How to tell on iPad if I'm on N or G?

I have a time capsule and another airport extreme. Both are capable of N. I have it configured for dual mode to support my iPhone that can only use G. My question -- how can I tell from the iPad which network it is on? How can I tell if it is on the N or G network?
Thanks

On most routers you can give the two segments different SSIDs. This is what I do for example.

Similar Messages

  • How do tell if iPad has acquired GPS signal

    iPad-mini, Retina, WI-FI + cellular, IOS 7.0.6
    I want to use my iPad camera in wilderness areas to identify specific areas. I want the Pad to store the GPS coordinates in the EXIF of pictures I take. Question is - how do I tell whether iPad has acquired GPS satellites before I press the camera shutter. I don't want to take a picture and then discover the EXIF does not contain the GPS coordinates. Can I do this without using any 3rd party apps?
    TIA
    Eric

    This helped me in the sense that I feel I didn't overlook something obvious about GPS status. I feel cheated that Apple doesn't have a GPS status icon in the status bar. Also, I would think that all Apps that use GPS would at least indicate whether they have acquired GPS satellites or not. I imagine some of them do but as far as I can tell the Camera app does not (?). I don't feel that I should have to consult another app in order to determine when conditions are right to tap the Camera app's shutter. If that's the case then I guess I'll use Motionx.

  • Hi, can anybody tell me how I connect my iPad to  AppleTV using  "home  sharing" ? Thanks

    Hi, can anybody tell me how I connect my iPad to AppleTV using home sharing? I can,t find hoe sharing on my iPad. Thanks

    Apple TV
    http://support.apple.com/kb/HT4437
    http://support.apple.com/kb/HT5209
    http://support.apple.com/kb/HT4352

  • How to tell which version of ipad I have?

    I would like to know which version of the ipad I have and how to tell if its ipad2 or ipad3 ? I offten get this question but not sure how to properly answr it.

