How to stop the upload process?

Hi,
i had by mistake started the other upload than the required!
How to stop the current upload process,( generally it takes lot of time to upload the data as data is huge )
Thanks,
Ravi

Hi Ravi Kottur 
Just follow the things like Sunil suggested check one more just kill the process
manually and goto RSMO and in the Monitor QM status just Amke it red manually
for the load which you want to stop and then go to that particular info provider
Manage and delte the request.. 
Hope itz clear a little atleast...!
Thanks & Regards
R M K
***Assigning pointz is the only way of saying thanx in SDN ***
**Learning the thingz is never end process if u stop it will Be a devil if u continue it will be a divine***
> Hi,
>
> i had by mistake started the other upload than the
> required!
>
> How to stop the current upload process,( generally it
> takes lot of time to upload the data as data is huge
> )
>
>
> Thanks,
> Ravi

Similar Messages

  • How to stop the running process chain

    How to stop the running process chains or infopackges...just qm status change is enought?

    BI - SM 37 - Kill the Job
    ECC - SM 50 - Kill the job

  • How to stop the backup process....

    How to stop the backup process....
    Okay, so it happens nearly everytime you synch your iPhone with your iTunes? Easy. As soon as it starts, hit the "X" in the bar where the backup process is being shown, this does NOT STOP the synching process, ONLY the backup process.
    HOWEVER, keep in mind that a few times during the week (depends how often you synch ur iPhone) it will be good to let the backup process let run fully.
    There we go. Problem solved...

    i agree its what i do i backup whenever i add a new app, or take more pics etc its exactly what i do its what ive been saying on all these threads talking about backups etc, im hoping in 2.0.1 will be bug fixes about this sort of thing...

  • PFRD 11.1.1.4 - How to stop the In-process Reports Server

    I'm running an "out-of-the-box" PFRD 11.1.1.4 installation in Windows XP SP3.
    According with documentation:
    http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_strt006.htm#BEHDJFHD
    To directly start or stop the in-process Reports Server using a URL, enter the following in your Web browser:
    http://machine_name:port/reports/rwservlet/startserver
    http://machine_name:port/reports/rwservlet/stopserver
    startserver works.
    stopserver returns:
    REP-50171 : Authentication failed.
    Tried
    http://machine_name:port/reports/rwservlet/stopserver?authid=weblogic/passwd
    same error.
    Commented the line:
    <!--security class="oracle.reports.server.RWJAZNSecurity" id="rwJaznSec"/-->
    in rwserver.conf.
    Same error.
    The only uncomented elements in "rwservlet.properties" (original configuration) are
    <server>rep_wls_reports_pfurtado-lap_asinst_1</server>
    <singlesignon>no</singlesignon>
    <inprocess>yes</inprocess>
    Did any of you managed to stop "in-process" reports server using the reports servlet?
    What credentials did you use?
    Thanks & Best Regards
    Paulo

    Thanks RZ!
    The line you mentioned was already as you described.
    According with the documentation:
    [Starting and Stopping Reports Server|http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_strt001.htm#i1005629]
    If Reports Server is running as an in-process server through the Reports Servlet, issue the following URL:
    http://your_host_name:port_number/reports/rwservlet/stopserver?authid=admin user/admin password
    Note:
    authid is Reports Server's administration user name and password. In Oracle Reports 11g Release 1 (11.1.1), the default security is based on standards-based Java EE security model through Oracle Platform Security Services. For a non-secure Reports Server, this user is defined in the identifier element.
    I added the identifier element to rwserver.conf and restarted WLS_REPORTS, but after this the in-process reports server failed to start with the usual generic exception.
    I finally found the missing step in:
    How To Secure Showjobs Web Command In A Non Secured Reports Server In Oracle Report 11g? (Doc ID 1242614.1)
    The thing is that the identifier element has to be placed in the right location inside rwserver.conf:
    The needed change is:
    FROM
    <queue maxQueueSize="1000"/>
    <pluginParam name="mailServer" value="%MAILSERVER_NAME%"/>
    TO
    <queue maxQueueSize="1000"/>
    <identifier encrypted="no">....type here your user/password....</identifier>
    <pluginParam name="mailServer" value="%MAILSERVER_NAME%"/>
    So although using the default non-secure reports server, the identifier element has to be present in rwserver.conf for rwservlet/stopserver to work as described above.
    Otherwise the needed authentication will fail as described.
    Regards
    Paulo

  • How to stop the boot process after the GRUB menu?

