How to Take Out Default Buttons on Calendar ?

Hi,
Does anybody know how to hide/remove the default "Previous" and "Next" buttons on a calendar ? Any advice is greatly appreciated !!
Dorothy

Yes, I just want to display the calendar for a particular month selected by the user. I am able to do so. However, the "Next" button still shows even though technically there is no next month to go for. Clicking the "Next" button will then display the calendar with a line saying "No rows returned" and with a "Previous" button. The "Next" button, "Previous" button, "No rows returned" message together is causing confusion to the users. Therefore we want to hide/take out the two default buttons there. Any insights ??
Thanks,
Dorothy

Similar Messages

My ipad will not come on. i tried to restore and get error message 1603, dont know how to take out itsw

my ipad will not come on. i tried to restore and get error message 1603, dont know how to take out itsw which it tells me to do.

Error 1603
Follow the steps listed below for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
The above is from the 2nd link below.
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

How to Set Automatic Default Time in Calendar

Friends,
When I create new event in calendar (by double clicking on a specific date) for example Group Dinner, the calendar autotatically set the start time at 8PM.
How to set the default time to 7PM for example.
Thanks
Regards,
akostaman

Ok It seems not just a problem of 24 hour time appointments that won't sync but all appointments I make on my iphone in calendar won't sync to calendar on my mac?

How to set a default button in a JFileChooser dialog?

How do I set the default button in a JFileChooser dialog?
Thanks in advance!
Thomas

public static JButton searchByText(Component comp, String[] texts) {
    if (comp instanceof JButton) {
        JButton btn = (JButton) comp;
        String text = btn.getText();
        for(int j=0; j<texts.length; ++j)
            if (text.equals(texts[j]))
                return btn;
        return null;
    if (comp instanceof Container) {
        Container cont = (Container) comp;
        for(int j=0, ub=cont.getComponentCount(); j<ub; ++j) {
            JButton result = searchByText(cont.getComponent(j), texts);
            if (result != null)
                return result;
    return null;
}You can call this method, passing it your JFileChooser and:
String[] approves = {"Open", "Save"};

How to set the default button of an ALERT

Can someone help me how to set the alert propety to change the default button from button1 to button2.Not from the prioperty palette, but inside the code using like set_alert_property.I am using the Oracle Forms 10g.
Thanks in advance.
Srini

To the best of my knowledge, the default button cannot be set at runtime. This must be set at design time in the Builder.
Refer to the Forms Builder online help for details:
http://www.oracle.com/webapps/online-help/forms/10g/topics/f1_help/builts/setatpro.html

How to take out a report from WEB

Hi,
I have to take out a report from web. It needs to be passed two parameters from WEB. Which is the URL that i have to put in the Explorer, to get the report (made with Reports 9i). If it it with VALUE0=PARAMETER1&VALUE1=PARAMETER2 why doesn't it work?
What i need is this part: http://.............&desformat=pdf&destype=cache&report=lgv_solicitud_viaje.rdf&valor0=200700000301

Sounds like you need to use the rwservlet. Look here for more details but an example URL for the rwservlet looks like:
http://myias.mycomp.com:7779/reports/rwservlet?server=myrepserv+report=test.rdf+userid=scott/tiger@mydb+desformat=pdf+destype=file+desname=test.pdf

HT201303 how to take out my credit card

i want to know i can take out my credit card number out of my account.
Thank you.

So if you have iTunes on your computer this is possible, otherwise your out of luck. go on the itunes store and onto your apple ID's account, then go onto the payment informaiton and there should be a none option for your payment option. Hope this helps.

How to Make the Default Button Marker Not Show Upon Launching...

I am trying to only have the markers show up on the menu item when you roll over it. However, when the menu is first launched, the marker is automatically showing up on the first button.
I have selected "None" as the default menu button in the menu config. I am also using Photoshop to make the menu and creating the (+) buttons there.
Any help would be greatly appreciated.
Thanks.
Dave

Create an invisible button (turn off the visibility of all layers) and
set it to use Highlight Group 2 (edit the Menu Color Set). Set the
opacity of all the highlight states to 0%. Make the invisible button
the default button.
-Jeff

How to find out default screen variant name

Hi All,
For particular sales order creation I want to find out which screen variant has been used.
I have tried using SHD0, with entering Transaction code as VA01 but in that for Transaction variant field there are 5 different transaction variant names are mentioned.
Please guide me how to find out the transaction variant name used in va01 for particular sales order.
Thanks and regards,

Hi,
Goto VOV8 T.Code.
Select your order type.Details.
Check what is the transaction variant assigned to your order type.
It is used while creating the order.
This field is present in transaction flow tab.
Regards,
Krishna.

How to find out which button is pressed in a form?

