How to update standard table based on the custom table

Hi,
I have requirement , I have custom table whatever changes done to the custom table must be updated in the standard table
i have tried the table maintenance events but unable to handle delimit , what is the base solution for this.
1) create
2) change
3) delimit
4) delete
6)copy

the table im updating is t710
the custom table is same as the standard table except for one field . whatever the user maintains the values in custom table except for the one field everything should update back to the standard table. Im able to update when we create delele but the problem is delimition. when im delimiting the record in custom table its just changing the startdate and it is not actually delimiting the record itself .I want both records the latest one and previous one and should be update back into the standard table same as the custom table

Similar Messages

How to enable the DFF in OAF page(where Dff is based on the custom table).

Hi Experts!!
I am in the process of enabling the dff in OAF page. I am not able to enable the dff if am using the Custom table.
Ex:
Assume that my DFF XX_DFF is using the custom table XX_TABLE of att1,att2..
I am able to enable the dff in OAF page but not able to make those values entered to get stored in the custom table.
I need helping hands to help me out to get the entered dff values stored in my custom table.
Kindly provide me the steps so that I can follow up..
Best wishes,
Thiru.

Hi,
thiru_apps wrote:
I need to store the captured values of Dff(which was enabled in the seeded page based on the custom table XX_Table) and the same needs to be stored into the custom table xx_Table.
Basically the entered values for the DFF enabled should have to be get stored in the XX_TABLE(Custom TAble).As per my understands in Standard page u want create some extra fields and those should be save in custom table...is it ...
For that u r going create stack layout region in standard page via personalization and extend with custom region.
IF im geting u correctly u need to write code in co and am.
---U had already created the components eo vo AM co...
---For the custom region in Jdev do the mapping of viewInstacne and view attribute properties for the fields.
---In AM:
public void CreateVo(OAPageContext pageContext, OAWebBean webBean)
Row hrow;
OADBTransaction tr=getOADBTransaction();
EOVOImpl vo=getEOVO1();
if(!vo.isPreparedForExecution())
vo. executeQuery();
hrow=vo.createRow();
vo.insertRow(hrow);
hrow.setNewRowState(Row.STATUS_INITIALIZED);
public void savetr()
OADBTransaction tr=getOADBTransaction();
tr.commit();
In Co ProcessREq:
AMImpl AM=(AMImpl)pageContext.getApplicationModule(webBean);
AM.CreateVo(pageContext, webBean);
In Co ProcessFormREq:
---GEt the event of the save button of the standard page
if(pageContext.getParameter("save")!= null)---DI of the standard page
AM.savetr(pageContext, webBean);
Regards
Meher Irk

How to update a form after changing the underlying table

Hi All,
I have read a few posts on this, and I know that it would have been better to not do this, but I had to add a new column to a table in order to meet a new requirement.
See this post:
Design Question - Slowly Changing Dimensions (I think)
I decided that I would store the 'price' with the 'mailed_item' - so I had the actual price at the time the item was mailed. And then the MST table could be updated as needed without impacting the historic records.
Now my issue is: How do I add another field to the form (I was thinking hidden) that would reference the price from the Mail_Service_Type table?
Mailed_Item
ID
MST_ID (Mail_Service_Type FK)
Piece_Count
Price (**New)
Mail_Service_Type
ID
Name
Weight
Price
Can this be done easily, or should I recreate the form? Is is just a simple PL/SQL or SQL statement? Or should I build another process (maybe a trigger) to get the value?
Any thoughts would be appreciated...
Corey

Nahman,
Typically it's enough to re-load data used: check binding of your UI controls on second tab to context attributes and depict what nodes are used. Then re-initialize these nodes: either just via invalidating them or via re-binding elements / re-executing queries + re-binding elements.
Valery Silaev
SaM Solutions
http://www.sam-solutions.net

How to synchronize several operators based on the same table

One of our tables is used in several different mappings.
When we make changes to the table, we have to open one by one all the mappings that use that table and then synchronize the table operator.
Does anyone know a way of doing this automatically? Something that allows us to select the table and click the "Synchronize" button so that all the operators based on that table are automatically synchronized.
Regards
Juan Algaba

