How to trigger Camera usinf IEEE1394

Dear Readers,
I am writing a code to trigger the camera externally.
i am using the sony fire wire camera model no: XCD-X710CR. It has two input connectors. one is for the cable from PXI express which we uses IEEE1394, The another one is for Ext trigger.
I wrote a Vi to snap an image through labview. I added Externall trigger.vi immediately after Initiation.vi. In that code, whenever i set the trigger mode in "disabled" condition, i got the snap from camera. When i set the trigger mode as Mode0, Mode1 etc. i got an error message as "Timeout"
I dont know to resolve this...... How to set the capturing time? I need some little more information regarding timing calculation etc....
I connected the cable to ext trigger and checked with Osciloscope. I am getting an output voltage of 4V dc when the camera is not taking pictures(idle mode).
Once i powered ON to take the pictures thro Maesurement and automation explorer am getting the result of oscillating voltage of 0-4V from trigger output poiint.
I need to give the external trigger pulse to capture the image for my application. Whenever i apply the pulse of some varyiing voltage the camera have to capture the image that time. I need to program this concept in labVIEW.....
I came to know whenever we write the vi accordingly, the internal oscillator gets reset and it allows the user to send trigger pulse externally.
How to reset the internal oscilator of the camera?
How to write the code in vi to complete this application?
Moreover i have 100pin Digital I/O board. I need to give the Ext trigger pulse throgh I/O board. How to do that?
i need some quality people's help to solve this problem....
I attacehd the vi which i developed for this application.
Guide me in this regard.
Thanks in advance
Regards,
Deepak
Attachments:
Snap_Ext_trigger.vi ‏46 KB

Hi,
I am attaching a document which has details about acquiring from FireWire cameras, triggering etc. Please read the document. You might find the solution to your problem.
Please revert if you have any further queries.
Krishna Prasad
Attachments:
NI-Tutorial-2977.pdf ‏1061 KB

Similar Messages

DAQmx : How to Trigger camera and AOTF

Dear,
I have a camera sCMOS and an AOTF that i want to trigger.
I have attached the description of the camera acquisition sequence.
I want to sent a digital pulse (only one pulse because I want to acquire one picture only) to the camera via the EXT/SW Trigger input of the camera and get the FIRE output of the camera which will trigger the AO lines connected to the AOTF. I have a NI PCI 6733 with 8 AO and 8 Digital line
I am very new in DAQmx and I do not know how to proceed. Please help me. The best should be, if it is not to much, to send the correponding vi to me.
Thanks by advance
mnemo15
Attachments:
External-SoftwareTrigger.PNG ‏11 KB

Hi Mnemo15,
Thank you for posting on NI's forum
Which model is your camera and how is it linked to your computeur ?
I think you can use daqmx example with Software Triggering (in the help menu of LabVIEW).
You can set a digital pulse and use it as a trigger to acquire a picture (by wiring this pulse to the daqmx triggering vi).
Then when you got your picture, you can start your AOTF by using the Fire output signal of your camera as a trigger.
I hope I understood each step of what you want to do.
Regards,
Vincent.O
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Été de LabVIEW 2014
12 présentations en ligne, du 30 juin au 18 juillet

BODS 3.1 : How to trigger an email alert for the jobs on BODS server ?

Hi All.
I have this request.
BODS 3.1 : How to trigger an email alert for the jobs on BODS server ?
We have jobs scheduled on BODS running smoothly and absolutely fine.
But to check, i am logging into the admin console and check for the jobs status.
I would like to have an email to be received from BODS after each job is finished.
It could succuessful. Or it could fail.
Whatsoever, i wish to receive an email alert as soon as a job is finished.
Can anyone advise me as to whether this could be made possible.
And if yes, how this could be done.
Thanks for your help in advance.
In BOE CMC / for webi / schedule / we find an option to send email for a job success or a job failure.
Is there any option similar to that in BODS ?
Also would like to know :
how to use the smtp_to or mail_to functions ?
how to set up the smtp server for this ?
thanks
REgards
indu
Edited by: Indumathy Narayanan on May 31, 2011 3:47 PM

