How to store character in file and display result on front panel

hi
currently i m working on FPGA project.i want to aquired data from FPGA board.i want to know about how to store character to file and contineous display each character on front panel in string format.
i have complete up to character display on front panel but only single character display when i want all character in string format.
Solved!
Go to Solution.

I don't see how this question is at all related to Digital I/O but it sounds like you just need a shift register with the concantanate string function.

Similar Messages

  • How to upload the tif file and Display into Iframe

    Hi all,
       My requirement is to upload 'n' number of tif files and display the file name in dropdown.
       If i select the file name, it should display the file in Iframe.
    My problem is i am not able to upload the tif file.
    try{
          byte []by=new byte[wdContext.currentContextElement().getPhotoResource().read(true).available()];
          wdContext.currentContextElement().getPhotoResource().read(true).read(by);
          String ext=wdContext.currentContextElement().getPhotoResource().getResourceType().getFileExtension();
          WDWebResourceType res=wdContext.currentContextElement().getPhotoResource().getResourceType();
          IWDResource resource=null;
          resource=WDResourceFactory.createResource(by,"sample",WDWebResourceType.getWebResourceTypeForFileExtension(ext));
           wdContext.currentContextElement().setPhoto(resource.toString());
              catch(Exception e){
    In the above code Photo is Iframe Context variable.
    If i upload tif file means it directly giving Save and Open options is giving.
    Please how to slove this probelm...........................
    Thanks,
    Suni

    Hi Satya,
    In HTML a TIF file can be displayed as"
    <html>
    <body>
    <object height="100%" width="100%"
    type="image/tiff" data="PO.tif">
    </object>
    </body>
    </html>
    Hope it helps.
    Regards,
    Alka

  • How to capture an image from my usb camera and display on my front panel

    How to capture an image from my usb camera and display on my front panel

    Install NI Vision Acquisition Software and NI IMAQ for USB and open an example.
    Christian

  • How to load the bitmap file programmatically in to the front panel?

    I wanted to load Bitmap file programmatically in to the front panel. Can any one guide me ?

    Very simple.
    1) Put picture indicator on the FP.
    2) Use "Read BMP" vi.
    3) Use draw flattened pixmap vi.
    4) Connect all outputs of "Read BMP" to all inputs "Draw flattened pixmap".
    5) Connect output new picture of "Draw ..." to picture indicator.
    Attached example of this procedure.
    Attachments:
    read_bmp.zip ‏5 KB

  • How to open a Excel file and display on the custom screen

    Guys, I am new to screen programming. In my first screen (SCREEN #9000) I want to put a field, where I must be able to select a file from my desktop and when I click the DISPLAY button, it should suck all the data from the spread sheet in to an internal table, and should display the next screen  (SCREEN #9001), displaying the data from the internal table along with a button called LOAD. Now when I click the LOAD button after reviewing the data, it must load the data to my custom table in R/3. I know how to load an Excel spreadsheet to R/3 without the custom screens. But my requirement now is to do from custom screens like I mentioned above. Any ideas how to do this? Thanks.
    Dan

    Hi Dan,
    In my first screen (SCREEN #9000) I want to put a field, where I must be able to select a file from my desktop and when I click the DISPLAY button, it should suck all the data from the spread sheet in to an internal table, and should display the next screen (SCREEN #9001)
    For  this create a MPP program and create a Push button. Write the code for this to open a file like use f4_filename.From here you are able to select a file.
    + displaying the data from the internal table along with a button called LOAD. Now when I click the LOAD button after reviewing the data, it must load the data to my custom table in R/3.+
    With the above you are able to open a file and now you have to load that data into internal table. Select the file from the desktop.
    Totally you have to create 1) Screen 2) Push button( Open File) 3) Load data ( From file) .
    [Create Push Buttons|http://help.sap.com/saphelp_nw70/helpdata/en/9f/dba9a635c111d1829f0000e829fbfe/content.htm]
    Check this if there is any please post.
    Regards,
    Madhu.

