How to trace the database table for a structure
hi
am trying to find the database table for a structure unfortunately am failing to use the sql tracer any one know howelse i can do that the structure name is 'busbankcheck' and 'bus000flds'.
thanx in advance
Hi florence,
1) U can go to tcode sldb and give ur structure name or if u can find which logical database it is from u can get the tables of the structure....
Suppose it is of HR it may be like pnp logical database and then to sldb and give pnp and u can get all the table of that....
2)If u know which fields u want from the stucture....then go to table DD03L and give ur fields name and it iwll bring where all tables this field is avaialble and u can find them......
3) the st05 sql trace can help u.....
I hope any one of the three will definetely help uuu
Regards
vamsi
Edited by: vamsi talluri on Jan 22, 2009 1:24 PM
Similar Messages
-
How to find the database table for this screen field
hi in XD02
There is a scrren field customer
name1 (firt line under name)
and email id fields
i wnat to know where the data stores goes w hen user eners in this screen i mean in which table and how to find it
for kunnr name1 i suppose it goes to kna1 but how to find it?
and f or email id whre it gots which table
regards
AroraHi,
when you press F1 it will give the necessary information
but some times it may give the structure names also
those structures are being used by the back end module pool
programm
so every time we can get the exact information about the
data type or length
but not sure that every time we get the exact database table name
and field name
according to me, if i dont know where some field are getting stored in
database ( if the field name and table is structure )
then i will ask my functional consultant ...
thanks & regards,
Venkatesh -
How to know the database tables for 0CUST_SALES_LKDH_HIER
Is there any way to find out the underlying data base tables for "0CUST_SALES_LKDH_HIER"?
In general where should I should go to check the underlying data base tables.Table - KNVH - Customer Hierarchies
Easy ways first check for the datasources at http://help.sap.com/saphelp_nw2004s/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
If that really doesn't help you have to have a look at this Excellent blog by Roberto Negro : /people/sap.user72/blog/2005/09/05/sap-bw-and-business-content-datasources-in-pursuit-of-the-origins -
How to find the database table behind the xtags varibles?
if in xtags we find that some varibles are not having the right data coming from xml -> database tables so how can we find out the names of database table behind it .
<!-- <xtags:variable id="msds" context="<%=specs%>" select="//header/msds"/>
<a href="/MSDS/<%=msds%> target="#">MSDS</a>
-->
now how to find the database table and the column name of database table from which the value of id msds is coming
Here they have stored the name of pdf file . from this code pdf file is displayedHi,
Thanks for your response. It is PM related. When I run a T Code - IK18, the field Total Counter Reading field appears. I am looking for that particular fields actual table name and field name. I think I have found it in IMGR table. Now I want to get IMRG-READG in my report, but there is no common fields in neither MKPF or MSEG table. So what can I do to connect IMRG table with either of them ? -
How to Read the internal table for the data download from the spool
HI all,
I have one issue regarding the spool ,we are getting the correct output as per requirement of user but when we send the same to the user in pdf format they did notget the same.
they are telling that the due date is missing from the pdf.
Please advice me how to track the internal table for the spool data converted intopdf in a readable format.
the FM used for the above task is :
call function 'CONVERT_OTFSPOOLJOB_2_PDF'
Please reply if any one worked on the same.
Thanks in advance.
Gaurav,Hi Wang,
Please let me know how you solved your question.
Points will be rewarded.
Thanks,
Arun. -
How to transport the DATABASE TABLE into the Test system ?
Hi Experts,
I am working on BI7, I had created Database table in BDV system using SE11. Tech_name is ZGLACC_TEMP. I had activated it. I had used this database table for the purpose of writing the start routine in the transformation. while I am transporting the transformations to the test system, It is showing as syntax error in ABAP program,
In BDV system there are no syntax errors. it is working fine,
So now I have to transport the database table to test system so that I can transport the transformations into Test system without any error.
