Remove from Schedule and then in Maintain variant of start process reschedule for the day you require it to run.
For terminating active chain
You can start from SM37, find the process WID/PID then go to SM50 or SM51 and kill it. Once its done come back to RSMO and check the request, it should be red but again manually force to red and save by clicking on the total status button in the status tab. This shuld ensure that the process is killed properly.
The next step will be to go to targets that you were loading and remove the red requests from those targets.
Note: For source system loads you may have to check if the request is running in the source system and kill if needed and pull it again.
But for BW datamart delta loads u may have reset the datamarts in case u are going to pull the delta again.
Re: Kill a Job
Re: Killing a process chain.
Regards,
JituK

How to stop the running process chain

How to stop the running process chains or infopackges...just qm status change is enought?

BI - SM 37 - Kill the Job
ECC - SM 50 - Kill the job

How to stop the upload process?

Hi,
i had by mistake started the other upload than the required!
How to stop the current upload process,( generally it takes lot of time to upload the data as data is huge )
Thanks,
Ravi

Hi Ravi Kottur
Just follow the things like Sunil suggested check one more just kill the process
manually and goto RSMO and in the Monitor QM status just Amke it red manually
for the load which you want to stop and then go to that particular info provider
Manage and delte the request..
Hope itz clear a little atleast...!
Thanks & Regards
R M K
***Assigning pointz is the only way of saying thanx in SDN ***
**Learning the thingz is never end process if u stop it will Be a devil if u continue it will be a divine***
> Hi,
>
> i had by mistake started the other upload than the
> required!
>
> How to stop the current upload process,( generally it
> takes lot of time to upload the data as data is huge
> )
>
>
> Thanks,
> Ravi

How to stop the backup process....

How to stop the backup process....
Okay, so it happens nearly everytime you synch your iPhone with your iTunes? Easy. As soon as it starts, hit the "X" in the bar where the backup process is being shown, this does NOT STOP the synching process, ONLY the backup process.
HOWEVER, keep in mind that a few times during the week (depends how often you synch ur iPhone) it will be good to let the backup process let run fully.
There we go. Problem solved...

i agree its what i do i backup whenever i add a new app, or take more pics etc its exactly what i do its what ive been saying on all these threads talking about backups etc, im hoping in 2.0.1 will be bug fixes about this sort of thing...

How can I stop the ringer from showing up on the screen?

How can I stop the ringer from showing up on the screen?

Use VMware Fusion? But seriously, Fusion does what you want. It just puts a mini VM control menu at the top when running full screen (and that's configurable, too), so the main menu bar doesn't appear at all. Which means that it's up to Parallels to handle this. Are you running Parallels 7, which is designed for Lion? If you are and Parallels still doesn't offer something similar, you need to contact Parallels.

How to stop the internal batch session

Hi ,
How to stop the internal batch session, which is triggered from the program.
When I execute the program, there is an batch session, which starts processing in parallel with the program, and causes an error message for the program, so the further process is affected.
I tried finding the session through the Transactions - SM35, SM37. However, I could find any session in my name.
However, when I try thro SM04, I could find an session with the same error message. But I am not able to end the session.
Pleas advise.
Thanks,
cartesian.

Go through transaction SM50. In case you have more than one application server (transaction SM51 will show) you can also use SM66 which will show all running processes on all application servers.
With SM50 you will only see the process running if it is running on the same application server you are logged on to.
Mark the process and use menu 'Program/Session - End Session' or 'Process - End with or without Core'
Hope that helps,
Michael

How to stop the running infospoke

Hi Experts,
there is a infospoke is still running so long time, it's incorrect, i'll cancel it as kick off the dependenies, i have no idea to how to stop the running infospoke. Anybody could tell me how to do it. thanks in advance.

hi denny,
Go to SM37 , find the job , stop the process
or
To stop the job find the job with the help of the request name ( TC - SM37 ),then in the job Details find the PID .
find the process in the process Overview (SM50 / SM51 ).
Set the restart to NO and Cancel the process without core
u can also see these threads that are already posted:
stopping v3 run job LIS-BW-VB_APPLICATION_02_010
how to cancel or change the background job which is scheduled
In SM37, for the job , click on Step button. Then from the menu Goto > variant. You can see the process chain name here.
sure it helps
Thanks
Varun CN

How to stop the background job "Sap_collector_for_job_statistic"

Dear All,
Kindly let me know how to stop the Background job "Sap_collector_for_job_statistic" which is running everyday.
We want to stop this background job.
Kindly suggest.
Regards,
Mullairaja

Select the Job using SM37 transaction. In the Menu Choose
Job ---> Cancel Active Job.
Before you do this it may be good idea to check the pid using SM50.
It will be using a Background work process. Check the pid and the status.
Select the same and in the Menu Choose Process --> Cancel with Core.
Refresh and check in SM37 for the Active and Cancelled Jobs.

How to stop the changes made for the BP in CRM not to update in R/3

Hello Gurus''
we are in need of help......i have an issue...the issue is
Wht ever the changes we do in crm , need to be not updated in r/3 ....for example if we change the the language for the BP 100 in CRM, it should not update in R/3
Where as in our case the data is updateing in R/3
Here by requesting you all to help me out how to stop the updaation of some changes which are made in CRM , that should not be in R/3
Point will be given......
Regards
sreeram Raghu

Hello
Thanks for ur reply.........
We have the following business process
We create BP with role prospect in CRM, once the prospect is ready to buy the product we conver the prospet in to customer and thesame customer is replicated in R/3 fro sales.
What i am looking at is for the customer we created in CRM if we change any data that should be updated in r/3..it may be nay like name address ...language....etc.....
can u help me out...as u told me to unassig/delete the subcription:All Business partner(MESG) under that we have --
>publication>All BP(MESG)->Replication object-->Bupa_Main
>Sites-->SQ1_300
If we do this process does the issue will fix or else we need to do soem thing more...
Thanks in advance
Regards
Sreeram Raghu
+91-99 94 94 82 72

How to stop the process chain showing status as yellow but no process step

Similar Messages

Maybe you are looking for