Hi.
Since am new to this BODS. I need some help.
I already have many jobs which are running absolutely fine.
And when a job runs, and finishes, am able to see the trace saying
e.g. :
Job_abc is completed successfully.
We got the smtp service activated for our test server.
and we hae a group email id.
I have put the details of the smtp server / ip address / and said apply restarted.
The i created a simple test script as below :
print (' Before email ' );
smtp_to('abc@company_name.com', 'Job ' || job_name() ||' on ' || host_name() || ' has FAILED',
' the job has failed', 0, 0);
print('After Email ');
It does send a email to as per smtp_to whatever email is specified.
But how to differentiate between a job success
And a job which has failed.
I wish to have a mail which says on the subject :
'Job ' || job_name() ||' on ' || host_name() || ' has completed successfully'
==> IF it is a success
OR
'Job ' || job_name() ||' on ' || host_name() || ' has failed'
==> if it has failed
How to make the system identify, whether
to send a success message or a error message whatever
Could anyone advise.
thanks
indu

How to trigger New page while using ALV with classes/oops?

Hi All
I am trying to print a report which has to show the data in two pages.
I am using ALV with classes/oops.
Though I am able to print the report but a new page is not coming. Whole of the data is coming in one single page.
Please tell me as to how to trigger a NEW PAGE while using ALV with classes/oops.
Please send some code samples also if available.
Thanks in advance.
Jerry

using sort option you can do it. in case of grid/oo alv class ALV you can view that only in print mode/preview mode.
in case of list you can view that directly.
sort-fieldname = 'FIELDNAME'.
sort-group = '*' "triggers new page
sort-up = 'X'.
append sort to it_sort.

How to trigger crystal report from SAP ECC

Hi All,
I hope i m right forum to ask this question.
we want to do label printing from Crystal reports. data will be present in SAP ECC .
So I below issues
1 ) how to connect SAP ECC database with Crystal Reports.
2 ) how to trigger print output in Crystal reports from ECC , lets say I create a Delivery In ECC , the print output will be issued to Crystal report and I should get a print out Immediately ( for printing - printer will be connected to local system and SAP network printer ) .
I have worked with this type of scenario in smarforms , adobeforms. but not with Crystal Reports ...
Regards
Yashpal Gupta.

Hi Yashpal,
First thing you need to do is install the Connector on both your work station where you run Crystal Reports as well as the SAP Server where the data is.
So I moved your post to the SAP Integration Kit forum.
Need to know what version of Crystal Reports you are using?
Search of browse here, lots of info on how to...
Thanks
Don

How to Trigger an IDOC from SAP R/3 to two systems at a time

Hi experts,
Can any one please tell me How to Trigger an IDOC from SAP R/3 to two XI systems at a time.
My current production R/3 system sends a DELVRY03 IDOC to Production XI system ( Name : XIP) .
I would like to route the same IDOC from production R/3 system to my Quality XI System ( Name XIQ) .
Problem is production R/3 system triggers an IDOC once. We need to write a logic to route the same to two different systems
Can any one tell me how can we do that ?
Regards
Ram.

Hello Ram,
Do you have connectivity between your production & XIQ?
What does "connectivity" mean?
1. RFC destination is maintained.
2. Port defined for the RFC destination.
If no, create these. (Search in SDN for details).
If yes, proceed:
1. Define the logical system for XIQ.(BD54)
2. Define the same as your partner profile. (WE20). Add the message type SYNCH with the port for XIQ.(This is imp)
3. Create a distribution model view with sender as "your production" & receiver as XIQ.
3.1. Add the messages which you want to distribute.
3.2 Generate Partner profiles.
No coding is reqd. for this.
BR,
Suhas

How to trigger standard task manually in Process controlled workflow?

Hi All,
I would like to trigger a task mannually in BRF, process controlled workflow. My requirement is to send an approval notification to the approvers at the current approval level, at any instance by the requestor of the shopping cart. In that case, will it be possible to trigger the standard task 40007953 (SRM Shopping Cart Approval (1)) with the workitem of Shopping cart under consideration?
I have tried searching for the same in SDN and other forums but most of the information was regarding application controlled workflows. None of those function modules seems to be working in PCW.
Any pointers on how to trigger a standard task (using FM or code) in BRF(process controlled workflow) environment is also highly appreciated.
Thanks,
S.H@ri

Hi,
Use this FM [SAP_WAPI_START_WORKFLOW|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/bb9100f8-0c01-0010-ac8e-e017351f3fc1].
Regards,
Surjith