    Here's the various iPad model numbers and order numbers. The model numbers are on the back of the iPad
    Apple iPad Wi-Fi (Original) 16, 32, 64 GB
    The wi-fi only iPad configurations are assigned model number A1219.
    MB292LL/A is the order number for the 16 GB configuration. The 32 GB configuration is assigned MB293LL/A and the 64 GB configuration is assigned MB294LL/A.
    Apple iPad Wi-Fi/3G/GPS (Original) 16, 32, 64 GB
    The Wi-Fi/3G/A-GPS iPad configurations are assigned model number A1337.
    MC349LL/A is the order number for the 16 GB configuration. The 32 GB configuration is assigned MC496LL/A and the 64 GB configuration is assigned MC497LL/A.
    Apple iPad 2 (Wi-Fi Only) 16, 32, 64 GB
    The wi-fi only iPad 2 configurations are assigned model number A1395.
    MC769LL/A is the original order number for the 16 GB configuration in black. The 32 GB configuration in black is assigned MC770LL/A and the 64 GB configuration in black is assigned MC916LL/A. The original 16 GB, 32 GB and 64 GB configurations in white are assigned MC979LL/A, MC980LL/A, and MC981LL/A, respectively. On March 7, 2012, Apple discontinued the 32 GB and 64 GB configurations and assigned new order numbers of MC954LL/A and MC989LL/A for the black and white 16 GB configurations, respectively.
    Apple iPad 2 (Wi-Fi/GSM/GPS AT&T) 16, 32, 64 GB
    The Wi-Fi/GSM/GPS iPad 2 configurations are assigned model number A1396.
    MC773LL/A is the original order number for the 16 GB configuration in black. The 32 GB configuration in black is assigned MC774LL/A and the 64 GB configuration in black is assigned MC775LL/A. The original 16 GB, 32 GB and 64 GB configurations in white are assigned MC982LL/A, MC983LL/A, and MC984LL/A, respectively. On March 7, 2012, Apple discontinued the 32 GB and 64 GB configurations and assigned new order numbers of MC957LL/A and MC992LL/A for the black and white 16 GB configurations, respectively.
    Apple iPad 2 (Wi-Fi/CDMA/GPS Verizon) 16, 32, 64 GB
    The Wi-Fi/CDMA/GPS iPad 2 configurations are assigned model number A1397.
    MC755LL/A is the original order number for the 16 GB configuration in black. The 32 GB configuration in black is assigned MC763LL/A and the 64 GB configuration in black is assigned MC764LL/A. The original 16 GB, 32 GB and 64 GB configurations in white are assigned MC985LL/A, MC986LL/A, and MC987LL/A, respectively. On March 7, 2012, Apple discontinued the 32 GB and 64 GB configurations and assigned new order numbers of MC755LL/A and MC985LL/A for the black and white 16 GB configurations, respectively.
    Apple iPad 3rd Gen (Wi-Fi Only) 16, 32, 64 GB
    The Wi-Fi Only iPad 3 configurations are assigned model number A1416
    MC705LL/A refers to the 16 GB configuration in black. The 32 GB and 64 GB configurations in black are MC706LL/A and MC707LL/A, respectively. The 16 GB, 32 GB and 64 GB configurations in white are MD328LL/A, MD329LL/A, and MD330LL/A, respectively.
    Apple iPad 3rd Gen (Wi-Fi/4G LTE AT&T/GPS) 16, 32, 64 GB
    The Wi-Fi/4G LTE AT&T/GPS iPad 3 configurations are assigned model number A1430
    MD366LL/A refers to the 16 GB configuration in black. The 32 GB and 64 GB configurations in black are MD367LL/A and MD368LL/A, respectively. The 16 GB, 32 GB and 64 GB configurations in white are MD369LL/A, MD370LL/A and MD371LL/A, respectively
    Apple iPad 3rd Gen (Wi-Fi/4G LTE Verizon/GPS) 16, 32, 64 GB
    The Wi-Fi/4G LTE Verizon/GPS iPad 3 configurations are assigned model number A1403
    MC733LL/A refers to the 16 GB configuration in black. The 32 GB and 64 GB configurations in black are MC744LL/A and MC756LL/A, respectively. The 16 GB, 32 GB and 64 GB configurations in white are MD363LL/A, MD364LL/A, and MD365LL/A, respectively.
     Cheers, Tom

  • How do I tell my iPad to only synchronize with one computer?

    How do I tell my iPad to only synchronize with one computer? I can change settings before connecting to another computer, or I can slide the sync bar quickly when I connect to another computer. But I'd like to make a setting and not worry.

    HI Howard,
    Instructions for syncing more than one computer here.
    Carolyn

  • Can someone tell me how much a referb ipad is and do i just take my broken ipad into store and they will swop it over

    can someone tell me how much a referb ipad is and do i just take my broken one into store and they will swop it over

    In the US the prices for an out-of-warranty service are (from here) :
    iPad model
    Out-of-Warranty Service Fee
    New iPad
    $299
    iPad 2, iPad
    $249

  • How to connect my ipad mini to wireless printer

    Could someone tell me how to connect my ipad mini to my AirPrint printer

    If it says there is no sim card installed it either can't find one physcially, or the card moved and lost contact or has failed.  A new sim card can be obtained form your Mum's cell/mobile carrier if needed easily.
    However this is irrelevant to whether or not the iPad can join a Wifi network.  Its 2 different things.
    For now ignore the Sim card message and just try to connect to her Wifi network.  It is independent and should function regarldess of the sim card status.

  • I forgot my passcode for the ipad and i can't connect to iTunes because it keeps giving me error message that i have to unlcok the ipad first... any advice on how to restore the ipad or unlock it?

    i forgot my passcode for the ipad and i can't connect to iTunes because it keeps giving me error message that i have to unlcok the ipad first... any advice on how to restore the ipad or unlock it?

