How to unhide "Truck" icon in SC Status screen?

Could someone show me the steps to unhide the "Truck" icon in the SC Status screen? I don't know which method my former colleague used to hide the icon (screen variant or HTML template), but now I need to unhide it so we can do confirmation from this screen. I'm not familiar with either method and I now have to hunt for it and unhide it.
Many thanks.
SN

Hi SN,
Go to internet service 'BBPSEARCH'
In this service go to html template 'SAPLBBP_PDH_SEARCH 4001' and search for term 'Auto CF'. Check whether this is commented, if so uncomment it and you will be able to see the truck icon in the SC status search screen.
Let me know this was helpful.
Reward points for useful answer.
Regards,
Andy

Similar Messages

  • How to disable the print icon on check status screen of shopping cart inSRM

    Hi Experts,
    I have a requirment in which I need to disable print Icon on the status screen of the shopping cart.
    Can anybody please let me know how to achive this requirement.
    Thanks,
    Arun K Singarapu

    Hi Here you go some useful code for the requirement.
    wafunc = 'BWD'.
          APPEND wafunc TO functab.
          wafunc = 'FWD'.
          APPEND wafunc TO functab.
          wafunc = 'DIS'.
          APPEND wafunc TO functab.
          wafunc = 'COP'.
          APPEND wafunc TO functab.
          wafunc = 'IGN'.
          APPEND wafunc TO functab.
          wafunc = 'SAVE'.
          APPEND wafunc TO functab.
          wafunc = 'HIS'.
          APPEND wafunc TO functab.
          wafunc = 'CONTACT'.
          APPEND wafunc TO functab.
         SET PF-STATUS 'OBJECT_SEL' EXCLUDING functab.
    Bala.M

  • How can I hide icon from my home screen?

    How can I hide icon from my home screen?

    Hi pearlyxiel,
    If you have apps on your Home Screen that you don't use regularly and would like out of the way, you may want to create a folder for them and move them to a later screen. You can either do this from iTunes or directly on your iPhone, as outlined in the following articles:
    Arrange apps on your iPhone - Apple Support
    iTunes 12 for Mac: Sync and organize iOS apps
    Random,
    - Brenden

  • How to Remove the Icon from the OWL Screen

    Hi All,
    Can we remove the Icon from the OWL screen for some fields without removing the Hyperlink as in the standard for Opportunity for Account Fields as shown below:
    As in the above OWL screen, i have to remove the highlighted Icon.
    Thanks & Regards,
    Malkit Singh

    Hi Malkit,
    You can check Icon in Thing Type like COD_Account__TT screen.
    Once you are in TT screen just go to "Controller" and select "Thing Type Data" from left side pan.
    But how to remove it I don't have any idea.
    Regards,
    Mithun

  • How to unhide an icon/application from the menu??!!

    i hid one of my applications and have to search for it everytime i want to access it, how do i unhide it???
    Solved!
    Go to Solution.

    If you've hidden it, press the Menu key > Show all.
    You'll find the ghosted icon and scroll to it > Press menu > Unhide
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HT4515 how to delete an icon on the home screen for iphone 4s

    How can I delete an icon on home screen?

    Hi kim,
    Press down on any icon and hold until they all begin to wiggle. If the icon you want gone has a little black "x" in the upper left-hand corner, you can click on that, and it will delete the app and the icon. If it does not have the "x", then it is a base app, and it cannot be deleted.
    However, it can be moved to the very last screen. Press on the icon and hold until they all start to wiggle, then with your finger still on the icon you want to move slide it to the right. It will continue to go from screen to screen until you reach the last one. If you want to drop it on any screen in between, then just let go when you want it to drop.
    Press the Home button once to stop the icons from wiggling.
    Cheers,
    GB

  • Does anyone know how to add an icon to the Home Screen that sends an email instead of going to a website?

    That is, using a mailto: URL instead of an http: URL? It can be done for phone numbers using a tel: URL, but I haven't seen any email examples.

    Im seeing the same thing.
    You can take a screenshot or copy/paste the email into Notes and then  print from there.
    If you want to see the feature added or leave any type of feedback for the iPad or anything Apple related, you can do it here -> Apple - Feedback

  • I need to get an icon on the selection screen as well as selection text .

