How to stop the report from Web!

hi,all!
Now I can start a report from Web with schedule parameter!Can you tell me how to stop the report via the Web server?Or tell me with which patameter.Thank a lot.

hello,
there is a CGI/Servlet command called killjob which you pass the job-id of the job you want to kill.
regards,
the oracle reports team --pw

Similar Messages

How to stop the Browser from caching my web pages

Hi There
Can anyone tell how to stop the browser from caching my jsp pages
I am using
<%response.setHeader("Cache-Control","no-cache");
response.setHeader("Pragma","no-cache");
response.setDateHeader ("Expires", 0);
%>
but this does not work anduser is able to go back to the previous page
which i dont want and i want the browser to display the message the page has expired
Help appreciated
Thanks
Mumtaz

response.setHeader("Cache-Control", "no-cache");
response.setHeader("Pragma", "no-cache");
response.setDateHeader("max-age", 0);
response.setDateHeader("Expires", 0);
I have cut paste the code from my jsp which is working. There is one additional line. I do not know if that is the cause but there is no harm in trying that out.
Srinivasan Ranganathan

Stop the report from firing until the user clicks the Go button?

Hi All,
Is there a way to stop the report from firing until the user clicks the Go button? At the moment it is populating when I open the dashboard page. I found something online that said i could use the Page Options>Save Current Settings> For Others.. but even though i am signed in as an administrator i only see a For Me.. option. Also, even after setting this option i would like to be able to hit the 'Go' button to run the report and have it uncollapse the section. Is this possible?
Thanks

Thanks for the replies,
In my report i am trying to constrain the report to todays data only. However the only prompt i have is for another column. If i place a filter on the date column with Year=0000 it will not change with the prompt selection and so will never return any results. Is there any other way?
It seems wasteful to fire a request to the database onload of the page. Is there an option to only fire a request what the prompts are entered? I will be using a stored proc which needs parameters to run the request so it would be good to be able to set the report to not run until it has parameters entered
Thanks

Regarding how to pass the data from web dynpro to workflow

hi gurus,
how to pass the data from web dynpro to workflow.
Regards
vijay

Check this [thread|SAP_WAPI_START_WORKFLOW;

How to pass the data from web dynpro to workflow.

hi gurus,
how to pass the data from web dynpro to workflow.
Regards
vijay

Hi
you can use function module
data   ls_input_container TYPE swr_cont.
data   lt_input_container TYPE TABLE OF swr_cont.
CALL FUNCTION 'SAP_WAPI_START_WORKFLOW'
    EXPORTING
      task            = ptask
    IMPORTING
      return_code     = lv_return_code
      new_status      = lv_new_status
    TABLES
      input_container = pinput_container
      message_lines   = lt_message_lines
      message_struct = lt_message_struct.
where you pass the data in imnternal table "pinput_container" as
ls_input_container-element = 'KUNNR'.
ls_input_container-value = ls_skna1-kunnr ."wd_this->lv_kunnr.
APPEND ls_input_container TO lt_input_container .
ls_input_container-element = 'CLUSER'.
ls_input_container-value = lv_cluser.
APPEND ls_input_container TO lt_input_container .
ls_input_container-element = 'BUKRS'.
ls_input_container-value = lv_bukrs. " youe value as per requirement.
APPEND ls_input_container TO lt_input_container .
ls_input_container-element = 'VKORG'.
ls_input_container-value = ls_sknvv-vkorg. " youe value as per requirement
APPEND ls_input_container TO lt_input_container .
ls_input_container-element = 'VTWEG'.
ls_input_container-value = ls_sknvv-vtweg. "youe value as per requirement.
APPEND ls_input_container TO lt_input_container .
ls_input_container-element = 'SPART'.
ls_input_container-value = ls_sknvv-spart. "youe value as per requirement.
APPEND ls_input_container TO lt_input_container .
*Also Forgot to mention where ptask is your workflow ID *
Regards,
Arvind
Edited by: Arvind Patel on May 14, 2010 7:38 AM

How to stop the Dialog from being dragged

I was hoping that someone could tell me when calling a Dialog from Jframe, a how to stop the Dialog from being dragged
while a dialog is showing.
When it is visible I can still click and drag the Dialog
I want to set it so you can not drag it until the dialog has be closed.

If you don't have access to the parent frame, a "hack" that usually works:
Frame frame = Frame.getFrames()[0];
if (null != frame && frame instanceof JFrame){
JFrame jf = (JFrame)frame;
JDialog jd = new JDialog(jf, "title");
... code here ...
As each JFrame (or Frame) is opened, its stored in the array of Frames that you can get. Same thing with Dialog.getDialogs(). Almost always, at least so far for me I've never had this problem, the [0] index is the main window opened, or the parent/top frame. I'd put the check in there to be safe and make sure its a JFrame and usually you'll only have the one JFrame.

How to stop the users from changing the Decimal in SAP

How to stop the users from changing User Profile

Hai,
It is not possible to restrict SU3 to display, because it has only S_TCODE has the authorization object.
If you really want to restrict users from changing their profile you have to remove the SU3 access and give SU1 or SU2 which gives access only to Personnel details and Parameters.
Hope this helps.
Regards,
Yoganand.V

How to stop the Calendar from editing your input?

How to stop the Calendar from editing your input?

I am constantly finding that Calendar Version 8.0 thinks it knows what I want to type but it incorrectly takes numbers and days and times out of my input and changes my appointments. I hate this new supposedly "smart" feature. Even when I edit my event correctly a second or third time it rewrites my input incorrectly again. I have to use my iPhone to override the annoying editing on my mac. I am ready to find a new calendar program unless Apple allows users to input what they want without their information being incorrectly edited.

