How to store multiple values in a coloum for a particaular row?

By mistake i posted this in abap general forum but i think this question should belong to Data Dictionary section
I want to design a table where we can store a table where we can save multiple values of column for a particular row. how to achieve this ? thanks in advance.
Example
id      name val1    val2
001 abc        1          a
                       2          b
                       3          d
                       4          e

you can use deep structures to achieve this.
or may be a simpilar approach based on the example that you have mentioned will be to create a table with all the primary keys that you want with an additional key field which will behave as a counter. some standard table do you this technique eg: PLMK where zaehl is a counter field which part of the kley fields.
cheers, Prabhakaran

Similar Messages

How to store Multiple values with restriction in Oracle 9i

Hi,
I am using oracle 9i R2 and i would like to know that how can i store multiple values and restrict some of values into oracle table?
ex.
I need to create table or inserting into existing table like below:
ID will be Primary/Unique key and each ID has multiple dept but each ID to have only 1 “X” dept, only 1 “Y” dept and only 1 “Z” dept… but, can have multiple “W” dept
What will be the best option to create/store data like this?
Like Table level Constraint (Unique or Check), Triggers or pl/sql?
ID     DEPT
1     X
1     Y
1     Z
1     W
2     X
2     Y
2     Z
2     W
2     W
2     W

Hi,
Other solution:
Function:
CREATE OR REPLACE FUNCTION my_unique_function(p_dep IN VARCHAR2) RETURN VARCHAR2
   DETERMINISTIC AS
BEGIN
   IF (p_dep = 'X' OR p_dep = 'Y' OR p_dep = 'Z') THEN
      RETURN p_dep;
   ELSE
      RETURN NULL;
   END IF;
END;
/Test:
Connected to Oracle Database 10g Express Edition Release 10.2.0.1.0
Connected as hr
SQL> create table emp(id number, dept varchar2(30));
Table created
SQL>
Function created
SQL> CREATE unique index ix_emp on emp(my_unique_function(dept));
Index created
SQL> insert into emp(id,dept) values (1, 'X');
1 row inserted
SQL> insert into emp(id,dept) values (2, 'X');
insert into emp(id,dept) values (2, 'X')
ORA-00001: unique constraint (HR.IX_EMP) violated
SQL> insert into emp(id,dept) values (3, 'Y');
1 row inserted
SQL> insert into emp(id,dept) values (4, 'Y');
insert into emp(id,dept) values (4, 'Y')
ORA-00001: unique constraint (HR.IX_EMP) violated
SQL> insert into emp(id,dept) values (5, 'Z');
1 row inserted
SQL> insert into emp(id,dept) values (6, 'Z');
insert into emp(id,dept) values (6, 'Z')
ORA-00001: unique constraint (HR.IX_EMP) violated
SQL> insert into emp(id,dept) values (7, 'W');
1 row inserted
SQL> insert into emp(id,dept) values (8, 'W');
1 row inserted
SQL> Regards,

How to store multiple values associated to one key

hello all
In my program I need to store "multiple values associated to one key".
for example : key would be ="T"
Values are = 2,4,5,1,2Plz tell me which data structure I can use for this purpose.
I have tried Hashtable for it, unfortunately it does not support duplicate keys in one Hashtable.
Thanx.
Rakesh

The easiest thing to do, is store another data structure as your value for a
particular key. So "T" being your your key, you would associate the value
to be an int[] (if you know the number of sub values) or create a new Vector
for each key, then you don't have to worry about the number of values at
compile time. All the while still using the Hashtable for constant time
look up. So like this:
public void storeMultValues(int[] arr)
Vector v = new Vector();
v.add(new Integer(1));
v.add(new Integer(2));
v.add(new Integer(3));
this.hashtable.put("T", v);
}See if you can work with that.
-Cludge