Kindly anyone can give the answer , it will be appreciate and points will be assigned.
thanks
sekharHi Sekhar,
Go to SE11, go into the change mode of your table and change the Object Directory entry (Goto -> Object Directory Entry) to some valid package (other than $tmp). Then it will ask for a transport request. Give a transport request and then I believe you know what to do with that transport.
Another thing to keep in mind ... transport all the data elements and domains you have created for this table. Change their Object Directory Entry and assign them to the same transport request.
Best regards,
Kazmi -
How to find the Check table for a field ?
Hello All,
I have the filed name f1.
Now I want to know the check table of this field programatically and if this field has a configuration table then I need that table also.
eg: if werks is the field the Master Table is : MARC
and Configuration Table is : T001W.
Is this possible first of all programatically ?
If yes can anyone help me out ?
Regards,
Deepu.KHi again,
1. I don't know the master table for the field werks
A field is never independent. It is always linked to a table,
otherwise the information is only half.
2. So incase if we do not know the tablename,
its best to query the table DD03L with WERKS,
and filer out CHECKTABLE with *,
and take any one record.
regards,
amit m. -
How to get the Database table behind condition records
Hello All
In transaction VK13, after giving condition type, I can select sales document.
For a given Sales Document number, there are several conditions.
How can i extract all the conditions for a given sales document?
I am coding a report for this. In which database table can i get the condition between sales document number & different conditions attached to it?
On the screen, i can see that the fields are from the structure KOMG. What is the corresponding table?
Thanks
Chandra SekharHi,
corersponding tables will be konp , a771,a511,a564
here i am providing you sample query related to it
{ -Get the Territory list price YPR0
SELECT vkorgau
zzland1_ag
zzmatgrade
a511~kfrst
datbi
datab
kbetr
INTO TABLE it_list1
FROM a511
JOIN konp
ON a511knumh = konpknumh
WHERE a511~kappl = 'V'
AND a511~kschl = 'YPR0'
AND vkorgau = '5000'
AND zzland1_ag = v_land1
AND loevm_ko <> 'X'.}
Thanks & Regards,
Sateesh.
Edited by: sateesh kumar on Nov 12, 2009 12:59 PM -
How to access the database tables from application
Hii all,
The information in webcenter content, such as meta data fields, users, security groups etc are stored in
database tables like- Revisions, SecurityGroups, Users, DocType etc..
Can we access this tables from an adf application or any webcenter application..
If yes, then what can be the approach for that..??
Another things, how can we create custom tables just like the predefined tables...??
Any information regarding this.??
ThanksCan we access this tables from an adf application or any webcenter application.Yes, you can - like to any other existing database. But I would strongly discourage you from any, but read-only access, or you can easily end up with inconsistent data.
If yes, then what can be the approach for that..??Just create a database connection and define in your model what tables you want to access.
Another things, how can we create custom tables just like the predefined tables...
Actually, WebCenter Content provides functionality of creation of custom tables (see http://docs.oracle.com/cd/E23943_01/doc.1111/e10978/c04_metadata.htm#autoId2 ) and these are probably the only good candidates for read-write access. See further in the manual what use cases are supported. Of course, you could do this even externally, but rather than Data Definition Language, I'd use services (if there are some). -
How to create a database table for educational details
how to create table for this image. i have to develop a job portal website. i created all the tables that required. but i dont know how to store these fields in table. any one help me plz
It would need following tables
1. Employee table where EMpNo field would be included as an attribute. Other fields would be EmployeeName,Designation, ...
It will have Primary Key as EmpID
2. QualificationType table with QualificationCategoryID and QualificationCategory with values Highest Qualification Post Graduate etc
QualificationCategoryID is the primary key
3. QUalificationTypeAttributes tables with fields as QUalificationTypeAttributeID,QUalificationTypeAttributeName
QUalificationTypeAttributeID is primary key
and QUalificationTypeAttributeName will have values Institute Name, Qualification Category etc
4. EmpQualificationTypeValues table with fields
QUalificationTypeValueID, QUalificationTypeAttributeID , QualificationCategoryID , EmpID, Value
QUalificationTypeValueID would be the primary key
for above case values would be like below
Employee
Emp ID EmpNo Name ...
