How to transport the text elements in Reports?

need answer to this question.
how to transport the text elements in the reports?
Edited by: venkata kumar on Feb 18, 2008 1:33 PM

Hi Venkata,
Text Elements are a component/part of the SAP script and are not individual ABAP objects within the SAP environment hence they cannot be transported independently.
You would need to make changes in your text elements in the SAP script which would result in the SAP script being saved under a transport and moving the transport across the landscape would result in the text elements also getting transported.
In short: Move SAP script - to move text elements.
Cheers,
Aditya

Similar Messages

How to transport the text elements

hi guru's,
i need answer to this question.
how to transport the text elements in the sap script?

Hi,
U mean Standard Text?
Standard Text can create using SO10.
Use RSTXTRAN Standard Program..
Do Like this..
Goto se38 and enter program name as RSTXTRAN
and press F8..
and give Text-key Name as Standard Text Name
then Press F8..
And select Select check box.. and enter
and press on trsfr to corr button..
it asks transfee textxs to a correction..
press on yes button..
it will show request number or create your own request...
and after goto SE10 tcode and Transport it...
Regards,
KK

Problem in transporting the text elements for user exit EXIT_SAPLV09A_002

Hi All,
I am facing a problem in transporting the text element (text symbol) for the exit EXIT_SAPLV09A_002. It is implemented and transported but the text elements are not transported and even if I try to delete them and then create them again, on activation it doesn't prompts for TO and it version its shows it as local object. I have tried to manually assign the TO by using limu as id of program and rept as type and SAPLXV09 as the name of the object but still it doesn't allows as an error message comes prompting local object cannot be assigned to TO. Kindly suggest solution this problem.
Regards,
Sachin
Edited by: Sachin Dangayach on Nov 15, 2010 4:21 PM

Hello ,
In the Quality after you run the report check in the layout option>display text elements> variables and check what value is displayed for the use exit variable , if it is correct then problem may be in the selection you gave when you run the report if the user exit variable value is wrong , then set a break point in the code and run the report from rsrt and check where the error is.
hope it is clear
assign points if useful

How to color the text elements in script?

how to color the text elements in script?
byeeeee
plz send the answers

Hi,
Please go through my blog to know how to do color printing in SAP scripts.
White Paper on 'Color Printing in SAP Scripts'
Regards,
Sireesha Ch

How to get the text elements for a particular program

Hi All,
I want to get the all text elements , selection texts for a particular program...How to get.
I have used one FM READ_TEXTELEMENT_FROM_REPORT , but not much useful..
please help me..
Regards,
raj

Hi..
You may use this statement to read the text elements:
DATA: i_reptx TYPE STANDARD TABLE OF textpool WITH HEADER LINE.
READ TEXTPOOL (reports) INTO i_reptx. " reports is the report name.
Best Regards,
Pradeep.

How to active the text element (F9) in manu bar

Hi Expart,
I am working with sap Script when i select the window in page window ,then try to insert text by edit->text element , but this option is deactivated.
Can any one help me to inset text to those window ..
Thanks in advance ,
Tarak

hi,
after creating a new page you have to goto page windows. Otherwise you caonnot create textelements.
There also must also made aready some windows. In no windows exist you have to go to windows.
hope this helps.
Gr., Frank.
PS. Try to work with the graphical form painter. Then you will not have those problems.