  • How to Get Input From User and Display Result

    Hi ,
    I need to get 2 inputs from user and to display it's Mutilple Value.
    The Below Code is working fine to get 2 Input's from user,but it display a Junk value as a Result .How to
    overcome this Problem. I need to display it's Mutilple(a*b) value of "a " and " b".
    import java.io.*;
    class Mul{
    static int a=0;
    static int b=0;
    static int Count=0;
    public static void main(String args[])throws IOException{
    BufferedReader br =new BufferedReader(new InputStreamReader(System.in));
    do{
    a=(char)br.read();
    Count++;
    b=(char)br.read();
    if(Count==2)
    System.out.println("The Multiplied Value is "+a*b);
    }while(Count<2);
    }

    Hi ,
    I need to get 2 inputs from user and to display it's
    Mutilple Value.
    The Below Code is working fine to get 2 Input's from
    user,but it display a Junk value as a Result .How
    to
    overcome this Problem. I need to display it's
    Mutilple(a*b) value of "a " and " b".
    import java.io.*;
    class Mul{
    static int a=0;
    static int b=0;
    static int Count=0;
    public static void main(String args[])throws
    IOException{
    BufferedReader br =new BufferedReader(new
    InputStreamReader(System.in));
    do{
    a=(char)br.read();This line will get you the ascii-value of the typed character.
    This line will not get you the value typed in.
    Try looking for Integer.parseInt()...
    Count++;
    b=(char)br.read();
    if(Count==2)
    System.out.println("The Multiplied Value is "+a*b);
    }while(Count<2);

  • Hi i am new to labview. i want to extract data from a text file and display it on the front panel. how do i proceed??

    Hi i am new to labview
    I want to extract data from a text file and display it on the front panel.
    How do i proceed??
    I have attached a file for your brief idea...
    Attachments:
    extract.jpg ‏3797 KB

    RoopeshV wrote:
    Hi,
    The below code shows how to read from txt file and display in the perticular fields.
    Why have you used waveform?
    Regards,
    Roopesh
    There are so many things wrong with this VI, I'm not even sure where to start.
    Hard-coding paths that point to your user folder on the block diagram. What if somebody else tries to run it? They'll get an error. What if somebody tries to run this on Windows 7? They'll get an error. What if somebody tries to run this on a Mac or Linux? They'll get an error.
    Not using Read From Spreadsheet File.
    Use of local variables to populate an array.
    Cannot insert values into an empty array.
    What if there's a line missing from the text file? Now your data will not line up. Your case structure does handle this.
    Also, how does this answer the poster's question?

  • How to control the size/posit​ion of LabVIEW DLL front panel in MFC applicatio​n?

    I would like to make a MFC application which loads a DLL generated by LabVIEW application builder. How can I control the size and position of the front panel in my MFC application? Thanks.

    Did you build the DLL from Labview yourself? If so, you just add another VI to the list. This VI accepts the Title of a front panel and top,left,right,bottom value of the front panel (VI property WindowBond). I'm not familiar with building DLLs using Labview so I really could not help you on how to build the DLL, but I believe it can be done (multiple VIs as multiple functions in a single DLL).
    To get the windows bonds for a vi, you need to use VI server property. Check out the examples under labview directory. There are plenty of them to demostrate how to use this feature.
    Joe

  • I need to read data from a text file and display it in a datagrid.how can this be done..please help

    hey ppl
    i have a datagrid in my form.i need to read input(fields..sort of a database) from a text file and display its contents in the datagrid.
    how can this  be done.. and also after every few seconds reading event should be re executed.. and that the contents of the datagrid will keep changing as per the changes in the file...
    please help as this is urgent and important.. if possible please provide me with an example code as i am completely new to flex... 
    thanks.....  

    It's not possible to read from a file without using classes from the core API*. You'll have to get clarification from your instructor as to which classes are and are not allowed.
    [http://java.sun.com/docs/books/tutorial/essential/io/]
    *Unless you write a bunch of JNI code to replicate what the java.io classes are doing.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?