I want to know which button (Insert, Update, Delete) the user has pressed in a form in Portal 9.0.2.3.
My form is launched so that the ID column is fixed (and hidden). Unfortunately when user presses Insert, the value of the ID is lost. I have tried to work-around this by calling the form again after successful submission. And also I'm trying to improve actions so that the form window is closed if Update or Delete is pressed.
I have got some solutions from Metalink. My problem is that they not working all the time. E.g. solution below worked this morning, but not anymore (after I have changed the form)! Have I made errors or are solutions shown in Metalink only for Portal v3.xx?
My code in 'On successful submission of a from..' field:
DECLARE
l_action varchar2(20);
v_id number;
BEGIN
-- get the action performed
l_action := p_session.get_value_as_varchar2(
p_block_name => 'DEFAULT',
p_index => 1,
p_attribute_name => '_STATUS');
-- If the action is insert then call this form again
-- If the action is update or delete then close this window
if (l_action = 'Inserted one record.') then
v_id := p_session.get_value_as_number(
p_block_name => 'DEFAULT',
p_index => 1,
p_attribute_name => 'A_ID');
go(PORTAL.wwv_user_utilities.get_url('PROVIDER.LINK_TO_FORM', 'id', v_id));
else
go('http://server/closewindow.htm');
end if;
END;
When debugging the code, variable l_action is always null.
Best regards
Rainer

Hi Satish,
Check this blog -
/people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
Check Clemens reply in this thread, its great-
BADI
<b>Reward Points if this helps,</b>
Satish

How to take out put of each documents

dear all,
i want to know the detail configuration and settings in sd for out put.
such as i need to take the print of sales order or invoices so what type of settings i have to do
how one can take a print out after creation of a sales order,quotation ,invoice and scheduling agreements with the necessary fields i need in it.
if possible how it can be emailed to the concern person.
with regards
subrat

Hi,
Output can be configured in following way.
1.In SPRO Create output type.
2.Create access sequenece.
3.Assign output program to the output type.
4.Add the output type in output determination procedure.
5.Assign the output procedure to document type i.e.Sales order,Delivery docuement,Billing docuement.
6.maintain the output condition record.
7.You can also enter the output manualy in all the documents.
For mails to be sent,maintain processing medium as Mail the output type configuration.Maintain mail Id in customer master.Maintain proper access sequence.
Reward points if useful
Regards,
Amrish Purohit
Message was edited by:
AMRISH PUROHIT

How to take out the Hard Drive...

My logic board died on my 12' iBook G4 and the information on there is critical to get back. I can't start my ibook up in target mode, but I would like to take the Hard Drive out and put it in a case. Can someone point me to a current link, step by step instructions please. Time is short, and I need a quick fix.
Thanks

Try this:
http://www.ifixit.com/Guide/83.0.0.html
Have fun!
Adrian

How can I customize default alerts in Calendar?

I would like Calendar to put a default email alert on every new event. I can do it individually with each event but I can't make it a default.
What I want is for Calendar to email me an alert the day after an event.
I have managed to be able to get Calendar into a two-week view using the terminal, and also adjust my default event legnth using Terminal. But I have been able to find nothing that will allow for me to customize the default alert settings. Any help would be great.
I use Calendar for work, so this may be an odd request but would improve my life drastically!

Hi,
For customising Required Message u can make use of "requiredMessageDetail" in af:inpuDate.
For Pattern validation message u can go as per Kavitha's advise or
Make use of "messageDetailConvertBoth", "messageDetailConvertDate" or "messageDetailConvertTime" as per ur "type" attribute u specified.
Regards,
Suganth.G

How to find out default value of parameter in stored function???

Hi,
is there any kind (metadat) how to get default value of parameter of stored function???
thx

that's where it's supposed to be, but it doesn't seem to work correctly. I checked on 9 & 10, and the DEFAULT_VALUE column is always null on both. in fact, the underlying column (sys.argument$.default$) is also always null.

How to Resize the default date picker calendar

Hello Experts,
SAP CRM web UI shows a date picker as follows for populating fields of type date.
We noticed a strange issue that for months like January 2015 , the width of the date picker is lesser than what is shown for November 2014.
As you can see in the following snapshot , the dropdown icon of the second field is hidden when the month shown is November 2014.
This an issue because of the different sizes shown for different months , users would have to move mouse pointer when they to move to next months by clicking on the next arrow icon.
Any tricks to fix the width of the date picker will be really appreciated.

Hi Praveen,
You can try following tricks -
1. Go to SE80, search for BSP Application = 'thtmlb_styles'
2. under Pages with Flow Logic - we have one CSS file called "thtmlb_core_stand.css"
3. In this file try changing width of method call ' #thtmlb-calendar-container ' to 150px like shown below.
#thtmlb-calendar-container {
     display:                none;
     position:               absolute;
     width:                  150px;
hope it helps.
Best Regards,
Sandeep Kumar B

How to Take Out Default Buttons on Calendar ?

Similar Messages

Maybe you are looking for