How to trigger creation of collective orders

Hi,
How to trigger the creation of Collective orders.
regards

Hi,
Collective Orders
Use
In a collective order, planned orders or production orders are linked to one another over several production levels. Each order in the collective order has its own order number. If subassemblies are produced directly for superior orders within a production process, without physically entering the warehouse, it is useful to have a representation via collective orders.
The components for which separate production orders are created in the collective order are called directly produced components (see Creating Collective Orders)
Prerequisites
A collective order cannot be created for components that have one of the following indicators set:
· Co-product
· By-product
· Alternative item with strategy 2
· Alternative item with usage probability 0
· Discontinued
· Follow-up material
· Intra material
Features
Collective orders offer the following advantages:
· Integrated view of a production process
Collective orders make it possible to represent different levels of the production process together in the system. The production process can be viewed as an integrated whole.
· Separate order number for every order
Every level in a collective order represents a separate production order/planned order. Every production order/planned order has its own order number. This enables you to process the entire collective order, a subtree in the collective order or an individual order.
· No placements in storage or removals from storage between production levels
Within a collective order stock movements only take place for the leading order (that is, the order that is at the highest production level) and not for directly produced components. This makes it easier to maintain the collective order in comparison with several individual orders. A further advantage is a more realistic representation of the costs of the production process, since subordinate orders can be directly assigned and settled to superior orders.
· Business functions simultaneously for several orders
Certain business transactions can be carried out simultaneously for several orders. Releasing an order that belongs to a collective order has the effect that all the hierarchically subordinate orders are released simultaneously.
· Automatic change to dependent orders
Changes to an order automatically affect dependent orders / components affecting orders. For example, if you change the order quantity in an order then
¡ the relevant quantity changes are automatically made to dependent orders
¡ the requirements quantity of the directly produced component is automatically changed.
In the collective order, you also have the option of manufacturing directly produced material in a different plant to the planning plant.
· Set status in leading order
If you make changes in subordinate orders that have an affect on the status, then the system sets the corresponding status in the order header of the leading order in the collective order as follows:
u2013 CFCO Confirmation in collective order
u2013 GMCO Goods movements in collective order
u2013 RLNE Release taken place in network
In this way you are informed about changes in the whole collective order.
· Reading master data
You can copy the routing data and BOM data to the order again. You can find more information in Read master data.
Example
You want to produce a pump. The BOM for the pump contains a pressure regulating valve and a spiral casing. You want to enter these two components in separate production orders, but you do not want them to be posted to stock.
You set the special procurement type to direct production in the material master record for the pressure regulating valve and the spiral casing, so that production occurs using a collective order.
When you create a production order for the pump, a collective order is automatically created, which contains subordinate production orders for the pressure regulating valve and the spiral casing.
Creation of Collective Orders
Use
Collective orders are only created if the special procurement type is set to direct production in the components for which the separate production orders are to be created (materials planning area in the material master).
In the standard system, 52 is the special procurement type for direct production (that is, for components that are produced within a collective order).
To create a collective order, you must use an order type with internal number assignment.
Hope this helps.
Regards,
Tejas

How to Trigger an IDOC from SAP R/3 to two XI systems

Hi experts,
Can any one please tell me How to Trigger an IDOC from SAP R/3 to two XI systems at a time.
My current production R/3 system sends a DELCERY01 IDOC to Production XI system ( Name : XIP) .
I would like to route the same IDOC from production R/3 system to my Quality XI System ( Name XIQ) .
Problem is production R/3 system triggers an IDOC once.
Regards
Ram.

Hi Ravi,
Thank you very much for your answer.
As I am not completely aware of R/3 side,I am getting little problem in understanding your answer.
Could you please explain the same in some what beter way.. Thank you ..

How to open Camera Raw in Bridge, it comes up with the following error

How to open Camera Raw in Bridge, it comes up with the following error Bridge parent application is not Active   Bridge requires that a qualifing product has been lanched at least once to enable this feature. It opens in Photoshop CS6 & Elements 10 but not Bridge?

You need to look at all programs in your uninstall list, and see if you spot any old trials that are no longer active.
Camera Raw in Bridge and PS are the same program, so its not the program but access. Would have been nice it you had stated OS, but here are locatons of camera raw for both OS.
Win           Users/[user name]/AppData/Roaming/Adobe/Adobe Photoshop CS5/Adobe Photoshop CS5 Settings    note: appdata a hidden file.
Mac          Users/[user name]/Library/Preferences

How to get Camera RAW / Photoshop CS5 to work with Canon 100D?

How to get Camera RAW / Photoshop CS5 to work with Canon 100D? I don't want to by this product again and again...

