How to tell the difference between iphone6 and iPad mini chargers

I Don't know which charger is which. iPhone 6 and ipad mini original. They both have same info on back

Hey Applechele,
Thanks for the question. If I understand correctly, you have 2 chargers that look the same. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
Using iPad power adapters with your iPhone, iPad, and iPod - Apple Support
Your iPad comes a USB power adapter. You can also use this adapter with your iPhone and iPod.
Charge the battery in your iPad - Apple Support
Identify your USB power adapter
Thanks for using Apple Support Communities.
Have a great day,
Mario

Similar Messages

How to tell the difference between 10w and 12w?

We have:
2 iPhone 5s
1 iPad
1 iPad 2
1 iPad (4) with Retina
I know that the iPhones use the smaller 5w charger, but how do I tell the difference between the iPad/iPad 2's 10w charger and the iPad 4's 12w charger? They look exactly the same.
The iPad 4 takes forever to charge, so I want to make sure I am using the 12w - and I don't want to damage the older iPads by accidentally using the 12w.
Thanks!

Read the fine print on the charger. My iPad 2 10W charger says 5.1V 2.1A. A 12W charger should have a higher number for A.
You can use the iPad 4 charger on your other devices, without damage, to charge them faster.
~~~~~~~~~~~~~~
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

How to tell the difference between ibook and ibook g4 screens?

Hi, I've got a faulty screen on my ibook g4, and have spent the last month or so trying to find a second hand replacement one.
I recently bought a screen on ebay, but when I received it, it only said 'iBook' on the front, not 'iBook G4' as my current one does. I replied to the seller to complain that he sent me a g3 screen, but he insists it's G4.
Before I take it any further, can anyone confirm whether it is possible that this is actually a g4 screen, even though there is no mention of G4 on it?
Here is a picture(http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=120281147959&ssPageNam e=STRK:MEWN:IT&ih=002#ebayphotohosting)
Thanks, Nick

As far as I have encountered, the 12" screens are cross compatible between the G3 and G4 iBooks. The LCD screens - not the cable harnesses. You can take the LCD from the G3 screen and replace the one from the G4.
Now, with the 14" iBooks, the high end (1.33 and 1.42 GHz models) G4 iBooks use a screen that is not cross-compatible with earlier G4 or G3 models.
So, while you cannot swap the entire screen assembly between the g3 and G4, the LCD panels are largely swappable. The screen bezel and frame are also swappable.
Mad Dog

How to calculate the difference between intdate and getdate

Hi,
My requirement is to get the data for all the claims where the difference between transactiondate and getdate() should be less than or equal to 7 which means any claims that happened in the past week.
So, my query would be something like this
select * from claims
where transactiondate-getdate < 8
But my transactiondate is in int format such as 20150331 and getdate would be in the format of 2015-03-31. Can someone please help me on how can i achieve the difference between these 2 date formats in the where clause.
Please let me know if you have any questions or if i am unclear.
Thanks

Hi SqlDev12,
Please find the below condition in your query,hope it would help you
DATEDIFF(DD,CAST(CAST(TransactionDate
AS
VARCHAR)
AS
DATETIME),GETDATE())
< 8
Thanks & Regards,
Praveena.

How to tell the difference between iPhone 5c & iPhone 5C Android OS ?

I want to buy an I phone 5c. but don't kno how to tell which is the real iphone 5c. could N.E help!

thanks for reply. the thing is i live in an Caribbean country (3rd world) and every one say they are authorized iPhone reseller (cannot be trusted) .. the real authorized reseller here (price smart) has no iPhone 5c .
… just wanted to know . …. Like my iMac has "About This Mac" and it tells me what it is running (osx10.8.4) if the iPhone will have dis ? and how to find it on the iPhone 5c .( this may help me from purchasing a fake iPhone 5c) thank you.

How to synchronise the fonts between mac and ipad in the keynote app?

I use Keynote on both Mac and iPad machines. Unfortunately, the font set in iPad is quite different than in Macbook and because of that, every presentation must be re-writen while changing the device. This is a bit annoyent and I cannot find the solution.

Only use fonts on your Mac that you know are available on the iPad.
See: http://iosfonts.com/

How to tell the difference between DRM (fairplay) music and non-DRM music?

Apple finally is selling non-DRM music and I've bought a couple songs in the past with ease. I like the system but I'm having a problem finding out which music is still using DRM.
Apple originally differentiated it by charging 30 cents more for the unprotected music. Now however they removed the surcharge, but there's no way to tell if the music I'm looking at is protected.
I choose not to buy DRMed music as I'm using my music to burn MP3 CDs for my car, and having to crack protection isn't the way I want to do it.
How can I tell using iTunes Store which music is DRM protected, and which music is DRM free?

Agreed, I have stopped buying from iTunes until they eliminate the restrictions, and have started replacing the songs I DID buy from iTunes with non copy protected ones from Amazon. I tell everyone not to buy from iTunes for exactly that reason. There are lots of other excellent options, which do not have the stupid restrictions that Apple has. The iPod is great, iTunes with DRM is incredibly annoying.

How can I tell the difference between Academic and non-academic version

