How to Transport development object in SAP BI

Hi to all,
Please can any body tell me , How to transport development object from one server to another server.
i am fresher in SAP Bi , so i need to know in depth , please also send me website link so i can get more depth knowledge.
Please also send step by step process for that.
i shall be thankfull to you for this.
Regards
Pavneet Rana

<Removed by Moderator>
You can surf through https://help.sap.com for referring the material or surf in SDN forums..where you can lots of info for getting in depth knowledge on this.
hope this is clear for you.
Regards
Ramsunder
Edited by: Pravender on Jun 8, 2010 6:41 PM

Similar Messages

How we transport developed objects from development server to qualityserver

Hi All,
pls send me navigational steps for transporting the objects.

Hi,
In transport connection in RSA1, you can capture the objects in various transport request's. Once you capture all the necessary objects, you can release these requests in SE09.
The sequence and logical grouping of the objects to be captured as follow...
Sequence No Objects in Request
1 Package(DEVC), InfoArea(AREA), Application Component(APCO)
2 Keyfigure Catalog(IOBC), Keyfigures(IOBJ), Units(IOBJ)
3 Characteristic Catalog(IOBC), Characteristic Infoobjects(IOBJ)
4 Infosources (ISCS, ISTD, ISMP, ISTS, ISFS, ROUT) and Generic Data Sources(DataSource Active Version(OSOA), ISMP, ISTS,DataSource Replica( ISFS) and Tables(TABL))
5 Infoproviders(ODS(ODSO), Cube(CUBE), Infoset(ISET))
6 Update Rules(UPDR, ROUT)
7 Infopackages(ISIP)
8 Queries(ELEM)
9 Webtemplates(TMPL, BLTM, BPTM)
Regards,
Yogesh

How to transport CU02 objects from one system to another?

Hi,
How to transport CU02 objects from one system (Development) to another (Quality)?

You need to set up the object dependency IDOC in the partner profile.Message type is KNOMAS. The transaction to send is CLD2.

How use Active X object in sap 2005A SP14

How use Active X object in sap 2005A SP14 with usercontrol in vb.net
or control in vb.net please show example code
Thanks for advance

Hi,
I try to use this sample too (C# version) but it does not work properly.
I got two different COMExeptions at line 75:
fTree = SBO_Application.Forms.AddEx( CP );
Message: Form - already exists.
and at line 114:
AcXTree.ClassID = "MSComctlLib.TreeCtrl.2";
ErrorCode=-2147417851
Ausnahme von HRESULT: 0x80010105 (RPC_E_SERVERFAULT)
I don't know the reason - but i am searching...
Edited by: David Kostenzer on Feb 20, 2008 4:48 PM

How to transport the object in XI?

Hi friends,
Anybody can give me the idea or any document for transporting the objects in XI from Development system to Quality system.As per my knowledge we can transport using File and CMS, but i don't have clear idea. Anybody explain me clearly or provide me any document?

Hi,
There are two ways to Transport XI objects-
1) File Import/Export
2) CMS
CMS is somewhat standard way to do. Becuase you can track the objects. But for this you need to install the CMS separately.
just go thru these quick links-
http://help.sap.com/saphelp_nw04/helpdata/en/e1/69a740aa053a13e10000000a155106/frameset.htm
/people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
Also check in service.sap.com- for how to guides-
https://websmp201.sap-ag.de/nw-howtoguides
Refer
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi - Transport in XI
Configuration of CMS in Central NWDI & SLD to transport XI objects
/people/praveen.mayalur/blog/2007/05/31/configuration-of-cms-in-central-nwdi-sld-to-transport-xi-objects
CMS Trnasport
How to Use CMS in XI 3.0.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
CMS based transport in XI
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
Change and Transport Lists for CMS Transports
How ToTransport XI Content Using CMS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
File Transport
Configuring Groups and Transport Targets.
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
also have a look at:
Transporting XI Objects
http://help.sap.com/saphelp_nw04/helpdata/en/93/a3a74046033913e10000000a155106/content.htm
Thanks
Swarup

How to create Development Class in SAP R/3 4.7c and Netweaver?