Store multiple values into a variable

I was wondering if it was possible to store multiple values into one varaible. Something along the lines of...
Oracle: 10g
--Table xSample (this is obviously a dumbed down version of the table for the sake of showing what I want to accomplish
S_ID   YEAR
1         2009
2         2009
3         2009
4         2009
--Query
select     s_id
into       pID
from      xSample
where    year = 2009;Basically the reason I was trying to figure out how to store multiple values into a variable is b/c I was going to use that variable (pID) as a parameter and have it's values passed dynamically when the proc was called. The values would go into a query that would look something like:
select *
from cust_data
where person_id in (pID)
aka
select *
from cust_data
where person_id in (1,2,3,4)Not sure if this is possible, but if anyone knows of a way I could accomplish this that would be great.
Edited by: user652714 on Dec 23, 2009 9:37 AM

Here's a basic idea building a comma seperated list, then consuming it in another query (taking the in list approach from Tom's post, linked earlier).
create table xsample (s_id number not null, year number);
insert into xsample select level, 2009 from dual connect by level <=4;
commit;
declare
   --4000 should be lots ... hopefully?
   v_parameter_list varchar2(4000);
begin
--create the comma seperated list
select
    substr(max(sys_connect_by_path(s_id, ',') ), 2, 4000)
into
    v_parameter_list
from
    select s_id, row_number() over(order by 1) as rn
    from xsample
    where year = 2009
start with rn = 1
connect by prior rn = rn - 1;
--consume the comma seperated list
for x in
    with data as
      select
        trim( substr (txt,
        instr (txt, ',', 1, level ) + 1,
        instr (txt, ',', 1, level+1)
        - instr (txt, ',', 1, level) -1 ) ) as token
      from
        select ','||v_parameter_list||',' txt
        from dual
      connect by level <= length(v_parameter_list)-length(replace(v_parameter_list,',',''))+1
    select *
    from xsample
    where s_id in (select * from data)
loop
    dbms_output.put_line('next item = ' || x.s_id);
end loop;
end;
/

How to store multiple files from SAp in to Application server?

Hi Guys,
             Can anybody tell me how to store multiple files from SAP into Application server.in my application i have to get the data from SAP tables BSEG , BKPF , BSAK and BSIK that to daily i have to do.
            Any Logic or Code for how to do is welcomed.
                    plz help me urgently.
Thanks,
Gopi

