How to transfer from DV tape to DVD through final cut studio?

I would like to take a my 1hr presentation tape from dv format to DVD, without capturing in to final cut pro then exporting to DVD studio and burning a disk. Can I do this?

If you forgo the DVD recorder solution, it doesn't matter which program you capture with ... ALL programs will capture in real time. So if you have a one hour tape, it will take an hour to capture in FCP. It will take an hour to capture in iMovie. It will take an hour to capture in FCE. It will take an hour to capture with QT Pro. It will take one hour to capture with CatDV.
Capturing in FCP will add no more time to the process than any other program used for capturing.
Once it's captured, then it will need to be encoded, authored and burned.
If the goal is to save time, the DVD recorder would be the quickest method. But the OP didn't state his goals.
-DH

Similar Messages

HT200276 HOW WILL I GET THE LOST SERIAL NUMBER OF FINAL CUT STUDIO

HOW WILL I GET THE LOST SERIAL NUMBER OF FINAL CUT STUDIO ???

It's on the back of the installation booklet. If you've lost that, and have some proof of purchase, it can probably be sorted out by contacting Apple.
Russ

Imac 27" . Canopus advc55 firewire in from SVHS tape. Either crashes Final Cut Pro X or has gaps in transfer when sync lost between camera shots.

I have been trying for a few days to dump my SVHS camera tapes to Final Cut Pro X. Using the Canopus ADVC55 encoder fed from a Panasonic SVHS video deck into iMac firewire. The picture appears on screen but will not save as an archive atall. Trying to import into an event has a little more success. When it comes across a section of tape between camera shots without sync it either crashes Final Cut or randomly picks up the replay later or trims the shots down by about a minute. Not sure what to do to let to allow it to import a tape complete with blank sections. I have a Panasonic SVHS deck with timebase correction on output, would this help maintain a constant sync signal for the ADVC55 and final cut pro? Very frustrating just trying to dump videos to digital.

Footnote to this problem. Put a Panasonic WJ-EV5 video mixer inline between deck and Canopus ADVC55 and this maintains the sync for perfect copies. If the red light on the ADVC55 comes on during the import to event sync has been lost and FCPX crashes or aborts the copy in various ways with unpredictable files.
The import to archive still will not store the data.
Maybe Final Cut authors can explain why import to event works but import to archive does not.
Using version 10.0.8 FCPX

I'm trying to log and transfer from a pro res file (HQ) final cut s7 is telling me it is an unsupported format. What the?

i have a 58 min pro res hq file that is a .mov. it is in a folder on my hdd. i'm trying to syn rushes by logging and transferring clips from this file but i cannot bring the said file into log and transfer. final cut putsup a window that tells me the file is in an unsupported format. and to bring in a file with a supported pathway. this i do not understand. any simple explanation as to what i'm missing?

Thanks meg. I'm trying not to have to sync all the rushes in a timeline. All rushes are in the one 58 min prores file. I wanted to, I guess, log and capture the rushes as clips that I logg in the log and transfer winnow and that it would then log and sort out the material as proxy files. I'm guessing I'm just being lazy or it can't be done. Thanks for the reply but I was looking for a differentbway round than a straight import of the whole file.
M

Missing Audio from FCP to Soundtrack Pro in Final Cut Studio 2

I've been trying to edit a sequence from Final Cut Pro 6 in Soundtrack 2 by sending the sequence to soundtrack as a multitrack project. For some reason, when I send it, multiple audio files from the original sequence are completely missing, and I have no clue why. They're .mov files from the original import of footage.
Anyone know why these don't transfer and how to fix it?

Hi
I too have had trouble with Audio from FCP 6 messing up in STP 2. My opinion is that the process works if the audio tracks in FCP are either Mono sourced or stereo sourced and are never relinked, split to mono (in the case of stereo files) in FCP during editing. God forbid you unpair a stereo track and delete one channel!
Once in STP I have had occasions where non audio appears, the wrong track appears... or sometimes the wrong audio!
Once in a while double clicking on the offending clip in STP to open it in a Wave window seems to show the right audio. Either saving it of closing the window ( command/w) restores the right material to the clip in STP.
You could right click on the audio in FCP and "send to STP Audio Project". Hopefully the correct audio is opened in STP. Then save it. Now re-export the Multitrack project and see if the audio makes the trip.
Or, you could export the Audio directly from FCP, then import it into STP and position it against the video manually.
One warning : once things start going pear shaped in the FCP-STP workflow, it's my experience that I'm fighting problems all the way. It's why I don't use STP for FCP mixing .... I want to, but its too risky.
I hope V3 is better.
Best
Lee