ID1 12345 xxxxxxx
QualificationType
QualificationCategoryID QualificationCategory
CatID1 HIghest Qualification
CatID2 Post Graduate
QUalificationTypeAttributes
QUalificationTypeAttributeID QUalificationTypeAttributeName
QTAID1 Institute Name
QTAID2 Qualification Category
QTAID3 Year Of Passing
QualificationTypeValues
QUalificationTypeValueID QUalificationTypeAttributeID QualificationCategoryID EmpID Value
QTVID1 QTAID1 CatID1 ID1 Your institute Value set from screen for highest qualification
QTVID2 QTAID2 CatID1 ID1 Your qualification category Value set from screen for highest qualification
QTVID3 QTAID3 CatID1 ID1 Your year of passing value set for highest qualification
QTVID4 QTAID1 CatID2 ID1 Your institute Value set from screen for post graduate
QTVID5 QTAID2 CatID2 ID1 Your qualification category Value set from screen for post graduate
QTVID6 QTAID3 CatID2 ID1 Your year of passing value set for post graduate.....
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page -
How to get the database table field names from program
Hi,
Can any one tell me,whether any function module is there which can get the table field name and its details ,when we pass database table name to it.
Thanks in Advance
<REMOVED BY MODERATOR>
Regards
Shibin
Edited by: Alvaro Tejada Galindo on Feb 14, 2008 12:41 PMHi,
DD02L Table contains the SAP Tables.
DD02T Table contains the SAP Table Texts.
DD01L Table contains the Domains
DD01T Table contains the Domain Texts.
DD03L Table contains the Table Fields.
DD03T Table contains the Table Field Texts. (Language Dependent)
DD04L Table contains the Data Elements.
DD04T Table contains the Data Element Texts.
DD05s Table contains the Foreign Key Fields
last words with L and T only. L->Database Fetch T-> Text
For ur question use table DD03L or DD03T.
Regards,
Chandru -
How to trace the change log for a program ? both local and release versions.
Hi experts,
I encounter a very strange problem.
I changed a program, created a new version TR, , there are three versions before my version which are all have been released.
but there is one sentence which is not added by me, could anyone tell me how to find the reason why the sentence in my version.
Any help would be apprecite!
BR,
SummerHi,
Not all the 3 TRs
Goto SE03, Click on Find Requests under Requests/Tasks section.
Give all the 3 requests names in Requests/Tasks, Give User name as *
See any sub tasks are there in the above requests by double clicking on each request.
Or
Goto SE03
Click on Search for Objects in Requests/Tasks under Objects in Requests
Select the first entry R3TR PROG give the program name.
In below Request/Task Selection , check the status Released.
See what all Requests are displayed, who are all the persons who changed them.
Thanks & Regards
Bala Krishna -
How to initialize the setup table for GTMuFF08Global Trade ManagementuFF09?
hi experts,
I can find the datasource of GTM like 2LIS_46_SCL, 2LIS_46_ITM with rsa6.
But when I use rsa3 to do test it, nothing found. I try to initialize the setup table, but I can not find it under SBIW.
Please help me, many thanks.
Brgds/steveHi
These Data Sources are from LOGISTICS Try at Tcode.LBWE --Logistics **** Pit.
Here is LO Cockpit Step By Step
LO EXTRACTION
- Go to Transaction LBWE (LO Customizing Cockpit)
1). Select Logistics Application
SD Sales BW
Extract Structures
2). Select the desired Extract Structure and deactivate it first.