    You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
    This will tell you how to restore
    http://support.apple.com/kb/HT1414
    You will probably need to use recovery mode
    http://support.apple.com/kb/ht4097

  • HT1212 how to restore my ipad

    how to restore my ipad

    If your iPad is disabled or you've forgotten its passcode then the HT1212 page that you posted from tells you how to reset it.
    If you want to restore a backup onto your iPad then see this page : http://support.apple.com/kb/HT4079

  • How much faster will ipad 4 charge with new charger

    Has anyone seen a number that tells us how much faster the new ipad 4 will charge?
    Can anyone guess how much faster the ipad 3 would charge with the new charger brick?
    I can't even find estimates in articles on the web... Maybe we won't know till some of them ship?
    Thanks,
    Tom

    Thanks... That's pretty disappointing - 20% more power and only 5-7% improvement in speed.
    I'm sure hoping the ipad 4 does better than that.
    Cheers,
    Tom

  • How to connect my ipad with mac using bluetooth?

    how to connect my ipad with mac using bluetooth?

    You can't so quit trying. Take a look at this to see what is supported with regard to Bluetooth connections in iOS.
    iOS: Supported Bluetooth profiles

  • How to connect my iPad 2 to Sony Bavaria wirless? Any other way than apple tv?

    How to connect my iPad 2 to Sony Bavaria wirless? Any other way than apple tv?

    http://store.apple.com/us/product/MD098ZM/A/apple-digital-av-adapter
    this one? if i connect it to the tv, will it work  if audio system is connected to the tv?

  • How to connect my ipad using static ip

    How to connect my ipad using static ip?
    Using Netgear Router.

    Go to Setting > General > Network > WiFi > Then tap the blue icon next to your network, from here you can setup a static IP on your internal network.

  • How to connect my IPad to a security enabled wifi

    how to connect my IPad to a security enabled wifi

    iPad not connecting to a Secure Wi-Fi signal
    Turn OFF your wifi hub so the network is not broadcasting (or go out of range) so the
    iPad can no longer see the SSID
    Choose another network
    Type in the SSID (WiFi Network name)
    Select the security type
    Enter the password
    At this point, you will not be able to join the network (it is not turned on or you walked out of range, remember?)
    Turn ON your network hub and wait for the DSL or Internet to get connected, (30 secs to 1 minute in my case) or walk back in range
    Then click the Join button on the iPad
    Voila, as they say in Texas

  • How to connect my iPad, Brother printer, and AirPort Extreme?

    How to connect my iPad, Brother printer, and AirPort Extreme?

    I don't believe any of the Brother printers are AirPrint-enabled. Is your Brother printer network-ready? That is, does is support either/both a wired or wireless connection or just uses USB to connect?

Maybe you are looking for

  • Program for Leaving Action..

    Dear All, We have created a leaving action with set of Infotypes and certain actions and we have to carry out this action for about 5,000 employees. Now user needs to have a certain program to carry out the action as it's not feasible to carry out ma

  • How do I get an LOV / Select One Choice label / Display Attribute in bean?

    Guys and Gals, Using Studio Edition Version 11.1.1.3.0 I must have read and tried to implement 15/20 different threads looking for the answer to this question and didn't find anything suitable so I thought I'd post the code I finally cobbled together

  • Sql database 10.g  edition not opening

    Hi guys, I downloaded the oracle 10g version, but it is asking me to type user name and password. I use one I created with my particulars, but it is not allowing me to log in. Could you please help me. Thanks Sincerely Gouse

  • Adobe cs6 master automatically installs in german instead of Dutch or english

    Adobe cs6 master automatically installs in german instead of Dutch or english. How can I change that

  • COPA - KEFC Problem

    Hi all, I have written a program that produces a file for upload into COPA via KEFC. I have defined my sender structure and mappings (via KEFA and KEFB). If I do the upload in test mode I see on screen that all my values are mapped correctly but when