Hi Juan,
You can do this with a OMB Plus script, I haven't found the exact post, but some months ago I copied this script from another thread on this forum, and modified it to use on my purpose:
set testProj "TEST_DEMO_PROJ"
set recModule "DWH"
OMBCC '/$testProj/$recModule'
foreach recMapping [OMBLIST MAPPINGS] {
set tabList [ OMBRETRIEVE MAPPING '$recMapping' GET TABLE OPERATORS ]
foreach TabOpName $tabList {
set tabPath [split [lindex [OMBRETRIEVE MAPPING '$recMapping' OPERATOR '$TabOpName' GET BOUND_OBJECT] 1] '/']
set tabProjName [lindex $tabPath 1]
set tabModuleName [lindex $tabPath 2]
set tabName [lindex $tabPath 3]
OMBRECONCILE TABLE '/$testProj/$tabModuleName/$tabName' TO MAPPING '$recMapping' OPERATOR '$TabOpName' USE (RECONCILE_STRATEGY 'REPLACE', MATCHING_STRATEGY 'MATCH_BY_OBJECT_NAME')
OMBCOMMIT
This script reconciles all table operators, of all the mappings in a module, you can fix the tabPath variable and look for it in all the mappings of a module, to know if you have to RECONCILE the TABLE OPERATOR or if is bound to another table.
Regards
ANA GH

How to call standard SAP method in the Custom Program ?

Hi,
i need to call sap standard method 'OpenItemRollinout' in my custom program. For the SAP Standard method 'OpenItemRollinoun' the BOR(Business Object) is 'PAYSCHEME'. So how to call the SAP standard method in the custom program ???

Hi,
In the method that you have provided only one function module is being used so better use the FM and copy the remaining code based on ur requirement.
FM is ISU_S_PAYSCHEME_ROLLIN_ROLLOUT.
Regards,
Vijay.

Two LOVs in same UIX page based on the same table

Hi group,
Recently I ran into a problem with a UIX page that has two LOVs based on the same database table. In Emp and Job terminology, here's what I tried to do.
Suppose we have use the Employees and Jobs tables from the HR scheme with one small modification. Add a column called PREFERRED_JOB_ID of type VARCHAR2(10) which is exactly the same as JOB_ID. Hypothetically speaking, this column will be used to allow Employees to select their preferred job in case they want to change their jobs.
Next, create business components in JDeveloper based on the Employees and Jobs table. In order to be able to generate the LOVs for Job and PreferredJob create two ViewObjects, one called JobsLookupView and one called PreferredJobsLookupView. These both need to be based upon the same Jobs EntityObject. Also include the Jobs EntityObject twice in the EmployeesView ViewObject and give one the alias PreferredJobs. Include the JobTitle attributes of Jobs and PreferredJobs in EmployeesView so they can contain the JobTitles selected in our future LOVs.
Next create a ViewController project if it's not already there and enable JHeadstart on it. Create an Application Structure File and create the lookups for the two LOVs. When I run the application I see this happening:
When I click the flashlight icon next to the PreferredJob LOV and select a job, the PreferredJob field is selected in the UIX page but no job title appears. When I next first select the Job LOV and select a new job and then select the PreferredJob LOV again and select a different job, the job that was selected in the Job LOV is now also entered in the PreferredJob field. When I make sure the PreferredJob field isn't required (remove the required="yes" property on the messageLovInput entry for PreferredJobTitle and remove the PreferredJobTitle field from the addRequiredRowItems list in the UIX page) I can save the changes I made in the Employees.uix page. The same JobId is stored in the database for Job and PreferredJob.
This behaviour is probably due to cacheing issues because both LOVs and the EmployeesView ViewObject use one EntityObject for four values in three ViewObjects.
So I then modified my model a bit. I created a new EntityObject called PreferredJobs based on the JOBS table. I modified the EmployeesView ViewObject to use this EntityObject for the PreferredJobTitle attribute and modified the PreferredJobsLookupView to use this EntityObject.
I needed to modify a few things as well in the Application Structure File (which were prompts and whether or not the attribute should be visible in a table) and after regenerating I made sure the PreferredJob attribute isn't required in the UIX page. When I then run the application again, I never see the JobTitle I select in any LOV allthough the PreferredJob field is selected when I select a Job in the PreferredJob LOV. The correct JobId now is stored in the database though.
Has anyone ever encoutered this behaviour? Would anyone know how to get two LOVs based on the same table in one UIX page?
Thanks in advance,
Wouter van Reeven
AMIS

OK I figured it out. When I added the second Lookup ViewObject (PreferredJobs) no additional Association was created. Therefore, ADF BC wasn't able to figure out which field to update. When I added the Association between the PreferredJobs Lookup ViewObject and the Employees ViewObject everything started working ok.
I then recreated my inital situation: one EntityObject for Jobs and one for Employees, now with two Associations between them. After modifying the Employees ViewObject and making sure the Jobs EntityObject was referred twice and via the corresponding Association, everything started working ok.
Greets, Wouter
AMIS

How to find out the volume of the data updated in the custom table

Hi,
I need to find out the the volume of the data inserted or updated in the the custom table(Y tables).I have tried by the sm37.the job running in to update the table but i didnot get thde amount of the data.and if get the volume of the data which being updated in the custom table is there any option to control that amount to being updated?
Thanks in advance .....waiting for the respone.

