How to transfer sales bom from SAP R/3 to APO?

Hi Experts,
I just want to ask how to transfer sales bom from R/3 to APO? if i change my bom usage to 5 and use this BOM in my Production version be enough to send it to APO?
Also, this is my first time using sales bom, could you please help me understand how sales bom work in APO planning?
Thanks so much.
Mylene

Hi Senthil,
Thanks again for your reply. I was trying to CIF sales BOM in APO but only the header material are being created in APO. The component are not added in PDS. This is how I create it in SAP R/3:
1. transaction cs01 --> enter header material, plant and BOM USAGE =5
2. inside cs01, i entered components, quantity for each components and ITEM category = L (stock item)
i also eneterd base quantity for header material
3. create production version for header material with routing and this BOM
4. create and activate material CIF model for header and components
5. create and activate PDS CIF model for header and components.
After doing all these steps, PDS is created in APO but I only have the header material (no components)
I tried changing BOM to other bom usage and components were populated in PDS.
Am i missing nay steps? Thanks.
Regards,
Mylene

Similar Messages

How to transfer Sales BOM from ECC to APO DP

Hi,
Demand planning require Sales BOM from ECC. Sales BOM in ECC will not have Routing & Work center, then how a PPM with Sales BOM can be transferred. If i have to create a dummy routing & WC for those sales BOM it will be tidious job to create all the master data. Is there any way to transfer the BOM alone from ECC to APO.
Please throw some light on it.
Thanks & Regards
Shan

Hi Somnath / Ritesh,
Are you sure about ciffing Sales BOM(usage 5)to APO as PDS ? Did you test it or your comments are based on SAP documentation?
I tried to CIF Sales BOM as SNP PDS, it is creating PDS with only parent item.Child items are missing.I have not used any production version here.
If i use production BOM(usage 1), it is creating PDS with both parent and child items.I have not used any production version here also.
SAP says BOMs can be ciffed to APO as PDS. No productions versions are required. but it has not mentioned about BOM's usage. May be , Is it by default production BOM?
One more question, Is it possible to create production version with BOM usage 5? It has no meaning right..
I think system does not allow you to create production version with BOM usage 5.
I also tried with BOM usage 2. In this case also it behaves like sales BOM.
looks like only production BOM can be ciffed with proper BOM structure in APO.
if required i can send you the link to share screen shots.
Pls comment..
regards,
Umamahesh

How to Transfer Customizing Data from SAP ECC6 to SAP Solution Manager

Hi all,
I want to Transfer Customizing Data (such as organization structure) from SAP ECC6 to SAP Solution Manager.Please tell me how. Thanks.

Hi,
The system cannot capture the customizing data from your ECC6. This is another myth with SAP Solution Manager. Solution Manager can only smoothen the process of your Project Management.
Hope this solves your problem.
Feel free to revert back.
--Ragu

Transfer Sales orders from sap to non sap

Hi,
I want to tranfer the data meaning sales orders from my SAP system to
external system
Has anybody worked on this or any ideas.
Rgds

Hi,
Use orders idoc and IDOC_OUTPUT_ORDERS Function module to sent the sales order data from SAP to other system. Please check you have all the ALE configuration done in your systems.
KR Jaideep,

Transfer article master from SAP R/3 To External Systems(Futura) Using IDOC

Dear Experts
Please let me know how to Transfer article master from SAP R/3 To External Systems(Futura) or text file Using IDOCs.
thanks

Hello,
Since you want to transfer Article Master, it should be a Retail System. So you should use Message Type ARTMAS. For fullbuild, you can use transaction WDBM and for changes, you can use WDBU. For changes, you can enable change pointers for required fields using BD64.
Thanks,
Venu

How to Extract sales document from r/3 ?

hi,
How to extract sales data from SAP R/3 considering all fields of data in different tables?
Thanks & regards,
Gopi.

Hi Gopi,
It depends what data you need to extract but most of the data would be available in following tables :
Sales
VBAK - Header
VBAP - Item
VBPA - Sales Document Partner
Shipment
VTTK - Shipment Header
VTTP - Shipment Item
Delivery
LIKP - Delivery Header
LIPS - Delivery item
Customer
KNA1 - Customer Master
KNB1 - Customer Master (Company Code)
Cheers,
Vikram
Pls reward for helpful replies!!

How to store multiple files from SAp in to Application server?

