How to switch to full screen faster and change between applications in full screen faster

Hi, my problem is that when I switch any application to full screen it does a little animation which spends a little time before getting to the full screen mode. The other problem is that when I change between applications in full screen mode it also does a little animation!
How can I eliminate those annoying ways of losing time?
I hope and thank very much your answers!

sure man, after all the help i got, why not give some in return...
to make it full screen on oppening i put this code on the 1st frame:
fscommand("fullscreen", "true")
i also make 2 buttons for making the screen smaller and bigger again, for both i used the following
on (release) {
fscommand("fullscreen", "false")
this is for making it smaller, and for full screen i used "true" instead of  "false"
of course i added a button foe exit with the follownig code:
on (release) {
fscommand("quit")
hope i helped...

Similar Messages

  • I have lots of spinning wheels on start up and changing between applications

    I get lots of spinning wheels on start up and when changing applications. Can anyone offer any suggestions?

    First, back up all data immediately, as your boot drive might be failing.
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Reset the System Management Controller.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Check your keychains in Keychain Access for excessively duplicated items.
    Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
    If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
    Otherwise, take the steps below when you notice the problem.
    Step 1
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
    Step 2
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • When I scroll up or down on my screen, black and grey lines run across my screen and next to the scroll bar. How do it fix it?

    When I scroll up or down on my screen, black and grey lines run across my screen and next to the scroll bar. How do it fix it?

    it is possible that zoom maybe enabled i think double taping with three fingers should disable it.
    or you can go into settings>general> assessability> zoom and turn it off.
    hope this helps

  • How to write code for page up and page down buttons on alv screen?

    Hi,
    Page up and page down buttons are not working in general alv report. Thease buttons are in disable mode. But is stnd. transactions (tcode : fbl5n)  these are enabled and working properly, but we can't debug this with /h
    How to write code for page up and page down buttons on alv screen?

    Poonam,
    On doing the screen debugging it took me over to    Include LSTXWFCC ,kindly check the below code.
    module cc_display.
      fcode = sy-ucomm(4).
      case sy-ucomm(4).
        when 'P--'.
          perform cc_firstpage.
        when 'P-'.
          perform cc_prevpage.
        when 'P+'.
          perform cc_nextpage.
        when 'P++'.
          perform cc_lastpage.
        when 'EX--'.
          perform cc_firstcopy.
        when 'EX-'.
          perform cc_prevcopy.
        when 'EX+'.
          perform cc_nextcopy.
        when 'EX++'.
          perform cc_lastcopy.
    I guess it can give you some lead.
    K.Kiran.

  • HT4623 How to switch Philippines store to update and purchase some of my application

    How to switch Philippines store to update and purchase some of my application

    Change App Store
    1. Tap "Settings"
    2. Tap "iTunes & App Stores"
    3. Tap on your Apple ID
    4.Tap "View Apple ID"
    5. Enter your user name and password.
    6. Tap "Country/Region."
    7. Tap "Change Country/Region"
    8. Select the country/region where you are located; re-select country/region even if it is correct
    9. Tap "Done".
    Note: If the change doesn't take effect, sign out of account and sign in again.

  • How to stop on the last image and that image remains on the screen?

    hello,
    how to stop on the last image and that image remains on the screen?
    thanks
    Yves

    Two ways are;
    split the clip with the razor tool at the point you want the image to freeze, r-click and select a Frame Hold option,
    or
    position the play-head at the end of the clip you want freezing and export a still frame. Re-import it and put it in your sequence.