Hi Sreenivas.
How did you find the solution to this? Trying to do the same thing!
Cheers,
Tom

How to Create a Validation based on a Z table

I want to create a validation for t-code FB50 so that for any line item that contains a GL Account listed in a table, the validation would then check to see if the field Trading Partner is populated.
My question is How do I set up the validation so that the values in the table are referenced? I don't want to have to continually update the valid GL accounts in a set. I want the table to hold the values. The business users have a custom t-code to update the values in the Z table.
The Z table contains the field HKONT (GL Account). The table contains 1 record (it could contain more) with GL Account 123456.
My attempt was to create a set (Z_TP_ACCTS) that was based on the Z table and the corresponding field. I then set up my validation to compare the value entered in FB50 (BSEG-HKONT) to look at the set. My understanding is that the value would be compared to the values in the table, but my tests are failing. I did not enter any values in the set.
Any advice / help would be appreciated.

Hi
You will have to use an user exit to call up the Z Table to check for your requirement. There are lot of postings on SDN to use an user exit in FI Validations. The standard module pool provided by SAP is RGGBR000 for FI Validations. You can write a form in this.
Additionally you also have the option of using a BTE for this. The one I can recollect are 00001011 or 00001085
Thanks & Regards
Sanil Bhandari

How to maintain the sequence in the custom table

Hi,
We have custom table where we will store the standard text name based on different flags and it will be fetched the value according to the condition.
Example code
SELECT SINGLE field1
                  field2
             INTO ( vaiable1 variable2 )
             FROM custom table
            WHERE tdobject = iv_signature
              AND bukrs    = vbdkr-bukrs
              AND vkorg    = iv_vkorg
              AND vkbur    = iv_vkbur
              AND lland    = vbdkr-land1
              AND fkart    = vbdkr-fkart
              AND kschl    = iv_kschl.
CHECK sy-subrc <> 0.
SELECT SINGLE field1
                  field2
             INTO ( vaiable1 variable2 )
             FROM custom table
            WHERE tdobject = iv_signature
              AND vkorg    = iv_vkorg
              AND vkbur    = space
              AND fkart    = vbdkr-fkart
              AND kschl    = iv_kschl.
CHECK sy-subrc <> 0.
SELECT SINGLE field1
                  field2
             INTO ( vaiable1 variable2 )
             FROM custom table
            WHERE tdobject = iv_signature
              AND vkorg    = iv_vkorg
              AND vkbur    = space
              AND fkart    = vbdkr-fkart
              AND kschl    = space.
The solution I created to avoid the select is, i have created the FM with all parameter. Addition to the FM, I have created a Table as well to maintain the flag.
New table
TDOBJECT   TDID BUKRS VKORG VKBUR KUNNR      MWSKZ AUART VGBEL_AUART KTGRM LLAND FKART WERKS KSCHL STNAME
FOOTER                                                                           X     X           ZNET_DICI_FTR_FI
FOOTER                                                                           X     X           ZNET_DICI_FTR_NL
FOOTER                X     X                                                    X
i.e. say example if we maintain the value in the custom table based on the first select query. Then we need to maintain the flag in the table which was created newly.
Note In the both field the key fields are same.
The problem now is we have plenty of select query for different condition, i though of maintain the sequences of the entries. But my worry is how many sequence number will be maintained and in what bases it will be maintained.
Could you please help me to resolve this problem?
Regards,
Vijay

Hi,
I got your requirement as,
whenever a new entry is made in the table, one sequence has to be maintained somethign like serial number and everytime it has to be incremented. If it is so, then you can go for an additional field as serial number. Then get the max serial number from the following select query:
select max(serial) from cust_table
into v_serial.
Now, when you make a new entry, just give (v_serial + 1) to serial number...
Please let me know if i understood wrongly... or what you want...

I want to update the Custom table using the data available in ITAB.

Hi,
I want to updaste the Custom Table which is created by me (Ztable) using the data available in itab.(which i got from defferent standard tables)
I want to update the custom table using the itab data How is it possible?
Is any possible by using Modify ?
DPK.

example here
modifying datbase table useing internal table
advises before updating this datbase table plz lock that table to avoid incosistency
write the logic for modifying
Modify the database table as per new dunning procedure
MODIFY fkkvkp FROM TABLE lt_fkkvkp .
and finally unlock the table
example
*To lock table for further operations
constants: lc_tabname TYPE rstable-tabname VALUE 'FKKVKP' . "FKKVKP
CALL FUNCTION 'ENQUEUE_E_TABLE'
EXPORTING
tabname = lc_tabname
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3.
IF sy-subrc EQ 0.
To fetch all the contract accounts for customers of the segment
Households/SME.
PERFORM fetch_contract_accounts using lc_tabname .
ENDIF. " IF sy-subrc EQ 0.
*wrote the logic
Modify the database table as per new dunning procedure from internal table
MODIFY fkkvkp FROM TABLE lt_fkkvkp .
*unlock the tbale
CALL FUNCTION 'DEQUEUE_E_TABLE'
EXPORTING
TABNAME = uc_tabname .