DVDs through Final CUT PRo

Is it possible to run a DVD and record it into FInal cut pro?
I was thinking if I attach my DV VHS combo to the DVD player and then through the computer it might work.
Also does the VOB file that you get from DVD shrink on a PC import into final cut pro? Is there an equivalent of shrink on the mac?
thanks
dan

With a program called Cinematize, you can take any video from an unprotected DVD and save it as many different formats that you can import into FCP. You have a lot of control over the video and audio exporting, and you can choose the clips you want to use.
http://www.miraizon.com/products/products.html
I have had many clients bring in DVD's of their home movies that they have already had transfered. Because the DVD's are not copyright protected I can pull the desired clip from the DVD and use it as I please. I would recomend looking into this program or something similar as others have suggested. Cinemtize is very simple to use.

Can I shoot with a NTSC camera and convert to a PAL dvd through Final Cut

i am shooting a wedding for someone in Scotland that will be getting married in the States, and she wants a PAL dvd. Can i shoot the video with my NTSC camera (HVX 200) and with Final Cut convert it to PAL? If not can it be done someway?

the prefered way is to standards convert the video and import it into a PAL sequence
http://www.nattress.com/Products/standardsconversion/standardsconversion.htm
an alternative is to produce an NTSC DVD; it will playback on a computer; Mac or PC, it might play back on the users hardware DVD player/ TV combination but it might not, no guaranteed there.
Best bet is option 1

How much can i get Final Cut Studio 2?

Hi,
*in fact, i love this program so so much and i will get it to make tutorials in my blog or website as well but i can't buy it because it is so expensive for me and i'm student too,now i have some questions:-*
*1-is there discount for this program?.*
*2-can i get motion 3 only and buy final cut Express to make my tutorials?.*
*3-i don't need sound track and dvd studio so can i get custom dvd for Final Cut Studio 2 with low price?.*
*Thank you very much and keep going Apple i love you.*
*Best regards,*
*Khaled Samir.*

1. There are academic discounts directly from Apple - though I do not know how it will work outside of the US. Google Apple Education and go to the education portion of the apple website.
2&3. You can not purchase any of the applications independently from the whole Studio package or get a reduced price because you will not use one or two of them.
Final Cut Express has a great deal of the functionality of Final Cut Pro but it will work only with DV and HDV video. It does not work with non-standard image sizes/codecs.
x

Is it possible to export Final Cut Pro X or .MOV to DVD Studio Pro (Final Cut Studio)?

Is it possible to export Final Cut Pro X projects or .MOV to DVD Studio Pro (from Final Cut Studio v.3)? I'm using the free trial of Final Cut Pro X and later acquired a copy of Final Cut Studio (FCP 7, Compressor 3.5, DVD Studio Pro 4, Color 1.5, Motion 4, Soundtrack Pro 2).
I don't like the default DVD export in FCPX, so I would like to do it on DVD Studio Pro. Is it possible to export the project or the final .MOV file to DVD Studio Pro?
Additionally, can I use unfinished FCPX projects on FCP7?
Is it possible to export from FCPX to Compressor 3.5 (Final Cut Studio)?
Feedback would be greatly appreciated. As of this post, I have about 13 days left on my FCPX trial. Or would it just make sense to just use Final Cut Pro 7, since I have a permanent copy of it?
Thank you.
P.S. Where would be the best place to store projects or any other file related to Final Cut Studio or Final Cut Pro X? My MacBook Pro has 320GB built in storage (only 60GB available), and I have a 1TB external hard drive.
What is best to store on the Macintosh internal hard drive?
What is best to store on the external hard drive?

Yes you can make DVDs in DVDSP using video exported from FCPX.
There are some apps that will translate between X and 7- that said I would highly recommend not going back and forth as the translations are not 1:1 perfect.
I would recommend storing all Events and Projects on the External drive.
Compressor 3.5 will not accept exports directly from FCPX- you'll need Compressor 4 which is $49.
Totally up to you whether you want to make the jump to X. 7 is an EOL'ed program, meaning there will not be another version of that application. Final Cut Pro X is the version being actively developed now.

Computer was stolen--how to transfer from iPod to new computer

My computer was stolen and I want to transfer my iPod library to my new computer. I know how to transfer from one computer to another using an iPod but is there a way to do it when I don't have the computer that has my iTunes library?