Hi,
directories creates basis. If you have task to store data in application server you already should have information into which folder you have to do it. If you don't have this information because it is just for example training for next task then you can use your personal folder into which you have access. To get list of all available folders please look at attached code and form get_directories (you get the list of folders you see in transaction AL11). But don't forget: If you are using open dataset you have to have rights to access application folder!
Here you are code which I use to upload text files from local disc into application folder
Regards,
Karol
*& Report FILE_PC_TO_SAP
REPORT FILE_PC_TO_SAP.
DATA: BEGIN OF searchpoints OCCURS 100,
        DIRNAME(200)     TYPE c, " name of directory.
        sp_name(100)     TYPE c," name of entry. (may end with *)
      END OF searchpoints.
DATA: BEGIN OF isearchpoints OCCURS 10,
        dirname(75) TYPE c,            " name of directory.
        aliass(75) TYPE c,            " alias for directory.
        svrname(75) TYPE c,            " svr where directory is availabl
        sp_name(75) TYPE c,            " name of entry. (may end with *)
        sp_cs(10)   TYPE c,            " ContainsString pattern for name
      END OF isearchpoints.
data: l_file type filetable.
data: l_rc   type i.
data: itab   type TABLE OF string.
data: g_tmp_file_path type rlgrap-filename.
data: wa_itab type string.
data: h_destin(100) type c.
data: dat      type string.
INITIALIZATION.
perform get_directories.
START-OF-SELECTION.
parameters: in_file type string OBLIGATORY LOWER CASE.
parameters: destin(100) type c OBLIGATORY LOWER CASE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
   FILENAME                      = in_file
   "FILETYPE                      = 'BIN'
   FILETYPE                      = 'ASC'
   HAS_FIELD_SEPARATOR           = ' '
   HEADER_LENGTH                 = 0
   READ_BY_LINE                  = 'X'
   DAT_MODE                      = ' '
TABLES
    DATA_TAB                     = itab
EXCEPTIONS
   FILE_OPEN_ERROR               = 1
   FILE_READ_ERROR               = 2
   NO_BATCH                      = 3
   GUI_REFUSE_FILETRANSFER       = 4
   INVALID_TYPE                  = 5
   NO_AUTHORITY                  = 6
   UNKNOWN_ERROR                 = 7
   BAD_DATA_FORMAT               = 8
   HEADER_NOT_ALLOWED            = 9
   SEPARATOR_NOT_ALLOWED         = 10
   HEADER_TOO_LONG               = 11
   UNKNOWN_DP_ERROR              = 12
   ACCESS_DENIED                 = 13
   DP_OUT_OF_MEMORY              = 14
   DISK_FULL                     = 15
   DP_TIMEOUT                    = 16
   OTHERS                        = 17.
IF sy-SUBRC <> 0.
write: / 'Error during loading input file!'.
ENDIF.
if h_destin is INITIAL.
h_destin = in_file.
endif.
CONCATENATE destin h_destin into dat SEPARATED BY '/'.
*TRANSLATE dat TO UPPER CASE.
OPEN DATASET dat FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-SUBRC = 0.
loop at itab into wa_itab.
     TRANSFER: wa_itab TO dat.
endloop.
CLOSE DATASET dat.
write: / 'File uploaded!'.
ELSE.
write: / 'Not possible to open dataset'.
ENDIF.
at selection-screen on value-request for in_file.
perform select_input_file_name.
loop at l_file into g_tmp_file_path.
    move g_tmp_file_path to in_file.
    h_destin = ''.
    SPLIT g_tmp_file_path at '\' into table itab.
    loop at itab into g_tmp_file_path.
      h_destin = g_tmp_file_path.
    endloop.
endloop.
at selection-screen on value-request for destin.
DATA: lt_dfies    TYPE TABLE OF dfies.
DATA: lwa_dfies   TYPE dfies.
CALL FUNCTION 'DDIF_FIELDINFO_GET'
    EXPORTING
      tabname    = '/BI0/PCO_AREA'
      lfieldname = 'CO_AREA'
    IMPORTING
      dfies_wa   = lwa_dfies.
lwa_dfies-tabname = 'searchpoints'.
lwa_dfies-REPTEXT   = 'Destination directory'.
lwa_dfies-LENG      = 100.
lwa_dfies-INTLEN    = 100.
lwa_dfies-OUTPUTLEN = 100.
lwa_dfies-fieldname = 'SP_NAME'.
APPEND lwa_dfies TO lt_dfies.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      RETFIELD = 'SP_NAME'
      DYNPPROG = SY-REPID
      DYNPNR = SY-DYNNR
      DYNPROFIELD = 'destin'
      VALUE_ORG = 'S'
    TABLES
      VALUE_TAB = searchpoints
      FIELD_TAB = lt_dfies
    EXCEPTIONS
      PARAMETER_ERROR = 1
      NO_VALUES_FOUND = 2
      OTHERS = 3.
*&      Form select_input_file_name
*       text
form select_input_file_name.
* call function 'F4_FILENAME'
*       exporting
*            program_name = sy-repid
*            dynpro_number = sy-dynnr
*            field_name    = 'PATH'
*       importing
*            file_name     = g_tmp_file_path.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
EXPORTING
WINDOW_TITLE = 'Please choose a file'
"default_extension = '*.TXT'
"default_filename = 'C:\*.txt'
initial_directory = 'C:\'
file_filter = '*.*'
CHANGING
FILE_TABLE = l_file
RC = l_RC
EXCEPTIONS
FILE_OPEN_DIALOG_FAILED = 1
CNTL_ERROR = 2
ERROR_NO_GUI = 3
NOT_SUPPORTED_BY_GUI = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.                    "select_input_file_name
*&      Form WRITE_DB_HOME
*       Write DB home directory
*       no parameters
FORM write_db_home.
CASE sy-dbsys(3).
    WHEN 'ORA'.
      CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ORAHOME'
                         ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
*      PERFORM flip_flop(rsora000) USING cflag.
*      WRITE: / 'DIR_ORAHOME',       30 searchpoints-dirname.
      MOVE: 'DIR_ORAHOME'        TO searchpoints-sp_name.
      APPEND searchpoints.
*--- C5056155 End   of ALV -------------------------------*
    WHEN 'ADA'.
      CALL 'C_GETENV' ID 'NAME' FIELD 'DBROOT'
                      ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
*      PERFORM flip_flop(rsora000) USING cflag.
*      WRITE: / 'DIR_ADA_DBROOT',    30 searchpoints-dirname.
      MOVE: 'DIR_ADA_DBROOT'     TO searchpoints-sp_name.
      APPEND searchpoints.
*--- C5056155 End   of ALV -------------------------------*
    WHEN 'INF'.
      CALL 'C_GETENV' ID 'NAME' FIELD 'INFORMIXDIR'
                      ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
*      PERFORM flip_flop(rsora000) USING cflag.
*      WRITE: / 'DIR_INF_INFORMIXDIR', 30 searchpoints-dirname.
      MOVE: 'DIR_INF_INFORMIXDIR' TO searchpoints-sp_name.
      APPEND searchpoints..
*--- C5056155 End   of ALV -------------------------------*
    WHEN 'DB6'.
      CALL 'C_GETENV' ID 'NAME' FIELD 'INSTHOME'
                      ID 'VALUE' FIELD searchpoints-dirname.
      IF sy-subrc = 0.
*--- C5056155 Start of ALV -------------------------------*
*        PERFORM flip_flop(rsora000) USING cflag.
*        WRITE: / 'DIR_DB2_HOME',    30 searchpoints-dirname.
        MOVE: 'DIR_DB2_HOME'       TO searchpoints-sp_name.
        APPEND searchpoints.
*--- C5056155 End   of ALV -------------------------------*
      ELSE.
        EXIT.
      ENDIF.
    WHEN OTHERS.
      EXIT.