    Hello there.
    I am getting an error message in the boot process, after the GRUB menu, but I can't read completely the message because it is shown too fast. So, how can I stop the process when I see the error message, for writing down it?
    Thanks in advance.

    zuargo wrote:
    Hello there.
    I am getting an error message in the boot process, after the GRUB menu, but I can't read completely the message because it is shown too fast. So, how can I stop the process when I see the error message, for writing down it?
    Thanks in advance.
    I didn't try this before, but if you use systemd, you may want to try systemd.confirm_spawn to invoke interactive booting process, so you can start the services one by one manually therefore locate the one throwing out error message.
    It is explained in the systemd manual:
    http://www.freedesktop.org/software/sys … stemd.html

  • An error ocurred while installing os x - how to stop the upgrade process?

    Hello:
    I tried a lot of ways, entered on safe mode and redownloaded the upgrade, booted on recovery mode to check the disk (no errors), restarted the upgrade several times, I erased /Library/Updates... all of these I did several times but no luck...
    How do I get it to stop trying to ugrade on reboot? the only way I can get into the old os is in safe mode, righ now i only want to get into the old os ... Any advise?

    Hello:
    I tried a lot of ways, entered on safe mode and redownloaded the upgrade, booted on recovery mode to check the disk (no errors), restarted the upgrade several times, I erased /Library/Updates... all of these I did several times but no luck...
    How do I get it to stop trying to ugrade on reboot? the only way I can get into the old os is in safe mode, righ now i only want to get into the old os ... Any advise?

  • HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING IN THE PRODUCTION?

    HI ALL,
    CAN ANYONE TELL ME HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING DAILY AT 5.00 PM. I NEED TO STOP THE PROCESS CHAIN FOR COUPLE OF DAYS AND THEN RESTART IT AGAIN.
    cAN ANYONE TELL ME THE PROCEDURE TO STOP THE ENTIRE PROCESS CHAIN RUNNING IN THE PRODUCTION.
    THANKS
    HARITHA

    Hi,
    First and foremost let me advice you to be very careful while doing this.
    For Rescheduling
    RSPC> chain > Goto > Planning view and
    click on Execution tab > select > Remove from Schedule and then in Maintain variant of start process reschedule for the day you require it to run.
    For terminating active chain
    You can start from SM37, find the process WID/PID then go to SM50 or SM51 and kill it. Once its done come back to RSMO and check the request, it should be red but again manually force to red and save by clicking on the total status button in the status tab. This shuld ensure that the process is killed properly.
    The next step will be to go to targets that you were loading and remove the red requests from those targets.
    Note: For source system loads you may have to check if the request is running in the source system and kill if needed and pull it again.
    But for BW datamart delta loads u may have reset the datamarts in case u are going to pull the delta again.
    Re: Kill a Job
    Re: Killing a process chain.
    Regards,
    JituK

  • How to stop the process chain showing status as yellow but no process step

    Dear Friends,
    How to stop the process chain showing status as yellow but no process step is running in that process chain.
    We have manually triggered the process chain for sales it finished successfully till load data but the next step is create index and DB statistics. Both of this steps are in unscheduled position only and no background job for this.
    Please guide me.
    Thanking you in advance.
    Regards,
    Shubhangi

    Hi,
      At times even I have faced this situation.  During those times, running the Function module RSPC_PROCESS_FINISH by passing the right parameters came to my rescue.
    Regards,
    Raj

  • How do I stop the login process when I open iTunes?

    How do I stop the login process when I open iTunes? It often request I login sometimes twice.