I follow some old notes on ABAP Development Class but I could not create a new Development Class. i.e. Stuck in creatinf a type group. Please give some details on how to create a development class. Thanks.
see the following stepa:
(A) Procedure for creating a type group:
/nse80
1. Object Navigator> select Development class>(Enter your development class
   yFTGxxDEV
2. Double click on development class object types.
3. Type Group: zPTAxx1.
4. Click on the Create button at the bottom (4th one from the left).
5. Enter short text: zPTAxx1 type group.
6. Save>Enter your development class> click on diskette button to save the type group
7. Select Source Code tab and enter the following:
"An example type-pool statement containing types and constants
type-pool zxx1. "zxx1 is a type pool. It is also known as a type group
types: zxx1_dollars(16)    type p decimals 2,
             zxx1_lira(16)          type p decimals 0.
constants:
       zxx1_warning_threshold type i value 5000,
       zxx1_amalgamation_date like sy-datum value '19970305'.
8. Select Type Group from menubar
           a) Check
           b) Save
           c) Activate
9. Click the back button or F3 to exit.
10, Show your type group to your teacher.
11. Go to ABAP editor and enter the following program:
"Calculations on date
report zxx_0914.
type-pools zxx1.                   "contains zxx1_amalgamation_date
data:    d1              like sy-datum,
            d2              like d1,
            num_days type p.
d1 = d2 = sy-datum.
subtract 1 from d1.
write / d1.                              "yesterday's date
d2+06 = '01'                         " first day of current months
subtract 1 from d2.
write / d2.                           " last day of previous month
num_days = sy-datum - zxx1_amalgamation_date.
write / num_days.                " number of days since amalgamation
11. Double click zxx1 from the type-pool statement to see the type group.
12. Follow lab1 procedure and run your program
(B) Run an ABAP program using field symbol ( i.e. pointer)
report zxx_lab6.
data f1(3) value   'ABC'.          "Step 1 Define a variable
field-symbols <f>.                     "Step 2 Define a pointer variable ( it only stores address)
assign f1 to <f>.                        "Step3 Initialize the pointer variable with an address
write <f>.                                    "Step4 Now you can use <f> in place of f1
write / f1.                                      " (same as write f1 )
<f> = 'xyz'.                                   " Assign a new value to f1
write <f>.
write / f1.

This is not the way to create a new development class.
Follow this steps to create a development class:
http://sap.mis.cmich.edu/abap4/knowbase/Create-Dev-Class.pdf
Regards,
Naimesh Patel

How to transport appraisal documents between SAP systems

Hi, HR experts!
I'd like to transport some appraisal documents - located, for example, in the transaction code PHAP_ADMIN - from the QAS SAP to the Production SAP and I don't know how to do that. Please, could you send me the required steps?
The release of our systems is ECC 6.0 and the level of the software component SAP_HR is 0058.
Thank you.
Regards,
Thiago Carvalho

there is no other solution , only report RHSOBJCH can be used
Report RHSOBJCH adjusts the transport objects PDST, PDST_LSO,..., that
are used to transport personnel planning objects. The transport objects
need to be adjusted, whenever a new infotype is delivered by SAP or
created in the customer system. We can't deliver the adjustment, because
the transport object contains both the SAP infotypes as well as the
customer infotypes.
Therefore you should select all entries in report RHSOBJCH and add them
to the transport object. This needs to be done after each upgrade and
after the creation of a customer infotype.
You should run the report both in source and target system BEFORE
transporting the appraisal templates.
When transporting PD objects to your productive environment
you should pay attention whether objects are involved in the transport,
which already exist in the productive system.
This is described under 5.a) in note 138411,

How to transport ALEAUD to non-SAP system?