How to color the text element in selection screen

hi,
i am going to pass some text element in selection screen output and my requiremnt is text element should be given some colour.
plz guide me.
regards
muthuraman.d

Hi...
Dont Declare your field as OBLIGATORY.
Instead perform the validation in AT SELECTION-SCREEN event. But validation should be only when Particular Radiobutton is selected.
And Generate only Error Message (Type E).
Try this code:
AT SELECTION-SCREEN on <yOUR mandatory field>.
   IF PA_UPD = 'X'.
         IF <YOUR MANDATORY FIELD> IS INITIAL.
              Message 'Entry is must in this field' type 'E'.
         ENDIF.
   ENDIF.
AT SELECTION-SCREEN OUTPUT.
IF pa_udp = 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'ABC'. "#CCE
screen-active = 1.
ELSEIF screen-group1 = 'DEF'.
screen-input = 0.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ELSEIF pa_rep = 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'ABC'. "#CCE
screen-input = 0.
ELSEIF screen-group1 = 'DEF'.
screen-active = 1.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
<b>Reward if Helpful</b>

Problem transporting the text element translated into Korean language

Hi guys,
I have created a new data element for the program and make a Korean translation for the new data element.
However, upon transport only the new data element in English language is transported to the QA box, the Korean translation was not.
Did I miss something in my transport request? Or have I done something worng?
Thanks a lot!
Regards,
Mark

Hi Mark,
You need to create the separate transport for the translations which SAP will create for you once you do all the steps as I told.
Once you give all the details as told, just press EDIT button by choosing correct language.
Regards,
Atish
Edited by: Atish Sarda on May 29, 2008 12:32 PM

Error in Assignment of Text Elements of Report to Transport

Hi All,
I have transported few reports to Quality system however the texts elements associated with those reports have not transported to Quality system .
Now I am trying to assign these text elements to new Transport however I am getting error while activation and messgae just displays " Error in Activation " .
The Original system of these reports is different from my current development system. The Transport Layer of Package and Transport is same.
Please advice . Thanks.

Hi,
Try to transport the text-elements along with the report to the quality server. Save and activate the text-elements and the report in the same transport request and then transport to quality system.
Regards,
Vik

Manipulate the browser elements in report page....

Hi,
How to manipulate the browser elements in report page? i.e hiding the field element, hiding entire row, disable or enable a particular cell(or text field) from a row, hiding value in a cell....so on.
i used apex_items to create a report text fields.
I tried to manipulate fields using javascript API's, i cant get to...
how to do this?
Thanks....

ok,
I would like to order:
first row: label1 spacer texfield1 spacer label2 texfield2 label3 spacer label3...
secod row: label4 spa.....similarly
I use a af:panelformLayout with rows 2 and maxColumns 3, but no orders....

How to find out all the text elements in the report using Java?