    I amhaving the same issue of having to log into  my apple account wheever I open I-Tunes. In my iTunes sharing my password requirment is unchecked and in filevault it is unchecked also. I have just upgraded to the newest version of iTunes and I still get the pop-up window asking me to login.
    Any other thoughts?
    thank you

  • How to stop the duplicate idoc processing ? whar need to done SAP R/3

    Hi All
    If the Same Idoc is processed to SAP R/3 then what to do for not processing
    the duplicate IDOC ?
    Or some thing like this...
    If by mistake same idoc processed then how to avoid to process the idoc?
    what i need to in SAP R/3 side?
    Regards
    Kiran lvs

    Hi
    some thing like this:Using T.code: we19 ...Idoc processed a day ago
                                           today by using the same t.code we19 ..processed the
                                           same  idoc, what  i sent a day ago.
                                           Here how to stop this duplicate processing ?
    I hope this is clear...else pl put a note
    regards
    Kiran lvs

  • CS6 3d: how do I stop the rendering process?

    How do I stop the rendering process in CS6 3d? You used to be able to just click the mouse.

    Steve:
    Thanks for working with me on this. I'm not much of a techie, so bear with me. This is the info I think you were referring to. If it's not, just let me know and I'll try and get it.
    Hardware Overview:
      Model Name:     iMac
      Model Identifier:     iMac10,1
      Processor Name:     Intel Core 2 Duo
      Processor Speed:     3.06 GHz
      Number of Processors:     1
      Total Number of Cores:     2
      L2 Cache:     3 MB
      Memory:     12 GB
      Bus Speed:     1.07 GHz
    Chipset Model:     ATI Radeon HD 4670
      Type:     GPU
      Bus:     PCIe
      PCIe Lane Width:     x16
      VRAM (Total):     256 MB
      Vendor:     ATI (0x1002)
      Device ID:     0x9488
      Revision ID:     0x0000
      ROM Revision:     113-B8030C-253
      EFI Driver Version:     01.00.367
    If you have any questions or concerns please don't hesitate to contact me.
    Dennis

  • How can we stop the Collapse process in process chain.

    hi
    guys
             How can we stop the Collapse process in process chain.if any one know's plz tell me
    your regards
    suresh

    Hi,
    All the above post duly suggest a the methods we usually follow to cancel a collapse request i.e sm37 ---> Cancel without core,but these solution only applies if we are running collapse as a seperate variant in the process chain, in case its running as a part of change run the all above process will lead to the locking of the target.
    In that case if you could "lock the target" even before the collapse ran will result in the "Stopping of the collapse on the target automatically" .
    As far as figuring out the exat job of the collapse, you can directly get the job details in the "display message' , context menu option of the "Collapse variant" in the chain, clicking on the batch monitor and then clicking on the job to get its detail,then going to the specific "Application server " via SM51 and cacelling the job.
    Do check wearther the target is unlocked or not in sm12 if not then choose the object in se03 and select "Unlock".
    Hope it will serve yoour purpose
    Thax & Regards
    Vaibhave Sharma

  • How can I stop the install process?

    How can I stop the install process? It tells me my disk is damaged and to restart and repair, but when I restart it tries to install again....it's a never ending cycle. I'd rather keep the system I have than continue this mess.