ENDCASE.
ENDFORM.                    " WRITE_DB_HOME
FORM get_directories.
* get the name and aliases of ALL userdefined directories
SELECT * FROM user_dir INTO isearchpoints
    WHERE svrname = sy-uname.
    MOVE isearchpoints-dirname to searchpoints-dirname.
    MOVE isearchpoints-aliass to searchpoints-sp_name.
    APPEND searchpoints.
ENDSELECT.
SELECT * FROM user_dir INTO isearchpoints
    WHERE svrname = 'all'.
    MOVE isearchpoints-dirname to searchpoints-dirname.
    MOVE isearchpoints-aliass to searchpoints-sp_name.
    APPEND searchpoints.
ENDSELECT.
* Get DB home
IF sy-dbsys(3) = 'ADA'.
    PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ATRA'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ATRA'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_BINARY'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_BINARY'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory $DIR_CCMS
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CCMS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CCMS'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_LOGGING'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_LOGGING'     TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_RUN'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_RUN'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DATA'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DATA'           TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'DB6'.
    PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DBMS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DBMS'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXECUTABLE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXECUTABLE'     TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXE_ROOT'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXE_ROOT'       TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN'            TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN_ROOT'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN_ROOT'       TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GLOBAL'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GLOBAL'         TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_EXE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_EXE'      TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_LIB'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_LIB'      TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_HOME'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_HOME'           TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'INF'.
    PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTALL'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTALL'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTANCE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTANCE'       TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LIBRARY'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LIBRARY'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LOGGING'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LOGGING'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the files written by the memory inspector
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_MEMORY_INSPECTOR'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_MEMORY_INSPECTOR' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'ORA'.
    PERFORM write_db_home.
ENDIF.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PAGING'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PAGING'         TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PUT'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PUT'            TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PERF'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PERF'           TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROFILE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROFILE'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROTOKOLLS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROTOKOLLS'     TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_REORG'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_REORG'          TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ROLL'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ROLL'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_RSYN'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_RSYN'           TO searchpoints-sp_name.
APPEND searchpoints.
* calculate directory for saphostagent (no sapparam available...)
IF ( sy-opsys(3) = 'WIN' ) OR ( sy-opsys(3) = 'Win' ).
    DATA: windir_path(64), programfiles_path(64).
*   hoping that ProgramFiles is set in service user environment
    CALL 'C_GETENV' ID 'NAME' FIELD 'ProgramFiles'
                    ID 'VALUE' FIELD programfiles_path.
    IF programfiles_path IS INITIAL.
*     %ProgramFiles% not available. guess from windir
      CALL 'C_GETENV' ID 'NAME' FIELD 'windir'
                      ID 'VALUE' FIELD windir_path.
*     e.g. S:\WINDOWS ==> S:\Program Files
      CONCATENATE windir_path(3) 'Program Files' INTO programfiles_path.
    ENDIF.
    CONCATENATE programfiles_path '\SAP\hostctrl'
                                             INTO searchpoints-dirname.
ELSE.
*   on UNIX, the path is hard coded
    searchpoints-dirname = '/usr/sap/hostctrl'.
ENDIF.
MOVE: 'DIR_SAPHOSTAGENT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SAPUSERS'
                     ID 'VALUE' FIELD searchpoints-dirname.
IF searchpoints-dirname = '.'.
    IF sy-opsys = 'Windows NT'.
      searchpoints-dirname = '.\'.
    ELSE.
      searchpoints-dirname = './'.
    ENDIF.
ENDIF.
MOVE: 'DIR_SAPUSERS'       TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SETUPS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SETUPS'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SORTTMP'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SORTTMP'        TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SOURCE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SOURCE'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TEMP'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TEMP'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRANS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRANS'          TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRFILES'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRFILES'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRSUB'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRSUB'          TO searchpoints-sp_name.
APPEND searchpoints.
* get the name of the current server.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'rdisp/myname'
                     ID 'VALUE' FIELD searchpoints-dirname.
data: h_ind type i.
LOOP AT searchpoints.
    h_ind = sy-tabix.
    IF searchpoints-sp_name IS INITIAL.
      DELETE searchpoints INDEX h_ind.
    ENDIF.
ENDLOOP.
ENDFORM.

