How to update data in database from different region of the same page

Hi,
I have pepared two regions of tabular form based on the same table,each region is selecting different columns of the same table.
I want to update the values from different regions in the database using single submit button.
Regards
Shashi

I presume that the two regions are working fine with their individual buttons and your issue is how to make them both save with one button.
Here is how
a. You will have 2 ApplyMRU and 1 ApplyMRD processes for each of the regions. Right? Lets say you have 2 "Save" (i.e. label=Save) buttons, one has name SUBMIT and the other SAVE ( SUBMIT and SAVE being the requests that will be sent when they are clicked , respectively)
b. Make the Display condition on one of the buttons 'Never'. Now it won't show when you run the page. Lets say you made SAVE's conditional Display 'Never'
c. Go and change the condition on all ApplyMRU and ApplyMRD processes from "When Button Pressed" to "Request is contains in Expression1". In Expression1 enter SUBMIT,SAVERegards

Similar Messages

  • How do I view multiple images from different projects at the same time?

    Hello
    I've been trying to find the answer in the user manual, but no luck so far.
    I did find how to open 2 projects at once, but I can only see one image at a time in the viewer and I have to keep going back and forth between projects to compare images. (These are scans of old photos and I want to eliminate the ones that are poorer quality, so need to compare numerous images from 2 sets of scans)
    How can I view an image from one project at the same time as an image from another? I know that it can be done in the same project by apple-clicking the second, third etc image, but this doesn't work if the images are from different projects.
    Thank you
    Elizabeth

    Thank you again Tony
    I've now created an album, independent of the projects, and dragged test images into it and it does just the job I needed. Now i just need to keep my brain sorted with which ones are which while i'm working
    Elizabeth

  • How to make a link in a report open a Form in a different region of the same page ?

    Hi,
    I developped a report and a form for the same table. I also created a link and used it in my report so that when I click on the link of one record, the form is opened and display this record.
    My problem is that when I include my report as a portlet and I click on a link, the form is opened in full screen mode by replacing the page containing my report.
    What should I do in order to open this form in another region of the same page ?
    Thanks a lot

    I presume that the two regions are working fine with their individual buttons and your issue is how to make them both save with one button.
    Here is how
    a. You will have 2 ApplyMRU and 1 ApplyMRD processes for each of the regions. Right? Lets say you have 2 "Save" (i.e. label=Save) buttons, one has name SUBMIT and the other SAVE ( SUBMIT and SAVE being the requests that will be sent when they are clicked , respectively)
    b. Make the Display condition on one of the buttons 'Never'. Now it won't show when you run the page. Lets say you made SAVE's conditional Display 'Never'
    c. Go and change the condition on all ApplyMRU and ApplyMRD processes from "When Button Pressed" to "Request is contains in Expression1". In Expression1 enter SUBMIT,SAVERegards

  • How to update 2 datagrids in 2 different app at the same time?

    I'm very new to flex/flash builder and my question is: first I have to explain how the applications works. The first applications have a form for a customer to fill and datagrid to show the results.The data is send using PHP to a database in the server. The second application have a datagrid for the admin  that show the data that the first application send. Now, when  the data is inserted in the database, the first application dataGrid show the result soon as the records are inserted in the database, but the second application show the records after I refresh the Browser. The second aplication have a delete button to clear records from the database as is obious, the firstt database needs to be refreshed in order to see if the record has been deleted. So what I need is that both applications update as soon as the database is altered.If anyone have a suggestion I appreciate very much thanks in advance.

    Then, the time interval should be implemented in both applications since the first one inserts data and the second one delete the data. Instead of doing time interval I eliminate the second app and make 'states' in the first app for the 'add' and 'delete' data so I was able to open two instances of the app, one using the add state and the other with the delete state thinking that since was the same application both update at the same time but unfortunately I was wrong and one needs the browser refresh anyway. I really not know how to do time interval in flex since is different to flash that you just do the interval for the next frame and back to the first to load the data since is a timeline based app, flex not, besides, I'm just start using flex a couple weeks ago and don't know much about the coding  but I will keep researching to do that. Thanks for the advice and sorry to take so long to answer.

  • Spreadsheet: how can I store test results from different tests in the same central spreadsheet?

    I am looking to gather test data using LabVIEW. I then want to store all the data in the same spreadsheet, a kind of central data base. I know how to store single test data in a spreadsheet but I can I get the software to write new data in the same file without over writing the old data?

    My first recommendation is that if you need a database--use a database not a spreadsheet. A DBMS isn't that hard to use and could pay big dividends in the future.In any case, to answer your question directly, it sounds like you are writing tab-delimited data to a text file that you will then open with a spreadsheet program. On the file write vi is a boolean input that specifies whether the new data should be appended or overwrite the existing data (the default is to overwrite). Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • How to update data into database from mx datagrid?