    HI ,
           Can anybody please tell me how to get an icon in the selection-screen along with the selection texts written for select-options or parameters.
    For Example:
                        Select-Options: S_WERKS  For  T001w-werks,
                                                S_AUART   For  TVAKT-AUART,
                                                S_ERDAT   For  LIKP-ERDAT.
    IN THE SELECTION TEXTS: 
                     FOR S_WERKS  i write (WareHouse)
                     FOR S_AUART   i write (OrderType)
                     FOR S_ERDAT  i write  (PlantDate)
              I need to get the icons for this fields as well as selection texts written for these fields.
    I will reward full points to the solution.
    Mohan.

    Hi mohan,
    <b>Run the below code</b>
    Report zex33.
    tables : t001w,
             tvakt,
             likp.
    type-pools: icon.
    selection-screen begin of line.
    selection-screen comment 1(20) text_001.
    select-options: S_WERKS For T001w-werks.
    selection-screen end of line.
    selection-screen begin of line.
    selection-screen comment 1(20) text_002.
    select-options :S_AUART For TVAKT-AUART.
    selection-screen end of line.
    selection-screen begin of line.
    selection-screen comment 1(20) text_003.
    select-options : S_ERDAT For LIKP-ERDAT.
    selection-screen end of line.
    initialization.
      write ICON_WAREHOUSE  as icon to text_001.
      concatenate text_001 text-001 into text_001 separated by space.
      write ICON_ORDER  as icon to text_002.
      concatenate text_002 text-002 into text_002 separated by space.
      write ICON_PLANT  as icon to text_003.
      concatenate text_003 text-003 into text_003 separated by space.
    *In text-001 -> Warehouse
    *In text-002 -> Order Type
    *In text-003 -> Plant Date

  • Transports status "Import Running" truck icon

    Folks
    I am using TMS_TP_IMPORT. The import queue status is always "Import is running"...but when I click on the Job logs.....it says successful.
    How do get rid of this "Import is running" error in STMS

    go to STMS, double click on the SID
    Then GOTO>>IMPORT MONITOR
    u will see truck icon there
    Right click on it and say delete entry
    If this does not solve the problem,  than make sure no import is running in the system, then delete enteries from
    trbat, trjob, TMSTLOCKP, TMSTLOCKR and last few enteries from tpstat

  • How do I add  "little icons" to my status bar on iPad 2?

    How do I add those  "little icons" to my status bar in iPad 2?

    What little icons might you be talking about? If you are asking about the thumbnail views in Safari, there is nothing that you can do to change the way that Safari works on the iPad. Safari now uses tabs.
    If that's not what you are asking about, please provide some details.
    EDIT - OK. I get it now .....
    Message was edited by: Demo

  • Hi.. IOS 6..1.1 is downloaded in my ipad 3.. then i clicked to install. ipad restarted with an apple icon and a status bar. but there is no update for almost 2 hours. please let me know how to proceed further

    Hi.. IOS 6..1.1 is downloaded in my ipad 3.. then i clicked to install. ipad restarted with an apple icon and a status bar. but there is no update for almost 2 hours. please let me know how to proceed further

    Hold down on the home and power buttons at the same time until the iPad shuts down and the Apple logo appears again.
    You might need to connect to a PC running iTunes to restore if the update got corrupted and can't complete

  • :-)   How to schedule the TMS Job ? ( I don't have the "orange truck" icon)

    Hi All,
    In the STMS txn, I'd like to shedule the TMS import job, but :
    1- I'don't have the truck icon.
    2- On which environement do u shedule it ( source or target ? )
    Thx a lot,
    Erwan

    Hai,
    Check the below link to enable/disable Import all option in STMS.
    http://www.sap-img.com/bc002.htm
    http://help.sap.com/saphelp_sm32/helpdata/en/5c/d21880fe3c11d2b461006094b9ea64/frameset.htm
    Regards,
    Yoganand.V

  • Unable to Import Transport Request - hanged with Truck icon

    Dear SAP Expert,
    Our DEV & QAS are on normal domain installation but Production installation is on HA Cluster on Windows.
    We have configured the STMS for the CRM landscape system and domain is Development server.  While trying to import all the Transport Request, it is getting hanged and showing in import running status (showing Truck icon). 
    We have checked some possible logs and reviewed the complete STMS configuration, profiles and process and found the BG job RDDIMPDP is not getting scheduled continuously. 
    The below error is from latest log file u201CSLOG1151.PCRu201D from F:\usr\sap\trans\log (global directory) from Production server for your review
    WARNING: System PCR. Warning.        20111220144048 :
    ERROR:       The following call returned with exit code 7:
    ERROR:         sapevt.exe SAP_TRIGGER_RDDIMPDP -t name=PCR pf=
    VSAPPRDCRMSCS\sapmnt\PIS\SYS\profile\DEFAULT.PFL
    ERROR:       Background jobs cannot be started.
    ERROR:       Please check trace file dev_evt.
    WARNING:       (This warning is harmless if no further warnings follow.)
    I would request, please help me for resolving this issue immediately as our GO-LIVE date is nearby and have to import all the TRs from CRM QAS to this PRD servers.
    Kindly let me know, if you need any further information.
    Thanking you,
    Devki Nandan

