How to update partner data in shopping cart ?

Hi expert,
My requirement is to update the requester field in the Shopping Cart with another requester as well as some other CUF field. Through BBP_PD_SC_UPDATE i am able to update the CUF item fields but i am unable to update the business partner.
please help, its urgently...
regards,
Rahul

use the BAPI
'BAPI_BUPA_ADDRESS_CHANGE'.
it works
regards
Giridhar

Similar Messages

How to update partner function in PO.

Hi guys,
Please help me, How to update partner function in PO.(Transaction ME23N),BAPI_PO_CHANGE is not updating this.it gives error like partner roles not change.

DATA : li_return         TYPE TABLE OF bapiret2 WITH HEADER LINE,
             li_popartner    TYPE TABLE OF bapiekkop WITH HEADER LINE,
             lv_error           TYPE FLAG .
li_popartner-partnerdesc = X1.
li_popartner-langu       = sy-langu.
li_popartner-buspartno   = 'vendor1'.
APPEND li_popartner.
CALL FUNCTION 'BAPI_PO_CHANGE'
    EXPORTING
      purchaseorder = ebeln
    TABLES
      return        = li_return
      popartner     = li_popartner.
LOOP AT li_return.
    WRITE / li_return-message.
Check error
    IF li_return-type = lc_E OR li_return-type = lc_A.
      lv_error = 'X'.
    ENDIF.
ENDLOOP.
IF lv_error IS INITIAL.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDIF.
Is there any config issues are there And also I am going to pass any values .
HI,
How to update the confirmation tab in PO item level.
I write this code tell me i am going to pass any values or not.
DATA:
    li_ekes               TYPE STANDARD TABLE OF uekes .
CALL FUNCTION 'ME_CONFIRMATION_UPDATE'
                      EXPORTING
                        I_EBELN = lwa_z1confirmations-ebeln
                      TABLES
                        XEKES   = li_ekes.
                    IF sy-subrc EQ 0.
                    ENDIF.

System is not checking Account assignment data in shopping cart

Dear Experts,
We are implementing SRM7 with SP06. We are using extened classic scenario. Recently we have noticed that system is not validating account assignment data at shopping cart level and creating purchase order in SRM, however at the time of PO transmission to backend system it is failing.
Does any one has faced this issue?If yes help me how to resolve this issue.
Thanks in advance.
Umakanth

Hello Umakanth,
Could you check if in your settings for Define backend system customizing ( BBP_BACKEND_DEST table), option "realtime backend validation of FI data" is set or not ?
Regards.
Laurent.

How to update the data in sqlserver table using procedure in biztalkserver

Hi,
Please can any one answer this below question
how to update the data in sqlserver table using procedure in biztalkserver
while am using executescalar,typedprocedure getting some warning
Warning:The adapter failed to transmit message going to send port "SendtoSql1" with URL "mssql://nal126//MU_Stage2?". It will be retransmitted after the retry interval specified for this Send Port. Details
Please send me asap....
Thanks...

Hi Messip,
A detailed error would have helped us to answer you more appropriately but
You can follow the post which has step by step instructions, to understand how to use Stored Procedure:
http://tech-findings.blogspot.in/2013/07/insert-records-in-sql-server-using-wcf.html
Maheshkumar
S Tiwari|User
Page|Blog|BizTalk
2013: Inserting RawXML (Whole Incoming XML Message) in SQL database

How to display error message in Shopping Cart?

How to display error message in Shopping Cart and stop the shopping cart for further processing? I try MESSAGE w001(zshop) or MESSAGE e001(zshop). But it is causing run-time error.

