How to take the battery off the IPhone 4 device?
Where is the IPhone 4 battery located and how do I take it off?
The iPhone's battery is not designed to be user replaceable or accessible.
See ifixit.com.
Similar Messages
-
i have been getting this message " no sim installed " too many times then my phone goes off , its iphone 4S , its really a problem i cant get calls or anything and im not sure how to take the SIM out then insert it again , what to do ??
Use the sim tool that came with your phone or a safety pin and just insert it into the hole at the side of the sim tray and push it in and then pull it out. It is no more difficult than that and then just close it again.
-
How long would the iPhone 4s battery last when shipped from the factory and going to be opened on Christmas? Or how long does the iPhone battery last when it is off? Or would I activate the iphone 4s with a flat battery? Thankyou
Thankyou!
-
How do I transfer music off my iphone onto itunes on a new mac. I don't have the laptop I originally synced my iphone up with any more, so how can I do this without it?
I have tried to do this through home sharing but as I don't have the old laptop it wont let me.
Any HELP please?!?
Would be much appreciated.The iphone is not a backup/storage device. The sync is one way - computer to iphone. The only exception is itunes purchases. File>Devices>Transfer Purchases
It has always been very basic to always maintain a backup copy of your computer for this very occasion.
Have you failed to do this? -
How to take the cron job log in HP UX?
Hi,
How to take the cron job log in HP UX
I need to run a backup and other stuff everyday. How do I check and start cron service under HP-UX UNIX operating system? How do I write cron jobs?
A. Cron service is required to run jobs and tasks such as backup.
You must login as the root to run following commands. Each user that is using the cron service must have a cron configuration file in the /var/spool/cron/crontab directory. Also users are permitted if their name appeared in /var/adm/cron/cron.allow file
Task: Find out if cron is running under HP-UX
Type the following command at a shell prompt
# ps -ef | grep cron
Open /etc/rc.config.d/cron file
vi /etc/rc.config.d/cron
Set control variable to 1 to enable cron: CRON=1
Set control variable to 0 to disable: CRON=0
Close and save the file. To start or stop cron you can type the following command:
# /sbin/init.d/cron start <-- start cron
# /sbin/init.d/cron stop <-- stop cron
Task: HP-UX Start cron service
If cron is not running, simply type:
# cron
Task: Edit / create cron jobs
Type the following command to submit a cron job:
# crontab -e
List your cron file:
# crontab -l
Backup all your cron jobs:
# crontab -l > ~/backup.cron.jobs
Remove ALL cron job:
# crontab -r
Task: Crontab file format
Cron file format is as follows:
MIN HOUR DATE MONTH DAY /PATH/TO/COMMAND
0-59 0-23 1-31 1-12 0-6 /root/scripts/backup2tape.shEasy to remember crontab file format:
* * * * * command to be executed
| | | | |
| | | | ----- Day of week (0 - 7) (Sunday=0 or 7)
| | | ------- Month (1 - 12)
| | --------- Day of month (1 - 31)
| ----------- Hour (0 - 23)
------------- Minute (0 - 59)To run /root/script/backup at 23:00, every day, enter:
# crontab -e
Append following
0 23 * * * /root/script/backupRun foo job very weekday (MON-Fri) at 6am, enter:
0 6 * * 1-5 /root/script/backupFor more information refer to cron and crontab man pages.
Subscribe to our free e-mail newsletter or RSS feed to get all updates. You can Email this page to a friend.
Related Other Helpful FAQs:
What is Cron?
Linux Start and stop the cron or crond service
Run crontab Every 10 Minutes
Linux / UNIX Setup and run php script as a cron job
Stop Ubuntu / Debian Linux From Deleting /tmp Files on Boot
Discussion on This FAQDavid Says:
January 15th, 2008 at 12:21 am
You might note that all files normally found in /etc/init.d, /etc/rc*.d, and others are all in /sbin in HP-UX 10.20 and up.