Hi Guys,
             Can anybody tell me how to store multiple files from SAP into Application server.in my application i have to get the data from SAP tables BSEG , BKPF , BSAK and BSIK that to daily i have to do.
            Any Logic or Code for how to do is welcomed.
                    plz help me urgently.
Thanks,
Gopi

Hi,
directories creates basis. If you have task to store data in application server you already should have information into which folder you have to do it. If you don't have this information because it is just for example training for next task then you can use your personal folder into which you have access. To get list of all available folders please look at attached code and form get_directories (you get the list of folders you see in transaction AL11). But don't forget: If you are using open dataset you have to have rights to access application folder!
Here you are code which I use to upload text files from local disc into application folder
Regards,
Karol
*& Report FILE_PC_TO_SAP
REPORT FILE_PC_TO_SAP.
DATA: BEGIN OF searchpoints OCCURS 100,
        DIRNAME(200)     TYPE c, " name of directory.
        sp_name(100)     TYPE c," name of entry. (may end with *)
      END OF searchpoints.
DATA: BEGIN OF isearchpoints OCCURS 10,
        dirname(75) TYPE c,            " name of directory.
        aliass(75) TYPE c,            " alias for directory.
        svrname(75) TYPE c,            " svr where directory is availabl
        sp_name(75) TYPE c,            " name of entry. (may end with *)
        sp_cs(10)   TYPE c,            " ContainsString pattern for name
      END OF isearchpoints.
data: l_file type filetable.
data: l_rc   type i.
data: itab   type TABLE OF string.
data: g_tmp_file_path type rlgrap-filename.
data: wa_itab type string.
data: h_destin(100) type c.
data: dat      type string.
INITIALIZATION.
perform get_directories.
START-OF-SELECTION.
parameters: in_file type string OBLIGATORY LOWER CASE.
parameters: destin(100) type c OBLIGATORY LOWER CASE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
   FILENAME                      = in_file
   "FILETYPE                      = 'BIN'
   FILETYPE                      = 'ASC'
   HAS_FIELD_SEPARATOR           = ' '
   HEADER_LENGTH                 = 0
   READ_BY_LINE                  = 'X'
   DAT_MODE                      = ' '
TABLES
    DATA_TAB                     = itab
EXCEPTIONS
   FILE_OPEN_ERROR               = 1
   FILE_READ_ERROR               = 2
   NO_BATCH                      = 3
   GUI_REFUSE_FILETRANSFER       = 4
   INVALID_TYPE                  = 5
   NO_AUTHORITY                  = 6
   UNKNOWN_ERROR                 = 7
   BAD_DATA_FORMAT               = 8
   HEADER_NOT_ALLOWED            = 9
   SEPARATOR_NOT_ALLOWED         = 10
   HEADER_TOO_LONG               = 11
   UNKNOWN_DP_ERROR              = 12
   ACCESS_DENIED                 = 13
   DP_OUT_OF_MEMORY              = 14
   DISK_FULL                     = 15
   DP_TIMEOUT                    = 16
   OTHERS                        = 17.
IF sy-SUBRC <> 0.
write: / 'Error during loading input file!'.
ENDIF.
if h_destin is INITIAL.
h_destin = in_file.
endif.
CONCATENATE destin h_destin into dat SEPARATED BY '/'.
*TRANSLATE dat TO UPPER CASE.
OPEN DATASET dat FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-SUBRC = 0.
loop at itab into wa_itab.
     TRANSFER: wa_itab TO dat.
endloop.
CLOSE DATASET dat.
write: / 'File uploaded!'.
ELSE.
write: / 'Not possible to open dataset'.
ENDIF.
at selection-screen on value-request for in_file.
perform select_input_file_name.
loop at l_file into g_tmp_file_path.
    move g_tmp_file_path to in_file.
    h_destin = ''.
    SPLIT g_tmp_file_path at '\' into table itab.
    loop at itab into g_tmp_file_path.
      h_destin = g_tmp_file_path.
    endloop.
endloop.
at selection-screen on value-request for destin.
DATA: lt_dfies    TYPE TABLE OF dfies.
DATA: lwa_dfies   TYPE dfies.
CALL FUNCTION 'DDIF_FIELDINFO_GET'
    EXPORTING
      tabname    = '/BI0/PCO_AREA'
      lfieldname = 'CO_AREA'
    IMPORTING
      dfies_wa   = lwa_dfies.
lwa_dfies-tabname = 'searchpoints'.
lwa_dfies-REPTEXT   = 'Destination directory'.
lwa_dfies-LENG      = 100.
lwa_dfies-INTLEN    = 100.
lwa_dfies-OUTPUTLEN = 100.
lwa_dfies-fieldname = 'SP_NAME'.
APPEND lwa_dfies TO lt_dfies.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      RETFIELD = 'SP_NAME'
      DYNPPROG = SY-REPID
      DYNPNR = SY-DYNNR
      DYNPROFIELD = 'destin'
      VALUE_ORG = 'S'
    TABLES
      VALUE_TAB = searchpoints
      FIELD_TAB = lt_dfies
    EXCEPTIONS
      PARAMETER_ERROR = 1
      NO_VALUES_FOUND = 2
      OTHERS = 3.
*&      Form select_input_file_name
*       text
form select_input_file_name.