Hi Paul,
In the DOC_CHECK or DOC_SAVE BADI, you have a global internal table named et_messages. The structure of this table is 'bbp_smessages_badi'. You can append your error message here by inputting the message type, ID and number. The message type is either 'E' for error or 'W' for warning and the number would depend on your message class(ID). You will be able to see the error message on top of the screen, can be a red or yellow highlight depending on your appended message. I don't think creating the error message via the MESSAGE syntax will be successful, maybe this is why you are getting a runtime error.
Regards,
Noel

How to update transaction data automatically into MySQL database using PI

Dear All,
With reference to subject matter I want a sincere advice regarding how to update transaction data automatically into MySQL database using PI. Is there any link available where I can get step-by-step process.
Ex: I have a MYSQL database in my organization. Whenever a delivery created in SAP some fields like DO Number, DO quantity, SO/STO number should get updated in MYSQL database automatically.
This scenario is related to updation of transactional data into MYSQL DB and I want your suggestions pertaining to same issue.
Thanks and Regards,
Chandra Sekhar

Hi .
Develop a sceanrio between SAP to Database system,When the data updates in SAP Tables read the data and update it in DATA Base using JDBC adapter,but there will be some delay in updating data in MySQL.
serach in sdn for IDOC-TOJDBC sceannario,many documents available for the same.
Regards,
Raja Sekhar

How to update cgicmd.dat file during runtime?

I'd like to know how do update cgicmd.dat file during runtime. For example, I run a report one.jsp as
http://<machine>:<port>/reports/rwservlet?one.jsp&USERID=uid/pwd@db&DESTYPE=cache&mode=bitmap&desformat=htmlcss
within this report there is a hyperlink to open another report named two.jsp.
before creating this hyperlink, I'd like to update cgicmd.dat file with passed in userID, pwd, and connection, so two.jsp can use this key for userinfo
so I can create hyperlink as follows
srw.set_hyperlink('/reports/rwservlet?report=two.jsp'||
'&cmdkey=userinfo&DESTYPE=cache&mode=bitmap&desformat=htmlcss');
Thanks

To my knowledge the cgicmd.dat is only read when the OC4J starts, so you would have to come up with another solution. Using Single-Sign-On (SSO) is quite a good idea, and it's there for cases like this.
Regards,
Martin Malmstrom

Need information regarding Approver and approved date of Shopping Carts

Dear All,
We have got a requiremrnt to extract a list approvers and approved dates of shopping carts created for a given department and date range.
Is there any standard way to find that?
If we need to create a Z report please let us know the tables invovled.
Thank you.
Regards
Arindam

Hi
Each approval step in SRM has got a work item guid and its relevant data stored in few Data tables. You may build a custom report to meet your requirements.
Refer to this post for more details:
Re: SRM table which stored shopping cart approval start and end time
Regards
Virender Singh

How to UPDATE MASTER DATA RECORD PA0377 using FM HR_INFOTYPE_OPERATION

How to UPDATE MASTER DATA RECORD IN INFOTYPE 0377 DIRECTLY using function module HR_INFOTYPE_OPERATION ? When i use operation = 'MOD' im getting an ERROR as NO DATA STORED FOR 0377 IN SELECTION PERIOD.
       Can anyone please help me how to use HR_INFOTYPE_OPERATION to UPDATE MASTER DATA RECORD.
Thanks,
Karthi.

Hi,
please check this code
it is very useful
infotypes: 0105.
parameters: p_pernr type p0105-pernr,
            p_subty type p0105-subty,
            p_begda type p0105-begda,
            p_endda type p0105-endda,
            p_opera type pspar-actio,
            p_usrid type p0105-usrid,
            p_commt as checkbox.    "Useful only when NO_COMMIT is 'X'
data: w_return type bapireturn1,    "Error handling data
      w_key type bapipakey,         "If record has been created or changed the created/ changed
                                    "record's key (PSKEY) will be populated
      v_message type string.        "For printing returned messages
call function 'BAPI_EMPLOYEE_ENQUEUE'
exporting
    number = p_pernr
importing
    return = w_return.
if w_return is initial. "Employee is not locked
p0105-pernr = p_pernr.
p0105-subty =
p0105-usrty = p_subty.
p0105-begda = p_begda.
p0105-endda = p_endda.
p0105-usrid = p_usrid.
*Calls Internally HR_MAINTAIN_MASTERDATA
call function 'HR_INFOTYPE_OPERATION'
    exporting
      infty         = '0105'
      number        = p_pernr
      subtype       = p_subty
      validityend   = p_endda
      validitybegin = p_begda
      record        = p0105
      operation     = p_opera
      dialog_mode   = '0'
      nocommit      = 'X'
    importing
      return        = w_return
      key           = w_key.
endif.
if w_return is not initial.
message id w_return-id type w_return-type number w_return-number
          with w_return-message_v1 w_return-message_v2 w_return-message_v3
          w_return-message_v4 into v_message.
case w_return-type.
    when 'A' or 'E'.
      format color col_negative. write:/ v_message.
    when others.
      format color col_heading. write:/ v_message.
endcase.
call function 'BAPI_EMPLOYEE_DEQUEUE'
    exporting
      number = p_pernr.
else.
format color col_positive. write:/ 'Record Updated Successfully.'.
if w_key is not initial.
    write:/ 'Key contains',
          / 'Personnel Number:', w_key-employeeno,
          / 'Subtype (absence type):', w_key-subtype,
          / 'Start date of Absence:', w_key-validbegin,
          / 'End date of Absence:', w_key-validend.
endif.
commit work.
endif.
Thanks and regards
durga.K