I would like to purchase Logic Express on Ebay. The Apple part number is
MA338Z/A
How can I tell if this is the Academic or non-academic version?
THanks

ok, but there is no way to tell from the Apple part #?
I thought that the /A might mean Academic but it seems this same part number applies to the non-academic version:
MA338Z/A
Thanks

In ical, how can you tell the difference between a meeting invite and email?

When you send a meeting invite in ical, does the recipient receive a different icon in their inbox to differentiate from an email?

For service stock you can't tell the difference between a new iPad and a refurbished one. Both will come in a plain brown box with the same pattern in model numbers. If you mean between a refurbished one and one new at retail, then other than the obvious difference in packaging, I've read that the model number on refurbished units starts with the letter "F", though I've not confirmed that.
Regards.

How to get the difference between two HashMaps

i have two HashMaps
HashMap first = new HashMap<Integer,Object>();
HashMap second = new HashMap<Integer,Object>();
How to get the difference between one and two and put the result in the third
HashMap third = new HashMap<Integer,Object>();

My bad, difference of course means removeAll():Map<Integer,Object> first = new HashMap<Integer,Object>();
Map<Integer,Object> second = new HashMap<Integer,Object>();
Map<Integer,Object> third = new HashMap<Integer, Object>(first);
third.keySet().removeAll(second.keySet());No loops needed.

How do you tell the difference between a genuine USB to Lightning cable? I spoke to two different operators at Apple Support. One said that it has Designed in California Made in China and the serial number on it, and the other operator said it didn't

How can you tell the difference between a genuine Apple lead and the cheap, or sometimes not so cheap imitations? I spoke with two people at Apple Support - one said that it has Designed in California Made in China and the serial number stamped on it, and the other said it didn't. Come on guys, how are we supposed to tell if you can't? I'd really like to know how to identify my lead amongst my daughter's gazillion fakes?

All my cables are genuine either with the devices or from Apple retail Store I have never found a serial number on any regardless of which length ,I have all three lengths
In fact they have nothing printed at all only a USB logo at relevant end

How does muse tell the difference between a temporary site and my free 5 sites with my creative cloud membership?

how does muse tell the difference between a temporary site and my free 5 sites i get with my creative cloud membership?
because they both use .businesscatalyst.com and there's no option to say that it is a temporary site not a finished site i wish to publish to my creative cloud account.

Since this is an open forum, not Adobe support... you need to contact Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

My ipad is barely charging - how can i tell the difference between iphone 6 charger and ipad

my ipad is barely charging - how can i tell the difference between iphone 6 charger and ipad

See the following page for info on all of Apple's chargers (you'll need to scroll down a bit on that page):
Charge the battery in your iPad - Apple Support

If unboxed how could you tell the difference between refurbished imac and new imac?

If unboxed how could you tell the difference between refurbished imac and new imac?

Besides all of that, you can purchase Apple Care which will extend your warranty to 3 years just like you can on a brand new iMac.
If you're considering a "refurbished" iMac, buy it ONLY from Apple. I believe it's your best bet.

Could any one tell me what is the difference between swfloader and module loader?

Hi All,
                      Could any one tell me what is the difference between SWFLoader and Module Loader in Flex3 in detail?

Hi,
ModuleLoader is a kind of strange API that is really just intended to look like SwfLoader for modules that contain a single visual component, and hides most of the module loading infrastructure, which is all about class factories.
What I mean by "only loaded once" is that if you have several places in the code that call the ModuleManager.getModule("url").load() call, it will only ever get loaded over the wire and interpreted once, subsequent "loads" will just re-dispatch pseudo-load events to the new client. In other words, the class factory is a singleton for a given url. Unloading is a totally different story. As you note, not everything is truly unloadable, because there may be lots of references to stuff in
the module that will keep it alive and un-GC'ed.
I suggest playing with the low-level API so that you understand the backing implementation, and this should help you understand the limits of ModuleLoader.
The main difference between modules and applications is that modules have lower overhead, and they only ever get loaded once, no matter how many times you load them. If you're using the ModuleLoader API, keep in mind that you're losing about half the functionality of the module system. I will assume that you are, because otherwise it would be obvious where to expose methods. You might want to play around with the lower level ModuleManager API just to get a hang of what's going on - ModuleLoader is a pretty thin veneer over the lower API.
                Basically, what you want to do is to have your module implement an interface, say IModuleWhatever.
Also try and refer to this link which was previously discussed in this forum..
http://forums.adobe.com/message/74404
Thanks,
Bhasker

How to tell the difference between iphone6 and iPad mini chargers

Similar Messages

Maybe you are looking for