How to stop the dock from showing all hidden images when hiding then showing applications

How to stop the dock from showing all hidden images when hiding then showing applications

It's not really something to snap a screen shot of. I believe it would need to be a video clip. For instance, when I am working on multiple images in Photoshop, I often need many images open at the same time, but I only have one image viewable and active. The hero image is active on screen while I hide the other images in the dock by hitting the yellow - button on the images. Then I "Hide" Photoshop to do something in the Finder. When I go back to Photoshop, every image that is hidden in the dock will pop open again in the active window, not just the image I was currently working on. I want these images to stay in the dock until I need them, no matter how many times I Hide the Show Photoshop.

HT2188 How to stop the battery from draining

How to stop the battery from draining

I tried everything to stop my battery from draining on my iPad 2 since I have downloaded IOS 7.... Without success. Very disappointed with IOS 7 so far. Apple please release a patch to stop the battery from draining. It is urgent. My iPad is now useless, it is always drained to 0% everytime I open my iPad!?!?!

How to cancel a report from web?

i want to cancel some reports i have made from web.
i have made two kinds of reports,one from web using /cgi-
bin/rwcgi60.exe?runrep... and another from DOS command line
using rwcli60.exe.Then i use /cgi-bin/rwcgi60.exe/showjobs?
server=myreportserver and the web shows all the report jobs.
i can kill report jobs from the web while clicking on the
coloum 'job status',but i can't cancel all the jobs.that is to
say i can cancel the jobs made from rwcgi60.exe?runrep... and
cant cancel the jobs made from Dos because i have no privileges
and the two kinds of reports belong to different owners.
i can cancel them all from report queue manager using
ADMINISTRATOR,but i must made the two kinds of report from web
and dos and must cancel them all from web.
anybody can help me how to solve the problem?
another question:can i assign the report's owner to a special
personal while using rwcgi.exe and rwcli60.exe?
thanks in advance!

Hi,
The below link will be very useful for one who need idea on calling Oracle Report from Java Application,
http://www.oracle.com/technology/products/reports/htdocs/getstart/examples/reportswebservice/index.html
Thanks & Rgds,
M T

How to stop the executable from starting when opened

Hi Guys,
I am building an exe with the application builder. I am not able to find a way to stop the exe from running when opened. I dont need the exe to run. I know I m missing a very basic step here but I m not able to do that.
Could anyone explain me how to do this.
Regards,
Nitin

Hello,
This is Dominic L. from Applications Engineering at National Instruments. This was reported to R&D (CAR#41DAPUQU) and was fixed in LabVIEW 8.2.1. Here is a link to the current evaluation software download for LabVIEW:
http://digital.ni.com/demo.nsf/websearch/14f9ce475127ade786256ac60070926c?opendocument
This particular bug actually renders all the build options for source file settings unusable. While the other options can be set manually in the source VI properties, the start-up VI will always run when an executable is opened.
Here are three different workarounds to this:
Option 1 - Upgrade to 8.2.1.
Option 2 - Check "Enable debugging" and "Wait for debugger on launch" in the Advanced page of the build specification. One side effect is this will include the block diagrams of the VIs and extra code for debug tool support. Note that if you don't protect the source code (block diagram), it kind of defeats the purpose of creating an executable.
Option 3 - Use a dummy startup VI to launch the desired startup VI.
For the third workaround, the attached "Dummy Startup VI.vi" uses VI server to open the desired startup VI's front panel and then closes. To use the Dummy Startup VI follow these steps:
Add the Dummy Startup VI to the project.
Open the Dummy Startup VI and change "Main VI.vi" to the VI you would like to open but not run in the project and save.
In the source files page of the build, select the Dummy Startup VI as a startup VI and the VI you would like to open but not run as a support VI.
Build and run.
I hope this helps.
Have a great evening!
Best Regards,
Dominic L.
Attachments:
Dummy Startup VI.vi ‏12 KB

How to call BI report from web dynpro

Hi ,
How to call BI report from webdynpro application and what are the prerequisites for that .
Please provide an example to work with BI application frame UI element
Thanks

Hi Rajpal,
Please go through this..
calling BI report
Cheers,
Kris.

Anyone know how to stop the slideshow from looping?

Does anyone know which file to edit in order to stop the slideshow from looping? Where the code would be or, what code to add.
I am not aware of a setting from within iweb itself.
I assumed it was the slideshow.js file but I didn't find anything in there.
Such as a loop "true"
HELP

That worked great.
I assume what we are doing is copying and editing the
.mac slideshow file,
and then pointing to it's location in the folder. How
Yes, that's exactly it.
did you know what the code would be? I guess you must
be very Java savy, because it definetly wasn't an
obvious one.
It took me two days to reverse engineered dot mac slideshow
Is there a way to get the slideshow window to close
after it's finished? What I get is a freeze frame on
the last photo of the show.
I know you gonna ask that yes, change the added line in slideshow.js to this:
if (count == ((imgs.length) - 1)) { this.pause(); setTimeout("window.close()", 5000); }; // close window after 5 sec, change 5000 to whatever you like.

[SOLVED]How to stop the screen from shutting it self off?

First of all, spare me the "search/man/wiki-first"-talk becouse I have already done that as far as my knowledge of the subject reach. If you think you seen a thread like this with a solution, please link to it without any retarded comments.
Now to my question: How do I , from the commandline, stop the display from shutting it self off automatically after awhile?
Last edited by whacath (2010-02-19 11:27:12)

To disable DPMS and screen blanking:
xset -dpms s off

How to stop the report from Web!

Similar Messages

Maybe you are looking for