How to trap (interrupt) signal from JVM

How to capture (interrupt) signal from JVM in case of JVM termination due to Error/RuntimeException in shell script (Unix/Linux OS). Is it possible?
I am executing an java class from shell script. In cetain condition it throws RuntinmeException.
I want to capture the signal from terminating JVM in case of the RuntimeException.
How to acheive this ? Can any one solve this problem ?

Using the POSIX signal java program , We can trap the JVM signals.
Addition info
Use sun.misc.SignalHandler - interface
and MEthod sun.misc.Signal.handle( new sun.misc.Signal(signalName), this );

Similar Messages

  • How LabVIEW get interrupt signal from microcontroller

    I try to write a LabVIEW program to test PC Oscilloscope using microcontroller and parallel port.
    The program will triger the microcontroller and wait for the interrupt signal from the microcontroller.
    Then read the data and show the display.
    I defined my ECP port as bi-directional and IRQ enable.
    The problem I faced in here is how to get interrupt service in LabVIEW 5.1 without DAQ board.
    My computer's IRQ is 07 and I would like to control interrupt service by using parallel port.
    Thanks in advanced.
    Best Regards,

    I was very interested looking for possible answers to your question - no feedback from other people - o.k.
    I think, that I have some experience with LabVIEW and
    the use of printerport on different operating systems (Win9x,WinNT,W2k). But I would solve your problem with
    polling of that "filtered" bit on printerport. If some- body has a better idea - let me know. If you have questions about interfacing @ printerport - please write to: [email protected]

  • How to remove a certificate from JVM keystore ?

    I want to remove a certificate from JVM cacerts.
    I know its alias is quacert and password is quadra
    How do I remove this cert from JVM cacerts ?
    Whats the correct flag need to use with keytool to remove a certificate by its alias name ?

    sabre150 wrote:
    Err ... does 'keytool -h' not tell you how to do this?There is no "keytool -h"
    I find this though ..
    [email protected]:~$ keytool -h
    Illegal option: -h
    Try keytool -help
    [email protected]:~$ keytool -help
    keytool usage:
    -delete [-v] [-protected] -alias <alias>
    [-keystore <keystore>] [-storepass <storepass>]
    [-storetype <storetype>] [-providername <name>]
    [-providerclass <provider_class_name> [-providerarg <arg>]] ...
    [-providerpath <pathlist>]
    I think I need these ...
    [-storepass <storepass>]
    [-keystore <keystore>]
    What is square bracket and nested angular bracket doing here ? I dont understand this notation. How do I put values for this type of notation ?

  • How would i acquire signals from a philips viridia patient monitor?

    i'm looking for a simple way to acquire patient vital sign trend data
    (BP, pulse, etc) from our Philips Viridia patient monitors in the ER.
    How can I capture these signals using biobench?

    You can use a software application called MECIFView.  It uses the MECIF protocol to acquire these signals from certain patient monitors (such as the Viridia).  You can download a demo version at 

  • How do I get signal from my Roland Fantom G8 to Logic Studio or GarageBand?

    My computer recently crashed, and since then I have not been able to record any music into either Logic Studio or GarageBand.  I need to get back up and running ASAP, as I'm in the middle of recording music for 5 different projects.  Here's all the gear that I have:
    -1 Roland Fantom G8
    -1 iMac with Logic Studio and GarageBand
    -1 M-Audio Fast Track Ultra
    -2 Rokit KRK Monitors
    -1 USB cable
    -1 midi cable
    -2 1/4-inch cables
    -2 1/4-in to XLR cables
    The 2 1/4-inch cables run from Balanced Outputs 1 and 2 on the back on the Fantom G8 into Inputs 1 and 2 on the back of the Fast Track Ultra.  The 2 1/4-inch to XLR cables run from the back of the 2 KRK monitors into Outputs 1 and 2 on the back of the Fast Track Ultra.  The Fast Track Ultra is powered via USB cable that runs into a USB port on the back of my iMac.  The midi cable runs from the "Computer" port on the back of the Fantom G8 into a USB port on the back of my iMac.  This is the exact set-up I had before my computer crashed, and I was able to record just fine.  When I open up the audio preferences on either Logic Studio or GarageBand now, it recognizes the Fast Track Ultra; however, it does not recognize the Fantom G8.  What I'm trying to do is get signal from my Fantom G8 into both Logic Studio and GarageBand.  I also want that sound to then project through my KRK monitors.  I also want to be able to record audio and midi.  Please help me!!!

