How to Turn Long DV video into Smaller Clips to Edit

Hi everyone, I've googled and fiddled around for hours trying to figure out how to splice up my rather long DV file (converted over from a home wedding DVD) to begin editting. I've tried creating markers and then subclipping - but that doesn't seem to work. Nothing happens. Is there an easy way to do this?
How I've been doing it:
Create new project. Then import the DV file. There appears in the browser the 'sequence1' and then the DV file. I grab it into the viewer and then drag it also into the timeline. However, I get a red bar, so I render it. After this, the the canvas displays the timeline video but the viewer video is completely separate. They still play the same DV but not simultaneously. I don't know how to go about clipping this large file so that I can edit each scene separately. How do I splice this long segment into smaller clips that show up in my browser for editting?
Thank you so much for your help!!

Well... I'd suggest you either reconvert that file to a dv codec .mov file, or start again with the dvd file conversion.
You've got to forget everything you knew about imovie. FCP and imovie are built on completely different paradigms. Final cut is a non-destructive editor. No matter WHAT you do in FCP, the actual media clip remains unchanged, just like your father's face a week after you tell him you wrecked the family car.
After you've got your correct .mov file, import it into fcp. Open it in the viewer. Play down until you find the first part you want to use. Press "I" for an in point, play down until you want it to end, then press "O" for out. Then press command U, or go to the modify menu and select Make Subclip.
You'll get a little jagged media icon in your browser window. It makes good sense to name it something more than what fcp names it., so you'll be able to find it again.
I personally don't like to work with subclips. Usually I'll capture in logical chunks. But you can't do that with your one long file. What I do instead of subclipping is to add my select shots into a sequence. Then I'll duplicate the sequence and start working with that- rearranging, deleting etc, until I'm happy.
Hope this is useful.

Similar Messages

How can I divide a video into separate clips?

I need to take video that I have been given and divide it into ten second intervals in order to collect data from each clip (for behavioral analysis and research). I know nothing about using video editing software but if I can learn how to do it right I will have a new job, so I really am motivated to learn!
Thanks in advance,
Sandi

Maybe you dont have to :divide" it. (eg cut it up into ten second clips.)
Maybe a running clock super imposed onthe footage will be a better way for your goal.
We can tell you how to do either...but you do need the basics * edit and application fundamentals) before starting anything.
Dont be daunted at the start. Its easier than it looks

Split long video into small 15 second clips

Hi, I have a long video (7 minutes) I would like to upload to Instagram. Since they only takes 15 second clip, I would like to split my video into small clips. How can do it easily with iMovie?
Thanks,
fireman

First, you may not need to spit the event clips at all. You can select short bits of the long event clip and drag it into your project as you wish.
Having said that, there are good reasons to split event clips. For example, the 75 minute movie may contain many logical events that you wish to split out by date. In this case, iMovie 11 can do it, but I would not recommend it. It is a slow process and is prone to error.
I would recomment that you use a free app called MPEG Streamclip from Squared Five (google it).
To use MPEG Streamclip, drag your long clip into MPEG Streamclip.
Then, move the cursor to the "in" point of the clip, and press i. Move the cursor to the "Out" point of the clip, and press o. Then, FILE/EXPORT TO QUICKTIME (or FILE/EXPORT TO DV if it is DV). Then repeat until you have done this for all clips you want.
If you know the date and or time of the footage, name your file
clip-yyyy-mm-dd hh;mm;ss
(let mpeg streamclip provide the extension). This will provide metadata that iMovie will use to put the event in the right year and month.
When finished splitting your long clip, import into iMovie by using FILE/IMPORT...MOVIE

Need to split long movie into many clips to edit video

I upgraded to iMovie 11 from iMovie HD 6...it was a long wait to get audio and video editing that was at least as good as HD 6. We had some 40 year old Super 8 movies digitized and used HD 6 to split them into clips so I could edit parts that were almost black, or some almost totally blown out. I realized that this could probably be done better with 11, so purchased it, but couldn't import the HD 6 clips. Was told I had to export the whole movie as a single clip, then import into 11 and break them apart again to edit.
While I was proficient in HD 6 enough to produce some good stuff, iMovie 11 is befuddling to me, which is a surprise since I do fine with the latest iPhoto, which uses similar terms and processes. I have ordered David Pogue's book; while waiting for it to arrive, my main question is: how do I split this 75 minute movie into multiple clips for editing purposes? Apparently splitting can only be done in the project library, and apparently 11 will only let you split into 2 or 3 clips???
Thanks for any help.

First, you may not need to spit the event clips at all. You can select short bits of the long event clip and drag it into your project as you wish.
Having said that, there are good reasons to split event clips. For example, the 75 minute movie may contain many logical events that you wish to split out by date. In this case, iMovie 11 can do it, but I would not recommend it. It is a slow process and is prone to error.
I would recomment that you use a free app called MPEG Streamclip from Squared Five (google it).
To use MPEG Streamclip, drag your long clip into MPEG Streamclip.
Then, move the cursor to the "in" point of the clip, and press i. Move the cursor to the "Out" point of the clip, and press o. Then, FILE/EXPORT TO QUICKTIME (or FILE/EXPORT TO DV if it is DV). Then repeat until you have done this for all clips you want.
If you know the date and or time of the footage, name your file
clip-yyyy-mm-dd hh;mm;ss
(let mpeg streamclip provide the extension). This will provide metadata that iMovie will use to put the event in the right year and month.
When finished splitting your long clip, import into iMovie by using FILE/IMPORT...MOVIE

How can I convert DVD- video into Apple's format so that it can be played and streamed from my Mac?