  • 15" i7 Macbook Pro from early 2011.takes the mac laptop two or three tries to boot successfully. It would turn on, show gray screen, shut down, turn on again, show gray screen, shutdown, and then turn on, show gray screen, before it can finally get

    Hello All,
    I have a 15" i7 Macbook Pro from early 2011. The past few weeks, it has been getting increasingly difficult to get on my computer. It takes the mac laptop two or three tries to boot successfully. It would turn on, show gray screen, shut down, turn on again, show gray screen, shutdown, and then turn on, show gray screen, before it can finally get to the dark gray log-in screen. Even when I finally get logged in to start working, thinking it would be okay now, it shuts down randomly.
    I've ruled out the possibility of a software problem because I've just done a clean re-install of Mac OS X Mavericks on my computer just yesterday.
    I did upgrade the RAM recently, about a month and a half ago, from 4GB to 16GB, I went to the apple store four days after that upgrade to have them do a hardware test, and clean the inside of my laptop, which helped with previous heat issues. When they did the hardware test, the hardware was all registered as fine from their system.
    I've tried resetting the SMC, PRAM, and doing the internet recovery hardware test, but to no avail. I thought I could at least find out what parts needed to be replaced from the hardware test but it seems that when the hardware test is almost finished, the computer just shuts down, So I am unable to see the results.
    My computer is also having battery issues, under battery condition, it says "replace now," parts have been ordered, waiting for arrival. But if the battery health is low, it should still boot up fine, it would just hold a significantly less charge.
    Could this be a hard drive issue?
    Has anyone had similar symptoms and how was it resolved?
    Does anyone know what I can do to alleviate this issue?
    I haven't had time to take it to Apple because I'm currently taking a 21 credit semester academically. I'm an art and design student so my computer is basically the bane of my existence. Help! Any constructive advice is welcomed!
    Thank you so much for your input!
    -Christina C.

    Problem description:
    The Hard Disk is failing.
    EtreCheck version: 2.0.11 (98)
    Report generated November 4, 2014 at 7:59:28 AM EST
    Hardware Information: ℹ️
      MacBook Pro (15-inch, Early 2011) (Verified)
      MacBook Pro - model: MacBookPro8,2
      1 2.2 GHz Intel Core i7 CPU: 4-core
      16 GB RAM Upgradeable
      BANK 0/DIMM0
      8 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      8 GB DDR3 1600 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 512 MB
      Color LCD 1440 x 900
      AMD Radeon HD 6750M - VRAM: 1024 MB
    System Software: ℹ️
      OS X 10.9.5 (13F34) - Uptime: 0:3:43
    Disk Information: ℹ️
      TOSHIBA MK7559GSXF disk0 : (750.16 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      HDV4 (disk0s2) /  [Startup]: 749.30 GB (712.10 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      MATSHITADVD-R   UJ-898 
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Library/Application Support/Avast/components/fileshield/unsigned
      [loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) Support
      /Library/Application Support/Avast/components/proxy/unsigned
      [loaded] com.avast.PacketForwarder (1.4 - SDK 10.9) Support
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.avast.userinit.plist Support
    Launch Daemons: ℹ️
      [invalid?] com.adobe.SwitchBoard.plist Support
      [loaded] com.avast.init.plist Support
      [loaded] com.avast.uninstall.plist Support
      [loaded] com.avast.update.plist Support
      [invalid?] com.perion.searchprotectd.plist Support
    User Launch Agents: ℹ️
      [invalid?] com.avast.home.userinit.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [invalid?] com.jdibackup.ZipCloud.autostart.plist Support
    User Login Items: ℹ️
      None
    Internet Plug-ins: ℹ️
      AdobePDFViewer: Version: 10.1.1 Support
      QuickTime Plugin: Version: 7.7.3
      JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
      Default Browser: Version: 537 - SDK 10.9
    User Internet Plug-ins: ℹ️
      TroviNPAPIPlugin: Version: 1.0 - SDK 10.9 Support
      Google Earth Web Plug-in: Version: Unknown
    Safari Extensions: ℹ️
      Avast Online Security
      Trovi Search for Safari
    3rd Party Preference Panes: ℹ️
      None
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          16% mds
          7% WindowServer
          1% loginwindow
          1% fontd
          1% com.avast.daemon
    Top Processes by Memory: ℹ️
      120 MB com.avast.daemon
      86 MB Google Chrome
      52 MB Finder
      52 MB WindowServer
      41 MB Google Chrome Helper
    Virtual Memory Information: ℹ️
      13.45 GB Free RAM
      1.34 GB Active RAM
      944 MB Inactive RAM
      1.43 GB Wired RAM
      1.11 GB Page-ins
      0 B Page-outs