    I used the Fantom for several years and did exactly what you want to do. I simply plugged my Fantom into a channel on my mixer, in your case the 003. I ran a firewire out of my mixer (Presonus Studio Live) into my computer using Logic Pro X. Then I just assigned that incoming channel to a channel strip in Logic. As an example I used stero channel 9/10 on my mixer, (plugged in the Fantom here). Then the signal went via my mixer firewire to computer running Logic. I assigned my channel strip input to channel 9/10.
    Does this make sense?
    I just sold my Fantom last week and purchased a new Yamaha Motif XF8. Now I am trying to figure out the same thing on it.

  • How do I add signals from different modules to the same waveform chart?

    When using build array to connect signals from different FP modules to the same waveform chart, the array type is not the same as if all the signals come from one Read Array. Only one digital indicator on the chart displays with the build array method. Why

    Hi gencell,
    There are two ways to plot multiple plots on a Waveform Chart, a 2D array and a cluster of doubles or integers. I would suggest that you use a Bundle to create a cluster.
    This information is in the Context Help of the Waveform Chart terminal (from the Block Diagram).
    Chad Evans

  • How to get a signal from the serial port to start a labview program?

    I need to synchronize the data obtained from a program (which is not in Labview)with the data collected with Labview on a different computer. I can send some data strings to the serial port of the computer running the Labview program when the other program starts. However, I need to be able to read the trigger in my Labview program. Do you know what I should do? Thanks.

    If you don't have any other programs listening on the COM port, you need to let a LV program run BEFORE the signal comes, otherwise you won't be able to read it. You can have the program wait in a slow timed loop so that it doesn't use up too much CPU time, and when the required "trigger" comes, to move into the main part of the program.
    You basically need a while loop waiting for a certain string in the serial buffer. Once the string is found the while loop is exited, and the data acqquisition or whatever else you require from the progam can be performed.
    In the example attached the program wait for ANY text to be sent to the COM port. Please note that you need to configure the VISA resource before using it. Once there is something at the COM port, the loop will exit and the rest of the program will be executed.
    Hope this helps
    Using LV 6.1 and 8.2.1 on W2k (SP4) and WXP (SP2)
    Wait for serisl ‏17 KB

  • How do I input signal from turntable to convert LPs to CD?

    Like many of you, probably, I have a collection of LPs I want to digitize and store on my MacBook/iPhone/iPod and/or transfer to CD. Does Apple have a simple method for doing this?
    Many thanks!

    Quite a lot of info is on the net about this topic. In short:
    Your LP player - if you normally need to play it through your stereo, you are probably using Phono inputs on your stereo. This is needed to amplify the stylus/cartridge and provide the RIAA phono equalization. Then I would take a line level signal out of the stereo, such as TAPE OUT, or Preamp Out, and connect that directly to the Mac input.
    It is possible you have a turntable with built-in preamplification and RIAA eq, in which case, it would have Line Outputs and could be directly connected to the Mac. It is also possible to have a turntable with a USB digital connection, which is another matter.
    On the Mac, you must select the line input with the System Preferences/Sound/input window.
    Audacity is fine for recording and editing the LPs into digital files. Use 16 bit, 44.1 kHz digitization. iTunes can be used to make CDs from these files, but options and caveats abound. You do not need to buy Toast to record and make CDs, but many people like it.

  • How do I get signal from Digital Optical input (Extigy) to the Creative PlayCent

    How can I rip MP3's from the Digital Optical input on the Extigy? The PlayCenter does not seem to have any interest in the Extigy/USB as an input source. Thank you for your help!!?

    Since you are talking about variables, I suppose that you are using CP4, right?
    There is a fine tutorial in de CP4-help, chapter 'Variables and advanced actions', 'Tutorial on scripting' which explains more elaborately what I will try here:
    Create a user variable, p.e. named 'vName'  (Project, Actions, sheet Variables)
    Ask the user to enter his name in a Text Entry Box; in the properties of this TEB, sheet Advanced you indicate that this name should be put in your variable 'vName'
    Wherever you want to show this name, create a Text Caption and insert your variable by the button 'Insert variable'; this button is present in the properties window and also in the formatting toolbar if you are editing in place (look for X and and arrow); the variable in the text caption will show as '$$vName$$' and in the published SWF you will see the username.
    Hope this could help you, but please check the tutorial.