How to pass multiple values from workbook to planning function ?

Hi,
I have created Planning function in Modeler and it has one parameter(Variable represents = Multiple single values).
When executing the planning function by create planning seq. in the web template : I see value of variable store data like ...
A.) input one value -> V1
B.) input three values -> V1;V2;V3
This function execute completely in web.
However, I want to use the planning function in workbook(Excel).
The value of variable can't input V1;V2;V3... I don't know how to pass multiple values from workbook to parameter(Multiple single values type) in planning function ?
thank you.

Hi,
Please see the attached how to document (page no 16).
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0881371-78a1-2910-f0b8-af3e184929be">how to</a>
Hope this was helpful
thanks

How to get multiple values using HttpSession.getAttribute(java.lang.String)

Hey Guys
I'm trying to find a way to get multiple values using the following method
HttpSession.getAttribute(java.lang.String)
Here's the scenerio. Its a already written application and now i'm trying to make some changes. earlier in the jsp page a combo box was used and value was retrieved in the servlet using the getAttribute method of Session. Now I'm using a html multiple selection list and have to retrieve all the values selected in the list in the servlet. Can anyone please suggest me how to do that. HTTPRequest class has a method getParameterValues which will let me do that but i have to do is using HTTPSession.
Thanks for your time to read this

I'm not sure what you are trying to do. You can only use session.getAttribute to retrieve something that has already been stored in the session with a previous setAttribute. If you need to store multiple values under one attribute name using setAttribute, you can store an array, or an ArrayList or whatever type of Collection you want. The request.getParameterValues method is the only way you can retrieve form parameters than can have multiple values. If the servlet hasn't already processed these parameters and put them into the session for you, you have to use request.getParameterValues.