3). Give the Transport Request number and continue
4). Click on `Maintenance' to maintain such Extract Structure
Select the fields of your choice and continue
Maintain DataSource if needed
5). Activate the extract structure
6). Give the Transport Request number and continue
- Next step is to Delete the setup tables
7). Go to T-Code SBIW
8). Select Business Information Warehouse
i. Setting for Application-Specific Datasources
ii. Logistics
iii. Managing Extract Structures
iv. Initialization
v. Delete the content of Setup tables (T-Code LBWG)
vi. Select the application (01 u2013 Sales & Distribution) and Execute
- Now, Fill the Setup tables
9). Select Business Information Warehouse
i. Setting for Application-Specific Datasources
ii. Logistics
iii. Managing Extract Structures
iv. Initialization
v. Filling the Setup tables
vi. Application-Specific Setup of statistical data
vii. SD Sales Orders u2013 Perform Setup (T-Code OLI7BW)
Specify a Run Name and time and Date (put future date)
Execute
- Check the data in Setup tables at RSA3
- Replicate the DataSource
Use of setup tables:
You should fill the setup table in the R/3 system and extract the data to BW - the setup tables is in SBIW - after that you can do delta extractions by initialize the extractor.
Full loads are always taken from the setup tables
Hope it helps -
How to update the database table using webdynpro??
Hi,
Can anybody helm me in updating database table....by entering the values on the output screen of webdynpro component??should i use any commit statement in function module ,which i used to update.hi martina....
consider you are having two input fields bound to attr1 and attr2.
now after pressing the save button:
just read teh two attributes to field1, field2 using code wizard. then
<db name>-<fieldname1> = <field1>.
<db name>-<fieldname2> = <field2>.
insert <dbname>.
---regards,
alex b justin -
How to delete the database table
hi all
i want to delete the data from the custrmize table so if u can heilp me to do that....not the internal table ..i write the code but that using that code i can delete only one raw.. but i want to delete all raw in my table..
ZLAB_SUBMIT-SHADE = '1'.
ZLAB_SUBMIT-SUBMIT = '1'.
ZLAB_SUBMIT-RM = 'RINGS'.
ZLAB_SUBMIT-REMARKS = 'Approved'.
ZLAB_SUBMIT-AP = ''.
ZLAB_SUBMIT-USNAM = 'INDIKAF'.
ZLAB_SUBMIT-CPUDT = '05.10.2006'.
ZLAB_SUBMIT-CDATE = '05.10.2006'.
ZLAB_SUBMIT-CPUTM = '21:29:19'.
DELETE ZLAB_SUBMIT.
regard
nawa
this is my code....Hi,
data itab type standard table of zlab_submit.
select * from zlab_summit into table itab.
delete zlab_summit from table itab.
Kindly reward points by clicking the star on the left of reply,if it helps.
Maybe you are looking for
-
Charging for software on a BRAND NEW iPod Touch?
Glad to hear people are now getting the 2.2 download to work. Has anyone gotten anywhere asking Apple for justification for a $10 software upgrade on a brand new iTouch purchased within 30 days and given as a Christmas gift? (I gave 2!) This is even
-
Opening EOS 5D Mark II is CS4?
I wonder if somebody could help me please. I would like to buy photoshop CS4 for my husband for his birthday (just a couple of weeks a way), but I don't know if it's the right thing or not. My husband has just upgraded his camera (from an EOS 5D to a
-
Recording Cassette Tape - Dolby B & C Question
Hi, I am recording speaking voice from a cassette tape that was recorded without Dolby. I have experimented using Dolby B & C on my tape deck, as I play the cassette, recording it into a Soundtrack Pro project. This reduces the tape hiss quite nicely
-
Hi all, in my classic report i break the report for the Column1 and i need to change the labels of the headers depend of value of Column 1 in the current row in the query. I saw that i can insert PL/SQL code to set the report labels, but how can i ch
-
Partial release of inspection lots
Dear Gurus, I am a PP guy and the business has a requirement in QM. At present QM is used only for raw material incoming inspection. Once you do MIGO automatically inspection lot gets created and the Quality team releases the entire lot using QA16 t