    Hello,
         I am developing a native application. I have connected my application using HttpServices i.e. remote objects to spring mvc 2.5 application. I have done inserting and deleting data from database. Now I want to update the records from datagrid itself. I am new to AIR please suggesst me something useful.
         Thanks in advance..

    Likely you're querying only one selected value from the request using HttpServletRequest#getParameter() instead of an array of selected values using HttpServletRequest#getParameterValues().

  • How do I roll up tasks from different sites in the same collection into one task list that can be overlayed onto a calendar or a timeline?

    I am working on how to make an aggragate list that I would like to overlay to a calendar, or add to a timeline.  There are more than 20 different project sites that have task lists.  I created a custom content type for a task list that adds the
    column "Major Milestone."  I would like to take all tasks that are marked as Major Milestone and have them be displayed on a calendar or timeline on the parent site that sums up all of the Major Milestones in the child sites.
    How should I go about doing this? ... and thanks in advance!

    Thank you for your responce. I used a content query wp to rollup only the Major Milestones, but am unable to overlay the results to a calendar.. The link you provided is for overlaying different task lists onto a calendar, but does not detail how to
    overlay the results from the content query onto a calendar.

  • Unable to copy database with different name in the same instance

    I had a huge database and wanted to try some change optimization changes.
    So wanted to make a copy of the database along with data in the same instance.
    I have tried copy database wizard several times but always see the error as in attachment.
    Can someone let me know how to troubleshoot further?
    If this is not the correct way please suggest how do i copy a database with different name in the same instance along with data.

    Hi Nandu,
    From the screenshot, the error 1813 happens when corrupt database log is attempted to attach to the SQL Server. To work around this issue, please preform the following steps, for more details, please review this
    blog.
    1. Create a new database with same name which you want to recover. Make sure that the MDF file and LDF file have same name with previous database data and log file.
    2. Stop SQL Server. Move original MDF file from old location to new location by replacing just created MDF file. Delete the LDF file of new location just created.
    3. Start SQL Server. At this point, the database is in suspect status.
    4. Make sure that system tables of Master database allows to update the values. Please note that you will be performing this in query window.
    Use Master
    go
    sp_configure 'allow updates',1
    reconfigure with override
    go
    5. Change database mode to emergency mode.
    SELECT *
    FROM sysdatabases
    WHERE name = 'DatabaseName'
    BEGIN
    UPDATE sysdatabases
    SET status = 32768
    WHERE name = ' DatabaseName '
    COMMIT TRAN
    6. Restart SQL Server. Then execute the following DBCC command in query window to create new log file.
    DBCC TRACEON (3604)
    DBCC REBUILD_LOG(databasename,'c:\yourdatabasename_log.ldf')
    GO
    7. Reset the database status using following command.
    sp_RESETSTATUS yourdatabasename
    GO
    8. Turn off the update to system tables of Master database running following script.
    USE MASTER
    GO
    sp_CONFIGURE 'allow updates',0
    RECONFIGURE WITH OVERRIDE
    GO
    9. Reset the database status to previous status.
    BEGIN
    UPDATE sysdatabases
    SET status = (value retrieved in first query of step 5)
    WHERE name = 'DatabaseName‘
    COMMIT TRAN
    GO
    Make sure that you have done all the steps in order and restarted SQL Server where it is mentioned. Also run SQL Server Management Studio as administrator.(Right click-> Run as Administrator)
    Thanks,
    Lydia Zhang

  • Mail sorting messages from different people in the same thread?

    I have this weird issue. It's happened before but I figured I might be able to figure this out.
    I got a response from somebody this morning and whats happening is, when I click on his response, the email shows up on the right like it should. However, ths email is from "Floyd" and shows as email "2". It shows another email below it in the "thread" from "Taryn" and has absolutely nothing to do with this email. The only similarities are the subject line which says "Poster". The "First" email from Taryn is from April. It seams as if it's sorting the emails by subject line. I don't want emails from different people in the same thread. Any thoughts on how to fix this issue? Image attached.
    OSX 10.8.4

    This question is about the same as mine.  I migrated all my data from old mac mini to new mac mini.  System screwed up and permission and owners were not setup.  Now I'm trying to salvage this mess.  I'm also trying to import mail, which I think should be on the computer but I don't know where.
    Same question where does the computer store Mail mail?
    Chuck

  • Hi can someone tell me if it is possible to have two accounts (from different countries) in the same laptop?

    Hi can someone tell me if it is possible to have two accounts (from different countries) in the same laptop?

    Hi...
    The issue is that your credit or debit card credentials must be associated with the same country where you reside to make purchases.
    "Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
    From here >  The Complete Guide to Using the iTunes Store | iLounge Article
    Billing policy is the same for both the iTunes as well as Mac App Stores.

  • How to create links to different files on the same page?