Note too that your formatting is off in the description of the /etc/rc.config.d/cron file. Also, if you run /usr/bin/cron instead of /sbin/init.d/cron start, the /etc/rc.config.d/cron file is not used.
Regards,
SatyaI guess it would :)
btw, how did this piece miss from the contents pasted by the OP ?
The doc has given all details of CRON and missed where to see the logfiles. :)
****Added****
I tried man crontab in windows, i dont see it.i overlook most of the things, i would have done the same ;)
Edited by: Bobcatalog on Oct 23, 2008 9:40 AM -
How to repair the iPhone 5 which buy from New York but now I am in HK
How to repair the iphone 5 which I buy in New York
but I am now in Hong Kong
I cannot but a air-ticket to New yor for repair
can I repair in Hong Kong
Charles
<Personal Information Removed by Host>Probably not because the iPhone warranty is NOT international, but is country specific, so if you purchased it in the US, then it will have to go back to the US for repair.
You can try and take it into a store in Hong Kong and see if they will help you, but if it is a US phone, then they have every right to refuse due to warranty cover and they also have different models if your phone needs replacing and they won't be able to give you the same model if the phone came to from the US and this is why warranty cover for the iPhone is country specific and NOT international.
You can try, but you might be out of luck and if so, then there is nothing you can do except send the phone to any relatives that you have living in the US and see if they will take it to an Apple store in the US to get it repaired for you. Otherwise you'll have to get it repaired on your next trip to the US.
This is exactly why you should have thought very long and hard before purchasing a US iPhone and having exactly this situation where you can get nothing done about repairing the phone due to country specific warranty.
The only other thing that you can do of course, is to buy a new iPhone from Hong Kong and then you will have no problem with warranty cover. -
how do I delete photo ALBUMS from my iPHONE 4?
I sync via icloud and I can not see any folders selected in itunes.
I searched the internet and basically there is no one who has the answer (so far)
to how you delete the iphone photo library and misc albums
I have also had every iphone and I am not stupid.
charles altmanReplying to my own post - heh. I downloaded iExplorer (http://www.macroplant.com/iexplorer/) which allowed me access to the files on the phone and there was the phantom movie in the DCIM folder. Deleted it, and all is well - although I still have 0.65gb of Other in iTunes.....
-
How to take the Backup of all XI-Design Objects(Repository, Directroty,SLD)
Deal All,
Actually I am facing problems with XI Server.
we have decided to reinstall the server. So, please tell me how to take the back up for all the scenarios that has been created in that. And also tell me how to take the back up for all the things.
Then how the backups can be used in Newly initialed XI-Sys.
Please help me.
Thanks in advance.
DanabHi,
In your IR and ID , you can export the Objects as TPZ files which can be reimported later.
To expoert, select the SWCV in your IR or the Configuartion Scenario in ID and then Tools --> Export and then specify the directoy in your XI server to which export should be done and then export the same.
Now, they will be available as TPZ files. When you need to reimport, tools --> Import and you can import.
Regards,
Bhavesh -
How to take the data from sage system to sap r/3
hi expects,
how to take the data from sage system to sap r/3? which adapter is to be used?what is the format of data in sage system?how the scenarios will work ? please help me in solving this problem?hi rohit,
the data transfer can be done by using SOAP adapter
do chk this link
http://www.sage.org/lists/sage-members-archive/2001/msg01718.html
http://www.sage.org/lists/sage-members-archive/2001/msg01739.html
thanx
Sampath -
How to take the screen shot of my computer page by using Labview.... is there any funtions available in Labview?
Another thread about this theme.
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions -
How to get the iPhone 5c to pair with my mac book pro and my ue speaker
How to get the iphone 5c to pair with my mac book pro and my ue speaker
TerryReynar wrote:
How to get the iphone 5c to pair with my mac book pro
You don't. It only sync using iTunes.