How to trace the contents of an rpt file?
I am able to open the rpt file in my report viewer but can not trace it using the JAVA code.
Actually, I need to find out all the text elements of rpt (Report) file and replace them with the contents of resource bundle.
My Java code to open a report is given below:
import com.crystaldecisions.reports.sdk.ISubreportClientDocument;
import com.crystaldecisions.reports.sdk.ParameterFieldController;
import com.crystaldecisions.reports.sdk.ReportClientDocument;
import com.crystaldecisions.sdk.occa.report.data.ConnectionInfo;
import com.crystaldecisions.sdk.occa.report.data.ConnectionInfos;
import com.crystaldecisions.sdk.occa.report.data.Fields;
import com.crystaldecisions.sdk.occa.report.data.IConnectionInfo;
import com.crystaldecisions.sdk.occa.report.data.ParameterField;
import com.crystaldecisions.sdk.occa.report.data.ParameterFieldDiscreteValue;
import com.crystaldecisions.sdk.occa.report.data.Values;
import com.crystaldecisions.sdk.occa.report.lib.IStrings;
import com.crystaldecisions.sdk.occa.report.lib.PropertyBag;
import com.crystaldecisions.sdk.occa.report.lib.PropertyBagHelper;
import com.crystaldecisions.sdk.occa.report.lib.ReportSDKException;
import com.crystaldecisions.sdk.occa.report.reportsource.IReportSource;
public String viewRpt()
               //1.) Setting Database Infos
                        IConnectionInfo iConnectionInfoObj=setDatabaseConnectionInfos();
               //2.) Setting Report Path
               String reportPath=u201DE:
was60
rptFilesLocation
u201D;
               reportPath=(reportPath!=null)?                                             reportPath:AppConstants.CONSTANTS.BLANK;
               String reportName="report1.rpt";
               String reportFullPath = reportPath +   rptName;
             //3.) Setting Report Source
                         ReportClientDocument reportClientDoc = new ReportClientDocument();
                                          reportClientDoc.open(reportPath, 0);
              IReportSource reportSource = reportClientDoc.getReportSource();
              setReportSource(reportSource);
              reportClientDoc.close();
          //4.) Setting the Fields Starts
          setFieldsCrystal(null);
          Fields fields = new Fields();
          ParameterField pfield1 = new ParameterField();
          Values vals1 = new Values();
          ParameterFieldDiscreteValue pfieldDV1 = new ParameterFieldDiscreteValue();
          pfield1.setName("@parameter1");
          pfieldDV1.setValue(u201Cvalue1u201D);
          vals1.add(pfieldDV1);
          pfield1.setCurrentValues(vals1);
          fields.add(pfield1);
          pfield1 = new ParameterField();
          vals1 = new Values();
          pfieldDV1 = new ParameterFieldDiscreteValue();
          pfield1.setName("@parameter2");
          pfieldDV1.setValue(u201Cvalue2u201D);
          vals1.add(pfieldDV1);
          pfield1.setCurrentValues(vals1);
          fields.add(pfield1);
          setFieldsCrystal(fields);
          //Setting the Fields Ends
The sample jsp code to view the report is as follows:
<%@taglib uri="http://www.businessobjects.com/jsf/crystalreportsviewers"
     prefix="bocrv"%>
<bocrv:reportPageViewer viewerName="CrystalViewer"
                                             reportSource="#{CrystalReportBeanObject.reportSource}"
                                             displayToolbarRefreshButton="false"
                                             allowDatabaseLogonPrompting="false"
                                             allowParameterPrompting="false"
                                             databaseLogonInfos="#{CrystalReportBeanObject.connectionInfosCrystal}"
                                             parameterFields="#{CrystalReportBeanObject.fieldsCrystal}"
                                             displayGroupTree="false" displayToolbarLogo="false"
                                             displayToolbarToggleTreeButton="false"
                                             enablePageToGrow="false" height="540"
                                             zoomPercentage="100" width="750"
                                             allowDrillDown="false"
                                             displayToolbarPrintButton="true"
                                             printMode="PDF"
                                             ></bocrv:reportPageViewer>
Edited by: JayKumarSharma on Mar 23, 2011 12:42 PM

This is how you retrieve all the text fields in the reort:
ReportObjects reportObjects = (ITextObject) oReportClientDocument.getReportDefController().getReportObjectController().getReportObjectsByKind(ReportObjectKind.text);
for(int i=0; i< reportObjects.size();i++)
ITextObject textObject = (ITextObject)reportObjects.get(i);
// use ReportObjectController to modify the text object.
If you want to modify the contents of the text element, you can do it as follows:
TextObject oTextObject = new TextObject();
Paragraphs oParagraphs = new Paragraphs();
Paragraph oParagraph = new Paragraph();
ParagraphElements oParagraphElements = new ParagraphElements();
ParagraphTextElement oParagraphTextElement = new ParagraphTextElement();
oParagraphTextElement.setText("This is the new text field");
oParagraphTextElement.setKind(ParagraphElementKind.text);
oReportClientDocument.getReportDefController().getReportObjectController().modify(textObject, oTextObject);
oReportClientDocument.save();

How to include variable in the text column in report painter?

