How to tag spam mails in iron port and foreword to junk folder?

As Dave has suggested.
Positively identified spam recommended actions would be to Drop it -- if you would like to review these emails and manually remove it, then send it to the spam quarantine
This can be changed under the GUI > Mail Policies > Click on Incoming or Outgoing mail Policies and edit the anti-spam settings per policy if needed.
Ideally suspected spam to be sent to the quarantine for further review.
If you do not wish to use a quarantine or drop the email, you can prepend the email as Dave also suggested and send it to the end recipient under [Suspected Spam] <Subject> for the end user to determine it.
However the IronPort will not make specific rules to deliver it to the MUA's Junk mail folder.
This type of setup is normally down to each specific end user to work with on their own MUA (outlook, lotus, safari etc.)
I hope this helps.
Regards,
Matthew Huynh

Similar Messages

How do I get mail on my iPhone and computer to sync automatically, so e.g. messages read on one appear read on both? I am working in VN and the microsoft access server is in the USA.

How do I get mail on my iPhone and computer to sync automatically, so e.g. messages read on one appear read on both? I am working in VN and the microsoft access server is in the USA.

If you created as an Exchange account on the iPhone (not IMAP or POP) and you have Push on it should all work smoothly; Reading a message on either client should mark the other read (it does on mine). Try deleting the account from the phone, rebooting the phone (to clear out old settings), then go to Settings/Mail,Contacts,Calendar, add an account and tap Microsoft Exchange and add the account back.
There is a fundamental difference between BB and iPhone that you should be aware of; on the BB you do not sync directly with Exchange; you sync with the RIM server which then syncs with your Exchange server. The iPhone syncs directly with Exchange using Microsoft's ActiveSync protocol. So in some ways they will behave differently. But ActiveSync should manage marking messages as read correctly.

I have 2 iphones and a macbook on one mobile me account. How can I keep mail in the macbook and one iphone private from the other iphone?

I have an iPhone 3G, an iPhone 3GS, and a MacBook on one macmail and mobile me account. How can I keep mail on the MacBook and iPhone 3 private from the iPhone 3GS?

Pretty much. I don't understand why you need to worry about MobileMe, though. I'd guess the vast majority of us with iDevices don't have MobileMe accounts at all. That's pretty much why it failed.

How to use different mail address in "from" and "user" property?

I'd like to use the user enter mail address as the "from" property and use my mail account to send it, but I got error: com.sun.mail.smtp.SMTPSendFailedException: 553 You are not authorized to send mail, authentication is required when set different mail address in "from" and "user" property, how to resolve this problem?

Basically that's a bad idea. Suppose you used your server to send messages that claimed to come from "[email protected]"? Naturally enough people have tried that, either as a joke or as an attempt at fraud, so that servers will check to see if the message is coming from the server it claims to be coming from. And if it isn't -- as in that example -- it will consider it a forgery. Best case (for you) is that the server will flag it as spam or junk. Worst case is that your server will be blacklisted and other servers will ignore it.

TS4009 How do I clean up mail in my icloud? I have already deleted old mail on all devices, and emptied the junk & deleted files, but it still shows that I am at max on my icloud. What do I do to free up space? (photos & apps do not take up that much roo

How do I clean up mail in my icloud? I have already deleted old mail (from all my e-mail accounts) on all devices, and emptied the junk & deleted files, but it still shows that I am at max on my icloud. What do I do to free up space? (photos & apps do not take up that much room). When I go to manage storage on any device & it will display how much room each program or app is using, it still shows that my e-mail is taking up the most room. Is there a way to actually log on to the icloud server to manage what it stored there? If so, how do I do it? Also, on a related subject, why does my mail not sync accross all devices? ie. when I delete an email on one device, why do I still see it on all my other devices? How can I change this?
I have an iphone5, ipad2, ipod 4th gen, ipod 3rd gen, all running on my same apple id - but I have a PC not a Mac home computer - is this part of the problem? Looking to upgrade to a Mac sometime this year...
Thank-you for the help!