How to create the custom table?

Hi, how to create the custom table and how to integrate the table with defferent R/3?
my requiremnt is i have to create the two tables and those i have to integrate with the existed R/3 and using those R/3 i have to update my custom tables .....can give me some idea?
Tks
DPk

how to create the custom table
There are two approach in creating a table.
1. Bottom-up approach
2. Top-down approach.
Both are valid and you can choose which approach is suitable for you. I always use the bottom-up approach. Here are the steps to create the tables with this approach.
1. SE11 will take you to the DDIC and enter the name of the new table to be created. Let us say Zname. Click create.
2. Enter the short discription of the table and enter the field of the table. If it is primary key and you have to check the box.
3. Enter the data element and double click it, you will be asked to save and will take you to data element discription page. Enter the short discription of the data element and enter the information of domain like the length of field and type of field.
4. If you wanted to use the existing domain then its fine, or else, you have to create one. Enter the domain name in the data element page and double click it. Page will ask to save and jump to domain creation page.
5. In the domain page, you have to save the information which you have already given in the data elements page and check it. Before going to data element page, you have to activate the domain.
6. Go to data element page and save, check and activate.
7. Go to main table page and save, check, and activate.
8. Also, you have to save the technical settings of the table.
The table is now ready for operation. You can use it in your program or you can use it to enter information.
Check table: It is the table which will have all the information about the Foreign keys which are the primary keys in the check table.
It can be created by creating the foreign key from the main table. Click foreign key in the main table and it will take you to a page which will ask for table name and field to which foreign key relation has to be associated. Enter the information and you can create the check table automatically.
SM30 is used for maintenance of the table, that is to realease the errors occured during the creation of the table.
how to integrate the table with defferent R/3
Transport the Table to the another server/client/qas/prd
Kanagaraja L

How to create an ODS based on a particular table

Can Anybody tell me how to create an ODS based on a particular table and what are the basic requirements for that

Hi Priya,
If my understanding is right, you want to create an ODS based on a database table.
Here, I will assume that you already know how to create an ODS. Otherwise, do let me know so that I can guide you on how to do it.
Basically, an ODS consists of two important sections i.e.
1. Key Fields
2. Data Fields
First, we must identify what are the field(s) in the table that make its records unique. You can think of this as database's primary key(s) e.g. Document Number. These field(s) must be inserted in ODS' Key Fields section. You can only insert Characteristics in Key Fields and the InfoObjects in this section will uniquely identify an ODS record or line item.
Next, you can include the rest of the fields (either Characteristics and Key Figures) in ODS' Data Fields and activate the ODS.
Having done that, you have already successfully create an ODS based on a database table.
Hope that helps.
Best wishes,
Syuhair.

How to find out the user who has created a new field in the custom table.

How to find out the user details who has created a new field in the custom table.
Thanks,
Joan

Hi Jesudasan ,
You can know the user details with version management.Please find the
below procedure to know.
Go to table->Utilities tab->version->Version management->Compare the previous one .
Hope this solves the issue,Let me know if you have any issues.
Thanks,
Rajani

Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the rows? Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the records?
Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

The Oracle documentation has a good overview of the options available
Generating XML Data from the Database
Without knowing your version, I just picked 11.2, so you made need to look for that chapter in the documentation for your version to find applicable information.
You can also find some information in XML DB FAQ

How to create a record based on the name of a file in the file-system?

Hi,
With a lot of pictures I want to have a database to gather some information about these pictures.
First question is how to generate a record based on a file in the file system?
e.g. the pictures are "c:\fotos\2009\01\disc_001.jpg" to "c:\foto\2009\01\dis_98.jpg" .
now i want to create records with as one of the attributes the name of the picture (not the picture itself). how to create these records (based on the information of the file-ssytem). i.e. the number of records should be the same as the number of pictures.
any suggestions?
any reaction will be appreciated.
Leo

Link to Create directory
http://www.adp-gmbh.ch/ora/sql/create_directory.html
You can create a list of files in the directory and read the list files from that directory.
[UTL_FILE Documentation |http://download.oracle.com/docs/cd/B14117_01/appdev.101/b10802/u_file.htm#996728]
[Solution using Java|http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:439619916584]
SS

How to update standard table based on the custom table

Similar Messages

Maybe you are looking for