    I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?
    Attachments:
    try2.txt ‏2 KB
    read_array.vi ‏21 KB

    The problem is in the delimiters in your text file. By default, Read From Spreadsheet File.vi expects a tab delimited file. You can specify a delimiter (like a space), but Read From Spreadsheet File.vi has a problem with repeated delimiters: if you specify a single space as a delimiter and Read From Spreadsheet File.vi finds two spaces back-to-back, it stops reading that line. Your file (as I got it from your earlier post) is delimited by 4 spaces.
    Here are some of your choices to fix your problem.
    1. Change the source file to a tab delimited file. Your VI will then run as is.
    2. Change the source file to be delimited by a single space (rather than 4), then wire a string constant containing one space to the delimiter input of Read From Spreadsheet File.vi.
    3. Wire a string constant containing 4 spaces to the delimiter input of Read From Spreadsheet File.vi. Then your text file will run as is.
    Depending on where your text file comes from (see more comments below), I'd vote for choice 1: a tab delimited text file. It's the most common text output of spreadsheet programs.
    Comments for choices 1 and 2: Where does the text file come from? Is it automatically generated or manually generated? Will it be generated multiple times or just once? If it's manually generated or generated just once, you can use any text editor to change 4 spaces to a tab or to a single space. Note: if you want to change it to a tab delimited file, you can't enter a tab directly into a box in the search & replace dialog of many programs like notepad, but you can do a cut and paste. Before you start your search and replace (just in the text window of the editor), press tab. A tab character will be entered. Press Shift-LeftArrow (not Backspace) to highlight the tab character. Press Ctrl-X to cut the tab character. Start your search and replace (Ctrl-H in notepad in Windows 2000). Click into the Find What box. Enter four spaces. Click into the Replace With box. Press Ctrl-V to paste the tab character. And another thing: older versions of notepad don't have search and replace. Use any editor or word processor that does.

  • How do I process multiple files and turn them from raw to jpeg

    How do I process multiple files and turn them from raw to jpeg. Ive tried and it seems to go through the files but doesnt seem to process them or store them in the selected folder

    Yes that was the first thing I did. Then I used the process multiple files and selected a new folder to put them in and selected use open files and selected to turn them into jpeg. The images flash on the screen like they are being processed, but the folder never appears in library. Is it possible because there are a couple 16 bit files open that this corrupts the task. Do I need to create the folder first. Will elements not create the folder on its own.
    Thanks Vince

  • How to store an Excel file in InfoPath for users to edit

    Hello,
    I need an example on how to store an Excel file within InfoPath 2010 so that every time a user opens the InfoPath form they can make changes and can save as part of the form. The next user opens the form and another Excel files (blank) where they make changes and
    saves. Thanks

    Streamlining this would require a bit of custom work I imagine. However if you don't mind giving the users some extra clicks, there are probably a few ways to get the job done.
    You could upload the excel file to SharePoint, make sure it's read-only and link to it within the InfoPath form. Then the process would be that users open the InfoPath form, fill it out, download the excel doc to their desktops and fill it out, and then
    attach it to the IP form.
    Or you could set up a separate, sister library where the New Item defaults to your Excel template. Then from within the InfoPath form you could have a hyperlink that creates the new item, saving it to the library. The caveat here is finding a way to link
    to the two items together with a unique identifier. The benefit though is being able to browse and interact with Excel docs independent of the forms they are attached to, if necessary.

  • How to store the zip file in oracle table?

    hi,
    How to store the zip file in oracle table ?
    is it possible to unzip and read the file ?
    Thanks
    Rangan S

    SQL> DESC BLOB_TABLE;
    Name Type Nullable Default Comments
    A INTEGER Y
    B BLOB Y
    SQL> INSERT INTO BLOB_TABLE VALUES(5,BLOB('MWDIR_TST','TEST.ZIP'));
    INSERT INTO BLOB_TABLE VALUES(5,BLOB('MWDIR_TST','TEST.ZIP'))
    ORA-00904: "BLOB": invalid identifier
    SQL> INSERT INTO BLOB_TABLE VALUES(5,('MWDIR_TST','TEST.ZIP'));
    INSERT INTO BLOB_TABLE VALUES(5,('MWDIR_TST','TEST.ZIP'))
    ORA-00907: missing right parenthesis
    SQL> INSERT INTO BLOB_TABLE VALUES(5,('\\MWDIR_TST\TEST.ZIP'));
    INSERT INTO BLOB_TABLE VALUES(5,('\\MWDIR_TST\TEST.ZIP'))
    ORA-01465: invalid hex number
    SQL> INSERT INTO BLOB_TABLE VALUES(5,('\\MWDIR_TST\TEST.ZIP'));

  • Multiple MailAttachment  to File   -   How to store as multiple files ?