Creating multiple profiles, using unified profile types, to store multiple values for same properties

Hi All:
I am trying to create multiple profiles, using unified profile types, to
store multiple values for same properties. Here my intention of using
'unified profile types' is to create multiple profiles (to store multiple
values for a property). All the properties are stored in the same database
maintained by Personalization server. Also, I am trying to use the same
'USER' ejb as profile class/home/pk/jndi.
The scenerio is,
define unified profile types (Business, Vacation) using Personalization
admin tools, using com.beasys.commerce.axiom.contact.User,
com.beasys.commerce.axiom.contact.UserHome,
com.beasys.commerce.axiom.contact.UserPk,
com.beasys.commerce.axiom.contact.User for Profile Class, Home, Pk class,
JNDI name respectively.
Define Property set 'HotelCommerce' with property
HotelProp as single, restricted, text (valid values Single, Double)
Now you can use the attached jsp files to login as a user and try to set the
property value for HotelProp for each profile. As per my understanding, I
was expecting that I can set different values for the property 'HotelProp'
for each profiles. But unexpectedly, all the profiles get the same value.
Question. is it the correct behavior? if yes, how can I achieve this
functionality?
if not, do you see any problem in my scripts?
your answer asap is appreciated. we need to make decision on using
Personalization server v/s developing our own Personalization server!!!:)
thanks,
-rajesh
PS: I have tried 'Unified Profile Example' type too, but that did not work.
[propsettest.jsp]
[home.jsp]

I am trying to create multiple profiles, using unified profile types, to
store multiple values for same properties. Here my intention of using
'unified profile types' is to create multiple profiles (to store multiple
values for a property). All the properties are stored in the same database
maintained by Personalization server. Also, I am trying to use the same
'USER' ejb as profile class/home/pk/jndi.Hello Rajesh,
This is not the purpose of the UUP. The UUP is used to allow existing
database schemas to be aggregated with the existing Weblogic Personalization
Server database schema to provide a single, customized user profile with which
to maintain the user properties (
http://e-docs.bea.com/wlcs/p13n/users.htm#1068901 )
If you want to have properties that change value based on some "profile" or
classification of a user, then you should use classifier rules to change the
user from "OnVacation" to "AtWork" or "AtHome". You can use these classifier
rules to select content for the user or conditionally execute logic (
http://e-docs.bea.com/wlcs/p13n/rules.htm )
Ture Hoefner
BEA Systems, Inc.
1655 Walnut Street; suite 200
Boulder, CO 80302
www.beasys.com

How to use multiple values in an IF condition in RTF

Hi,
I have a scenario as mentioned below.
IF column value in ('A','B')
display C;
end if
IF column value not in ('A','B')
display D;
end if
My query is how to provide multiple values in an IF condition.?
Thanks,
Anand

But suppose "x.jar" needs a library from "y.jar". How do you put another JAR on the classpath of an applet in a Web page?
<applet code="z.class" archive="a.jar,b.jar,c.jar">

How to select multiple values from a listbox

Hi,
I have a list box on my UI which is not allowing me to select multiple values
I want to use multi select list box .. When i go to source of UI component and change that to select many listbox my page is not rendering it is giving error
When i drag & drop the component i am unable to drop it as a multi select list box that option is not coming.
I am working on Jdev 11.1.1.3 and I am using ADF/BC components
How to select multiple values from a listbox ?
Thanks,

Hi,
I want to use multi select list box .. When i go to source of UI component and change that to select many listbox my page is not rendering it is giving errorank
And what is the error ?
Frank

How to select multiple values from the parameters in BI Publisher report

How to select multiple values from the parameter drop down in BI Publisher, and how to handle this mulitple values from the report sql...

Hi kishore,
I have used all the steps as you mentioned in your previous reply....including checking Mulitple Selection Check Box..
Iam able to get the results when I am selecting one value..
and also I am able to handle multiple values the in the query by using IN :Parameter, but seems when we select more than one value from the parameter drop down i think the Bi Publisher is sending the values in concatenated form something ilke
ex: "'ACCOUNT','HR','SALES'" ,and when trying to display the parameters values in the output, its throwing the error as 'missing right paranthesis' ....on the whole do you have any solution which would handle
1.Single selection.
2.Multiple selection.
3.'ALL' Values.
4.Separating the concatenated string into individual strings and dispaly them on the output of the report..etc..in case of Mulitple selection.
Ex:
Concatenated String from BI Publisher:"'ACCOUNT','HR','SALES'"
Expected Output on the report:ACCOUNT,HR,SALES
reply to this would be much appreciated....
thanks,
manoj

How to select multiple values from the Parameters in the concurrent program

How to select multiple values from the Parameters defined in the concurrent program...and i believe multiple selection is not a direct feature of EBS, but is there any workaround solution to acheive mulitple selection?