Hello,
I have R/3 system which receives documents from non-SAP system. I want to transport acknowledgements from R/3 back to non-SAP system. I want to use standard SAP ALE monitoring possibility. All needed information exists in ALEAUD IDOC which can be generated by program RBDSTATE.
But I can not process ALEAUD IDOC in SAP XI because it always automatically converts to internal XI acknowledgement.
How to transport data from ALEAUD to non-SAP system?
Best regards,
Eugeny

Hi,
We had converted the Idoc to Zidoc for the same. Thats one way to do it.
Lets see if anyone has done it with the standard IDoc
Regards
Vijaya

How to transport proxy object abap part

Hi ,
I am working with one outbound proxy . The proxy was working fine in production ,now one requirement came in which we have to add one extra field to Proxy .field has been added in message type and proxy was generated in respective ABAP box
abap coding every thing was done and it worked fine in Dev . I transported the PI part ( DT,MT,MI and MM ) .
However I am not sure how to transport the ABAP proxy in ECC from dev to prod .
Can you kindly please tell me all steps I tried to search in SDN but getting confused in what object I have to transport and how from ECC .
Regards,
Saurabh

Hi Sarvesh ,
Thanks a lot for all your reply .
It partially worked as I created the transport with proxy object but not toatally as all my objects are not included in the transport .
when I am doublicking the My proxy interface and then going in used object TAB then I am able to see the structures .
Abap team wants to include these structure in the transport .
Actually the code has already been transported and it is throwing the dump value as it is unable to find the new field as the new strucutre is not transported .
Should I tell Abap team to manually make some random change in the str now and save them again so that when I re generate proxy then it will be added to transport.
Regards,
Saurabh

How to map development object with quality object

Hi
I have problem regarding to mapping development object with quality object i.e the development object will be order_dev and quality object will be order_ qa ..i have to map this two wat is the process..
thanku

You have an object in QA and not in Dev....you want to map this QA object with an object in Dev.....create a same object in DEV and then do the mapping....then transport.....you should have both the objects in both the environments.
When you say map...i assume it to be the mapping program (message/ XSLT/ JAVA)
Regards,
Abhishek.

How to create Individual Object in SAP CRM

Hi Experts,
Can some one please let me know the procedure to create Individual Objects in SAP CRM. I mean I want to know the function modules or classes to create Individual Objects.
My requirement is like this: I want to create an Individual Object first and then create an Installed base and assign the Individual Object to Installed base.
I need ABAP code to do the above tasks.
Thanks in advance.
Nadh.

Could you please share your solutions?
Thanks

How can transport XI object?

Hi Friends,
I wanted to transport the XI object like repository and directory to Q,P system?
Could an one help regarding this? I got stuck up.
regards
Mc

Hi,
Yes you can transport XI objects either by CMS or by file export.
You can goto Tools--> Export objects and it will be exported as .tpz file. And you can palce the same in the repository_server/import and directory_server/import directory and import it in your QA system
Thanks,
Prakash

How to transport deletion of a SAP Query

Hi
I have a SAP query which I deleted in the development system through SQ01. How do I transport this deletion to production ? Is this possible, or should we be deleting it directly in production system ?
Many thanks,
Sanker

I am interested in this question too.
The deletion is written to the standard BEx transport. Is it possible to collect the deleted queries and transport the deletion to production somehow?

How to Unlock the Object in SAP Solution Manager

Hi all,
Iam trying to Upload the TS into Solution manager, but the Project Documentation TAB is locked by another User.So i am unable to get ADD button enable
I dont have access to SM12 or SE03. How to Unlock this
Regards

This is not the right forum to ask your doubt. Post this in Solution Manager forum
SAP Solution Manager
Regards,
Prateek

How to transport MIME object in webdynpro ABAP from DEV TO QA

Hi,
I have enhaced a std WDA component.In this enhacement I have added one image as an mime object along with some other changes , all the changes have been moved from dev to qa except this mime object.
Infact I have deleted and reimported and re transported the mime object but still to failed this image from dev to qa.
Please provide me ur valuable inputs asap as this is high priority issue.
Pooja

By going into mime repository and then right clicking ont eh mimeobject and selecting write transport entry form the context menu
and creating a new request for the transport.
However i guess you must have followed this approach only.
by the way where is the mime stored. is it in the same standard comp folder.
store it somewhere else in some non=-standard comp or some public folder and then try to transport.
thanks
sarbjeet singh

How to Transport development object in SAP BI

Similar Messages

Maybe you are looking for