How can I convert DVD- video into Apple's format so that I can play the content on my Mac and also stream it to my Apple TV? A few years ago, I transferred all of my home videos onto DVD but now would really like to put these onto my Mac and stream them through Apple TV to watch on the "big screen". Any advice would be most welcome!! Thanks

MPEG Streamclip.
Apple do not have their "own" format. You need to convert your DVDs to H.264 though.

I want to know how to turn a word document into a jpeg so I can put the document on Facebook as a picture. I have made posters and if I do a print screen they are unable to be read, or if i turn it into a PDF there is no save as jpeg??

I want to know how to turn a word document into a jpeg so I can put the document on Facebook as a picture. I have made posters and if I do a print screen they are unable to be read, or if i turn it into a PDF there is no save as jpeg??

iOS device backups are stored in your iTunes library.
Move your iTunes library to an external drive.

Panasonic P2HD how do i get the video into Final Cut Express.

I have a Panasonic P2HD video camrea how do i get the video into FCE.

You can't. FCE doesn't support DVCPRO HD. You'd have to convert it to the Apple Intermedia Codec in some other sofware. FCE also probably doesn't support the frame resolution the P2 media is using.

I have a few videos in shared content...unfortunately not locally...not in icloud..how can I download those videos into my ipad

When I click on photos
I can see "shared"
I have a few videos in shared content...unfortunately not locally...not in icloud..how can I download those videos into my ipad

Those are the videos I have taken using my iPad
Then later posted from my iPad
they are now visible in "shared"
later I think I cleared the iCloud backup
Now they are not in iPad(local) and they are not in iCloud(remote)
bvut I can see those videos in "shared"
what is shared?
when you clock on "photos" you will see three things at the bottom of the screen
"Photos" "shared" "Albums"
My videos are in "shared" I want to down load them locally into my iPad
Hope this explains...
many thanks

TS3355 I loaded video from an external hard drive to my desktop. How do I import the video into iMovie 09? I tried "Import Camera Archive". Didn't work.

I loaded video from an external hard drive to my desktop. How do I import the video into iMovie 09? I tried "Import Camera Archive". Didn't work.

It depends on the type of video. iMovie will only import video that it can edit.
In general, you would use FILE/IMPORT MOVIE...

Imovie09 copies videos but doesn't import. how can I import my videos into imovie?

imovie09 copies videos but doesn't import. how can I import my videos into imovie?

Can you tell us what you actually mean by "iMovie09 copies videos but doesn't import"?
If you have got your video into iMovie then it has imported it.Are you able to see your video in the Event Browser?

Hello. i have a 57 min mts video that i'd like to cut into several short videos. simple, probably. how do i separate this video into sections?

hello. i have a 57 min mts video that i'd like to cut into several short videos. simple, probably. how do i separate this video into sections?

Press F1 and type in Subclips.

How To Automatically Split A Large Clip Into Smaller Clips

I captured several one-hour tapes with an older version of Windows Movie Maker.
They are AVI files.
I'd like to work with the footage when I purchase Premiere Pro CS5.5 or CS6.
Each tape is composed of several starts and stops of the record button, so lots of individual clips inside of the hour-long captured footage.
In Premiere Pro CS 5.5, is there a way to automatically split a large clip into smaller clips at the points where I started and stopped the camera?
Any help is greatly appreciated.

Flyingfish,
I cannot tell you that.
Historically, with "consumer" CODEC's, PrE often gets native support, before PrPro.
However, with "professional" CODEC's, such as RED, PrPro has those, but PrE will likely never get them. There are some pro CODEC's, that PrPro does have, that PrE is missing, but I do not have a list.
Good luck, and wish that I had more info for you.
Hunt

Seperate video into multiple clips

So, I have a bunch of interviews that I imported in one large batch from my video camera. However, I want to seperate each interview into its own clip. How do I go about cutting the video into seperate clips?

FCP does not automatically break long captures into individual clip files. With DV media, it will do a thing called 'sub clipping'. These are pointers to a section of the larger clip that allow you to treat each element like an individual clip. This works ok except when you want to: a) work with variable speed time remaps and b) delete unused clips to archive the project.
If you want individual clip files you have two reasonable options.
1. Log each clip then do a batch capture to bring in individual files
2. Use a 3rd party application (eg CatDV) to break up the clips into individual editable files. This can happen at capture or at a later time.
Have fun.
x

How can i detach the video from a clip so i can only use the audio when using imovie?

how can i detach the video from a clip so i can only use the audio when using imovie?

First, go to iMovie/Preferences and enable the Advanced Tools.
Import the video clip into an iMovie Event. When you get ready to use it in an iMovie Project, select the clip in the Event and drag & drop it on top of a video or photo clip in the project at the place where you want it to begin. When the pop-up menu appears, choose Audio Only.

Splitting large video into smaller segments

Is there a way to split a large iMovie Captured event into smaller segments/clips.
Am attempting to convert my home videos ( Analog: 8mm) into iMovie clips.
Used a ADS Pyro that converts my composite signal ( RCA: Yellow+Red/White) to a digital signal via Firewire using the iMovie capture. However, this creates a single 2 hour file that takes approx 26Gb because there is now DV information.
I would like to (a) Break this into smaller segments/clips then (b) Change the date on these.

Download MPEG Streamclip, which is free, from Squared 5.
Drag your long clip into MPEG Streamclip.
To split your video, move the playhead to your desired in point and type i. Then move the playhead to your desired out point and type o. Then File/Export to DV.
For more tips, [see this post|http://discussions.apple.com/thread.jspa?threadID=2255575], especially numbers 9b and 9c

How to Turn Long DV video into Smaller Clips to Edit

Similar Messages

Maybe you are looking for