It doesn't "pair".
and my ue speaker
What is "ue speaker"?
Ultimate Ears wirless bluetooth speaker?
Set speaker to Pairing mode.
On the iPhone, Settings > BlueTooth.
Select the speaker. -
HT4061 how to restore the iphone 4 when you get a restore message error (-1)?
how to restore the iphone 4 when you get a restore message error (-1)?
If the iPhone was jailbroken, you get this error due to baseband mismatch. No help for such iPhones here in this forum.
if not, Restore on another computer. If error persists it is hardware failure. -
Please help me how to take the "Spot Color" in illustrator?
Hi,
Please help me how to take the "spot color in illustrator CS" using vb script (or) java script.
Regards,
Prabudass E.Prabudass,<br /><br />If you are just wanting to see if the illustrator file uses spot colors - run the Delete Unused Panel items from the default actions. then view the swatch palette in small or large List View. The color names that have a square containing a gray circle (spot) to the right of their color names are spot colors. <br /><br />The following will get the spot color name of an existing swatch named "Color1" and change it to "Nicks Swatch" and will assign the CMYK values stated.<br /><br />if (app.documents.length > 0){<br />var swatches = app.activeDocument.spots;<br />for(i=0;i<swatches.length;i++){ var currSwatch = swatches[i]; if(currSwatch.name == "Color1")<br />{currSwatch.name = "Nicks Swatch";<br /> var newColor = new CMYKColor(); <br /> newColor.cyan = 35; newColor.magenta = 0; <br /> newColor.yellow = 50; <br /> newColor.black = 0; <br /> currSwatch.color = newColor; } }}<br /><br />When this script has run the swatch palette will not immediately reflect the changes to the swatch name until you double click on a swatch and click OK or Cancel in the Edit Swatch dialog.<br /><br />I hope that I have understood your question correctly and that these responses are helpful.<br /><br />Good Luck<br /><br />Nick
-
How to open the iPhone 5S Unlocked
How to open the iPhone 5S Unlocked
Contact the carrier to whom it is locked, inquire about their process to unlock, and if you qualify.
If it is already unlocked or was purchased as unlocked, simply insert a SIM from a supported carrier. -
TS1538 How to starting the '' Apple mobile device '' on my iphone to connect on itunes?
How to starting the '' Apple mobile device '' on my iphone to connect on itunes?
Refer here:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567 -
Hello,how much does the iphone 4 16gb unlocked cost if i want to buy it as a gift and to use it outside USA?
If you're talking about buying the phone in the US, forget it. There are NO unlocked iPhones sold in the US and no US iPhone can be officially unlocked. Thus, it doesn't really matter what it costs.
Maybe you are looking for
-
Why can't I get the Audi-video chat started?
My step-daughter and I have iSight cameras and Macintosh Computers with iChat installed. On Friday afternoon we tried to start a video-chat. I heard by phone, that we were both trying to get in touch with each other at the same time. • I was able to
-
CDHDR / Change numbers (add new TCODE tracking)
Hello SAP users, I want to track creations of equipements in CDHDR. => Obectclas = 'EQUI' and TCODE = 'IE01' OR 'IE08'. Currently, I'm able to track modification (tcode = 'IE02') but I can't manage to add handler on creation transaction. I'm sure it
-
I got a itunes card and it want let me bye anything
Igot a itunes card and I redeem it but it want let me bye anything
-
On a reports page there are two 2 date picker items ( a datefrom and a dateto) along with a text field with autocomplete item When the page loads the following query is called SELECT "COL1", "COL2", "COL3", from "TABLE" WHERE MYDATES BETWEEN :DATEFRO
-
Data transport at PAI for EXIT-COMMAND
Hi, I'm using module AT EXIT-COMMAND in my dynpro flow logic. As far as I know, data transport doesn't occur when function code of type 'E' is triggered,except for OK code. But I need all the dynpro fields to be transported even for 'E' type function