* call function 'F4_FILENAME'
*       exporting
*            program_name = sy-repid
*            dynpro_number = sy-dynnr
*            field_name    = 'PATH'
*       importing
*            file_name     = g_tmp_file_path.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
EXPORTING
WINDOW_TITLE = 'Please choose a file'
"default_extension = '*.TXT'
"default_filename = 'C:\*.txt'
initial_directory = 'C:\'
file_filter = '*.*'
CHANGING
FILE_TABLE = l_file
RC = l_RC
EXCEPTIONS
FILE_OPEN_DIALOG_FAILED = 1
CNTL_ERROR = 2
ERROR_NO_GUI = 3
NOT_SUPPORTED_BY_GUI = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.                    "select_input_file_name
*&      Form WRITE_DB_HOME
*       Write DB home directory
*       no parameters
FORM write_db_home.
CASE sy-dbsys(3).
    WHEN 'ORA'.
      CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ORAHOME'
                         ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
*      PERFORM flip_flop(rsora000) USING cflag.
*      WRITE: / 'DIR_ORAHOME',       30 searchpoints-dirname.
      MOVE: 'DIR_ORAHOME'        TO searchpoints-sp_name.
      APPEND searchpoints.
*--- C5056155 End   of ALV -------------------------------*
    WHEN 'ADA'.
      CALL 'C_GETENV' ID 'NAME' FIELD 'DBROOT'
                      ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
*      PERFORM flip_flop(rsora000) USING cflag.
*      WRITE: / 'DIR_ADA_DBROOT',    30 searchpoints-dirname.
      MOVE: 'DIR_ADA_DBROOT'     TO searchpoints-sp_name.
      APPEND searchpoints.
*--- C5056155 End   of ALV -------------------------------*
    WHEN 'INF'.
      CALL 'C_GETENV' ID 'NAME' FIELD 'INFORMIXDIR'
                      ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
*      PERFORM flip_flop(rsora000) USING cflag.
*      WRITE: / 'DIR_INF_INFORMIXDIR', 30 searchpoints-dirname.
      MOVE: 'DIR_INF_INFORMIXDIR' TO searchpoints-sp_name.
      APPEND searchpoints..
*--- C5056155 End   of ALV -------------------------------*
    WHEN 'DB6'.
      CALL 'C_GETENV' ID 'NAME' FIELD 'INSTHOME'
                      ID 'VALUE' FIELD searchpoints-dirname.
      IF sy-subrc = 0.
*--- C5056155 Start of ALV -------------------------------*
*        PERFORM flip_flop(rsora000) USING cflag.
*        WRITE: / 'DIR_DB2_HOME',    30 searchpoints-dirname.
        MOVE: 'DIR_DB2_HOME'       TO searchpoints-sp_name.
        APPEND searchpoints.
*--- C5056155 End   of ALV -------------------------------*
      ELSE.
        EXIT.
      ENDIF.
    WHEN OTHERS.
      EXIT.
ENDCASE.
ENDFORM.                    " WRITE_DB_HOME
FORM get_directories.
* get the name and aliases of ALL userdefined directories
SELECT * FROM user_dir INTO isearchpoints
    WHERE svrname = sy-uname.
    MOVE isearchpoints-dirname to searchpoints-dirname.
    MOVE isearchpoints-aliass to searchpoints-sp_name.
    APPEND searchpoints.
ENDSELECT.
SELECT * FROM user_dir INTO isearchpoints
    WHERE svrname = 'all'.
    MOVE isearchpoints-dirname to searchpoints-dirname.
    MOVE isearchpoints-aliass to searchpoints-sp_name.
    APPEND searchpoints.
ENDSELECT.
* Get DB home
IF sy-dbsys(3) = 'ADA'.
    PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ATRA'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ATRA'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_BINARY'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_BINARY'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory $DIR_CCMS
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CCMS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CCMS'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_LOGGING'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_LOGGING'     TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_RUN'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_RUN'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DATA'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DATA'           TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'DB6'.
    PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DBMS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DBMS'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXECUTABLE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXECUTABLE'     TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXE_ROOT'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXE_ROOT'       TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN'            TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN_ROOT'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN_ROOT'       TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GLOBAL'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GLOBAL'         TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_EXE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_EXE'      TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_LIB'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_LIB'      TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_HOME'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_HOME'           TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'INF'.
    PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTALL'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTALL'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTANCE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTANCE'       TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LIBRARY'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LIBRARY'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LOGGING'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LOGGING'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the files written by the memory inspector
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_MEMORY_INSPECTOR'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_MEMORY_INSPECTOR' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'ORA'.
    PERFORM write_db_home.
ENDIF.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PAGING'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PAGING'         TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PUT'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PUT'            TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PERF'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PERF'           TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROFILE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROFILE'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROTOKOLLS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROTOKOLLS'     TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_REORG'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_REORG'          TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ROLL'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ROLL'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_RSYN'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_RSYN'           TO searchpoints-sp_name.
APPEND searchpoints.
* calculate directory for saphostagent (no sapparam available...)
IF ( sy-opsys(3) = 'WIN' ) OR ( sy-opsys(3) = 'Win' ).
    DATA: windir_path(64), programfiles_path(64).
*   hoping that ProgramFiles is set in service user environment
    CALL 'C_GETENV' ID 'NAME' FIELD 'ProgramFiles'
                    ID 'VALUE' FIELD programfiles_path.
    IF programfiles_path IS INITIAL.
*     %ProgramFiles% not available. guess from windir
      CALL 'C_GETENV' ID 'NAME' FIELD 'windir'
                      ID 'VALUE' FIELD windir_path.
*     e.g. S:\WINDOWS ==> S:\Program Files
      CONCATENATE windir_path(3) 'Program Files' INTO programfiles_path.
    ENDIF.
    CONCATENATE programfiles_path '\SAP\hostctrl'
                                             INTO searchpoints-dirname.
ELSE.
*   on UNIX, the path is hard coded
    searchpoints-dirname = '/usr/sap/hostctrl'.
ENDIF.
MOVE: 'DIR_SAPHOSTAGENT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SAPUSERS'
                     ID 'VALUE' FIELD searchpoints-dirname.
IF searchpoints-dirname = '.'.
    IF sy-opsys = 'Windows NT'.
      searchpoints-dirname = '.\'.
    ELSE.
      searchpoints-dirname = './'.
    ENDIF.
ENDIF.
MOVE: 'DIR_SAPUSERS'       TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SETUPS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SETUPS'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SORTTMP'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SORTTMP'        TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SOURCE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SOURCE'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TEMP'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TEMP'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRANS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRANS'          TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRFILES'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRFILES'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRSUB'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRSUB'          TO searchpoints-sp_name.
APPEND searchpoints.
* get the name of the current server.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'rdisp/myname'
                     ID 'VALUE' FIELD searchpoints-dirname.
data: h_ind type i.
LOOP AT searchpoints.
    h_ind = sy-tabix.
    IF searchpoints-sp_name IS INITIAL.
      DELETE searchpoints INDEX h_ind.
    ENDIF.
ENDLOOP.
ENDFORM.