Dear Expert,
Would like to seek for your help to include How to include variable in the text column in report painter?Please advice.
Thank you.
Regards,
Karen
Edited by: Karen Swee Ping Ho on Jun 17, 2011 2:48 AM

Hi,
Thank you for the promt reply.
1) How I include the variable in the column header to display fiscal year which I have selected from the selection screen?
which variable should i use?
2) Where can i find more information about the characteristic and which variable to be use base on the characteristic?
For example: I would like to display the fiscal year from the selection screen/input screen when execute the report which also will reflected to the element definition and will display the fiscal year also in the column text?
3) Kindly advise base on question 2, the variable that i use in element definition it will also display in selection screen?
4) When execute the report the first selection screen input parameter it obtain from where it is from element definition?
5) Please advice how to be done when report execute with first screen input selection will also reflect the element definition of column and rom with the selection of the fiscal year?
Please help.
many thanks
Edited by: KH on Jun 18, 2011 7:18 AM

How to transport the BW query's variable to BO webi report

Hi all
I'd like to know how to transport the BW query's variable to BO 's webi . today ,I created a sap customer varible in my bw system to get the max calmonth in the active table.The varible in the BW side run's well ,but I use this query to build a new univers ,and created a new webi report base on this univers ,but the question is the webi report can't get the varible's value I wann to know how to transport the bw varible value to BO webi report
Thanks and regards,
Peter .zhu

I have changed my variaable in my bw query ,I found if you use SAP default variable it is ok in BO side . So I get a guidline by SAP default variable ,I changed my customer variable in variables edite ,don't use 'ready for input' .And then the variable can be useful in BO side .
Edited by: peter zhu on Jun 16, 2008 11:43 AM

How to display the text as a Bold in the Text Element of a Smart Form

Hi,
I created one Smart Form.
In that i created the Text element.
I provide some data also in that.
It is coming as a MS WORD.
I executed my smart form.
Customer Number: &WA_KNA1-KUNNR&
it display the data of the particular customer.
But i need to display the Customer Number as BOLD or else Increase the Size.
For this also I created one SMARTSTYLE.
In that I created the Paragraph and Character Formats also.
Now i assignee that SMARTSTYLE in the Output Option Tab of the Text Element also.
But i unable to get the CUSTOMER NUMBER in Bold.
In MS WORD we have BOLD button.
I selected the Text and Press the BOLD button. At that time it is Highlighted.
Whenever i press the SAVE Button.
Then it is not saved with BOLD.
It is coming in Normal Format.
In the ECC 6.0. I am unable to get the Text as a BOLD.
This text Element is like a MS WORD.
Can you please tell me how to display the Data with BOLD. please tell me. I am unable to get that one.
Thank You.
Regards,
B. Krishna.

Hi,
Check where u have given BOLD. In character Format or in Paragraph format.
In SMART FORM,
1. Change to OLD EDITOR if u are confused with the new one.
        (This can be done by clicking the button left to new editor ).
2. If it is PARAGRAPH FORMAT,
           Give the name of paragraph format in the editor.
            P1         &WA_KNA1-KUNNR&
    If it is CHARACTER FORMAT,
                         <C1> &WA_KNA1-KUNNR&
Thanks,
Nithya.

How to Remove Blank spaces in the text elements for a smartform

Hi All,
Can any one please help me out to remove the blank spaces in the text elements.
We are printing Labels using the Zebra Printer and we have rotated the windows to 90 degrees.
We are able to see out text and barcodes. But the issues is when we are printing the label. We are getting spaces in the Text and in the Text elements fields. I have tried to give &g_name(C)&. But it is not working even i worked with style sheet spaces no luck.
Currently out text and fields are printing like this
s h r i y a n
material number
1111 -001 -000
They should print like
shriyan
1111-001-000
According to the ZEBRA suggestions we are using the font helve.
Plase help us it is very urgent.
Reward point will be given.
Thanks

Hi,
Just use Condense g_name inside the program lines.
Just to see how it behaves put a hard breakpoint.
Break Username. and check the condense statement.
condense <your field> no-gaps.
Create program lines ahead of printing. give the field you want to condense in the input and output parameters of the program lines.
Use condense inside the program lines.
Thanks,
Vamshi.

How to transport the text elements in Reports?

Similar Messages

Maybe you are looking for