    Hi Friends ,
                      Can you please tell me  How to Store as Multiple files which i read as attachements  from Mail Sender Adapter .
                         In My scenario i can able to bring the Multiple attachement in the Paylod using PaylodSwapBean .<b> I wan to store these attachements to a file system.</b>   ie. Whatever attachements i am reading i have to store in a file .             
               For eg., In my scenario i have designed the Data Type as DT_Test--> Row --- > Details .
                     Details can able to hold each line of Each File . One file contains multiple Line data .
                   <b>  If i use Message Transform Bean</b> , first attachement only getting Tranformed rest of them as it is . Not getting tranformed to required format.
                     Please give some suggestions !
    Regards .,
    V.Rangarajan

    Oops didn't observe abt the message transform bean usage... .....
    check with these
    3.2.3 Changing the Name and Type of the Payload................................. 6
    3.2.4 Sending a Mail with Attachment ...................................................... 7
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e6c7911-0d01-0010-1aa3-8e1bb1551f05
    SAP Note 793922
    http://help.sap.com/saphelp_nw04s/helpdata/en/2e/bf37423cf7ab04e10000000a1550b0/frameset.htm
    <b>Cheers,
    *RAJ*<b>

  • How to store preferences in file system on Windows?

    I have 2 questions related to preferences using.
    1. How to store preferences in file system (not in registry) on Windows? I see file system implementation of Preferences (java.util.prefs.FileSystemPreferences). But this implementation is linux-specific (use native methods). Does universal implementation exist?
    2. How to store custom files in preferences? I need to store some user-specific files (XML files, for example) somewhere. These files are naturally user preferences. So my idea is to store it using Preferences. But it seems like there is no such posibility in standard preferences. I believe many peoples have the same problem. Does anyone have solution?
    Please help me!
    Thank you in advance.

    Preferences is supposed to keep all this data
    handling away from you, so you shouldn't bother. If
    you'd like to write a file, just write a file. You
    could create a "Settings" object and serialize it.I understand your reasonings. But unfortunately I have requirements to use file system preferences both on Linux and Windows. My bosses think there are many problems because of registry. Don't ask what problems, they didn't say. I cannot change their requirements. I must to implement it.
    Maybe somebody already solved this proplem. I will very grateful for help.
    Once again: simply write and read a custom file. Why
    do you use Preferences at all costs when they don't
    do what you want to?I have requirements to implement saving of files in the same manner as saving of preferences. It may be different code from Preferences. But it will be the best to have the same code if it possible.
    Any way I believe the need to save user-specific files as preferences is quite widespread.

Maybe you are looking for

  • T530, only projector mode, notebook's display still on

    Hello, I have my T530 attached to docking station with an external display attached to it via display port. Everything is working properly, I can switch between notebook display and external monitor. Only thing that bothers me is when I turn on my no

  • Can't find MobileMe account

    When I input my mobileme account name to try and set up MobileMe on the AppleTV, for some reason it says that it cannot find the account. I have done it the "correct way" (without me.com on the end), as well as with the me.com to make sure. I know th

  • Studying for PL/SQL Certification, which ver of DB to install

    Just a quick question, I am about to embark on studying for Oracle PL/SQL Developer certification and wonder what version of the database people recommend installing on a home machine. Would people recommend Express Edition, Standard Edition, Standar

  • After Effects Error: RAM preview needs 2 or more frames to playback

    I keep getting this error message on a Windows 7 64bit system with 12GB of RAM. I have tried rebooting and re-installing the application and After Effects still gives me this error message when I press '0' to perform a RAM preview Any suggestions wou

  • Need Help Installing Elements on Mac

    I purchased Adope Photoshop Elements, downloaded the files but they won't install? Can someone please explain the steps to me, I'm new to Mac. Thanks so much