  • How to speedup receiving signal from Oscilloscope

    hello every one. 
    i have a TEK Oscilloscope(TDS 2012C) and i wnat to analyse signale in labview  that i receive from Oscilloscope. i do it, but it shows in labview so slow with delay. i want to receive signals like Oscilloscope lcd! 
    please help me.
    Tektronix TDS 200 1000 2000 Series Acquire Continuous ‏30 KB

    samle of signal
    F0000TEK.jpg ‏30 KB

  • How to broadcast Wifi Signal from MBP when using AT&T mobile card.

    I have a Macbook Pro and access the internet via an AT&T wireless modem card (USB Quicksilver). Is there a way to broadcast a Wifi signal so that I can get internet on my new iTouch ?
    Thanks for any help !!

    Yah, Seattle: I see what you are talking about: when you try to enable share, the message is "you haven't enabled a port to share", and the only offer is ethernet? I do share my wireless AT&T AirCard. Are you sharing with a PC, or more Macs, on Airport? It took me a while, when I first enabled the share on Airport. From System preferences > Internet and Network > Sharing, there is no joy. First go to Network Preferences: enable Airport; whatever it takes; Network name you self-assign. Now when you go to SysPref > Sharing > and check Internet Sharing, you get another scolding: "You cannot share 'cause no ports; or share from Airport to computes using ..." Go to Network Preferences > Airport > Network Name > Create Network, or if the other computer is up and around, > Join Network. Mine werke,s but it was ugly getting it up to a PC wireless ... I got it almost there and then had to go 128 bit encryption password etc to make the (corporate) PC happy. This is not plug and play ... Keep trying and take notes and post back.

  • How can I acquire signal from the 2 counters on my 6034e board?

    I want to record one analog signal and one counter/timer signal with Diadem 8. I have a 6034e board. AI is not a problem, but when I define a counter in Diadem, for one of the two counters of the board, I get no or strange readings.

    In MAX, I can only test one feature: pulse counts. So I connect a TTL signal between the source and the digital ground, and it counts a random number, of around 20-30 pulses, for each trigger. Same in Diadem. When I try period measurement (connected at the gate) or others with Diadem, I don't get anything.
    I believe my wiring is correct as I'm used to counters with the PC-TIO-10 c/t board.

  • How to trap Cleared document from the Flat file

    Hi All,
    In the BDC In flat file, I am getting boths Document No ( Cleared & Non Cleared).
    While Uploading I need to check the Document No , which is clered is filtered & Only Those Document No which is not cleared is posted in the Transaction - F-53.
    I need to captured those Cleared Document No and  should appeared  as in the list.
    Pls suggest me the logic . there is no FI consultant
    Thanks in Advance

    Hi Uri Dimant,
    I tried to load data from text file to SQL table but i am getting belows errors.
    Also format of data is
    Errors -
    [OLE DB Destination [31]] Error: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
    An OLE DB record is available.  Source: "Microsoft SQL Server Native Client 11.0" 
    Hresult: 0x80004005  Description: "Invalid character value for cast specification".
    OLE DB Destination [31]] Error: There was an error with OLE DB
    Destination.Inputs[OLE DB Destination Input]
    DB Destination Input].
    value could not be converted because of a potential loss of data.".
    The "OLE DB Destination.Inputs[OLE DB Destination Input]" failed because error code 0xC0209077 occurred,
    and the error row disposition on "OLE
    DB Destination Input]" specifies failure on error.
    An error occurred on the specified object of the specified component.  There may be error messages posted before this with more information about the failure.
    [SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. 
    The ProcessInput method on component "OLE
    (31) failed with error code 0xC0209029 while processing input "OLEDBDestinationInput"
    The identified component returned an error from the ProcessInput method.
    The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
    There may be error messages posted before this with more information about the failure.
    Please mark as answer if helpful

  • How to fix the signal with the microphone to the computer when recording through an interface? every time i record and play back i get poor signal and a lot of fuzz

    How to fix the signal from the microphone to the computer when recording through an interface in logic pro? Every time i record and playback i get poor signal and a lot of fuzz.. how can i fix this problem?

    Which model computer?
    What operating system?

  • How to read and display a signal from my a miccrontroller (MCB1700) onto labview connected via a CAN port on a PXI machine

    How do you read and display a signal from my a miccrontroller (MCB1700) onto labview connected via a CAN port on a PXI machine?
    I tried using a DAQ Assistant but the CAN port is not included as one of the supported physical channels even though all its drivers are upto date.
    Please help..
    Go to Solution.

    Attached herewith is a print screen of what is showing on MAX
    The CAN ports are on NI PXI-8461
    Hopefully that clarrifies something.
    Untitled.png ‏212 KB
    Untitled.png ‏212 KB

Maybe you are looking for