    Hello Serau1s,
    It sounds like you are installing Mavericks, and are being prompted to restart and repair your hard drive, but when the computer restarts it goes back to the installation process. The following article should help you get that disk repaired by getting you to the recovery partition, named:
    Disk Utility 12.x: Repair a disk
    http://support.apple.com/kb/PH5836
    Print this help page so you can refer to it later. (You don’t have access to Disk Utility Help when you restart up your computer in the next step.)In the Disk Utility Help window, choose Print from the Action pop-up menu (looks like a gear).
    Choose Apple menu > Restart. Hold down the Command (⌘) and R keys as your computer restarts.When you see a white screen with an Apple logo in the middle, you can release the keys.
    Click Disk Utility, and then click Continue.
    In the list at the left, select the item you want to repair. (Be sure to select an item that’s indented to the right in the list, not an item at the far left.)
    Click First Aid.
    If Disk Utility tells you the disk is about to fail, back it up and replace it. You can’t repair it.
    Click Repair Disk.If Disk Utility reports that the disk appears to be OK or has been repaired, you’re done. Otherwise, you may need to do one of the following steps.
    If Disk Utility reports “overlapped extent allocation” errors, two or more files occupy the same space on your disk, and at least one of them is likely to be corrupted. Check each file in the list of affected files. If you can replace a file or recreate it, delete it. If it contains information you need, open it and examine its data to make sure it hasn’t been corrupted. (Most of the files in the list have aliases in a DamagedFiles folder at the top level of your disk.)
    If Disk Utility can’t repair your disk or it reports “The underlying task reported failure,” try to repair the disk or partition again. If that doesn’t work, back up as much of your data as possible, reformat the disk, reinstall Mac OS X, and then restore your backed-up data.If you continue to have problems with your disk, it may be physically damaged and need to be replaced.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Problem: An error occured during the uploading process.

    Hello!  I've searched around but I am having difficulty finding a solution to this problem.
    I am trying to upload videos through Adobe Premiere Elements 9 to YouTube, using the preset options in the share tab.  This worked previously without issue, but then one day I continually ran into an error stating "Sorry, an error occured during the uploading process.  Please try again later."  However, it eventually started working.  It is now a few weeks later, and I am having the very same issue.  I am unable to upload to YouTube or any other service through the Share tab.  Even loading the software itself, the opening splash screen is unable to grab my Adobe ID.  It never stops "Gathering User Info..."
    Steps I have tried:
    Going to Edit -> Preferences -> Web Sharing and hitting the refresh button to update settings.
    Checked router settings.
    Enabled DMZ on router and linked it to this specific computer.
    Rebooted PC and router, and tried updating the Web Sharing settings multiple times.
    I honestly do not believe it to be a router issue, especially since it is currently in DMZ mode and I have had absolutely no trouble with any other software.  This has continued to baffle me though, and finding help is difficult.  Searches keep giving me encoding settings for YouTube videos, and few results pertain to this particular issue.
    I am aware I could export the video normally and upload through YouTube that way, but on DSL, my upload speed is pretty terrible for a high quality video.  The YouTube HD setting has been great for me in the past, as files are small but still look great online.  I would really like to get it working again, both for ease and convenience for simple projects.
    If anyone has any ideas as to what could be causing a problem, I would be greatly appreciative of any advice.  In regards to the project itself, there is no real editing being done at this point, as I am trying to eliminate any possibility of error elsewhere. I opened a new project, added a video clip and went directly to upload it, resulting in the error above.
    I don't believe it matters in this situation, but just in case:
    Windows 7
    AMD Phenom II X4 820 - 2.80 GHz
    6 GB RAM
    Radeon HD 5880 1GB
    Connecting through a Netgear WNDR3400 router, standard DSL connection.

    Sorry, not seeing where to edit my original post.
    Just wanted to add, that I am able to visit both the Photoshop.com website, as well as YouTube through my browser.  So I am not being blocked somehow to those particular sites.  It only seems to be through the software that I cannot connect to any of the online services to upload videos to.
    Additionally, the only virus software running is Microsoft Security Essentials.  It has never raised a flag before with this software or caused interference in the past.  I do not use Norton or any other service which are known to interfere with programs often.
    Just a quick example as well, pinging Photoshop.com through the command prompt shows I am getting through just fine.  As you can see in this image though, it cannot seem to ever connect and grab my user information.
    http://i.imgur.com/S53xN.png

  • How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share form

    How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
    To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips.  This operation has been stalled by the spinning ball. Shut down restart has not helped.
    The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
    What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

    How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
    To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips.  This operation has been stalled by the spinning ball. Shut down restart has not helped.
    The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
    What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

Maybe you are looking for