How to update additional data for a premise in ISU?

Hi Experts,
Does any1 have any ideas about how to update additional data (Such as number of premises, flat area) for a premise? I mean not use ISU_DB_EWA_VBS_UPDATE directly. I tried to use ISU_S_PREMISE_CHANGE to update the data, but I do not konw how to use the parameters, can any1 help?
Thx in advance, points will be rewarded.
Vincent.

Hi Vincent,
Here is an example coded by me. Hope this is useful to you. If so, please reward points.
l_premise = '0000004454'.
CALL FUNCTION 'ISU_S_PREMISE_PROVIDE'
EXPORTING
    x_vstelle            = l_premise
    x_wmode              = '1'
X_TEILOBJ            =
IMPORTING
Y_OBJ                =
   y_auto               = x_auto
EXCEPTIONS
   not_found            = 1
   foreign_lock         = 2
   general_fault        = 3
   not_authorized       = 4
   invalid_wmode        = 5
   OTHERS               = 6.
IF sy-subrc <> 0.
ENDIF.
x_auto-evbsd-haus_num2 = '99999'.
CALL FUNCTION 'ISU_S_PREMISE_CHANGE'
EXPORTING
    x_vstelle            = l_premise
    x_upd_online         = 'X'
    x_no_dialog          = 'X'
    x_auto               = x_auto
X_OBJ                =
X_NO_OTHER           =
IMPORTING
Y_DB_UPDATE          =
Y_EXIT_TYPE          =
Y_NEW_EVBS           =
EXCEPTIONS
   not_found            = 1
   foreign_lock         = 2
   input_error          = 3
   general_fault        = 4
   not_authorized       = 5
   OTHERS               = 6.
IF sy-subrc <> 0.
ELSE.
COMMIT WORK.
ENDIF.
Thanks,
Pranjal.

How to update additional data for Premise in ISU?

Hi Experts,
Does any1 have any ideas about how to update additional data (Such as number of premises, flat area) for a premise? I mean not use ISU_DB_EWA_VBS_UPDATE directly. I tried to use ISU_S_PREMISE_CHANGE to update the data, but I do not konw how to use the parameters, can any1 help?
Thx in advance, points will be rewarded.
Vincent.

Hi Vincent,
Here is an example coded by me. Hope this is useful to you. If so, please reward points.
l_premise = '0000004454'.
CALL FUNCTION 'ISU_S_PREMISE_PROVIDE'
EXPORTING
    x_vstelle            = l_premise
    x_wmode              = '1'
X_TEILOBJ            =
IMPORTING
Y_OBJ                =
   y_auto               = x_auto
EXCEPTIONS
   not_found            = 1
   foreign_lock         = 2
   general_fault        = 3
   not_authorized       = 4
   invalid_wmode        = 5
   OTHERS               = 6.
IF sy-subrc <> 0.
ENDIF.
x_auto-evbsd-haus_num2 = '99999'.
CALL FUNCTION 'ISU_S_PREMISE_CHANGE'
EXPORTING
    x_vstelle            = l_premise
    x_upd_online         = 'X'
    x_no_dialog          = 'X'
    x_auto               = x_auto
X_OBJ                =
X_NO_OTHER           =
IMPORTING
Y_DB_UPDATE          =
Y_EXIT_TYPE          =
Y_NEW_EVBS           =
EXCEPTIONS
   not_found            = 1
   foreign_lock         = 2
   input_error          = 3
   general_fault        = 4
   not_authorized       = 5
   OTHERS               = 6.
IF sy-subrc <> 0.
ELSE.
COMMIT WORK.
ENDIF.
Thanks,
Pranjal.