beckyfromoz wrote:
I do have the Time Capsule and spoke to Apple Care here in Sydney about it yesterday. They told me my mail is not backed up there unless I create a special folder. I just tried ringing them again but Apple Care is closed today...
Mail is backed up automatically. If you make backups automatically, open Mail application and then, open the Time Machine app (in /Applications/Utilities). You will access to the Time Machine interface, and you will be able to see all your mails of all the backups you have, and you will be able to restore them. It means that your mails are backed up onto the Time Capsule

How do I set Mail to display Name AND email address in the message

I thought I used to have this setting and now I cannot find it (if there is one)
Can't I set mail to show Name and email address in the address box both when creating a message and viewing one?
thanks,
tom

Thanks, Ernie
I wasted about 20 minutes looking for it and couldn't find it
cheers,
tom

How to check spam mails on iphone/ipad

one of my contacts has sent mail 3 times but I am neither receiving it on my iphone or ipad. when I access my email account on a laptop, the mail is appearing in the SPAM folder of my Gmail account. pl help

Hmmmmm... i completely understand that. Let me ask you one thing more, how HTML charts are integrated in apex. Because in apex latest versions only one type of html chart is installed that is bar chart. But if i want to see data in different HTML Charts then whats the theme?
Thanks for your help

How to delete all mail in IPAD 1 and keep mail untouched in Gmail server.

How can I delete IPAD1 mail while keeping original mail at the server ? The problem is that when removing mail from my GMail account on my IPad1 the original is also removed from the Server. I want to free thousands of mails listed on my IPad Google account saturating and congesting my tablet but without deleting the original emails at the server. Sorry to repeat. But I want my problem be clearly stated.However I would like to receive a copy of the mail I get in the server, so that I can trash everyday's copies without touching my Gmail account at the server. Maybe I have been redundant, please excuse me. Cheers !!! DavidSpartacco

It has been some time since I used POP3 on my iPad, it is just not a very good way to manage email between multiple devices. There is no check mark to simply change the Gmail account from IMAP to POP on the iPad. You will have to delete the account from the iPad removing all the email already stored on it. Once you have changed the server settings at Gmail you have to re-create the account on the iPad. Now that it is POP3 you should have a setting in the iPads settings to not delete the emails from the server when deleting them from the iPad. Once the new account is created on the iPad all the email on the server will download again and have to be deleted from the iPad. You will have to reset other devices as well, although Gmail may be able to handle both settings at the same time but they may conflict.
For your use, you may simply want to just use Gmail through Safari where you will be viewing your email directly from the server through the web browser. No messages are stored on your iPad, they are all managed on the server through your web browser. There is also a Gmail app available which may also leave all the messages on the server although I have not experience with the app.
When I had an email account set to POP3 I had the iPhone and iPad set to not delete messages from the server when I deleted them from the device. I had my home computer set to remove them from the server when they were deleted from there. It does work although each device is independent, reading a message on 1 device would not mark it as read on the other device. I ended up having to administer the email on 3 different devices even though they were the same account.

How to pull e-mail, password recovery phrase and password recovery answer f

Hi all,
I am very new to HR ABAP and have some basic doubts in ABAP HR.
I need to pull login which is like an e-mail id, password recovery phrase and Password Recovery Answer.
Can some one guide me from where or from which table or which info type should i pick these values and how.
Regards,
Jessica Sam.

Manage your Apple ID primary, rescue, alternate, and notification email addresses - Apple Support explains the difference between Alternate and Rescue Addresses and the "necessity" for a Rescue Address.
I fall into the category of not needing one (only two security questions in the challenge), so my "Forgot your answers?" link to send the email sends to my ALTERNATE address.
I do not know the criteria for 2 or 3 security questions.
ÇÇÇ

How to avoid trash mails on both ipad and Mac

Just wondering if it's possible to avoid to trash my ".me" mails on my Mac when I do it on my iPad?
Thanks!

No, you have one account (regardless of how many devices connected to it) so when you delete a piece of mail from the account it is gone.