  • How can i add a new user and change user'password with javamail?

    how can i add a new user and change user'password from a mailserver with javamail?
    email:[email protected]

    Well user creation and updation is a system property..U need to go through that part...as it depends on the system you are hosting pout your application...
    if it is linux...u have to use some shell programming\
    bye for now let me know if this guides you or if you need some more stuff.
    bye

  • What is the diff in term of fastness and performance between retina and last mbp version in percentage ?

    What is the diff in term of fastness and performance between retina and last mbp version in PERCENTAGE ?
    Ty to not give links i want an answer here and now by someone who knows what hes talking about.

    But old mbp is not available with ssd you have to buy the option right ?
    Anyway, outside reboot speed is there a speed difference between retina and old version in term of general processing  ?
    I have a 2009 MBP that originally came with a SATA drive. Recently, I swapped drives; now, it has 512GB SSD. In other words, you can easily increase the speed of a standard MBP. There is going to be an increase in general processing with the Retina MBPs, but the significance depends on the application. For example, booting Photoshop used to take just over 30 seconds with a SATA drive; with an SSD, it's just under 10 seconds. But controlling for the SATA vs SSD, the differences are smaller and incremental.
    Ok you speak about a diff with the retina in term of better graphics when zooming but will this advantage be relevant also on my external  giant monitors ?
    I can't answer that, so I'll leave that to someone with more expertise in this area.

  • How to turn off sharing e-mail and messages between devices

    how to turn off sharing e-mail and messages between devices

    It's well hidden. Took me a few minutes to find it, even though I remember turning it off.

  • HT201401 Why does my 3GS have a white screen sometimes, and I have to lock the screen for it to go back to lock screen?

    Why does my 3GS have a white screen sometimes, and I have to lock the screen for it to go back to lock screen? Sometimes I have to attempt the lock screen several times, and it still doesn't work. I, then, attempt to restart it by powering it down, and the lock screen will appear again. The display goes out sometimes while I am on a call, and I can't hang up. I have to go through this hole process over and over again.

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first...

  • We are upgrading from 8.3 to 9.2. How can i get the table(record) structure changes between these 2 version

    We are upgrading from 8.3 to 9.2. How can i get the table(record) structure changes between these 2 versions. I am not able to find it in Oracle support.

    My guess is you want to upgrade HR8.3 to 9.2 - and that is not one jump upgrade. You will need to go HRMS 83 to 90
    (PeopleSoft Enterprise HRMS 8.3x to 9.0 Upgrade (Doc ID 747333.1) and then 90 to 92 (PeopleSoft Human Capital Management 9.0 to 9.2 Upgrade Home Page (Doc ID 1536087.1)
    Each these MOS pages contains the Demo to Demo Compare Reports that show the data structures changes between the releases.
    Hope it helps.

  • No connect between my iphone and itunes .. version is up to date and windows 7 and change between ports .....?

    no connect between my iphone and itunes .. version is up to date and windows 7 and change between ports .....?

    sorry but i need support from apple .................................

  • How do I capture software simulations when having to switch back and forth between applications?

    Working with service reps who use multiple systems to complete an order. Need to know how to guide them in the use of Captivate 8 to produce a software simulation that includes the entire process.

    Hi there
    It sounds as if you might be thinking that Captivate typically records a single application. Certainly it *CAN* work that way, but it also can record just an area of the screen. This is what I'm thinking you are wanting in this case. Just define an area of the screen (possibly even the entire screen) and record that. Then your reps can move between applications.
    Cheers... Rick

  • Was installing adobe and my screen saver and scrolling tool bar at bottom of screen vanished and now is a solid blue screen. how do i fix that?

    need to know how to get my screen saver and scrolling tool bar back

    Try:
    Command-W
    Close the front window. To close all windows of the app, press Command-Option-W.

Maybe you are looking for