How the business partner data is created in EB

Hi
How the business partner data is created in EB ( SRM).
thanks
sankar

Hi,
I imagine you would like to synchronize business partner data, which are created in backend, into SRM.
you can use Tcode BBPGETVD or BBPUPDVD or run/schedule bbp_vendor_sync (need customizing).
Regards,
Bertrand

How to update the data the transparent table CKMLMV013 ?

How to update the data the transparent table CKMLMV013 ?
can you please replay asap.
thanks,
samba

Hi,
if you do a "where used" search of the table CKMLMV013 you will see that it is updated in several places:
e.g. fm CKML_ORDER_CONNECTION_UPDATE
Have a look at those places where the table is updated.
Best regards.

How to update partner in SRM ?

Hi expert,
i have a requirement for updating the requester field in the shopping cart.
Can u all please help me out on this.
If some program code u have please send me ..
Regards,
Rahul

DATA : li_return         TYPE TABLE OF bapiret2 WITH HEADER LINE,
             li_popartner    TYPE TABLE OF bapiekkop WITH HEADER LINE,
             lv_error           TYPE FLAG .
li_popartner-partnerdesc = X1.
li_popartner-langu       = sy-langu.
li_popartner-buspartno   = 'vendor1'.
APPEND li_popartner.
CALL FUNCTION 'BAPI_PO_CHANGE'
    EXPORTING
      purchaseorder = ebeln
    TABLES
      return        = li_return
      popartner     = li_popartner.
LOOP AT li_return.
    WRITE / li_return-message.
Check error
    IF li_return-type = lc_E OR li_return-type = lc_A.
      lv_error = 'X'.
    ENDIF.
ENDLOOP.
IF lv_error IS INITIAL.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDIF.
Is there any config issues are there And also I am going to pass any values .
HI,
How to update the confirmation tab in PO item level.
I write this code tell me i am going to pass any values or not.
DATA:
    li_ekes               TYPE STANDARD TABLE OF uekes .
CALL FUNCTION 'ME_CONFIRMATION_UPDATE'
                      EXPORTING
                        I_EBELN = lwa_z1confirmations-ebeln
                      TABLES
                        XEKES   = li_ekes.
                    IF sy-subrc EQ 0.
                    ENDIF.

How to Add new fields to Shopping cart?.

Hi SRM GURU'S,
I am using SRM 5.5 and ECC 6.0 and Extended Classic scenario.
As per business, I want to add New fields to Shopping cart. How can I add?. Please any one give me clear details about this
I am planning to add 2 fields 1. Commitment Item and 2. Fund center. in Cost Assignment tab. Is it possible?. This data has pass to follow on documents. Backend documents has this provision. Is this option available in Shopping cart?. If yes please give me the details.
Kindly respond quickly. Thanks in Advance.
Regards,
John.
Edited by: johnmiller465 on Sep 22, 2009 1:13 PM
Edited by: johnmiller465 on Sep 22, 2009 1:18 PM

Hi Deepti/Shital,
Thank you so much for your reply. I have awarded points. One more question. While creating creating PO from Process Bid Invitation, PO is not replicating into ECC. Do you have any idea?. Please help me to findout. Respond quicklly
If it will not replicate, how to create backend PO refering with SRM PO.
Regards,
John.
Edited by: johnmiller465 on Sep 23, 2009 11:53 AM
Edited by: johnmiller465 on Sep 23, 2009 11:55 AM

How to update partner data in shopping cart ?

Similar Messages

Maybe you are looking for