    Good day to all again,
    can someone please guide me through creating several links to different files on the same page. In other words, I am creating a photo page where my links are called Gallery 1, Gallery 2, etc... I would like to create links so when the User clicks on Gallery 1, they see Gallery 1 slide show in the frame; when the user then clicks Gallery 2, then they see Gallery 2 slide show in the window.
    My slide show files are done and I am using GoLive CS2. I have no knowledge of JavaScript or ActionScript/Flash.
    Any suggestions are highly appreciated.
    Thank you
    Alek

    Hi Diana,
    I'm a professional photographer and in the process of getting
    my finished site published. I used Coffeecup Photo Gallery. You can
    create multiple albums on the same page. Do a Google search for the
    address. It's easy, inexpensive, and it works. I tried to do this
    with the Photo Gallery in DW and FireWorks--but couldn't get it
    right. CC uses Flash and Javascript.
    Good Luck

  • How can I jump to certain region on the same page?

    Hi,
    I want to jump to certain region on the same page.
    1) Let say I have 5 regions on page 15 and I have to able to redirect from region 1 to region 5 with out scrolling.
    2) I have to able to branch from page 2 to page 15 ==> region 4.
    How can I do it?
    I thank you for any help in advance.

    I can get this to work but the page is submitted, either when I use a button with URL link or from a link on a display only text field.
    Is this how it is supposed to work? I thought it was supposed to work just on the browser so it is fast.
    IGNORE THIS!
    =============================
    I resolved it easily by modifying the URL from f?p=blah blah to #LINK_NAME
    Message was edited by:
    user530800

  • All of a sudden, my settings have been changed, my homepage, and EVERYTHING. No matter how many times I go in and change them again, the SAME pages open up when I start FireFox and I am constantly being asked if I want Yahoo as my start page and default s

    I don't know what happened. All of a sudden, my settings have been changed, my homepage, and EVERYTHING. No matter how many times I go in and change them again, the SAME pages open up when I start FireFox and I am constantly being asked if I want Yahoo as my start page and default search engine. I click the box 'do not ask me again' and it comes up EVERY TIME. I change things like I don't want history remembered, and when I reload FireFox again, it's back to the way it was BEFORE. EVERY SINGLE TIME. I don't know why this is happening, or how to fix it. What do I do??

    I do not want to download another virus program.. I do not believe it is a virus. I am running the full version of Norton 360 and it is doing a daily scan. I have Windows 7, 64 bit OS.
    This is very irritating !! If I wanted Yahoo I would ask for it !

  • How do i send hyperlink to a text box within the same page

    how do i send hyperlink to a text box within the same page on iweb

    It's called an anchor. It's often discussed in this forum.
    2 days ago : anchor
    Here's a search of the past year : anchors

  • How can i select some row from multiple row in the same group of data

    I want to select some row from multiple row in the same group of data.
    ColumnA        
    Column B
    1                  OK
    1                   NG
    2                   NG
    2                          NG
    3                          OK
    3                          OK
    I want the row of group of
    ColumnA if  ColumnB contain even 'NG'
    row , select only one row which  Column B = 'NG'
    the result i want = 
    ColumnA         Column B
    1                         NG
    2                   NG
    3                          OK
    Thank you

    That's some awful explanation, but I think this is what you were driving at:
    DECLARE @forumTable TABLE (a INT, b CHAR(2))
    INSERT INTO @forumTable (a, b)
    VALUES
    (1, 'OK'),(1, 'NG'),
    (2, 'NG'),(2, 'NG'),
    (3, 'OK'),(3, 'OK')
    SELECT f.a, MIN(COALESCE(f2.b,f.b)) AS b
    FROM @forumTable f
    LEFT OUTER JOIN @forumTable f2
    ON f.a = f2.a
    AND f.b <> f2.b
    GROUP BY f.a

Maybe you are looking for

  • ORA-12514 Fresh installtion of Oracle XE on Win XP

    I have a fresh installtion of Oracle XE on my Win XP machine. I am unable to view the databse home page using Start --> Programs --> Oracle Database 10g Express Edition --> Go To Database Home Page This gives "The page cannot be displayed" . Services

  • Serial numbers for availabel stock at a specified date

    Dear all, does anyone know how to get the serial numbers that correspond to the available stock of a material in a specific plant and storage location at a specified date? Is there a bapi, a function module or a class that can do this? For example, l

  • PDF to Keynote?

    I have a 35 page pdf file that looks like it was originally a Powerpoint presentation. Is ther an easy way to convert a pdf file to Keynote?

  • Do I *need* to open iPhoto to get Photostream photos into the iPhoto library?

    Hi all, I don't really use iPhoto that much but since I started using my iPhone 4S as my principle out-and-about camera rather than lugging my DSLR everywhere I have started using it to archive all my mobile snaps using Photostream so that there's on

  • Switching Gradient Type? Is it possible?

    Hi! Does anybody know, if it's possible to switch current gradient type (Radial, Linear etc.) with scripts, patchpanel, or either way programmatically in Photoshop? Thank you! Anastasiy