Creating a Sales BOM in SAP CRM 7.0

Hi All,
How to create a Sales BOM in SAP CRM 7.0 system? What is the transaction code for it ? I want to define a high level Package material in the BOM and 3-4 low level items in this BOM. What are the steps to achieve this ? We do not have ECC system connected to CRM and we are using CRM 7.0 as stand-alone system.
Thanks in advance.
--R D

Hi R D,
Please could you let me know how you achieved this. I am trying to do the same thing. But when I assign products in the component relationship, it does not explode when I use it in a contract. Please let me know if the solution you used.
Regards,
Neena.

How to transfer the data from R/3 to APO

Hi Gurus,
How to transfer the data from R/3 to APO.
I do have 4 Ztables in R/3 can I pass this Ztables data to APO when sales order is created in APO .
Thanks & Regard,
Mohammed Ali.

Welcome to SDN.
refer this link
creating integration model
Give ur mail id i will send the document which i have.
With regards.
Maya.

Transfer Sales Order from client to client

Hi All,
I am trying to transfer sales order from one sap to other sap system.Here i am using ale idoc process.In the system there are some sales orders,i need to transfer that to other system.we configured message type and added out put types as ALE and it is sending idoc to other sap system and it is not creating automatically so in debug mode i can run that and creating sales order.Here i am facing some issues like
1) Condition types like (ZJPR) manual condition type for base and insurance is not transferring,and i can not see in this in outbound idoc.
2) Will it create sales order automatically or do we need run manually.
All valuable suggestions are welcome.if it not a right place then i can move this to ABAP Connectivity.
Regards,
Madhu.

Thanks Madhu -
Could you please Check that your Distribution Model is setup correctly.You should have Message type ORDERS in your sending and receiving System.
Sender System
Receiver System
If Above setting is not reflected in your system then either create New Distribution model or delete message type from existing Model.-----Add New Message Type-----and distribute model from Sender system.
Regards
Amit

How to transfer file from ipod touch to i tunes. i have files in my ipod , ut itunes is new so its telling if u sync the ipod all the files will be replaced but no files in the itunes.. so kindly help me how to transfer the files from i pod to itunesb

how to transfer file from ipod touch to i tunes. i have files in my ipod , ut itunes is new so its telling if u sync the ipod all the files will be replaced but no files in the itunes.. so kindly help me how to transfer the files from i pod to itunes......

Some of the information below has subsequently appeared in a document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991
Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was designed for you maintaining a master copy of your media on a computer which is itself properly backed up against loss. Syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchased content.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only media purchased from iTunes Store
For transferring other items from an i-device to a computer you will have to use third party commercial software. Examples (check the web for others; this is not an exhaustive listing, nor do I have any idea if they are any good):
- Senuti - http://www.fadingred.com/senuti/
- Phoneview - http://www.ecamm.com/mac/phoneview/
- MusicRescue - http://www.kennettnet.co.uk/products/musicrescue/
- Sharepod (free) - http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2 - Windows
- Snowfox/iMedia - http://www.mac-videoconverter.com/imedia-transfer-mac.html - Mac & PC
- iexplorer (free) - http://www.macroplant.com/iexplorer/ - Mac&PC
- Yamipod (free) - http://www.yamipod.com/main/modules/downloads/ - PC, Linux, Mac [Still updated for use on newer devices? No edits to site since 2010.]
- 2010 Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive - https://discussions.apple.com/docs/DOC-3141 - dates from 2008 and some outdated information now.
Copying Content from your iPod to your Computer - The Definitive Guide - http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/ - Information about use in disk mode pertains only to older model iPods.
Get Your Music Off of Your iPod - http://howto.wired.com/wiki/Get_Your_Music_Off_of_Your_iPod - I am not sure but this may only work with some models and not newer Touch, iPhone, or iPad.
Additional information here https://discussions.apple.com/message/18324797

How to get purchasing data from SAP R/3 to OWB (Oracle warehouse builder).

Hi,
My name is Pavan Tata. I work as a SAP BW developer. Here is the situation at my client place. Client decided to retire BW system and wants to replace with OWB(Oracle warehouse). In all this currently we have purhchasing application in BW production system and wants to move this application to OWB for the same type of reporting what they are getting currently.
Here is my question:
How to get purchasing data from SAP R/3 to OWB(Warehouse) with initial full loads and deltas mechanism in the same way as we do in BW.
Please help on this, also send me any documentation about this if you have.
Thanks,
Pavan.

Hello,
here is a short report which converts S012 entries to strings with separator semicolon. Perhaps this will help you?
Regards
Walter Habich
REPORT habitest2 LINE-SIZE 255.
TYPES:
strtab_t TYPE TABLE OF string.
CONSTANTS:
separator VALUE ';'.
DATA:
it_s012 LIKE s012 OCCURS 0,
wa_s012 LIKE s012,
strtab TYPE strtab_t,
strele TYPE string.
SELECT * FROM s012 INTO TABLE it_s012 UP TO 100 ROWS.
PERFORM data_to_string
TABLES
    strtab
USING
    'S012'. "requires it_s012 and wa_s012
LOOP AT strtab INTO strele.
WRITE: / strele.
ENDLOOP.
*&      Form data_to_string
FORM data_to_string TABLES strtab TYPE strtab_t
                    USING ittab TYPE any.
DATA:
    h_zaehler TYPE i,
    line_str TYPE string,
    l_tabellenname(10) TYPE c,
    l_arbeitsbereichsname(10) TYPE c,
    h_string TYPE string,
    h_char(255) TYPE c.
FIELD-SYMBOLS: <l_tabelle> TYPE ANY TABLE,
                 <l_arbeits> TYPE ANY,
                 <feldzeiger> TYPE ANY.
CLEAR strtab.
CONCATENATE 'IT_' ittab INTO l_tabellenname.
ASSIGN (l_tabellenname) TO <l_tabelle>.
CONCATENATE 'WA_' ittab INTO l_arbeitsbereichsname.
ASSIGN (l_arbeitsbereichsname) TO <l_arbeits>.
LOOP AT <l_tabelle> INTO <l_arbeits>.
    CLEAR: h_zaehler, line_str.
    line_str = ittab.
    DO.
      ADD 1 TO h_zaehler.
      ASSIGN COMPONENT h_zaehler OF
        STRUCTURE <l_arbeits> TO <feldzeiger>.
      IF sy-subrc <> 0. EXIT. ENDIF.
      WRITE <feldzeiger> TO h_char LEFT-JUSTIFIED.          "#EC *
      h_string = h_char.
      CONCATENATE line_str separator h_string INTO line_str.
    ENDDO.
    APPEND line_str TO strtab.
ENDLOOP.
ENDFORM.                    "data_to_string