    Hi,
    This forum is for SAP application called as 'SAP Transportation Management'. Your query is irrelevant to this forum. Please look for an appropriate forum to post your query.
    Regards,
    Nageshwara Manda

  • How to create the ICONS and SYMBOLS

    how to create the ICONS and SYMBOLS
    Title was edited by:
            Alvaro Tejada Galindo

    HI,
    Check this sample code....Not mine...
    REPORT SHOW_ICONS.
    TABLES: ICON.
    INCLUDE <ICON>.
    FIELD-SYMBOLS: <F>.
    SELECT * FROM ICON.
       ASSIGN (ICON-NAME) TO <F>.
       WRITE:   /(5) <F>, 20 '@',21 ICON-ID+1(2),23 '@',ICON-OLENG,
                ICON-BUTTON,ICON-STATUS,ICON-MESSAGE,ICON-FUNCTION,
                ICON-NAME.
    ENDSELECT.
    Also Try this,
    INCLUDE <symbol>.
    INCLUDE <icon>.
    Write:/ 'Phone Symbol:', SYM_PHONE AS SYMBOL.
    SKIP.
    WRITE: / 'Alarm Icon: ', icon_alarm AS ICON.
    For more information check out the following link it will help you.
    http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9e4a35c111d1829f0000e829fbfe/content.htm
    Regards,
    Padmam.

  • [SOLVED]Gnome: No network icon in the status bar

    So fresh install and no networking icon in the status bar.
    I also opened the network connections program and it didnt show any connections. I am using eth0 to write this.
    This suggests to me that a daemon hasnt been started (but doesnt necessarily explain no icon in status bar)
    here is the daemon section of my rc.conf
    DAEMONS=(hwclock syslog-ng network netfs crond networkmanager dbus gdm)
    i added network manager as a previous attempt (on advise of someone elsewhere on the internet(cannot remember where lol))
    Thanks.. I have nearly got my system how I want it (minus software i havent installed yet)
    Sorry if i have created a duplicate thread
    Last edited by olig1905 (2012-01-21 17:33:47)

    Thanks to both of you.
    I had already noticed the redundancy of network which was added in the install however hadnt considered the ordering
    wonder wrote:Did you really read the wiki?
    This is pretty much all i have seen people saying at the end of their posts on here. I agree with the point you have made, however i have been on the wiki all day, conisdering this is a newbie forum it is to be presumed that it is a pretty new installation. Therefore the user does not have time to read the entire wiki. As i said i have been on the wiki all day and used it countless times and have found it invaluable, so im only posting here when i am unable to find answers there.
    That aside this is a wonderfully helpful community so HI

Maybe you are looking for

  • Thinkpad keys once and for all

    There are lots of people out there having problems to get thinkpad keys to work. I would like to solve this issue and potencially write a wiki page about that. Here is the information I got till today: 1. the ibm-acpi module is renamed to thinkpad-ac

  • Page cannot be displayed' error when 2 events (FireAction and GO) fired

    We have created a framework page where FireAction event will be executed when the value of a calendar item is modified. When we modify the value and leave the cursor in the field (without tabbing out), and click GO button, 'Page cannot be displayed'

  • Confuse which ipsw need i download?

    Hello..i want to know. Which ipsw 7.1 i should download for my iphone 5s A1530. is it gsm? cdma? or gsm+cdma?

  • Cannot send mail smtp failed

    I am being connected to my Personal Hotspot.I want to reply to an email from the iphone but unable to.  Here is the message: The connection to the outgoing server "smtp.xxxxxxxx.com" failed. Please help.

  • Data fetching anomalities

    Ctrl+A fetches all rows and there is no way to cancel it. I was lucky that this was just a development database (some 60K records vs 20M in production). Old habits die hard, and I'm used to selecting all fetched data with Ctrl+A. :) Also - shouldn't