I think there's no way to do that using standard feature.
Some workaround I use :
1. If the number of selections are fixed, you could use multiple parameters for the same valueset. For example :
Selection1 : <choose first selection>
Selection2: <choose 2nd selection>
..etc.
If you don't use it then leave it empty.
2. Use text varchar valueset and enter it manually and separate by comma (or other value) , eg : selection1,selection2,selection3....etc.

How to implement multiple Value Helps within the same Application ??

Dear Experts,
I want to implement multiple value helps in the same view.For that I have declared exporting parameters of type 'wdy_key_value_table.' within the component controller for each of the value helps.While I do activate and test the application I get the following error :
The following error text was processed in the system HE6 : A row with the same key already exists.
The error occurred on the application server hsdnt24s11_HE6_00 and in the work process 4 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: VALUESET_BSART of program /1BCWDY/9VSHJWRNR0EZPKFT3ZKC==CP
Method: IF_PO_VIEW1~VALUESET_BSART of program /1BCWDY/9VSHJWRNR0EZPKFT3ZKC==CP
Method: WDDOINIT of program /1BCWDY/9VSHJWRNR0EZPKFT3ZKC==CP
Method: IF_WDR_VIEW_DELEGATE~WD_DO_INIT of program /1BCWDY/9VSHJWRNR0EZPKFT3ZKC==CP
Method: DO_INIT of program CL_WDR_DELEGATING_VIEW========CP
Method: INIT_CONTROLLER of program CL_WDR_CONTROLLER=============CP
Method: INIT_CONTROLLER of program CL_WDR_VIEW===================CP
Method: INIT of program CL_WDR_CONTROLLER=============CP
Method: GET_VIEW of program CL_WDR_VIEW_MANAGER===========CP
Method: BIND_ROOT of program CL_WDR_VIEW_MANAGER===========CP
I dont know how to implement multiple value helps.Need your help on this.
Regards,
Mamai.

Hi
Hint is : A row with the same key already exists it means , It is assigning the same value/Key to row and you are calling it at WDDOINIT so it giving error at the time of initialization .
Better way to do the coding at some event in view OR if not possible than just execute the first value help in wddoinit later clear all the value before gettig the other Value help. Code it at WdDoModify View to get its run time behaviour.
BR
Satish Kumar

How to assigne multiple value in key of read table

Hi gurus,
I want read table xxxx with key field1 = ' xxx' or field1 = 'yyy'.
how to assign multiple value as key for the same field while reading internal table.
Regards
sagar

Hi ,
You can loop the internal table like
loop at <table xxxx> where field1 = ' xxx' or field1 = 'yyy'
or you can write two read statements to read the internal table in wrk area.
read table <table xxxx> with key field1 = ' xxx'.
if sy-subrc <>0
read table <table xxxx> with key field1 = 'yyy'.
if sy-subrc = 0
endif.
else.
do your data processing.
endif.
Thans.

Selecting multiple values in a prompt for a BI Publisher report

Hi,
I selected multiple values in a prompt for a BI Publisher report and ran the report. The report run fine with single value. But it run to error with mutiliple value. The Oracle Business Intelligence Publisher version is release 11g (11.1.1).
Thanks in advance
Susan

Thanks for your replies !
Is there any other way to achieve this ?
There is 1 InfoObject which has 2 fields Employee and Department.
Employee     Department
001                A
001                B
001                C
In the report there should be 1 row for Employee 001 with all the Departments displayed in the same cell separated by commas.
Can this be done in the backend through a ABAP code?

How to store multiple values in a coloum for a particaular row?

Similar Messages

Maybe you are looking for