What's up with Mac Mail settings not porting and being so laborious?

i am wondering why at such a late date (Mountain Lion and iOS6) i am entering NINE (9!) entries for my email accounts on my iPhone and having to enter my email address for the new account THREE (3!) times - and then having to do this again for EIGHT (8) entries on both my laptop and my desktop.
i have had to do this again due to porting my website to a new host and - well - at a minimum it would be nice to get iOS 6 to only require me to enter my address ONE time (this means that for my ten email accounts on the iPhone i would cut down my entries from 90 to 70 which would be great).
then if there is some way to /port/ my email setting from my laptop to my desktop (assuming i am running the same OS on both) this would mean i would only have to enter an additional 80 entries instead of the 160 i have to do now.
am i missing some EXPORT utility in Mac Mail in Mountain Lion or - well - or is this software somehow not interested in making my life easier in 2013?
THANKS

I tried the technique in that linked article with another account on my Mac. It works, but I think you'd be better off setting up the accounts. Here's what I needed to do (note changes with Mountain Lion).
Open you user/Library folder and copy the Mail folder to an external.
Open the containers folder and copy com.apple.mail folder to external (ML change)
On the destination Mac, select Get Info on each of the folders.
Unlock the padlock in the sharing and permissions section.
Click the Add button and add yourself. Set you to read/write.
Select you, then use the Gear menu to make you the owner.
Select any of the other users (except everyone) and delete them.
Copy the folders into you User/Library folder in the same locations they came from.
If you don't transfer the keychain, then you'll have to set the passwords for all the accounts, along with the SMTP server password, if set.
Your original plan I think was easier.

HOW DO I SEND MAIL TO MULTIPLE PEOPLE AND THOSE PEOPLE SEE ONLY THEIR NAME?

How do I send one email to multiple addresses, but the recipients see only their name in the "To" box?

I did this and the recipient gets an email From: Me and To: Me.
If you are sending email to multiple recipients by bcc, the recipients should not be able to see the other recipients you are sending the mail to. However, they will see who the email is from which is you!
What is confusing me is how are your recipients getting your email if it's not addressed to them but to yourself?
Have you tried rebuilding Mail?
Which version of OS & Mail are you using? Asking because your system profile is showing you are using Snow Leopard yet, you posted in the ML forum.

How do I get mail on my iPhone and Mac to sync automatically, so e.g. messages read on one appear read on both?

Hello!
I use Gmail, and with either Google Sync or with a standard account set up, I'm not able to get my iPhone and MacBook Pro to sync mail automatically, so I end up having to read and delete emails twice.
There must be an easy way around that, that I'm stupidly unable to find, right?
Thanks!

If you created as an Exchange account on the iPhone (not IMAP or POP) and you have Push on it should all work smoothly; Reading a message on either client should mark the other read (it does on mine). Try deleting the account from the phone, rebooting the phone (to clear out old settings), then go to Settings/Mail,Contacts,Calendar, add an account and tap Microsoft Exchange and add the account back.
There is a fundamental difference between BB and iPhone that you should be aware of; on the BB you do not sync directly with Exchange; you sync with the RIM server which then syncs with your Exchange server. The iPhone syncs directly with Exchange using Microsoft's ActiveSync protocol. So in some ways they will behave differently. But ActiveSync should manage marking messages as read correctly.

How to retrieve data from the serial port and decode it each 2 bytes is a long variable and 1 frame is about 6 bytes

I send the frame by a microcontroller ( 8bits) the fram contains 6 bytes, 2bytes conform a long variable, I want to decode the frame and make operations with these long variables and then plot them

Hey jpvans,
I would first suggest using NI-VISA to talk to the serial port. Then, you can use the LabVIEW Type Cast or the Flatten to String and UnFlatten From String VIs to convert the data.
You can setup the read so that it reads just two characters at a time to form an individual long or you can set the read up to read it all and then use the string functions like String Subset to cut the information into chunks.
I hope this helps out.
JoshuaP

HT2500 how can I synch mail between an iMac and Macbook Air?

I have a Macbook Air running10.7.4 and an iMac running similar. I use Mail as local tool for my hotmail account but this means inevitably that mail is nt synched between the iMac and MBA. I want to be able to access my mail from both computers but only do so nce. I would love to be able to synch mail folders between the two so that I could keep my mail in order. Only having to read/delete once would be a further benefit

set it up as an IMAP account instead of POP. IMAP syn with server (which also means other devices using that mail sync too) where as POP doesn't modify what's on the server. most hotmail accounts setup by default as POP

How to tag spam mails in iron port and foreword to junk folder?

Similar Messages

Maybe you are looking for