How to extract Inventory data from SAP R/3 system

Hi friends How to extract Inventory data from SAP R/3 system? What are report we may expect from the Inventory?

Hi,
Inventory management
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20handle%20inventory%20management%20scenarios.pdf
How to Handle Inventory Management Scenarios in BW (NW2004)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Loading of Cube
ref.to page 18 in "Upgrade and Migration Aspects for BI in SAP NetWeaver 2004s" paper
http://www.sapfinug.fi/downloads/2007/bi02/BI_upgrade_migration.pdf
Non-Cumulative Values / Stock Handling
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
Non-Cumulatives
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
Here you will find all the Inventory Management BI Contents:
http://help.sap.com/saphelp_nw70/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
2LIS_03_BX- Initial Stock/Material stock
2LIS_03_BF - Material movements
2LIS_03_UM - Revaluations/Find the price of the stock
The first DataSource (2LIS_03_BX) is used to extract an opening stock balance on a
detailed level (material, plant, storage location and so on). At this moment, the opening
stock is the operative stock in the source system. "At this moment" is the point in time at
which the statistical setup ran for DataSource 2LIS_03_BX. (This is because no
documents are to be posted during this run and so the stock does not change during this
run, as we will see below). It is not possible to choose a key date freely.
The second DataSource (2LIS_03_BF) is used to extract the material movements into
the BW system. This DataSource provides the data as material documents (MCMSEG
structure).
The third of the above DataSources (2LIS_03_UM) contains data from valuated
revaluations in Financial Accounting (document BSEG). This data is required to update
valuated stock changes for the calculated stock balance in the BW. This information is
not required in many situations as it is often only the quantities that are of importance.
This DataSource only describes financial accounting processes, not logistical ones. In
other words, only the stock value is changed here, no changes are made to the
quantities. Everything that is subsequently mentioned here about the upload sequence
and compression regarding DataSource 2LIS_03_BF also applies to this DataSource.
This means a detailed description is not required for the revaluation DataSource.
http://help.sap.com/saphelp_bw32/helpdata/en/05/c69480c357354a8846cc61f7b6e085/content.htm
http://help.sap.com/saphelp_bw33/helpdata/en/ed/16c29a27db6e4d81a015be8673eb80/content.htm
These are the standard data sources used for Inventory extraction.
Hope this helps.
Thanks,
JituK

How to extract PS data from sap r/3 to bw

Hi,
How to extract PS data from sap r/3 to bw
PS data like plans,budget,accurals&commitmnets
can any one help me regarding this..
Thanks in Advance,
Shankar.

HI sankar,
you can refer the belkow link to find the details on the relevant extractors and infoproviders
http://help.sap.com/erp2005_ehp_04/helpdata/EN/17/416d030524064cb2b8d58ffb306f3a/frameset.htm
Regards,
Sathya

HT5824 Does anyone know how to transfer my contacts from my iphone onto my icloud that is on my laptop please? I have lokd and tryed everything and still i have no idea how to do it.Yur help would be apreiated.thanks

Does anyone know how to transfer my contacts from my iphone onto my i cloud please? I cnnot do it no more s they have made something so simple to do into a task that seems so omplicated.ive tryed ooads and now im starting to loose my cool.Thanks if you can help.I bet it's really easy to do,but im not seing it clearly.

On your Mac.
Sign into iCloud, turn Contacts and anything else you want, on.

How to transfer sales bom from SAP R/3 to APO?

Similar Messages

Maybe you are looking for