There are a number of third party utilities you can use to retrieve the files from your iPod. This is just a selection.
YamiPod
PodUtil
PodPlayer
iPodAgent
There is also a manual method of accessing the iPod's hard drive posted in this thread: iPod to iTunes
If your iPod was set for automatic update change it to manual update. While connecting the iPod to the computer, hold down the Shift + Ctrl keys. This will stop the iPod from auto-syncing with iTunes and the iPod will appear in the source list. Wait until you are sure the iPod has mounted, and that it will not auto sync and then you can let the keys go. This may take between 3 and 30 seconds depending on your computer. Then go to Preferences>iPod and check the "Manually manage songs and playlists" box.
Keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync again.
Another way is to connect your iPod and before it starts to sync, click the little X on the right hand side of the display beside the "Do Not Disconnect" message. The display is the little window to the right of the iTunes control buttons: iPod Interface
Or you could look at the method described in this link: How to keep iTunes from automatically updating your iPod
Go with whichever method you feel most comfortable. If at any point you are asked if you want to link your iPod to a new library, click No.

Lost my contacts, how to transfer from macbook pro to ipad

lost my contacts, how to transfer from macbook pro to ipad

Which OS X is installed on your Mac ?
Click the Apple () menu top left in your screen. From the drop down menu click About This Mac.
The version is noted there.
Minimum system requirements for syncing data from a Mac to an iPad is v10.6.8 > Apple - iPad: Technical Specifications
Your profile indicats your Mac has v10.4.11 installed ??

How do transfer from iPad one to iPad three

Was wanting to know how u transfer from iPad one to iPad three

First, sync the iPad 1 to your computer with iTunes.
Then, sync the new iPad 3 through iTunes where you can restore the most recent backup to the new iPad.

HT201250 how to transfer from mac to mac using time machine

how to transfer from mac to mac using time machine

See How do I set up a new Mac from an old one, its backups, or a PC?

How can I convert MiniDV tapes to DVD? I've use a Canon GL 2 and an iMac about 1 year old. I'm trying to use iMovie and I've installed the latest drivers.

How can I convert MiniDV tapes to DVD? I've use a Canon GL 2 and an iMac about 1 year old. I'm trying to use iMovie and I've installed the latest drivers.

MiniDV was a great format, one I still use often. I also still use iMovie HD6 to process it and, for all the iterations of iMovie that followed it, I still believe it was one of Apple's greatest movie software programmes, next to Final Cut Pro, using a timeline method of editing. That was also in the day which Apple put Superdrives into their computers, so that you could not only make your movie in iMovie, but you could render it to iDVD and then burn the DVD. Now you need to buy an external burner.
Since iMovie HD6 and iDVD 6 were "universal" software, it has continued to work through the many OS releases since it came out with Tiger, I believe it was. So, it may still work with Mavericks too and, if you could locate a copy of iLife 06, probably used, you might enjoy the difference that HD6 has over all iMovie releases since then.
Not saying you can't process your MiniDV with current iMovie versions, but I'm not the one to speak about that.

HT4589 How do I change the audio to dual mono from stereo when using Share to DVD in Final Cut 10.1?

How do I switch the audio to Dual Mono from Stereo when using Share in Final Cut Pro 10.1? Even though the audio is all in dual mono in the timeline, it lists it as stereo in the share box.

Hi rationale1,
Welcome to the Support Communities!
The share to DVD settings in Final Cut Pro X use the Dolby Digital settings which are stereo for DVDs. So this can’t be done directly in Final Cut Pro X.
The link below will explain the Dolby Digital parameters and options in Compressor 4. You may need to research a different DVD authoring software to achieve your desired result.
Dolby Digital - Compressor 4 User Manual
http://help.apple.com/compressor/mac/4.1/#cpsrb71736a2
Dolby Digital
The built-in Dolby Digital settings (in the Create Blu-ray and Create DVD destinations, as well as the built-in AC-3 and EC-3 audio settings) use the Dolby Digital transcoding format. This format encodes Dolby Digital (AC-3) and Dolby Digital Plus (EC-3) audio files that contain multiple audio channels, including 5.1 surround sound. You can also create custom settings that use the Dolby Digital transcoding format.
Note: All files intended for video and audio DVD authoring must have a 48 kHz sample rate as required by the DVD specification.
DVD Video: Choose this option if you’re encoding for use in a DVD video authoring application.
DVD Audio: Choose this option if you’re encoding for use in a DVD audio authoring application.
Tip: For stereo encoding, rates of 192 kbps and 224 kbps are typical and will produce good results. For Dolby Digital 5.1 encoding, a rate of 384 kbps is recommended. For 5.1 Dolby Digital Plus encoding, a rate of 192 kbps is recommended.
Cheers,
Judy

How to transfer from DV tape to DVD through final cut studio?

Similar Messages

Maybe you are looking for