In what way is ACR not working in Bridge? Is there no right-click Open in Camera Raw available from Bridge, or there is, but the ACR version is less than ACR 6.7.1 or what exactly is the issue?
Also, if you open Photoshop and do Help / About Plug-ins / Camera Raw, is ACR missing from the list, or if not, what version does it say is installed?
You might also want to describe what methods you have tried to correct the issue, since saying you've tried what you've seen posted and they didn't work, isn't really much to go on.

How to Update Camera Raw 5.0 to Camera Raw 5.6 for Photoshop CS4

How to Update Camera Raw 5.o to Camera Raw 5.6 for Photoshop CS4?
I can access the the download button but after I depress it
I need specific step by step instructions from start to finish
Morty
[email protected]

It would help us if you told us what operating system and version you are using.
generic instructions
Windows
1. Right click on the downloaded Camera_Raw_5_7_updater.zip
    Click on Extract All
2. In the Extract All dialog check Show extracted files when complete, then click on Extract
3. When the next window opens showing the extracted files, right click on the Setup.exe and click on Run as Administrator.
   In the User Account Control dialog click Yes
Just follow the directions in the install dialog when it opens
Mac
1. Double click on the downloaded Camera_Raw_5_updater.dmg to mount the dmg image
2. When the next window opens, double click on the Setup.app
    In the next window enter your password
Just follow the instructions in the install dialog that appears
I didn't take screenshots of the installer dialogs, because i already have the 5.7 camera raw plugin installed

How to instal camera raw in mac

Hi, I'd be obliged if someone could advise me how to instal camera raw 8 into an imac.
many thanks

If you have Photoshop CS6 or higher, you already have Adobe Camera Raw 8. What you want is to update ACR to version 8.6. You can do that automatically through the Help > Updates menu item.
If you have a lower version of Photoshop, you cannot run any version of ACR 8.x.
If you don't have Photoshop at all, then you need to buy it first.
For the next time you post, please give explicit, detailed information:
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them, etc.,
someone may be able to help you (not necessarily this poster).
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

How to trigger FI Standard Workflows

Hi,
I have never worked on FI Standard Workflows . As far as I knpow there is a std WF available WS00400012 with Object type BSEG. For Vendor Down Payment Request, Vendor Payment Request Against Invoice, Vendor Down Payment Posting,Vendor Payment Posting, Vendor Invoice FI, Vendor Invoice Logistics Posting, Vendor Credit Memo, Vendor Debit Memo, Cash Payments, Asset Posting what are the Standard Workflows available and how to trigger these workflows. I have checked with SWELS but WS00400012 is not getting triggered. Is there any SPRO config required for this, POlease help me out with the solution.
THanks
Edited by: Saujanya GN on Sep 16, 2008 8:23 AM

Hello Munish,
As Venugopal has mentioned, you have to find the relevant BTE for the process and use it to raise an event and in turn trigger the workflow.
The following is the process to find a BTE and implementing it.
(1)Goto transction FIBF .Execute it with Attribute type = 'A' and then menu Environment->Info System (P/S ).
Choose the relevant BTE using the descriptions provided.
(2)Select the BTE you want to implement.
(3)Press button Sample function module
(4)This brings you to SE37 - Copy the sample function module to a Z-function module (First create a new function group for the function module) . Note: The name of the Z-functionmodule is not important
(5)Edit the code in the new function module
(6)Go back to transaction FIBF - Menu Settings->Products -> Of a customer and create a new product whicj identifies the new product . Remember to mark the Active field.
(7)Go back to FIBF menu Settings->P/S function modules->of a customer - Create an entry that links the BTE and Product with the new function module
Hope this will help.
Regards,
Samson

How to trigger a workflow using generic object services?

Hi Experts,
Let me know on how to trigger a workflow using generic object services.
My requirement is to trigger the FI document reversal document using Object services.
Any info or docs relevant to this, please share with me..
Thanks,
Dinesh.

Dinesh,
First of you need to check if the transaction has a BO (in released status) published to use the GOS.
These are the pre-requisites for GOS
http://help.sap.com/saphelp_46c/helpdata/en/94/aa532cddd511d289860000e8216438/content.htm
Once done.. check that you have valid workflow linkages active for this BO.
Now when you click on the 'start workflow' the system will show all relevant workflows for the BO to choose from and to start.

How to trigger Camera usinf IEEE1394

Similar Messages

Maybe you are looking for